Related
I'm having an issue when the Focus is charging. In this state, the lock screen will not slide up to give me access to the phone. Typically it will slide up about 1/4" only then comes back down.
Is there a setting for this or is this a feature ;-}
Anyone else having similar issues?
Problem Solved! See post 5.
I am able to unlock my phone while charging. Have you tried rebooting the phone and seeing if the problem persists after that?
Mine if fine and can lock/unlock/use while charging.
I can unlock, but I can't get into the settings menu at all when it's charging. I can do everything else, and get into settings in other ways if they're linked from a program, just not through the main interface while charging. It's very strange.
Problem Solved - Don't buy AT&T ZERO Charger Kit
Hi Everyone,
I found the problem causing my Focus to "pseudo Lock up" when charging.
As I was troubleshooting this problem, I first noticed my focus did not lockup when using a car charger or when plugged into my computer. This led me to consider why it was only happening when plugged into the wall. So, I tried a different charger, the one which came with my Focus, and there was no problem. Then I tried the charger that came with my Tilt 2, working fine there too.
So the problem is with the wall charger I was using. This charger is the AT&T ZERO Charger Kit. At this point, I am not sure if it the problem is with the individual charger or with the ZERO brand. I will be returning this charger tonight and at that time will ask them to allow me to try another one to see if the same problem manifests.
I will report back to let you all know.
MardiG said:
Hi Everyone,
I found the problem causing my Focus to "pseudo Lock up" when charging.
As I was troubleshooting this problem, I first noticed my focus did not lockup when using a car charger or when plugged into my computer. This led me to consider why it was only happening when plugged into the wall. So, I tried a different charger, the one which came with my Focus, and there was no problem. Then I tried the charger that came with my Tilt 2, working fine there too.
So the problem is with the wall charger I was using. This charger is the AT&T ZERO Charger Kit. At this point, I am not sure if it the problem is with the individual charger or with the ZERO brand. I will be returning this charger tonight and at that time will ask them to allow me to try another one to see if the same problem manifests.
I will report back to let you all know.
Click to expand...
Click to collapse
I second this! I was using an LG charger with same specs as the charger that came with Focus. It charged it but wouldn't let me use a lot of features of the phone. The stock charger works fine, as I use it at work all day. Another day of streaming from Zune and Last.FM for 6-7 hours!
Do not buy the AT&T ZERO Charging Kit
Hi Everyone,
So I confirmed the AT&T ZERO Charging Kit does not work properly with the Samsung Focus.
I returned the wall charger I purchased and while at the store, we opened another unit and tried it and the problem replicated.
At this point, I do not know if the problem is limited to the Focus or is all Windows Phones. If anyone else has a ZERO wall charger, and a different phone, please let us know your findings.
Do not buy this device to use with a Focus as it is not compatible with the Focus.
Same problem here - AT&T Zero charger and Focus will not unlock when charging. When I take the cable out of the charging brick and plug the cable into a USB port on my computer the phone resumes charging AND unlocks just fine.
The iGo charger that I have works fine no lock screen issues.
On a separate note, my work exchange server mandates the lock screen, but unlike WinMo 6.x you can't set the time interval when the lock screen activates. I had mine at 24 hours of dormancy before it would activate. WP7 only allows you to keep the screen on longer. I hope they add some more options for this. I can't stand having to punch in the four digit code every time I use the phone.
I am using the stock charger and it slides up 1/4 of the way several times then it finally sides up. The touch is then slow to respond, but it eventually works again. Anyone else having this issue? I have tried this charger and an old Tilt 2 charger.
Review of AT&T Zero Charging Kit
There is a review of the AT&T ZERO Charging Kit at:
http://cwmcgowen.wordpress.com/2010/11/28/review-att-zero-charging-kit/
This is the same charging kit that was incompatible with my Samsung Focus.
I should clarify the title by saying that trying to charge this phone is resulting in a number of odd results.
