Related
Hey,
I am having some issues with CyanogenMod, seems to be all versions from old to new, crashing. Any time I open an app, or use the dialer, it will crash, and force close on the app.. Any ideas?
I would say do what I did...I was always going after the experimental build and then back to stable and I would get the crash. For me I wiped twice in a row then I loaded the stable rom and that cleared my issues.
rpope904 said:
Hey,
Any ideas?
Click to expand...
Click to collapse
Yes, posting in the correct section of the forum helps.
Run the partition fix from cyans recovery. Doing this after flashing the new rom fixed this issue when I had it.
Start asking your questions in the right sub-forum (Q&A) (Theme) or even in (General), or simply search.......Final result will be a ban for you up too 3 days.
Thanks
Thread Trashed!!
Im running vipperom frozen ext4 and i have 5 issues with this rom please help me solve these problems...thanks in advance
issue 1: Wireless tether running really slow when tethered to my laptop
issue 2: Viperrom frozen lags a little when transitioning to different screens and is not so responsive at times
issue 3: Dont know if i have to install lag fix on this rom
issue 4: Cant figure out on how to setup free wired usb tether like i use to have on my motororola droid running cyanogenmod
issue 5: Do i need to install governor killer with this rom
other than that i love the viper team i have already donated to the team for all the great roms that they have created thanks
This needs to get deleted. Double post. Mods please.
Pretty sure you should post ROM specific questions on that ROM's thread, instead of a) creating a new thread about it, and b) creating a new thread about it in development instead of Q&A. Reported (as if it does any good anymore).
leatherneck6017 said:
Pretty sure you should post ROM specific questions on that ROM's thread, instead of a) creating a new thread about it, and b) creating a new thread about it in development instead of Q&A. Reported (as if it does any good anymore).
Click to expand...
Click to collapse
Thought you needed 10 posts to post in development! Guess there not inforcing it.
I recently picked up a used, rooted TF101 and I am loving it. The rom on it was a fairly unstable release of ICS and I quickly changed it to Rev.HD and it works great.
But, the previous rom had the ability to add a couple of programs to the unlock circle as well as the ability to hold the power button and reboot, reboot into recovery and power down the unit. These functions are not built into Rev. HD unless I am missing something, and that is possible. The other odd thing happens in Google Play, I do not see the whats new section for any of the apps that want to update. I could be missing something, have been using, rooting and roming my Motorola Droids for years, but ICS is a little different.
Thanks Matt
Well I can awnser your first question and indeed there is no advance power menu.
and second, I don't understand your question.
and 3, this topic is totaly wrong.
3a. if you post questions do that in the question forum
3b. this could be posted in the ARHD topic.
Please follow up these comments...
gkillerx said:
and second, I don't understand your question.
and 3, this topic is totaly wrong.
3a. if you post questions do that in the question forum
3b. this could be posted in the ARHD topic.
Click to expand...
Click to collapse
I am new to this site, the banner for the general section was subtitled with "Q&A". If there is a section that is for ARHD and not for development I would be happy to post there, but I have not been here long enough to hit 10 posts so I could not post in the development section.
I will try to explain my last question better... On my phones, in GPlay, when I choose one of my installed apps to update I get several panes. One of the is titled "What's New" and it lists changes in the current version. I do not ever see this pane in ICS GPlay and I really like to review this info. On the tablet when I choose an app to upgrade it goes straight to the "accept and download" pane.
Am I doing something wrong?
You were probably on a cm9 based rom which would explain the power menu with reboot to recovery and such. Megatron is probably closer to what you are looking for.
TF101 Megatron 1.0.4 Guevor test 19.2
The first ROM you had was probably a custom ROM also.
There's two ROM i know that you can customized the lock ring to add apps. AOKP and Team EOS and both those had Power button menu.
The Play Store work a little different on tablet vs phone.
When you see an app with update avaiable, you'll see a panel with teh usual "Open, Update or Uninstall" option.
Click on the app's icon, it will take you to a page with "What's New" ect.
First of all thanks to mike1986 for his work on this ROM.
