Since I brought my jasjam it hasnt had a good life. It has been bashed around a bit too much and I only have myself to blame. This unfortunatly has cause the white screen of death getting worse and worse. Taking apart and reseating the ribbon cable to the board appeared to help but it would soon start getting worse again. The short term fix was a thump accros the palm of my hand. Unfortunatly today this back fired in me and now the phone is totally dead. I am fortunate enough to have another Jasjam that i was sorting out a few problems for a friend and this gave me the ability to swap out batteries chargers etc to try and get mine to fire up. No good.
I have taken it apart and checked all cables to no avail. pluggin in usb or charger have no affect. no lights no responce of anysort.
Any suggestions would be a great help
Thanks
Shane
shane11r said:
Since I brought my jasjam it hasnt had a good life. It has been bashed around a bit too much and I only have myself to blame. This unfortunatly has cause the white screen of death getting worse and worse. Taking apart and reseating the ribbon cable to the board appeared to help but it would soon start getting worse again. The short term fix was a thump accros the palm of my hand. Unfortunatly today this back fired in me and now the phone is totally dead. I am fortunate enough to have another Jasjam that i was sorting out a few problems for a friend and this gave me the ability to swap out batteries chargers etc to try and get mine to fire up. No good.
I have taken it apart and checked all cables to no avail. pluggin in usb or charger have no affect. no lights no responce of anysort.
Any suggestions would be a great help
Thanks
Shane
Click to expand...
Click to collapse
That's too much of a challenge to answer - could be any number of things. Without testing it with a multimeter I couldn't say.
What surprises me is that your friend lets you anywhere near his phone - and does he know you use his bits to test out your poor maltreated Hermes
I assume you have looked through the service manual to seek any clues?
Get it at the web link in my signature.
Mike
Thanks f0r you reply Mike
Im sure what he doesnt know wont hurt him anyway its only battery and charger.
Had a look thriough the service manual nothing jumps up and pokes me in the eye. I guess its fairly safe to say the main board has had it.
I cant seem to find anywhere to buy a replacment board and more importantly how much they are so i can see if its viable.
any suggestions
Thanks
Shane
shane11r said:
Thanks f0r you reply Mike
Im sure what he doesnt know wont hurt him anyway its only battery and charger.
Had a look thriough the service manual nothing jumps up and pokes me in the eye. I guess its fairly safe to say the main board has had it.
I cant seem to find anywhere to buy a replacment board and more importantly how much they are so i can see if its viable.
any suggestions
Thanks
Shane
Click to expand...
Click to collapse
From my experience, you can only get motherboards from HTC or their repair outlets - this will cost lot$. Maybe if you're shelling out $$$ why not wait for the Kaiser?
please help my mate's dead Hermes
hi, this is to anyone who can help mainly prof and mikechannon. basically, i was trying to use my mates BRAND NEW hermes to repair my WLAN (Tmobile Hermes). it was working perfectly well until ran the RUU programme. i selected the 1.04SPL so that i could flash the hermes with the new NBH file i created. it flashed a 100% and it turned off and now its not coming back on. i plugged it into the charger, but no luck.i am afraid if i send it back to HTC, they might want to charge me for it. i love this phone badly, but sadly,i have given my mate mine. i dont mind sending this phone o anyone in the UK who can fix it. PLEASE HELP
shelay said:
hi, this is to anyone who can help mainly prof and mikechannon. basically, i was trying to use my mates BRAND NEW hermes to repair my WLAN (Tmobile Hermes). it was working perfectly well until ran the RUU programme. i selected the 1.04SPL so that i could flash the hermes with the new NBH file i created. it flashed a 100% and it turned off and now its not coming back on. i plugged it into the charger, but no luck.i am afraid if i send it back to HTC, they might want to charge me for it. i love this phone badly, but sadly,i have given my mate mine. i dont mind sending this phone o anyone in the UK who can fix it. PLEASE HELP
Click to expand...