So firstly, I've tried using the wall-mounted AC charger. I then tried using USB on my computer, in 3 different usb ports. The phone was charging perfectly less than 24 hours before this problem began.
I plugged it in as per usual, and it didn't show the little lightning bolt on the batter icon like it should. It wasn't registering that it was plugged in. I tried plugging it into my PC, and it wasn't showing that it was connected via USB. In addition to that, my computer was failing to install the drivers for it. I went back to the AC charger, and tried a few different outlets, including one on a power strip. Nothing worked.
I searched online, and found that other people had this problem, and could only fix it by resetting to factory default settings. One person even had to do it twice to get it to work. So I did this, and it still didn't work. I tried charging my old phone with this Ac charger and cable, and it wouldn't work either. So I thought it must be a fault in the cable. So I dug up the cable (also micro-usb) for my old phone, and tried it. It worked just fine for my old phone, but my S4 still had the same problem, but with something new. It would say "Dock connected" but still not charge.
As of right now, it seems to be charging properly with my new AC mount and old usb cable, but I'm worried that this could happen again. Considering this seems to be a problem for other people too, what should I do about it? Is there some way to prevent this sort of thing from happening? Was it purely the other cable, given the fact that it didn't work with my old phone either? I'm on an extremely tight budget, and this phone is my only way of being contacted for job interviews, so having it in working order is very important. Any advice would be very appreciated!
Having exactly the same problem... couldn't find over the internet a solution yet or a position about it...
Affraid it's a hardware issue and have to send to the assistance...
Anyone know what to do?
Yup having the same issues - but i noticed only having charging issues when battery reaches 20% or the low battery notification pops up
it detects that a usb is connected but it wont charge
Solutions:
- dont let it go below 20 which is ****
- some people claim that if you use a 5pin charger instead of the 4pin which samsung includes solves the prob
Mine is a little more serious I think... haven't found a solution like that yet.
I have to connect/disconnect multiple times and it suddenly works.
But between those connects/disconnects it presents multiple problems, it appears on notification bar "Dock Connected", sometimes appears "Dock Connected" and on the notification bar appears "Suggested Apps (Anchoring)", other times it appears "Dock Connected" and the volume bar appears on the screen and stay there freeze (the phone works, but the bar doesn't disappear)... Sometimes the phone starts charging and suddenly stops, other times it says it's charging and if I remove the charger it keeps the charging symbol on the battery icon...
It's completely crazy, gonna take to service I guess.
Have you tried blowing out the usb connector on the phone with a can of compressed air?
If there is a minute piece of dust there it may be shorting something out - error that dock is connected. I know this happens to other phones, there was a big thread about it on the S3 forum. Might be a simple little thing like that...
Unfortunately that doesn't work for me, will send to service, let's see.
have you solved this problem and how?????
rokashi said:
I should clarify the title by saying that trying to charge this phone is resulting in a number of odd results.
So firstly, I've tried using the wall-mounted AC charger. I then tried using USB on my computer, in 3 different usb ports. The phone was charging perfectly less than 24 hours before this problem began.
I plugged it in as per usual, and it didn't show the little lightning bolt on the batter icon like it should. It wasn't registering that it was plugged in. I tried plugging it into my PC, and it wasn't showing that it was connected via USB. In addition to that, my computer was failing to install the drivers for it. I went back to the AC charger, and tried a few different outlets, including one on a power strip. Nothing worked.
I searched online, and found that other people had this problem, and could only fix it by resetting to factory default settings. One person even had to do it twice to get it to work. So I did this, and it still didn't work. I tried charging my old phone with this Ac charger and cable, and it wouldn't work either. So I thought it must be a fault in the cable. So I dug up the cable (also micro-usb) for my old phone, and tried it. It worked just fine for my old phone, but my S4 still had the same problem, but with something new. It would say "Dock connected" but still not charge.
