Hey there, im having an issue were i can only get to either download mode or the emergency recovery screen.
What happened was that i was trying to flash the latest firmware XEU-G935FXXU2ERGE-20180808105405 and it failed after some time, i waited a long time, then i removed the cable and turned the phone off with vol down + power buttons.
At next boot up it showed the emergency mode, so i went along and downloaded Smart Switch, problem is the application says it's an unsupported device.
I can go to download mode, but odin fails every time, the settings in download mode are as follows:
SM-G935F
Binary: Samsung Official
System Status: Custom
FRP Lock: On
Secure Download: Enabled
Warranty Void: 1
AP SwRev: B:2 K:0 S:1
Sometimes Odin gets stuck at "SetupConnection..."
Other times it's the error
"Can't open the specified file. (Line: 1892)"
Any ideas?
Could some mod delete this post? It's amazing, i spent a great part of the night trying to solve this, this morning i created this post, then i went ahead and tried to flash with odin again, only this time i checked re-partition and nand erase, failed again, then i tried again with only nand erase, bam! it worked!
Im very happy now, thanks all anyway.
use last Odin3_v3.13.1
Related
I wanted to reset my rooted device after I had format it into boot it into recovery mode, but I had forgot to turn off the OEM unlock and now I can ONLY access download mode.
HELP!!!!!
Flash stock firmware.
Naked Snake 7575 said:
I wanted to reset my rooted device after I had format it into boot it into recovery mode, but I had forgot to turn off the OEM unlock and now I can ONLY access download mode.
HELP!!!!!
Click to expand...
Click to collapse
I have the a problem that I install other TWRP custom rom and now when I turn the phone gets stuck on a screen that says:
Odin mode (written in red letters)
Product Name: Smg360t1
Current binary: Custom
System status: Custom
Fap lock: off
Qualcomm secureboot: Enable (CSB)
rp swrev: s1, t1, h1, r1, a11, p1
Secure download: enable (written in blue letters).
But the android as it should (I guess) does not appear and can not find the way to fix it
I only have 2 days with the phone and then this . I am a newbie on this field so that may explain why I failed
Can somebody help me? I really would appreciate the help
https://samsung-firmware.org/download/GALAXY CORE PRIME/9q9f/TMB/G360T1UVU1AOFA/G360T1TMB1AOFA/
Download the file abobe extract the file.
Do the rest of things. Best of luck
1. Download and extract a zip file containing your desired firmware.
2. Open Odin Tool.
3. Boot your device in the "Download Mode":
Press Volume Down, Power and Home buttons at same time for 5-8 seconds until download mode is active.
4. Connect your device to PC via the USB cable while in download mode.
5. Next, check the "Auto Reboot" and "F. Reset Time" options in Odin Tool.
6. Hit the AP/PDA button then browse and select a tar.md5 file from the extracted folder.
7. Finally press the start button to begin flashing the firmware update on your device.
@MrBl4ckSh33p
It happened to me to, install samsung kies and restore the firmware
Sent from my Samsung SM-G361F using XDA Labs
somebody can tell me step by step what to do? I'm stuck in a bootloop and i tried to install the stock firmware with odin but it keeps failing Odin says that after i started it, everything is ok and i get a "pass" in Odin but it just keeps rebooting i only can get into download mode, not into recovery mode And when the phone starts to boot, i just get this black screen with the samsung galaxy S5 on it and in the top corner in blue letters "recovery booting ..." and then it goes black and restart ...
Can anybody help me i'm kinda desperate
Hi, try with pit file check your pm´s
israelicky said:
Hi, try with pit file check your pm´s
Click to expand...
Click to collapse
Whatdo i do with the file? Flash it with odin and then? Do i flash a new rom after it?
i tried to flash it again and used that PIT file but still the same result any other suggestions? Or is my phone ready for the recycle bin? :crying:
Flash it whit the rom
Does it say G900F in download mode?
Odin mode
Product Name : SM-G900F
Current binary : Samsung official
System status : Custom
Reactivation lock (KK) : Off
Knox waranty void : 0x1 (2)
Qualcomm secureboot : Enable (CSB)
Ap survey : S1, T1, A1, A1, P1
Secure download : Enable
UDC start
Thats what it says ...
