Database Users

[Q] CWM Won't work properly

Hey everyone,
I am using the DROID RAZR M Utility 1.20, as posted here:
http://forum.xda-developers.com/showthread.php?t=2249773
I also followed the youtube video of it, as posted here:
http://youtu.be/ej7HBxvNPv0 (The video is actually for the Razr HD but the process is basically the same.)
Here is what I did.
Powered up phone in AP Fast Boot, and did step 1.) Flash 4.1.2 Stock System.
Then rebooted phone into Normal Mode (USB Debugger is on) and ran option 5.) Motochopper Root Exploit.
It rooted successfully.
Ten i ran Step 6.) Unlock Bootloader (Motopocalypse), ran the App, and it says it was successful.
Then I Ran step 4. ) Flash CWM Custom Recovery.
after this i rebooted the phone and went into the Recovery mode, but the only thing im getting is the little android on his back with the alert sign:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I am not sure what to do next? I am trying to load the Cyanogenmod onto this Droid Razr M, but safestrap evidently is not going to do it for me.
Any help is appreciated.
Thanks!

quick update..
Appears that Step6 is not working.
After rebooting into AP Fastboot, it says the Device is Locked.
Anyother tools out there to unlock the bootloader?

RomeoNate said:
Appears that Step6 is not working.
After rebooting into AP Fastboot, it says the Device is Locked.
Anyother tools out there to unlock the bootloader?
Click to expand...
Click to collapse
Motopocalypse is the only tool to unlock the BL. You can find it stand-alone if you do a quick Google search. However, if you were on the latest update, you won't be able to unlock your BL, even if you revert back to the older version. You can root with Motochopper 1.3, though.
Also, that screen is the stock recovery screen. When you're in that screen, hold vol down and tap vol up to get into recovery. If in fact you can unlock your bootloader and you succeed and you flash CWM recovery, you'll need to reboot immediately into recovery so the CWM updater script can finish its install. Otherwise, the stock recovery will override.

So if the phone has ever been updated OTA to the latest version, unlocking the bootloader is a lost cause?
That really sticks because i think this phone was updated.
I have verified the phone is rooted - otherwise safestrap wouldn't work.
So phone is rooted - what your saying is, using that tool - run the CWM Script, then reboot the phone and go directly to the recovery screen, then hold the Volume Down button, then press the Volume Up button..?
I will give this a try.
Thanks!

RomeoNate said:
So if the phone has ever been updated OTA to the latest version, unlocking the bootloader is a lost cause?
That really sticks because i think this phone was updated.
I have verified the phone is rooted - otherwise safestrap wouldn't work.
So phone is rooted - what your saying is, using that tool - run the CWM Script, then reboot the phone and go directly to the recovery screen, then hold the Volume Down button, then press the Volume Up button..?
I will give this a try.
Thanks!
Click to expand...
Click to collapse
Yeah, unfortunately, if it was ever updated, you can't unlock the BL. Even reverting back still won't open the "trusted zone." You can verify if Motopocalypse worked by booting back into the Fastboot screen. It should say the phone's unlocked. If you can get it unlocked, then yeah, immediately power off phone after flashing recovery and then reboot straight into recovery. If script ran as it should, you should boot straight into CWM.

RikRong said:
Yeah, unfortunately, if it was ever updated, you can't unlock the BL. Even reverting back still won't open the "trusted zone." You can verify if Motopocalypse worked by booting back into the Fastboot screen. It should say the phone's unlocked. If you can get it unlocked, then yeah, immediately power off phone after flashing recovery and then reboot straight into recovery. If script ran as it should, you should boot straight into CWM.
Click to expand...
Click to collapse
Well i think im at a dead-end. :-/
Fastboot keeps saying Device is LOCKED. I cannot get it to unlock... Argh!
Any other way ? Is it possible to revert or modify the "trusted zone"?