As of right now, it seems to be charging properly with my new AC mount and old usb cable, but I'm worried that this could happen again. Considering this seems to be a problem for other people too, what should I do about it? Is there some way to prevent this sort of thing from happening? Was it purely the other cable, given the fact that it didn't work with my old phone either? I'm on an extremely tight budget, and this phone is my only way of being contacted for job interviews, so having it in working order is very important. Any advice would be very appreciated!
Click to expand...
Click to collapse
have u sved this problem ??
ihave same problem plz rply.
jkgohil29 said:
have u sved this problem ??
ihave same problem plz rply.
Click to expand...
Click to collapse
Yep, chalk up one more with the same problem!
At first I thought it had something to do with Aviate, a custom launcher from Yahoo (actually a pretty sweet one at that!)
But I guess not.
My work-around is to reboot the phone while connected. It charges fine while turned off and seems to keep charging when booting while plugged in.
Still... this is a stupid work-around and I want this fixed properly.
Any news from any of you guys?
ZonderZout said:
Yep, chalk up one more with the same problem!
At first I thought it had something to do with Aviate, a custom launcher from Yahoo (actually a pretty sweet one at that!)
But I guess not.
My work-around is to reboot the phone while connected. It charges fine while turned off and seems to keep charging when booting while plugged in.
Still... this is a stupid work-around and I want this fixed properly.
Any news from any of you guys?
Click to expand...
Click to collapse
Had this problem today. Suddenly out of nowhere "Dock is connected" message appeared after plugging the charger in and out. Tried to clean out the dock with stick and cotton on the edge. Then turned off and plugged in charger. Problem exists. Phone charges but stops regularly. It is very annoying when you dont know how to fix this kind of problem.
Any new solutions?
Right after this post, I froze the app "battery doctor 4.9.2" using Titanium Backup Pro (you can just uninstall it i guess). Then just plugged charger and now it's already Almost 90% without any interruption.
Sent from my GT-I9500 using XDA Free mobile app
Kamo777 said:
Right after this post, I froze the app "battery doctor 4.9.2" using Titanium Backup Pro (you can just uninstall it i guess). Then just plugged charger and now it's already Almost 90% without any interruption.
Sent from my GT-I9500 using XDA Free mobile app
Click to expand...
Click to collapse
Amazing! I've dealing with this problem for weeks and internet didn't give me any good answer, but the whole problem was a baterry monitor apk that for some reason was interfiering with the charger. Thank you so much!
I had this problem too and in my case it was a hardware problem. When i start the charging it kept repeating the start proces of charging with the vibration and the grey battery icon(in case the phone was turned off). The battery icon with the green charging light just didn't showed up. I tried many things but nothing helped. I let the phone keep charging for the whole night but in the morning i saw that it didn't charged anyway!
Then i went to a local phone reparation shop(none official samsung) and they knew immediately recognized the problem and it was the usb/charging connector where you plug it in the phone. They fixed it in 1 hour for a cheap price and from then(i think a few months ago) it charges back perfectly. It seems it's a disease with S4's.
In my previous post I was happy thinking that all this charging problems were solved after uninstalling battery apk. But, in fact, my S4 charges very slowly after that incident. I have tried two other samsung adapters (galaxy s4 mini; grand prime). First one results the same (up to 5 hours charging), the latter was comparably shorter (up to 3 hours), but still slower than it used to be (2 hours normally). So I highly suspected the hardware might be the reason. Thank you for your information, now I will also have the phone checked at some local repair shop. And give feedback of course.
Sent from my GT-I9500 using XDA Free mobile app
Kamo777 said:
In my previous post I was happy thinking that all this charging problems were solved after uninstalling battery apk. But, in fact, my S4 charges very slowly after that incident. I have tried two other samsung adapters (galaxy s4 mini; grand prime). First one results the same (up to 5 hours charging), the latter was comparably shorter (up to 3 hours), but still slower than it used to be (2 hours normally). So I highly suspected the hardware might be the reason. Thank you for your information, now I will also have the phone checked at some local repair shop. And give feedback of course.