Sounds like something in DATA is corrupted, which ODIN does not wipe
So flashing ROMs with ODIN won't fix it, you need to wipe the phone
Almost the same thing was happening with another member the other day, using ODIN option "Nand erase all" while flashing the ROM to wipe the phone, and then using KIES3 to recover the firmware was their fix
After Nand erase all, the phone would only enter download mode, KIES3 fixed that with the firmware recovery process
http://www.samsung.com/uk/support/usefulsoftware/KIES/
--
Or you could try flashing TWRP with ODIN, and see if you can get into TWRP recovery first, factory reset from there
I tried to put TWRP on my S5 with odin but that didn't work ...
Now i just flashed the phone with a new rom and with "Nand erase all" ticked and then do a firmware upgrade with "Kies" but unfortunately that didn't worked either :crying:
any other suggestions?
In ODIN, uncheck "Auto reboot"
Flash TWRP
When it completes disconnect USB and remove battery to power off
Replace battery and immediately boot into recovery
Volume Up & Home & Power
ANd you need to add more details other than "It didn't work" or we can't help
Ok i did what you suggested and at first it starts up with this on the screen :
Recovery booting .... (in blue letters)
Set warranty bit: recovery (in yellow letters)
then it just reboots without this text on it but it just keeps rebooting ... i dont get to see any thing else but the samsung galaxy s5 powered by android screen ...
And what does KIES firmware recovery say?
With the kies program i get thesame result ... it just stucks in the bootloop ...
No, what does KIES say when you run the firmware recovery?
I'm going to leave you to it, can't help you when you just keep repeating the same thing "Doesn't work"
Im not home at the moment,i will give it another go when im at home and tell you what it sayw
Ok, i opened Kies and searched for that emergency recovery firmware that you talked about but i don't see a option to select my phone??
Here is a printscreen from kies and my phone connected i download mode ...
http://i1360.photobucket.com/albums/r643/Tom_Mutsaerts/Naamloos2_zpskzwqrxly.jpg
Ok, you may close this topic, i brought the s5 to a repairshop and they are gonna check what the could do ... possible even necessary to replace the touchscreen and lcd according to the salesmen :s
Have been using a S5 for several years which I unlocked bootloader and rooted at the beginning. Been running a NI2 firmware with no problems. Decided I wanted to try a Lineage rom and when I tried to flash it, it failed. I wanted to update to later android so I flash a Stock firmware through ODIN and it work fine for several days. For reasons unknown to me I went into recovery again and did a factory reset. Now when I turned on phone this is all I get and it will no longer let me boot into recovery mode. No matter what key combination I push, I just get the following screen:
ODIN MODE
PRODUCT NAME: SM-G900V
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
REACTIVATION LOCK: OFF
QUALCOMM SECUREBOOT: ENABLE (CSB)
AP SWREV: S1, T2, A1, A2, P1
SECURE DOWNLOAD: ENABLE
UDC START
Software Update Failed
etc etc etc
Tried flashing different firmware in ODIN (3.09 and 3.10) and still boot into same
screen with following line added:
SW REV CHECK FAIL : [aboot] Fused 2 > Binary 1
Have tried Samsung Switch, Kies and Verizon Software Update to no avail. Have uninstalled drivers and reinstalled several times. Also ADB does not recognize phone.
At wits end - any suggestions appreciated!
kd3yt said:
Have been using a S5 for several years which I unlocked bootloader and rooted at the beginning. Been running a NI2 firmware with no problems. Decided I wanted to try a Lineage rom and when I tried to flash it, it failed. I wanted to update to later android so I flash a Stock firmware through ODIN and it work fine for several days. For reasons unknown to me I went into recovery again and did a factory reset. Now when I turned on phone this is all I get and it will no longer let me boot into recovery mode. No matter what key combination I push, I just get the following screen:
ODIN MODE
PRODUCT NAME: SM-G900V
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
REACTIVATION LOCK: OFF
QUALCOMM SECUREBOOT: ENABLE (CSB)
AP SWREV: S1, T2, A1, A2, P1
SECURE DOWNLOAD: ENABLE
UDC START
Software Update Failed
etc etc etc
Tried flashing different firmware in ODIN (3.09 and 3.10) and still boot into same
screen with following line added:
SW REV CHECK FAIL : [aboot] Fused 2 > Binary 1
Have tried Samsung Switch, Kies and Verizon Software Update to no avail. Have uninstalled drivers and reinstalled several times. Also ADB does not recognize phone.
