Halo gray arrived yesterday and put clear shell case on to prevent finger oil from discoloration of ceramic. Also installed sim card with no issues of puncturing the mic.
Couple questions...
What should I check to make sure my unit is not defective?
Also I upgraded to Pie and factory reset the device and set it up as a new device... At first it let me move app icons around but now it won't. How do I fix that?
Also updated camera app... The 360 camera when connected spins up but won't show image on the screen and won't snap any pictures... Worked a few time for taking three pics then stopped? How do I fix that?
Last question.. selfie cam doesn't seem to have any effect options? Is it hidden somewhere?
Thx
Rebooting the phone seems to have fixed my problems
Related
Dropped my phone a few months back, it was in a trident case. But ever since then the camera has been....off. I didn't notice it at first because I switched roms and when I tried the camera I figured it was just the rom. But every app is the same.
It looks like a combination of posterized + solar effect is always on, and its very low quality. Does not matter what setting you change. You can change MP, turn off effects, mess with color, hue, saturation, flash. All look the same.
So, big deal I figured my camera got damaged. I promptly ordered a new one off ebay, opened the phone up and replaced the camera.
Same thing. Checked the front camera, Same thing.
Was given a broken Mytouch4G by a coworker, took it apart and grabbed the entire top daughterboard with all the IO/camera/microphone connections. Same damn thing.
Wtf did I break?
Second Issue : prior to that I have been living with another issue. I can't access the very bottom of my touchscreen. Sure I can add and remove apps from the dock. But if an app has a thin button on the bottom I simply cannot push it.It will always select whatever is above where I clicked. Currently using latest PACMAN rom, but it has done this with many roms.
Any Idea's? I am going to be upgrading soon but have always wondered if I was the only one.
Hello everyone!
Since I replaced the broken rear camera of my GT-I9505 the camera doesn't focus properly. First I thought it was a faulty replacement, but the replacement of the replacement as well as the camera from a different seller show the same behaviour:
The google drive widget for scanning docs focusses correctly, but none of the available camera apps work. As soon as the app tries to focus the focus goes into near mode and remains there with no further movement.
I have factory reset the phone, reinstalled all camera apps, flashed other roms, factory reset again, with no change.
Has anyone experienced this as well?
Thanks for any tips
suxi
So little rear camera replacements? I guess I am the only fool that managed to crack it
suxi said:
Hello everyone!
Since I replaced the broken rear camera of my GT-I9505 the camera doesn't focus properly. First I thought it was a faulty replacement, but the replacement of the replacement as well as the camera from a different seller show the same behaviour:
The google drive widget for scanning docs focusses correctly, but none of the available camera apps work. As soon as the app tries to focus the focus goes into near mode and remains there with no further movement.
I have factory reset the phone, reinstalled all camera apps, flashed other roms, factory reset again, with no change.
Has anyone experienced this as well?
Thanks for any tips
suxi
Click to expand...
Click to collapse
Hello there
I also have this same problem and done all those same things to fix this. 12cam is now useless. Some1 help us out of our misery! :I
I just picked up the i9505 second hand (first smartphone). Same problem here. I went through 3 camera module parts off eBay... first one was the wrong part (i9500), and other two were supposedly i9505 - same results: camera never focuses. *Sometimes* it will temporarily focus if I moderately shake the phone, even then, only if the phone is tilted upright and not facing down.
Is the front camera unaffected for you guys?
suxi said:
Hello everyone!
Since I replaced the broken rear camera of my GT-I9505 the camera doesn't focus properly. First I thought it was a faulty replacement, but the replacement of the replacement as well as the camera from a different seller show the same behaviour:
The google drive widget for scanning docs focusses correctly, but none of the available camera apps work. As soon as the app tries to focus the focus goes into near mode and remains there with no further movement.
I have factory reset the phone, reinstalled all camera apps, flashed other roms, factory reset again, with no change.
Has anyone experienced this as well?
Thanks for any tips
suxi
Click to expand...
Click to collapse
Might camera hw problem
Hello again
So i got a i9505 s4 dirt cheap (20euros), the screen was broken, last owner said it stopped working when he tried installing cyanogenmod.
I ordered new screen(original), installed stock rom and it got stuck in sview, i tried everything and nothing worked.
Next i tried rom called aosb (i don't remember if its the correct name, similar to cyanogenmod) it got me to home screen, for 15sec it worked great but then screen went black, phone was still going but everytime i tried to unlock it went black again.
Next i took phone apart, maybe i missed something or frogot to connect, but everything looked good. I googeled for possible problems and found that the proximity sensor(next to the top speaker) maybe broken, disconnected it and still same result. For testing purpose i disconnected front camera and phone worked, but only for 20min when the android tried to update gapps and then i was stuck at not able to unlock again.
Took phone apart third time, cleaned all the contacts etc, installed cyanogenmod and it works, but without front camera.
So my questions are
1. Has anyone ever seen anything like this?
2. Is there a way to use back camera without front one being connected? i can live without front camera
3. Why it goes to sview with stock rom?
Sorry for my english.
I hope somebody can help me.
Sir Tox said:
So my questions are
1. Has anyone ever seen anything like this?
2. Is there a way to use back camera without front one being connected? i can live without front camera
3. Why it goes to sview with stock rom?
Sorry for my english.
I hope somebody can help me.
Click to expand...
Click to collapse
Well try changing the ear piece module..its something in it maybe.. the proximity sensors are with the earpiece module..
1. Sview random appearances have been noted by many, there must be more to the mystery of this broken S4. A possible magnet sensor error..try disabling it via the xposed modules..anyhow.