Sent from my GT-I9500 using XDA Free mobile app
Click to expand...
Click to collapse
You probably got some water damage in your port. What you need to do is clean it. I used pure alcohol and a toothbrush for that. After that I flashed a custom kernel so I could enable fast charge true usb.
That's the reason your phone is charging slowly, it thinks it's connected true usb. So you need to boost the usb charging. After a few charge cycles I could revert back to my standard kernel and the problem was fixed.
I think ur right Lenny.
Mine S4 got wet last weekend and now i am also getting the " Dock is connected" message when i plug in the charger cable.
I can charge my phone but sometimes while charging i hear the sound go off and on what you hear when unplugging the charger.
I will try your solution and hope it will fix mine too. Thanks for posting ur tip!
I suggest you go buy a new genuine cable for an s4, the s4 does actually require a special cable capable of 2A charge rate otherwise you can end up in all sorts of bother.
Thank you all for sharing tips. I cleaned the port as suggested, then replaced my cable. Now everything is back to normal.
Sent from my GT-I9500 using XDA Free mobile app
Lucky you :good:
Same problem - galaxy s6
Hi there - same problem, on my 128gb s6. started this morning. Yesterday everything fine, would charge when connected via USB to both laptop and to regular samsung usb power unit. Have now tried 3 different USB cables including the samsung cable, 3 different usb power units and of course tried all 3 cables in laptop usb port. Have checked phone's usb port - clean as a whistle. Have rebooted both connected and unconnected. Started getting 'dock connected' message, now it just wont charge, although starts up fine. I take very good care of the phone, so no water damage or untoward shock damage (never get it wet, never drop it). Remaining battery charge seems to fluctuate between 30% and 40+ %, depending upon whether it's plugged in or not. If I turn it off, then connect usb cable, the phone just reboots, still not charging. I then turn it off and see no green battery charging screen, as I used to seen when connected but turned off. Should I just hard reset and take to repair shop? Still under warranty.
I would return the phone for a warranty repair. Software would not usually prevent the phone from charging when powered off.
As a final test, see if the s6 will charge wirelessly, assuming you have access to a qi charging pad and the s6 has a built-in qi receiver like the North American version of the s6.
I have recently purchased a Nexus 7 in order to do an in-car install.
When I am using the device and plug the charger in, everything is fine. However when I leave it for a while and the screen goes off, then I plug the charger in, nothing happens. I can then unlock the device, use it while it is plugged in and it is not charging.
I've tried doing it while it is plugged into my computer, it recognises it as a device and I can access it on my computer, yet it still doesn't charge. Again, when the screen is active and I plug the charger in, it works fine.
Any ideas as to why this is occurring?
Thanks
Hello boys! I have a very serious problem with my LE PRO 3. Since yesterday, the following is happening BUG: When I connect the charger, it does not load immediately. It only loads if I reboot the device. And if I take it out and put it back, it stops loading again. This also happens when I connect to the PC. The device only recognizes if I leave the cable connected and restart. With the headset the same thing. It only recognizes if I leave it connected and restart the device. I'm on the Cydrass Google edition ROM, and my device is the x720 version. I have already switched to other ROMs (LineageOs, Ressuection Remix, and even the Chinese STOCK ROM 26s, and the problem still persists!) Apparently it's a serious problem recognizing my USB port I do not know what else to do! Please, help me!
even first buy , do you have problem ?
To Vitor_147
Remember, if you change the stock original LeEco rom you cannot say "have a problem with my LePro3", it's no longer the original combo "LePro3" (hardware + software) so expect (and accept) anything (better or worse!) and report the defects to the rom developer.
Now some helping things!
Apart to clean the phone usb c port and to try a new usb cable, you can:
With the usb cable connected, switch the usb debug off (or on) (developer options) then check if your computer detect your phone.