RomeoNate said:
Well i think im at a dead-end. :-/
Fastboot keeps saying Device is LOCKED. I cannot get it to unlock... Argh!
Any other way ? Is it possible to revert or modify the "trusted zone"?
Click to expand...
Click to collapse
Nope, no way to unlock and the man Dan said there's probably no chance to unlock.

unable to enter Recovery - I get "No Command"

Hello guys,
Nexus 4
I flashed Stock 4.4.2.
I unlocked the Bootloader.
when I try to enter Recovery Mode - I get No Command like it shows here in the Pic:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Any ideas?
I want to see the stock recovery... (First time).
Later I will try to install the Custom recovery, but for now I wanaa figure out what the problem with the device?
Thanks

When you flashed did you flash the stock recovery also.
I presume you did this via adb and not ota.
Phone : Nexus 4 /Rom : cataclysm / Kernel : Stock.

bladebuddy said:
When you flashed did you flash the stock recovery also.
I presume you did this via adb and not ota.
Phone : Nexus 4 /Rom : cataclysm / Kernel : Stock.
Click to expand...
Click to collapse
I did via CMD-> Fastboot commands.
And sure, I flashed all neccesary IMG files (Bootloader, radio, Recovery, userdata, system etc)
All files from the stock file - image-occam-kot49h.zip (Attached Screenshot)

Have you tried hold power and press vol up on that screen?

arffrhn said:
Have you tried hold power and press vol up on that screen?
Click to expand...
Click to collapse
YES.
Nothing really happens. The phone just powered off.

I do exactly what you see here in this short video:

shakta said:
YES.
Nothing really happens. The phone just powered off.
Click to expand...
Click to collapse
Hmm can you enter fastboot? Try flashing the images again. Or better you download the whole package again before flashing. Maybe some got corrupted during download.
---------- Post added at 09:43 AM ---------- Previous post was at 09:39 AM ----------
shakta said:
I do exactly what you see here in this short video:
Well in this video, he got custom recovery installed. So when he pressed that recovery on bootloader menu, it goes straight into recovery. But for stock recovery, it will show that android with red mark exclamation thing. You need to press and hold power and press vol up one time. Then it will go into recovery menu.
Click to expand...
Click to collapse

arffrhn said:
Hmm can you enter fastboot? Try flashing the images again. Or better you download the whole package again before flashing. Maybe some got corrupted during download.
---------- Post added at 09:43 AM ---------- Previous post was at 09:39 AM ----------
shakta said:
I do exactly what you see here in this short video:
Well in this video, he got custom recovery installed. So when he pressed that recovery on bootloader menu, it goes straight into recovery. But for stock recovery, it will show that android with red mark exclamation thing. You need to press and hold power and press vol up one time. Then it will go into recovery menu.
Click to expand...
Click to collapse
Sure when I run "fastboot devices", I see the device.
And this is how I flashed the image - "fastboot flash XXXX"
I will download the image again and will try to flsh the Recovery again, if wont work, I will flash all files.
BTW - this is the image I am trying to flash - https://developers.google.com/android/nexus/images?hl=iw#occam (Just to make sure)
Thanks!
Click to expand...
Click to collapse

shakta said:
Sure when I run "fastboot devices", I see the device.
And this is how I flashed the image - "fastboot flash XXXX"
I will download the image again and will try to flsh the Recovery again, if wont work, I will flash all files.
BTW - this is the image I am trying to flash - https://developers.google.com/android/nexus/images?hl=iw#occam (Just to make sure)
Thanks!
Click to expand...
Click to collapse
Yeah, that's the right one. Good luck.

It's normal. From the "no command" screen hold power button and tap vol-up.

DrFredPhD said:
It's normal. From the "no command" screen hold power button and tap vol-up.
Click to expand...
Click to collapse
When I try to do it the phone powerd off. Nothing happens then just Black screen - Device is off.