I bought the Transformer rooted and with REVOLUTION HD ROM installed (don't remember the version 2.... ). After this i updated to 3.2.1 ROM and ALL was perfect. No errors, no random reboots no incompatibility with any app that i needed.
Since I was so confident with this ROM and the quality, I decided to upgrade to the last version (3.4.2) last night. All went ok, booted to lock menu and started to continously reboot. After litle observing I disabled the Wi-Fi and no more reboots. So i started to uninstall all apps related to wi-fi that I had installed in previous ROM (Wi-Fi manager, widget, Auto airplane mode). Than again I enabled the Wi-Fi via setings menu and the reboots returned.
Now i have the transformer with ROM 3.4.2 but no Wi-Fi!!! since it is not a 3G model, this puts me in a very frustrating situation .
Does anybody know how can i solve this matter or please post a link to REVOLUTION HD ROM version 3.2.1!
Many thanks to all and I hope someone can help me with this.
Solved my wi-fi problem
What can I say.... some digging in this forum and one solution was found . Even if the original post say you should not wipe if you are coming from dev's own ROM, actualy you should wipe. I just did that and installed again ROM 3.4.2.
Now all is working as it should!
Thanks again for this to all involved
Other tips. Look for an app here at XDA although I'm not sure if it was a transformer subforum or not called Reboot to Recovery. A shortcut to it on your home screen will give you the ability to reboot to recovery of the ROM you're using didn't offer that.
Sent from my PG86100 using Xparent Purple Tapatalk 2
Good to know!
bsoplinger said:
Other tips. Look for an app here at XDA although I'm not sure if it was a transformer subforum or not called Reboot to Recovery. A shortcut to it on your home screen will give you the ability to reboot to recovery of the ROM you're using didn't offer that.
Sent from my PG86100 using Xparent Purple Tapatalk 2
Click to expand...
Click to collapse
Thank you for this info. i'm stable and happy with ROM 3.4.2. for my next update i'll keep this in mind.
When I first started playing with custom roms, ARHD 3.4.2 was definitely my favorite. It has a very stock feel to it with many optimizations.
But when when I developed a better understanding of recovery and flashing roms, I switched to AOKP and its derivatives. They offer you a lot more customization options. I'm currently running Steel Droid v2 with the Harmony rev3 kernel.
Make sure to make a nandroid backup and use an app like titanium backup to keep everything safe and then experiment and find what's best for you.
ARHD is great, but I like Steel Droid sooooo much more!
Sent from my EPAD using xda app-developers app
To the Moderators:
This is a try at lowering the rate of repeated questions in the CyanogenMod 10.1 official nightlies // discussion thread. I am aware that this thread would probably belong in the "Q&A" section, but I fear that it will get buried and forgotten there. I beg you to consider the idea of this thread and leave it in the "General" section.
Have you flashed a CyanogenMod 10.1 official nightly? Do you have questions and problems? This post is here to help you!
Please read the entirety of this post before asking questions in the CyanogenMod 10.1 official nightlies // discussion thread!
It is assumed that you have read the first post of the CM10.1 thread (called "the OP" in the following).
If you were not able to find your information by yourself, or would not have been able to without this thread, you should reconsider flashing a CM10.1 NIGHTLY.
I will not answer Questions in this thread.
I get a "status 7" message when flashing with CWM!
It seems you are running PhilZ Kernel or a derivative of it. This kernel seems to be broken and unable to flash. Flash Siyah, Dorimanx or any other Kernel via CWM or ODIN, boot to Recovery and try again.
My phone asks for a PIN or some other code which I don't have!
You have a SIM.Locked Phone which was unlocked via an exploit. Samsungs kernel-update fixes a few issues, including those exploits. Use GalaxSim Unlock to re-unlock your phone.
Youtube/Market/GMail crashes!
You need to flash the corresponding 4.2.1 GApps, currently 20121212.
The Clock app (or any other app) crashes!
Go to Settings -> Apps -> All -> Clock (or whatever it was) and delete it's data.
Are there any other kernels supporting CM10.1?