Even if your computer doesn't detect the phone or your phone seems not charging battery, if the usb cable (and charger) is good in 99% of the cases it charges the battery even if not at full charge rate (expect a minimum 4 hours charge time).
Before to give up, the last try is to bring your phone back to factory conditions with everything (but everything!) under the exact conditions of how it came out of the factory, then you can start over there and have an idea of whether the phone has a hardware defect or if it's just a matter of software.
I hope you solve the problem, if you find the right solution please report it here, so other users can learn how to solve this problem! Cheers!
orsonbear said:
To Vitor_147
Remember, if you change the stock original LeEco rom you cannot say "have a problem with my LePro3", it's no longer the original combo "LePro3" (hardware + software) so expect (and accept) anything (better or worse!) and report the defects to the rom developer.
Now some helping things!
Apart to clean the phone usb c port and to try a new usb cable, you can:
With the usb cable connected, switch the usb debug off (or on) (developer options) then check if your computer detect your phone.
Even if your computer doesn't detect the phone or your phone seems not charging battery, if the usb cable (and charger) is good in 99% of the cases it charges the battery even if not at full charge rate (expect a minimum 4 hours charge time).
Before to give up, the last try is to bring your phone back to factory conditions with everything (but everything!) under the exact conditions of how it came out of the factory, then you can start over there and have an idea of whether the phone has a hardware defect or if it's just a matter of software.
I hope you solve the problem, if you find the right solution please report it here, so other users can learn how to solve this problem! Cheers!
Click to expand...
Click to collapse
I already wrote this up in Omni thread, so I'll keep it short. I've also been experiencing this same issue for a while now, it first happened on stock rom, reboot solves it. Darko tried a fix in his eas kernel, seems to fix it (so maybe somehow kernel related). I believe it might be somehow related to the usb-c controller, cause I found cases online of similar issues with pixel phones (i believe the controller manufacturer is the same as in our phones). I actually know the exact moment when my problems first began, after I used my OTG adapter to connect a usb mouse. Few hours after that, the phone wouldnt charge.
{Disclaimer - this part is purely my theory}
I think it maybe somehow related to a safety "switch/fuse" of sorts, or something to do with static discharge or something similar, and here's why. I did a loot of trial and error since the first time it happened to me cause it scared the sh*t outta me, thinkin my phone is broken. I am vigilant about careful handling of usb ports and such, (ocd-ish really) so theres no way I physically damaged it, its not loose one bit, cleaned it out, tried wiggling the cable around anyway, has no effect, so I excluded the possibility of a faulty port/soldering. A few occurences to note
No1 - if I plug my phone in the charger first, and then plug the charger in the outlet, it breaks the port, I have to reboot to fix it. But plug the charger in the outlet first, then the cable to the phone - no problem. (Static discharge of sorts?)
No2 - since it started happening, the only way my usb-c OTG adapter works is if i first plug the adapter in the phone, and then the desired usb device in the adapter. If i try to plug the adapter in the phone w/say a usb stick already connected to it - no go, doesnt work.
Oh... I'm sorry for what happens to your phone! It's true the safest way to charge a phone avoiding current surge/spikes/shocks is to plug first the charger to AC outlet, then the usb c plug to the phone, then the usb plug to the charger. If possible, never plug/unplug the charger to/from the AC outlet if the phone is connected to the charger.
When the phone is full charged, first unplug the cable, not important which side first, then unplug the charger. If the phone is still charging, better unplug first the cable from the charger side to avoid micro spikes on the usb c port.
If you cannot obtain a normal behavior of the usb c port neither with reflashing the phone with the "qfil" system, perhaps a logic port of the usb c port is burned or simply in undetermined state, in the last case a total battery discharge may reset the logic port state and the phone can works fine once fully recharged. I'm sorry I can't help you better at this time! Cheers!