At wits end - any suggestions appreciated!
Click to expand...
Click to collapse
You need to install using odin the last update avaliable for G900V. The last update is QF2. Download from updato and flash it..
Tried flashing QF2 and Odin failed again. I did manage to pick up a new in the box S5 and it arrived today. Works great and it is on 6.0.1 DPF4.
Just wanted everyone to know that the phone is now working!! Had not done anything to the phone since last post. Yesterday took it downstairs to an old computer running XP. When I turned the phone one got a surprise, it booted to the Verizon splash screen and stuck there. Installed ODIN on the computer, was able to put phone in download mode and then ODIN worked and was able to flash the DQH2 rom and phone works great. I now have a back up phone!
kd3yt said:
Just wanted everyone to know that the phone is now working!! Had not done anything to the phone since last post. Yesterday took it downstairs to an old computer running XP. When I turned the phone one got a surprise, it booted to the Verizon splash screen and stuck there. Installed ODIN on the computer, was able to put phone in download mode and then ODIN worked and was able to flash the DQH2 rom and phone works great. I now have a back up phone!
Click to expand...
Click to collapse
glad to hear it all worked out! I was in a very similar situation for the past week (S3 to the rescue), but using the latest Odin and the latest update for my VZW S5, I'm back on the S5. Now to search for regaining root....
RA
Hi everyone,
so it was working perfectly this morning, then i factory resetted it, and used it for a few hours, but forgot to turn on oem unlocking in dev options. And then when i rebooted it it never turned on after that. it showed Custom binary blocked by frp lock on upper right corner in red color.
i had encountered this issue before so i knew the solution, i simply fired up my odin3 3.14. and started flashing my stock rom. after it was done it gave me another error
Failed to mount /system as rw and started restarting after that error.
i had encountered this issue before also, so i knew the solution, i downloaded the latest twrp for herolte, and last time when i did that it successfully installed and then i flashed encyption disabler zip, and it was a happy ending to a stressful evening. but unfortunately this time it wasnt like last time, it was one of those anime fighting comeback scenes where you think you have defeated the villain but he comes back, So this time when i tried flashing the last twrp through odin it said "FAIL!" and on the phone appeared the message "Custom binary (RECOVERY) Blocked By FRP Lock"
please help me fix this phone, i solely use it for watching movies and stuff, no sim card,
ask me any other detail that i might've forgotten to mention.
Here's download mode stats:
ODIN MODE
DOWNLOAD MODE: FAST
PRODUCT NAME: SM-G930F
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEM STATUS: CUSTOM
FRP LOCK: ON
Secure Download: Enabled
WARRENTY VOID: 1 (0x0500)
RP SWREV: B:8 K:6 S:7
Custom Binary(RECOVERY) Blocked by FRP Lock
You guys are my last hope, Send help.....
Hello,
I have a SAMSUNG GALAXY S6 EDGE+ which is not able to boot anymore and contains precious data which I desperately want to recover (images and text messages).
If I let the phone boot normally I got a blank screen (white)
If I press Volume Low + Home + Power the phone directly enter DOWNLOAD MODE,
with de following information on the upper left corner:
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-G928F
CA_ TYPE: CA_3
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
FAP LOCK: OFF
Secure Download : Enabled
KNOX WARRANTY VOID: 0 (0x0000)
AP SWREV: B:5 K:0 S:1
On the middle of the screen I can read
Downloading...
Do not turn off target
I never unlocked the boot-loader and/or installed custom recovery on this phone
I tried to :
Unlock boot-loader with Heimdall (or odin), in order to install TWRP
Problem: the phone is not in developer mode, so Heimdall failed to unlock the boot-loader
Recover data using Fone Paw for Android (trial 30 days version)
My phone model (SM-G928F) is not listed in the phone model list
It doesn't look like Fone Paw is able to access the device if I choose another phone model
I didn't try to :
Re-install stock Samsung-OS using ODIN
I'm afraid this will erase the data on the phone
I would appreciate if someone with some experiences on the subject could give me some advices here, what are my options to recover the data ?
Thanks for your help,
Regards,