Hi there,
I really can´t understand how this happened, but the LCD touchscreen it´s not working at all. Yesterday was WORKING ONLY IN LANDSCAPE MODE, now either in Portrait ow landscape. Maybe the is a mal function of the cable? or is the LCD? Anyone has experienced something like this?
Since I´m going to Hong Kong I will buy a new device, any sugestions? Something tought and powerfull like Universal (I heard that HTC is developing a Universal 2)
Maybe TynT?
regards,
phelipe
I use my phone as a cycling computer for my bicycle but don't like how the whole screen is used for something that can be minimized to 1/8 of the screen (ie. DigiHUD). I looked around for apps that allow you to only trigger some pixels of a screen but there are only screen dimming apps. Does anyone know if this has been done or is possible?
CloudyG2 + Mini view ??
NevaX1 said:
CloudyG2 + Mini view ??
Click to expand...
Click to collapse
That would definitely do the trick minus the fact that the non-used screen is still on. Now I'm just being picky, I know (first off, thanks for pointing it out to me), but anyway of actually powering on only part of the screen itself? Is that what the QuickWindow case does?
Jay_eS_Iye said:
Does anyone know if this has been done or is possible?
Click to expand...
Click to collapse
i think that's impossible on ips panels like our device has...
Jay_eS_Iye said:
That would definitely do the trick minus the fact that the non-used screen is still on. Now I'm just being picky, I know (first off, thanks for pointing it out to me), but anyway of actually powering on only part of the screen itself? Is that what the QuickWindow case does?
Click to expand...
Click to collapse
The only display able to shutdown unused pixels is AMOLED
G2 has got IPS
Inviato dal mio LG-D802 utilizzando Tapatalk
That's right, I don't know why I was thinking AMOLED in my head; getting my phones mixed up. Thanks guys, was worth a try, will have to try out Mini View tho
Somedays ago problem was shown.at 1st the bar was short...and day by day it's bigger.
now it's occur full screen.Sometimes it's just transparent sometimes mix color.
Rom-Icex 5.9
i can't flash rom....because now my display bottom side is fully black.bt touch is working.
Is that hardware or software issue?
i see some other thread he has same issue & he change his display under warranty bt nothing help, thread was unfinished.
What should i do now?
anyone?
Bump
i think u can flash the rom because while flashing the rom there is only a confirmation slider in the bottom in twrp so u can guess its place even the display isnt working as u said that the touch is working but the display is not.
see if it helps
You see this thread?
http://forum.xda-developers.com/showthread.php?t=2769770
freinet
Gesendet von meinem D5503 mit Tapatalk
freinet said:
You see this thread?
http://forum.xda-developers.com/showthread.php?t=2769770
freinet
Gesendet von meinem D5503 mit Tapatalk
Click to expand...
Click to collapse
Thanx for query.
Bt mine problem is not just a black strips.
1.75/3 off my screen is fully black and....remain was randomly random color.
Any update?
same as mine, dats hardware. change the screen lcd, got mine repaired last week,
but, i dont know what the cause~ last thing i remember, im on google edition ROM, stock, no tweak. suddenly, the screen became like that, haha
sagor1 said:
Somedays ago problem was shown.at 1st the bar was short...and day by day it's bigger.
now it's occur full screen.Sometimes it's just transparent sometimes mix color.
Rom-Icex 5.9
i can't flash rom....because now my display bottom side is fully black.bt touch is working.
Is that hardware or software issue?
i see some other thread he has same issue & he change his display under warranty bt nothing help, thread was unfinished.
What should i do now?
Click to expand...
Click to collapse
Replace your LCD.
Profit :good:
It is definitely hardware problem.
iubjaved said:
Replace your LCD.
Profit :good:
It is definitely hardware problem.
Click to expand...
Click to collapse
I replace my phone lcd....bt now touch is not working properly!?
sagor1 said:
I replace my phone lcd....bt now touch is not working properly!
Click to expand...
Click to collapse
When replacing the LCD , havent you checked if touch is working or not?
What sort of touch issue are you having? Phantom touches ? Or some portion of the screen doesnt register touches?
iubjaved said:
When replacing the LCD , havent you checked if touch is working or not?