2. Well you disconnect the font cam and everything works fine? Eh..never heard something like that..
3. Maybe because of a broken/weird magnetic sensor. As i said..
Plus are you sure without breaking rhe flex you removed and replaced and removed..
Your front cam not working could be because of a bad connection too..
Best is to try *#0*# in the phone menu and try testing the front cam and everything to check whether everything works fine
All the best
Press Thanks if I helped
Sent from my Samsung Galaxy S4 via XDA app.
Hi,
I have a problem with both Cameras, both are not working and all camera apps show the Camera Busy note. I did the usual (restart, factory reset) nothing solved the problem. Any advice....,.
What does the it say when you open the camera app?
Camera busy please restart the phone.
When factory reset doesn't solve the problem, most probably hardware related issues
I'm having similar problems, including flash light not working as well, I've seen some disassemble videos and noticed that the flash is part of the back frame, so if you remove the back cover and push down, next to the word "camera", on top of the metallic antenna strip, the flashlight will start working and camera sometimes as well, so I've ordered a T4 and T3 screw driver and I'll see if any pins are not connected properly, maybe raise a bit of the pins of the motherboard, that touch the flash contacts on the back frame and see if it fixes it
Let me know if you are still having these issues, if not, how did you fix it.
So I got the phone open and it's very weird, without the back frame removed, the camera works always and when I put it on, it stops working, so I thought that something was shorting some circuit, tried to isolate all contacts from the back frame, antennas and everything just to see it would still happen and it does, so it does not seem to be shorting anything, just the pressure of the cover seems to disable the camera, so what I did for now was add some plastic (old SIM card cut into peaces ), put it between the SIM tray and back frame and all working fine now. It's a temp fix, but it's a fix =D
Hope this can help someone with the same issue.
One more update, what I did on the above post, was only temporary, after a day, it started happening again, no camera, so went back in again, turns out this issue was being cause by the front facing camera, when I removed it, the main camera started working straight away. Now all is good, just no front facing camera which I don't really care for =P but if anyone knows where I can get one, there is a guy on eBay selling one, but £16 seems a bit much, if anyone knows where I can get a front facing camera for the Moto X Play, please let me know.
you solved it?
Hello Team,
I've had my Essential Ph-1 for several years and loved it. Recently I replaced the battery with no issues. However, I notice that since replacing the battery, the stock camera app would not launch with an error initializing the camera, and it said to restart the phone. Rebooting the phone made no difference.
I opened the device back up and carefully checked all the wires and connections, and they're all tight and nothing looks cut, cracked, or disconnected. I tried a third party camera app (OpenCamera), and it worked fine on the front facing camera, but the rear camera was in black and white only. Since then I have tried factory resetting and re-flashing the firmware, and now the front camera works (in third party app) but the rear camera is not even recognized and I don't get an option to swap cameras.
Any suggestions? Is there anything I can check to troubleshoot this further?
TIA!
jbstanford said:
Hello Team,
I've had my Essential Ph-1 for several years and loved it. Recently I replaced the battery with no issues. However, I notice that since replacing the battery, the stock camera app would not launch with an error initializing the camera, and it said to restart the phone. Rebooting the phone made no difference.
I opened the device back up and carefully checked all the wires and connections, and they're all tight and nothing looks cut, cracked, or disconnected. I tried a third party camera app (OpenCamera), and it worked fine on the front facing camera, but the rear camera was in black and white only. Since then I have tried factory resetting and re-flashing the firmware, and now the front camera works (in third party app) but the rear camera is not even recognized and I don't get an option to swap cameras.
Any suggestions? Is there anything I can check to troubleshoot this further?
TIA!
Click to expand...
Click to collapse
As it's happened at the same time as battery replacement you'd have to think the two are related. Possible try a "simulated battery pull" to ensure camera is powered down, that is a force restart, press power button & vol driven together for 15secs (I think). If this doesn't work try disconnect/reconnect any components related to camera. Only other thing I can think of is the camera or related component has received ESD damage form static electricity (most likely a diode or small IC), maybe you can find a cheap bricked or damaged phone for spares, if camera module expensive, assuming it's the camera.
Appreciate the response. I think you're right. I've forced restarted and flashed it back to stock, and while the stock camera doesn't work, I found that if I use a third party app (such as OpenCamera) the rear camera works in Greyscale only (not in Color).
IronRoo said:
As it's happened at the same time as battery replacement you'd have to think the two are related. Possible try a "simulated battery pull" to ensure camera is powered down, that is a force restart, press power button & vol driven together for 15secs (I think). If this doesn't work try disconnect/reconnect any components related to camera. Only other thing I can think of is the camera or related component has received ESD damage form static electricity (most likely a diode or small IC), maybe you can find a cheap bricked or damaged phone for spares, if camera module expensive, assuming it's the camera.
Click to expand...
Click to collapse
jbstanford said:
Appreciate the response. I think you're right. I've forced restarted and flashed it back to stock, and while the stock camera doesn't work, I found that if I use a third party app (such as OpenCamera) the rear camera works in Greyscale only (not in Color).
Click to expand...
Click to collapse
hummmm ... Yes, hard to say for sure boat seems like some hardware issue on the color camera, hope you can find a simple fix.
Appreciate the followup. After looking farther. I see there is a hairline crack in the camera. I bought a parts EssentialPH1 off of eBay for ~$50 and will give swapping them a shot.
jbstanford said:
Appreciate the followup. After looking farther. I see there is a hairline crack in the camera. I bought a parts EssentialPH1 off of eBay for ~$50 and will give swapping them a shot.
Click to expand...
Click to collapse
that would likely explain it, hope you fix it easily (see the video on youtube from Fixeze & ifixit if you haven't already