You don't have to keep hold of anything really. Just hold power then immediately tap vol-up. If it's still not working try reflashing. You can flash just a recovery with command "fastboot flash recovery recovery.img"

DrFredPhD said:
You don't have to keep hold of anything really. Just hold power then immediately tap vol-up. If it's still not working try reflashing. You can flash just a recovery with command "fastboot flash recovery recovery.img"
Click to expand...
Click to collapse
It worked!
Thanks a lot to everyone!

shakta said:
It worked!
Thanks a lot to everyone!
Click to expand...
Click to collapse
Great to hear that mate.
Sent from my Nexus 4 using xda premium

Device is not detected when trying to flash TWRP

okay hello people.
here is my situation.
i was about to revert back to kitkat from ED300 CM12.1, and i suddenly wipe off and formatted my internal storage.
and now ofcourse i cant boot in and what i did was trying to reinstall TWRP through fastboot and minimal adb from PC.
*i tried to flash Lenovo_A6000_TWRP-3.0.2-0_x64-L_by_SevenMaxs
*i cant go into download mode (vol+,vol-,power) button.
so i went to fastboot mode (vol-,power) button until the 'powerkey long press can reboot phone' appear , and i plug in my phone to pc and when i type in command for -adb devices, no device appear.
figure out it was okay, i go ahead and proceed with - fastboot boot recovery.img command.
then it shows
FAILED (remote: dtb not found)
and im stuck there. idk what else to do, which guide to follow to bring my phone back to life.
i have did hours of searching but nothing works. really need a magic here.
thanks guys for ur time

rizarulaltiz said:
okay hello people.
here is my situation.
i was about to revert back to kitkat from ED300 CM12.1, and i suddenly wipe off and formatted my internal storage.
and now ofcourse i cant boot in and what i did was trying to reinstall TWRP through fastboot and minimal adb from PC.
*i tried to flash Lenovo_A6000_TWRP-3.0.2-0_x64-L_by_SevenMaxs
*i cant go into download mode (vol+,vol-,power) button.
so i went to fastboot mode (vol-,power) button until the 'powerkey long press can reboot phone' appear , and i plug in my phone to pc and when i type in command for -adb devices, no device appear.
figure out it was okay, i go ahead and proceed with - fastboot boot recovery.img command.
then it shows
FAILED (remote: dtb not found)
and im stuck there. idk what else to do, which guide to follow to bring my phone back to life.
i have did hours of searching but nothing works. really need a magic here.
thanks guys for ur time
Click to expand...
Click to collapse
BTW if "fastboot devices" not showing any devices then try to properly install fastboot on computer."fastboot boot twrp.img" is command for boot the twrp without flashing.
try "fastboot flash recovery twrp.img" .
p.s:-Try to flash different recovery file.It may be corrupted.

i-AM-BoReD said:
BTW if "fastboot devices" not showing any devices then try to properly install fastboot on computer."fastboot boot twrp.img" is command for boot the twrp without flashing.
try "fastboot flash recovery twrp.img" .
p.s:-Try to flash different recovery file.It may be corrupted.
Click to expand...
Click to collapse
did it as your advice,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
then i reboot the phone, still cant manage to go into recovey. it stuck there at lenovo logo.
tried with different recovery image, still the same

rizarulaltiz said:
did it as your advice,
then i reboot the phone, still cant manage to go into recovey. it stuck there at lenovo logo.
tried with different recovery image, still the same
Click to expand...
Click to collapse
As i can see that it is saying device not found but flshing is succeeded.
Editlz try to install fastboot properly.Look here

i-AM-BoReD said:
As i can see that flashing is successful.For entering to recovery r u using button combo or command?
Click to expand...
Click to collapse
i use button combo.
vol+, vol-, power button

rizarulaltiz said:
i use button combo.
vol+, vol-, power button
Click to expand...
Click to collapse
Here is the possibilities:-
1)May be fastboot is not properly installed .I gave a link in the previous post for that. "device not found" that shouldn't be appear.
2)Try vol+ +power button
3)Try if stock recovery can be flashed by fastboot.Link.if can be then let me know.
4)If not then run this command in adb
Code:
adb shell
ls -al /dev/block/platform/dw_mmc/by-name
and give a screen shot.