What sort of touch issue are you having? Phantom touches ? Or some portion of the screen doesnt register touches?
Click to expand...
Click to collapse
When the phone was open touche working fine.
After the phone resembles...touch doesn't working properly....like scrolling.
sagor1 said:
When the phone was open touche working fine.
After the phone resembles...touch doesn't working properly....like scrolling.
Click to expand...
Click to collapse
It could be faulty touch panel. Contact the provider or if you want to replace it, it costs 10 bucks on amazon. ( Just search by lg g2 touch panel) . Your LCD is fine.
iubjaved said:
It could be faulty touch panel. Contact the provider or if you want to replace it, it costs 10 bucks on amazon. ( Just search by lg g2 touch panel) . Your LCD is fine.
Click to expand...
Click to collapse
Thanx.....bt my previous touches working fine.....so why this was happened....did the shopkeeper change my original touch panel?
sagor1 said:
Thanx.....bt my previous touches working fine.....so why this was happened....did the shopkeeper change my original touch panel?
Click to expand...
Click to collapse
The shopkeeper gave you a LCD with a faulty touchscreen. Always check if everything is working before you pay them.
But sometimes it might be software issue. I suggest you to try one thing, that is if you can flash a new rom, go ahead and do it, then see if the touchscreen problem still persists. If yes, then you have to replace it and get a new one.
Note that : the touchscreen panel stays on top and lcd on bottom, you replaced the whole thing that comes with the panel and lcd so theres no chance shopkeeper changed it, to remove the touch panel, you have to completely destroy it by applying heat and then slowly remove it.
Heres a video to clear it up on how to remove the touch panel : https://www.youtube.com/watch?v=eTKV0RRv2IU
iubjaved said:
The shopkeeper gave you a LCD with a faulty touchscreen. Always check if everything is working before you pay them.
But sometimes it might be software issue. I suggest you to try one thing, that is if you can flash a new rom, go ahead and do it, then see if the touchscreen problem still persists. If yes, then you have to replace it and get a new one.
Note that : the touchscreen panel stays on top and lcd on bottom, you replaced the whole thing that comes with the panel and lcd so theres no chance shopkeeper changed it, to remove the touch panel, you have to completely destroy it by applying heat and then slowly remove it.
Heres a video to clear it up on how to remove the touch panel : https://www.youtube.com/watch?v=eTKV0RRv2IU
Click to expand...
Click to collapse
Ok i will.
I got after useing the smart cover (guess the magnet caused the problems!) a freaking dead bar (spot) on the top of my elephone p9000.
After some research someone wrote he fixd his LG Phone Dead Screen with a electric lighter... so i tryd the same, sounds troll? BUT IT WAS TOTALLY WORKING :silly:
Made a short video about it:
https://youtu.be/O797leeOkOA
send the phone back to elephone via the provider you bought it off. i had same problem with mine it would work in top right corner
It's working again with this Little fix.
Gesendet von meinem P9000 mit Tapatalk
yes it tryed it works
I used this fix today... really works! =)
Didn't work for me. It doesn't seem to arc at the screen. I've got a dead bar right were all the menu buttons are, at the top. So frustrating...
Any other suggestions?
My Xiaomi Redmi 3s's old screen was broken so I imported a new LCD+Touch-screen with frame from china. After fixing the new LCD, display is working perfectly but the touch screen is not working and the surprising thing is the touch screen of the new LCD is working when the phone is connected to a charger! When I unplug the charger the touch screen stops working.
any Idea why its happening? hope someone could help me.
Sent from my SM-G950F using Tapatalk
It could be because the touch screen isn't well powered
menonmanjesh said:
My Xiaomi Redmi 3s's old screen was broken so I imported a new LCD+Touch-screen with frame from china. After fixing the new LCD, display is working perfectly but the touch screen is not working and the surprising thing is the touch screen of the new LCD is working when the phone is connected to a charger! When I unplug the charger the touch screen stops working.
any Idea why its happening? hope someone could help me.
Click to expand...
Click to collapse
Have you try another screen?
If problem persist you need to change the PMI ic or re check your touchscreen vcc ways