Click to collapse
I am not a flashing expert, so POF might be the first person to contact even if it's just to see if this is some recognised thing that can happen despite getting to 100%.
Can we assume the phone is completely dead? ie NO LEDs lit at all even when on charger?
Mike
reply for hermes (mikechannon)
yes it is totally dead. the LED only comes on RED when i take out the battery and stick in the charger.its not responding to anything. i have tried a HARD reset, no luck even a Soft reset too. i am now trying to use microsoft window CE 5 builder software, but i honestly dont think it will work. i really have to fix this phone. it a brand new phone.i tried ringing HTC europe but they are closed today. how can i check if its still under warranty. also, i bought it off some guy on ebay and just had it delivered this morning and now i have managed to brick it
shelay said:
yes it is totally dead. the LED only comes on RED when i take out the battery and stick in the charger.its not responding to anything. i have tried a HARD reset, no luck even a Soft reset too. i am now trying to use microsoft window CE 5 builder software, but i honestly dont think it will work. i really have to fix this phone. it a brand new phone.i tried ringing HTC europe but they are closed today. how can i check if its still under warranty. also, i bought it off some guy on ebay and just had it delivered this morning and now i have managed to brick it
Click to expand...
Click to collapse
Well I think you need to get a reply here or speak to one of the ROM gurus to see if this is a kniwn result of a faulty flash (seems odd to be but I'm no expert)
The phone is not completely dead if the RED led lights when the battey is out. It is meant to do this. Normally if the battey is faulty the LED will also go red when the battery is inserted.
Are you saying that when you put the battery in the Red LED goes out and no LEDs then show?
Mike
I had the same problem as well.
Red LED w/o battery, and NOTHING else.
Battery IN + charger : no LED
Anything else : no LED
Phone wouldnt boot
So I bought from eBay a broken 8525 that was reported to power up, but the screen was broken and some buttons were malfunctioning before the screen broke.
Swapped the motherboards and now I got a functional 8525.
dead hermes
yes, mikechannon, thats excatly what i am saying. when the battery is out and the charger is in, the RED LED comes on. but when the battery and the charger is in, nothing happens
shelay said:
yes, mikechannon, thats excatly what i am saying. when the battery is out and the charger is in, the RED LED comes on. but when the battery and the charger is in, nothing happens
Click to expand...
Click to collapse
I would have been tempted to say to check with another battery in case it was therefore a battery fault. BUT given what alkizmo says above it suggests the issue is as likely to be a blown component on the m/board. The Service Manual Hermes or Wizard ( I forget which) refers to a fuse. However nobody so far has identified a fuse as such. It may be another component (resistor perhaps) that is used to blow if current is exceeded. At present though we do not have sufficient info to either identify this component or bypass it.
Still think it's worth a casual inquiry to the ROM gurus to hear their view on whether this is hard or software related.
Mike
Hermes Dead Battery ??
The Red Light Will Not Work If The Charge Is More Than 50 Per Cent
So Try To Shutdown Your Hermes And Put The Usb Charger Then Reboot Your Hermes
May Be It Will Work
mikechannon said:
Still think it's worth a casual inquiry to the ROM gurus to hear their view on whether this is hard or software related.
Mike
Click to expand...
Click to collapse
Having experienced blown motherboards on a laptop, a desktop and now a cellphone, I can attest to this : If NOTHING powers on at ALL, it is a hardware fault. Before you speak out for laptop/deskop, don't forget about the BIOS, if the BIOS is fried, the motherboard will still power up (fans spinning, lights turning on).
However, maybe that something in the software CAUSED the hardware issue. However, once the damage is done, no changes to the software (even if you could change the software without turning on the phone) would make a difference.
SETOUF said:
The Red Light Will Not Work If The Charge Is More Than 50 Per Cent
So Try To Shutdown Your Hermes And Put The Usb Charger Then Reboot Your Hermes
May Be It Will Work
Click to expand...