Sent from my LEX720 using XDA Labs
@orsonbear, thats my train of thought aswell, micro discharges occuring while plugging/unplugging causing the controller to freak out, or potentially damage the tiny connections (micro usb only had 4 wires vs 24! in usb-c). But I believe the problem lies somewhere on the software/firmware side, mainly because a reboot solves any issue I have. And also I just remembered, the first time it happened to me was a couple of days after I updated my firmware while updating to 19s, or 20s, cant recall precisely. Anywho, for me it's a minor nuissance, not like the OP who can only connect his phone once before rebooting (I can go for weeks before it occurs).
orsonbear said:
Oh... I'm sorry for what happens to your phone! It's true the safest way to charge a phone avoiding current surge/spikes/shocks is to plug first the charger to AC outlet, then the usb c plug to the phone, then the usb plug to the charger. If possible, never plug/unplug the charger to/from the AC outlet if the phone is connected to the charger.
When the phone is full charged, first unplug the cable, not important which side first, then unplug the charger. If the phone is still charging, better unplug first the cable from the charger side to avoid micro spikes on the usb c port.
If you cannot obtain a normal behavior of the usb c port neither with reflashing the phone with the "qfil" system, perhaps a logic port of the usb c port is burned or simply in indeterminated state, in the last case a total battery discharge may reset the logic port state and the phone can works fine once fully recharged. I'm sorry I can't help you better at this time! Cheers!
Sent from my LEX720 using XDA Labs
Click to expand...
Click to collapse
Yes,
I thought about letting the phone down completely, and see if that does not happen anymore!
Same problem here
Days ago it start happen, exactly how you say, i never change the stock software and it start happen randomly, I have to reboot to recognize anything that I plug into the USB c port, I try factory reset and change from 26s to 23s and it keeps happening so maybe I'm pretty ****ed, someone help me, in my country no one will fix the port u.u (sorry for my English).
Hellao! I'm having a very similar issue, charging works fine and the pc detects the phone but OTG and the audio on my headset is not working. Did someone of you find a solution to this problem?
1. x720, x722 or x727?
2. Where did you buy the phones? (Store names)
3. What kind of USB-C cable were you using? The one that came in the box? Have you used other USB-C cables and adapters to see if it works?
This could be hardware failure due to a lack of QCing from LeEco (just your average hardware issue) or a USB-C cable issue. It's ver. 1.0 on all LeEco Pro 3 models (right)? So I can't say it's the cable for sure. Has anyone attempted to take the phone apart to replace the port? do they even sell the port replacement?
Similar problem for me. About a month ago my headset stop working and the phone did not recognize it at all, tried with the adaptor to 3,5 mm jack and did not work either. Charging worked though.
Found a replacement chip with usb c port and ordered. Yesterday i replaced the charging port, but still the headset do not work at all, and connection to PC does not work ether. Charging still works as usual.
I ordered the phone from grossoshop 7 month ago with their rom. Tried this evening to upgrade the rom from 5.8.018 to 5.9.020, still grossoshop but no difference... It should not be a hardware problem as i replaced the type c port.
Should i try to flash another rom to see if there's any difference?
Any other suggestions?
Thankful for any ideas
Linkan78 said:
Similar problem for me. About a month ago my headset stop working and the phone did not recognize it at all, tried with the adaptor to 3,5 mm jack and did not work either. Charging worked though.
Found a replacement chip with usb c port and ordered. Yesterday i replaced the charging port, but still the headset do not work at all, and connection to PC does not work ether. Charging still works as usual.
I ordered the phone from grossoshop 7 month ago with their rom. Tried this evening to upgrade the rom from 5.8.018 to 5.9.020, still grossoshop but no difference... It should not be a hardware problem as i replaced the type c port.
Should i try to flash another rom to see if there's any difference?
Any other suggestions?
Thankful for any ideas
Click to expand...