Did you flash kitkat ROM after this or before this fuss?
If Yes, then you need to flash TWRP for kitkat firmware.

https://drive.google.com/file/d/0B8_p5nNeW71VRFZnc3cwb2hLR28/view?usp=sharing
download the above recovery and download flashify from playstore . Flash the recovery that you downloaded from above link with flashify and reboot and in the next step you will be in the recovery

Try this
http://forum.xda-developers.com/len...lenovo-a6000-plus-stuck-booting-logo-t3437378
LP/MM TWRP 2.8.7.7 https://drive.google.com/file/d/0B3yAzE4FH2e7RkNQbUk2b0g1T0E/view?usp=drivesdk
KK TWRP 2.8.6.1 https://drive.google.com/file/d/0B3yAzE4FH2e7RU5helVWd0dBUGM/view?usp=drivesdk

i-AM-BoReD said:
Here is the possibilities:-
1)May be fastboot is not properly installed .I gave a link in the previous post for that. "device not found" that shouldn't be appear.
2)Try vol+ +power button
3)Try if stock recovery can be flashed by fastboot.Link.if can be then let me know.
4)If not then run this command in adb
Code:
adb shell
ls -al /dev/block/platform/dw_mmc/by-name
and give a screen shot.
Click to expand...
Click to collapse
1.fastboot is properly installed
2.still nothing
3. tried this and it worked. i can boot into recovery now.
now i should flash the stock rom right?

rizarulaltiz said:
1.fastboot is properly installed
2.still nothing
3. tried this and it worked. i can boot into recovery now.
now i should flash the stock rom right?
Click to expand...
Click to collapse
Then ur device is good to go.I found a recovery flashble stock rom in help or guide thread few days ago.Search it.
Also if there is recovey flashable T.W.R.P available somewhere u can flash it also.
Edit:-Here is a zip file of T.W.R.P.But version is 3.0.0.1.Don know if it can be flaahed by Stock recovery or not.Give it a try.If succeeded then no need to flash whole stock rom.You know that already.

i-AM-BoReD said:
Then ur device is good to go.I found a recovery flashble stock rom in help or guide thread few days ago.Search it.
Also if there is recovey flashable T.W.R.P available somewhere u can flash it also.
Edit:-Here is a zip file of T.W.R.P.But version is 3.0.0.1.Don know if it can be flaahed by Stock recovery or not.Give it a try.If succeeded then no need to flash whole stock rom.You know that already.
Click to expand...
Click to collapse
after i manage to flash stock recovery, i flash TWRP-2.8.6.1_A6000. then i boot into TWRP and format my internal storage, then continue flashing back ED 300's CM12.1.
and my device is back onlinee! Thanks brother for the help!!!

rizarulaltiz said:
1.fastboot is properly installed
2.still nothing
3. tried this and it worked. i can boot into recovery now.
now i should flash the stock rom right?
Click to expand...
Click to collapse
I am facing the same problem of adb device not listed , please share how it worked for you

I have problem with recovery. Help please !

Hi. First i want to say is sorry for my bad english.
I unlocked the bootloader of my g6 and i have flashed Twrp recovery, but when i try to go to recovery mode i have this messege : " your device cannot be checked for corruption . please lock the bootloader ".
Can anyone tell me how to resolve this because i want to flash custom roms but i cant because i cant go to recovery mode..
Help me please.
Sorry if there was a topic like this, but i can not find a solution to this problem.
Now i see when i go to ADB folder and write the command " adb reboot recovery " after the reboot it says " No Command " and i cant do nothing .. I cant flash.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If you mean this screen ^ that is a normal screen that appears, with every power up / restart, after the bootloader has been unlocked.
I think of it as a "red badge of courage".
As to the question about adb commands, what is it that you are trying to accomplish?