Click to collapse
The red light shows when there is no battery as well and the charger is plugged, if there is no battery and the red light doesnt show, you got a problem.
And, shutting down/rebooting is not an option here. The guy's phone won't even light up. It's fried.
Last suggestion of hope : remove the battery and leave the phone unplugged for a whole day. Then put back the battery and do a hard reset attempt.
If this doesnt work, then I got nothing else, as I said, I resulted in replacing the motherboard.
if you cant get it working i will buy the back speaker off you
ok, i am an optimistic person so i will surely try your approach. one question though, as the phone is brand new, do you reckon if i send it back to HTC europe, can they fix it as it is still under warranty?
thanks a lot for your reply. i am an Optimist so i will surely give your method a try. one question though: do you reckon if i send it back to HTC europe, will they fix it as the phone is brand new and still under warranty.although, i bought the phone on ebay brand new from a seller for my mate.its a vodafone branded HTC. cheers
Authorized Dealer?
shelay said:
thanks a lot for your reply. i am an Optimist so i will surely give your method a try. one question though: do you reckon if i send it back to HTC europe, will they fix it as the phone is brand new and still under warranty.although, i bought the phone on ebay brand new from a seller for my mate.its a vodafone branded HTC. cheers
Click to expand...
Click to collapse
Usually, most companies only warranty items from authorized dealers. If the seller was an authorized dealer you are ok. If not, they "might" fix it. Call to make sure before sending it in.
Dead Hermes
My VPA Compact III v1605 seems to have the same type of problem - it only shows red lite when it is plugged in and battery is off, but... but I can also (hardly) recognise 4-colour bootloader-type screen, which blinks once and reappears every time I reset the device.
It doesn't communicate with computer, MTTY says "USB port can not open"...
The difference between usual bootloader screen and this one is that I can't recognise any characters (like IPL/SPL), or maybe because it's hardly seen, I can not see characters?..
Is there any chance to have this device repaired?
Ok, not sure I can help here, but first can we clarify something -
You say the red LED shows with the batter "off". Do you mean with the battery out of the phone?
Mike
Some suggestions...
Hi there,
i messed around a lot with the hermes hardware the last few weeks.
There's a lot of stuff in those mobile that could go wrong
@shane11r
I have taken it apart and checked all cables to no avail. pluggin in usb or charger have no affect. no lights no responce of anysort.
Any suggestions would be a great help
Click to expand...
Click to collapse
Seems like there's some part messed up in hardware.
If you dropped it some times, maybe some component got damaged.
Please check the voltages on board firmly after pressing the power on button with battery inserted. Just like mikeshannon suggested
There have to 3.15V, 1.8v, and ~1.2V around the board.
I will take a picture from the mainboard with testpoints if you like.
Anyway you need some electric skills
Otherwise give to a service center or buy a new mainboard.
@shelay
hi, this is to anyone who can help mainly prof and mikechannon. basically, i was trying to use my mates BRAND NEW hermes to repair my WLAN (Tmobile Hermes). it was working perfectly well until ran the RUU programme. i selected the 1.04SPL so that i could flash the hermes with the new NBH file i created. it flashed a 100% and it turned off and now its not coming back on. i plugged it into the charger, but no luck.
Click to expand...
Click to collapse
This is very similar to what happened to my device. After downgrading from olipro's hard-spl something went wrong. After flashing succeeded with 100% the device got restarted and there it was... nothing!!
What i found out in the meantime is that the IPL was not flashed correctly.
While trying to reflash the device with JTAG debugger, i examined that the NAND write protect signal sticks to GND right after reset.
Maybe this also a hardware issue. I'll find out soon
The bricked IPL-bootloader could also be the cause.
At least if the red light turns on, the DC-DC converter on the hermes is doing well. This means the unit is partially working but not booting.