Click to collapse
Have you tried switching cables? Could you have broken a contact or something while swapping the port out? Have you tried putting the old port back in to see if the computer recognizes the phone with it? Unfortunately you're gonna have to try everything, even if opening it back up again is tough. LeEco phones aren't exactly known for their build quality. Are you x720? Well, flash whatever ROMs you can, I guess. Might as well try everything.
sk8223 said:
Have you tried switching cables? Could you have broken a contact or something while swapping the port out? Have you tried putting the old port back in to see if the computer recognizes the phone with it? Unfortunately you're gonna have to try everything, even if opening it back up again is tough. LeEco phones aren't exactly known for their build quality. Are you x720? Well, flash whatever ROMs you can, I guess. Might as well try everything.
Click to expand...
Click to collapse
Yes, I have tried to switch the cables so no problem with them. Have not done a swap back again as the problem seem to be similar as before, so maybe a change to a different rom will be the next step for me. If change of rom does not work, maybe then I'll try to swap port again.
And yes, It's a X720
Thanks for fast reply.
Linkan78 said:
Yes, I have tried to switch the cables so no problem with them. Have not done a swap back again as the problem seem to be similar as before, so maybe a change to a different rom will be the next step for me. If change of rom does not work, maybe then I'll try to swap port again.
And yes, It's a X720
Thanks for fast reply.
Click to expand...
Click to collapse
Maybe it's not plugged in or attached correctly so the phone doesn't detect it. Sounds like a hardware issue to me, in all honesty. I once took apart my iPhone 5 to replace the non-functional home button and it wouldn't work no matter what I tried. I had to remove the battery, reseat it, and then attach the home button again. It finally worked after a reboot.
just report in on this thread, I as well recently purchased an x727 experienced the similar issue. Basically as described above no matter what roms i test is always have some sort of camera errors when charging.
sometimes charging doesn't work or camera doesn't work I have to reboot to get it to work. extremely annoying. I think it is hardware related.
Anybody else have a solution?
blanktape said:
just report in on this thread, I as well recently purchased an x727 experienced the similar issue. Basically as described above no matter what roms i test is always have some sort of camera errors when charging.
sometimes charging doesn't work or camera doesn't work I have to reboot to get it to work. extremely annoying. I think it is hardware related.
Anybody else have a solution?
Click to expand...
Click to collapse
i got charging problem dude after second day of use just got it last night x727.ffs.
i replace the usb board and the problem persist, i don't know what to do anymore, if someone has passed this problem please speak I am about to smash this damn bugged phone
Anthp said:
i replace the usb board and the problem persist, i don't know what to do anymore, if someone has passed this problem please speak I am about to smash this damn bugged phone
Click to expand...
Click to collapse
This my advice to anybody considering buying this phone don't why you will get zero support from letv.
I got luckey I have zero problems with phone .
I recommend spending more money and getting a supported phone by the maker.
If you do buy one buy it from Amazon where get a warranty on it.
Sent from my LEX727 using xda premium
Somebody fixed thuis allready as my le2 x626 only detects charging by USB when in fact its connected to the AC adapter.
And extremly slow charging from 9 to 100 % more then รณ hours.
Also the phone`s microphone is nog working at all!! And the headphone is nog working!
please help
Hello. I'm wrecking my brain trying to understand this. Yesterday my phone started exhibiting weird charging behavior. It charges fine when plugged into PC, but does not always charge when plugged into wall unit or car charger. I tried multiple cables/charger combinations which all work as expected with my other phones/tablets. It is only with S7 Edge that I started having an issue. Wireless charging works fine as well. I tested multiple charges/cables while the phone is turned off and the result is the same--works well when plugged into PC, and not well when plugged into wall/car charger. When I use wall charger, it may take me multiple attempts to initiate "charge" status. Is my port messed up? Do I have an issue with (some) charging pins? Has anyone experienced similar issues?
Thanks!