Some more information is needed to help you.
What is your model (h870, us997)?
Are you sure you properly installed twrp (reboot to bootloader, fastboot flash recovery twrp.img)?
Which version of twrp did you use (official, Melina, eliminater's (recommended))?
Regarding your adb problem - do you fail to reboot to recovery using adb from within? Have you tried to turn it off and on again?? I mean, turn it off and try the button combination to enter recovery (turn on holding vol- and power, when logo appears, release power and quickly press again and keep holding both until "factory reset", confirm twice).
Information is key!
PS as the previous poster wrote - if you unlock your bootloader you get the warning screen, just ignore it.

niksjdm said:
Hi. First i want to say is sorry for my bad english.
I unlocked the bootloader of my g6 and i have flashed Twrp recovery, but when i try to go to recovery mode i have this messege : " your device cannot be checked for corruption . please lock the bootloader ".
Can anyone tell me how to resolve this because i want to flash custom roms but i cant because i cant go to recovery mode..
Help me please.
Sorry if there was a topic like this, but i can not find a solution to this problem.
Now i see when i go to ADB folder and write the command " adb reboot recovery " after the reboot it says " No Command " and i cant do nothing .. I cant flash.
Click to expand...
Click to collapse
the "your device cannot be checked for corruption" screen is normal, it happens when you unlock the bootloader, no issue there, in order to install TWRP you must:
1. plug your phone in and type 'adb reboot-bootloader' to boot into fastboot mode
2. flash the twrp image via 'fastboot flash recovery TWRPIMAGENAME.img'
3. This is important!: type 'fastboot reboot' and hold the rear button and volume down during the shutdown!, when the LG logo shows up quickly release JUST the rear button and press/hold it again, you should see a factory reset prompt screen, press yes both times, and you should be dumped into TWRP, at this point you can reboot from within TWRP and you should be fine.
Explanation:
the stock LG rom with overwrite the recovery if it determines it has been changed, by booting to TWRP before booting the ROM, TWRP will modify the ROM to stop it from overwriting the recovery allowing TWRP to stay after booting.
I hope this helps

Mnky313 said:
the "your device cannot be checked for corruption" screen is normal, it happens when you unlock the bootloader, no issue there, in order to install TWRP you must:
1. plug your phone in and type 'adb reboot-bootloader' to boot into fastboot mode
2. flash the twrp image via 'fastboot flash recovery TWRPIMAGENAME.img'
3. This is important!: type 'fastboot reboot' and hold the rear button and volume down during the shutdown!, when the LG logo shows up quickly release JUST the rear button and press/hold it again, you should see a factory reset prompt screen, press yes both times, and you should be dumped into TWRP, at this point you can reboot from within TWRP and you should be fine.
Explanation:
the stock LG rom with overwrite the recovery if it determines it has been changed, by booting to TWRP before booting the ROM, TWRP will modify the ROM to stop it from overwriting the recovery allowing TWRP to stay after booting.
I hope this helps
Click to expand...
Click to collapse
THANK YOU SO MUCH .. It works .. The problem was in the buttons.

I have another problem.. When i try to go to recovery..the only what i see is the logo of TWRP and then the phone just reboot and i cant do nothing.. The phone is h870. What i have to do to have normal TWRP because i want to root it..

Try another twrp version. For Oreo afaik only Melina and Eliminater (which is a continuation of Melina) work. I recommend Eliminater's version, it's up to date (v3.2.3) and backup works - at least for me. I'm on H870 Oreo 20b.
For Nougat I have no experience, as I got my phone recently and never downgraded. But as I understand it from others' experiences, for full custom ROM functionality (e.g. fingerprint) Nougat bootloader is preferable. Search the forum, the information is there!

niksjdm said:
I have another problem.. When i try to go to recovery..the only what i see is the logo of TWRP and then the phone just reboot and i cant do nothing.. The phone is h870. What i have to do to have normal TWRP because i want to root it..
Click to expand...
Click to collapse
grushnickij said:
Try another twrp version. For Oreo afaik only Melina and Eliminater (which is a continuation of Melina) work. I recommend Eliminater's version, it's up to date (v3.2.3) and backup works - at least for me. I'm on H870 Oreo 20b.
For Nougat I have no experience, as I got my phone recently and never downgraded. But as I understand it from others' experiences, for full custom ROM functionality (e.g. fingerprint) Nougat bootloader is preferable. Search the forum, the information is there!
Click to expand...
Click to collapse
Yes, I use Melina TWRP, flash Version rel_o2 (or latest) using the method I said above.