As far as I know, all Siyah-based Kernels should work. Remember that you are not supposed to post on the CyanogenMod 10.1 official nightlies // discussion thread when using a different kernel.
I have flashed [insert any kernel here], now my phone won't boot!
The kernel obviously does not support CM10.1/Android 4.2.1. Reflash the ROM to get the stock kernel back.
Where are the developer and performance options?
Google has hidden them. With good reason. You can render your phone unbootable if you use those incorrectly. To quote Codeworkx: "bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed."
If you apsolutely need to use them, tap Build Number until you are a developer (about 7 times).
I unlocked the Developer Options and tried to use "Simulate Screens". Now my screen is black and won't turn on again!
That is why one does not simply mess around with the dev options. Reboot your phone and press vol. down while it's booting. This will boot it to Secure Mode, where you can go and untick "Simulate Screens". Fixed.
I cannot find Photosphere! Will it be added?
No. Photosphere is not open source and therefore only available for Nexus devices.
Charging speed is very slow!
Due to hardware limitations, there are only three possible charging speeds, one of which is never used. The others are 450mA on USB and 650mA on the charger. Your phone is either draining power while being charged (media scanner?) or has a problem with the USB connector. Try cleaning it CAREFULLY or find the app responsable for the drain with BetterBetteryStats.
I want to disable the Lockscreen Widgets
Use Lockscreen Policy from the Play Store
The weather Icon of Chronus does not show on the lockscreen!
You can maximize widgets in the Lockscreen Settings. All your Lockscreen widgets will be maximized after turining the screen on. If you want to know why there's no better Option read this.
Sometimes I get freezes when scrolling through long lists!
I have never experienced this. People suggest that ticking "Force GPU Rendering" in Developer Options solves this. Other People suggest that forcing GPU rendering breaks other things, e.g. the keyboarld leaves a black space in WhatsApp. I have never experienced this, neither.
My Car Stereo/Handsfree/other Bluetooth device does not work correvtly!
All AOSP 4.2.1 ROMs including the Nexus 4 seem to have problems with Bluetooth, or more specifically A2DP. Rumour has it that it will be fixed in 4.2.2.
I get "Out of storage" messages and can no longer install Apps!
Viber and Lucky pacher are known to trigger this. Try to move them to your external SD card. If that doesn't do the trick, search /data/apps for .odex files and delete them.
I get tons of dumpstate_ril_RESET_BY_CP_SILENTRESET.log files at /data/log !
These are logs of RIL crashes. Do NOT use GetRIL to fix this. Use this instead. These zips flash modem, RIL and a few other related files. They are much more reliable than GetRIL. You can also try to Flash XXLS8 without RIL and hen reflash CM, it comes with XXLS8 RIL.
The rotation- and the acceleration sensor do not work anymore!
Deactivating tilt to scroll in Chrome should help.
Real Racing 3/Simpsons/other games crash after a very short time!
Blamesung. This is a problem with the current mali driver (mali is the graphics chip). Do not expect it to be fixed. There is a possibility to flash older drivers and fix the gaming issues (see siyah kernel), but that will bring the graphical glitches in the UI and keyboard back.
UPDATE: It seems to me that it's not the mali driver, but the audio HAL acting up. I have sudden loss of audio and a game crash a few seconds after, most prominently in World of Goo, and some people report that disabling all things audio via in-game controls fixes the crashing.
I still have a problem that was not discussed here!
Reflash the ROM and wipe cache and dalvik cache in Recovery. Reboot. Delete the data of the app that is misbehaving. Search the CyanogenMod 10.1 official nightlies // discussion thread to see if anyone has had this problem before you, and if there is a fix. If all of this fails, ask in that thread and someone will hopefully try to help you.
IMPORTANT INFORMATION
I have moved on to a Sony Xperia Z. I will not trouble myself with keeping myself, the OP or the thread up to date. If you have very common problems and a solution, PM me and I'll update the OP. If you want to take over the management of this thread, PM me and we'll find a solution.
Happy flashing and bye!
this thread s completely useless... when we have a discussion thread and one development thread in original forum what was the necessity of this'd thread.. does q & a or discussion means different? think before starting a new thread..