....nearly forgot to say, that there is also a fuse on the hermes mainboard.
should do some pix
Cheers,
scholbert
Please help me ..does anyone knows the usb ways from the board ? i cracked it .. i found a new one .. but ..when i disambled it .. sow that 2 ways are missing ..they ware taken away with the conector ... i have a picture with it ... pls help me .. i need those two ways ... where do they lead .. i want to make a jump ... pls help me
here is the link of the entire board ... http://forum.xda-developers.com/files/naked-magician-insane.jpg
i've the USB plug if you want it's new..I buy it, because think my xda was falty...but was a battery prob
Hello all ..
i am Mohammed from Egypt it's first time to use HTC TYTN 2 and it's wonderful device ... i have a question about something .. i bought my tytn2 5 days ago and when i looked into the usb slot there was this thin gray plastic that has the copper pins in it .. i noticed a small crack in the last right quarter of this gray plastic which make this gray plastic not completely horizontal it's bent down at last two pins from the right .. lol i know it little weird but i want to make sure that this is not manufacture defect .. and if it was i would replace it
thanks all and i hope that someone will tell me whether if i was right or wrong
Hi Mohamed,
Welcome to XDA-DEV's and to the Kaiser (=TyTN II) world !!
I'm sad to tell you I think this gray piece MUST be horizontal and rectangular.
There's a possibility that somebody put the stylus in the USB connection hole instead of the Soft-Reset hole (near to it).
** Possibly your USB connection does not work properly ** so that, if you have the chance, ask for another device or to repair this one.
Have good luck, and don't stop visiting and collaborating with Xda-dev's !!
thanks m8 i told that to HTC supprot here in egypt but they told me that if the charge is working well and sync too so it's ok and if something happen i would go to them and they will change the usb slot ... so what do u think shall stay with this device or make a problem to change it even if it works in charging and sync very well !!!!
hdlhkhgikn said:
thanks m8 i told that to HTC supprot here in egypt but they told me that if the charge is working well and sync too so it's ok and if something happen i would go to them and they will change the usb slot ... so what do u think shall stay with this device or make a problem to change it even if it works in charging and sync very well !!!!
Click to expand...
Click to collapse
A suggestion from my experience: take a copy of all your communications with technical service, etc. so that if you have problems, you'll be able to ask again without loosing warranty.
If you have the chance to have a new device, I think it's better - maybe you can sync or charge "today" but not "tomorrow", or you can't use another cable or headphones.
Even, if you want to sell your device, it looses value with the broken piece.
thanks m8 i will do what u just said .. thanks so much
Hello everyone,
I'm here because i've a little problem with my d802. Few months ago, i've break my motherboard (i've shorted the capacitors with a screwdriver.. -_-). But now i've buy a new motherboard for my lg g2, she was tested and she work.
I've an idea but not sure if it's the problem : I've don't use my phone and the parts during a long time, may be the battery was drained at 100% and she die ?. anyway, have you got a solution for this problem ?
please help me
Thank you in advance, sorry for my english if it's not 100% understanding but i'm french and don't use english all the time.
Thanks for reading me
edit : the led is blinking, she not stay red.
8 times-pause-8times-pause
I've charge the phone during 5-6hours now
the motherboard have never be rooted
no water damage
May be i've fined the issue
Hello guys,
Hi guys
Today I went to the mobile repair shop to establish a diagnosis.
the guy changed the battery, the phone started , until then, I was happy !
When , just after the boot logo I could see a fabulous " white noise " on my screen .
In my head, I said " if the phone starts, is that it has a charged battery , the problem was not the battery.
Then I remembered this topic: http://forum.xda-developers.com/showpost.php?p=62401112&postcount=13
And I say that it's just me flex cable is dead, what do you think ?
If you think it may be the case this will encourage me to order the part .
To tell a little about my life, I have been fortunate to have the free diagnosis , I did just order the parts myself : p
And voila, if anyone have a problem, that is a way for you.