Where i can find those versions of Twrp ( melina, eliminater ) ?

niksjdm said:
Where i can find those versions of Twrp ( melina, eliminater ) ?
Click to expand...
Click to collapse
https://forum.xda-developers.com/lg-g6/development/twrp-t3828254
https://forum.xda-developers.com/lg-g6/development/recovery-twrp-3-2-1-unofficial-fixes-t3722199
https://forum.xda-developers.com/lg-g6/development/recovery-twrp-lg-g6-us997-unofficial-t3629883
https://forum.xda-developers.com/lg-g6/development/recovery-twrp-3-1-x-t3627595

Axon 7 not able to install TWRP or lock bootloader

Hello all,
I need help with my Axon 7 (A2017G)
I upgraded my phone to Oreo 8.1 (AospExtended), played with it a bit, but decided to downgrade to 7.1.1 (stock) again.
After I did so, I noticed something different. Firstly when it boots up, this screen appears
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It goes away after 5 seconds and boots or if I click the vol up or down button, it takes me to this screen
If I choose anything other than Recovery, the phone just boots up
If I choose Recovery, it takes me here
I cannot boot into recovery mode at all. I can't find out how to install TWRP recovery on here at all.
Also If i boot using power+vol down, this appears
Please advise how to install TWRP and lock the bootloader

Have you tried the Axon 7 tool by Djkuz?
It should be able to get you out of this, I'll find the link for you.

Khepralife said:
Hello all,
I need help with my Axon 7 (A2017G)
I upgraded my phone to Oreo 8.1 (AospExtended), played with it a bit, but decided to downgrade to 7.1.1 (stock) again.
After I did so, I noticed something different. Firstly when it boots up, this screen appears It goes away after 5 seconds and boots or if I click the vol up or down button, it takes me to this screen
If I choose anything other than Recovery, the phone just boots up
If I choose Recovery, it takes me here
I cannot boot into recovery mode at all. I can't find out how to install TWRP recovery on here at all.
Also If i boot using power+vol down, this appears
Please advise how to install TWRP and lock the bootloader
Click to expand...
Click to collapse
that is, like, 100% normal. you have stock recovery and that FTM mode just gives you adb. If you can't enter fastboot then you would have to install it via EDL.
But before doing that, why the heck would you want to lock the bootloader? Lol you can just hide the 5 sec screen and sell it (or return to zte, they never check), there's no difference at all
If you're gonna lock anyways, you have to install TWRP via EDL (use EDL Tool by djkuz) then install the "remove inscription" by raystef66 or follow the steps on his guide. Then you will get fastboot. After you do that, just reboot the phone. TWRP should be replaced with stock recovery again. Check if it was (power + vol+) and if you enter stock recovery then go to Fastboot (via "adb reboot bootloader") and do the command to lock
Of course you have to be FULLY stock (no magisk or whatever) or you'll brick your device

Axon 7 tool
https://forum.xda-developers.com/axon-7/development/axon-7-edl-tool-flash-backup-restore-t3750759
There is an Axon 7 tool kit as well via another post here.
https://forum.xda-developers.com/axon-7/development/tool-axon7toolkit-t3573108

Syberclone said:
Have you tried the Axon 7 tool by Djkuz?
It should be able to get you out of this, I'll find the link for you.
Click to expand...
Click to collapse
Thank you

Choose an username... said:
that is, like, 100% normal. you have stock recovery and that FTM mode just gives you adb. If you can't enter fastboot then you would have to install it via EDL.
But before doing that, why the heck would you want to lock the bootloader? Lol you can just hide the 5 sec screen and sell it (or return to zte, they never check), there's no difference at all
If you're gonna lock anyways, you have to install TWRP via EDL (use EDL Tool by djkuz) then install the "remove inscription" by raystef66 or follow the steps on his guide. Then you will get fastboot. After you do that, just reboot the phone. TWRP should be replaced with stock recovery again. Check if it was (power + vol+) and if you enter stock recovery then go to Fastboot (via "adb reboot bootloader") and do the command to lock
Of course you have to be FULLY stock (no magisk or whatever) or you'll brick your device
Click to expand...
Click to collapse
Thank you