I have been considering CM10.1 and aren't too bothered about some of the bugs but the GPS one does concern me. I use my phone as my everyday satnav, does this GPS bug mean that the navigation app is currently useless on CM10.1?
Prashanthme said:
this thread s completely useless... when we have a discussion thread and one development thread in original forum what was the necessity of this'd thread.. does q & a or discussion means different? think before starting a new thread..
Click to expand...
Click to collapse
True, All of the above answers are completely useless, because they have been answered countless times alerady. But still people ask them, sometimes the same question twice in the same thread page. But instead of flaming the questioners, yelling at them, i try to answer them in one, easy to find place. It is an experiment to see if maybe the original thread gets cleaner with this, and more efficient at solving the real problems as well as discussing issues and solutions. In my oppinion, telling people to tap the build number 7 times does not count as discussion...
Coirpre said:
True, All of the above answers are completely useless, because they have been answered countless times alerady. But still people ask them, sometimes the same question twice in the same thread page. But instead of flaming the questioners, yelling at them, i try to answer them in one, easy to find place. It is an experiment to see if maybe the original thread gets cleaner with this, and more efficient at solving the real problems as well as discussing issues and solutions. In my oppinion, telling people to tap the build number 7 times does not count as discussion...
Click to expand...
Click to collapse
I like the experiment an totally agree to the spirit of not flaming.:good:
But I am afraid it will not really help. Too much users who prefer to just ask instead of doing some honest searching.
Prashanthme said:
this thread s completely useless... when we have a discussion thread and one development thread in original forum what was the necessity of this'd thread.. does q & a or discussion means different? think before starting a new thread..
Click to expand...
Click to collapse
If it is not useful, why are you here and commenting on it.
There are people who appreciates others efforts
I think its useful for the people who will be first time flashing CM10.1
Guys what's the difference between stable releases and nightlies? Which one is better?
Sent from my GT-I9100 using xda premium
Kenrokks said:
Guys what's the difference between stable releases and nightlies? Which one is better?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
nightlies have small update day by day. Stable are versions are like milestones. I use cm10.1 nightlies.
Sent from my GT-I9100 using xda premium
Maybe someone can help me with this:
I experience very slow charging with the standard samsung charger and CM 10.1, never saw this before.
tr1cky1 said:
Maybe someone can help me with this:
I experience very slow charging with the standard samsung charger and CM 10.1, never saw this before.
Click to expand...
Click to collapse
updated OP with the answer.
How to get Root access of ADB on this CM 10.1 version?
How to get Root access of ADB on this CM 10.1 version?
On earlier CM version 10 there was "Developer options" in settings were I could simply change that, in "Root access" section.
My problem is that i get this: (shell has been denied superuser permissions) on my Samsung galaxy tab2 7.0 when trying to install app's wirelessly from my computer using "APK Batch Installer" that I found on the internet, ow and on the tab I use adbWireless app.
Typing "su" in terminal emulator and getting access to it doesn't work.
I am trying to solve this for few days and I just now found out that on CM 10 version everything would work if i would get ADB access, so I ended here asking for help. :fingers-crossed:
P.S. Sorry.. Writing this i didn't notice that this treat is for specifically one phone, that's because I googled this But any help would be appreciated.
@Coirpre
Maybe you could ask the mods or TS in this thread to merge, add or link your OP.
It'll help that thread by just pointing queries to the OP.
Good job collecting those info btw.
GT-i9100 | CM10.1 Nightly Stock
voltsb333 said:
@Coirpre
Maybe you could ask the mods or TS in this thread to merge, add or link your OP.
It'll help that thread by just pointing queries to the OP.
Good job collecting those info btw.
GT-i9100 | CM10.1 Nightly Stock
Click to expand...
Click to collapse
I asked Codeworkx to add something similar to the OP of the cm10 thread, but he refused. I will ask as soon as i have the time (25. dec.) and nobody reads the op anyways...
I get a "status 7" message when flashing with CWM![/B]
It seems you are running PhilZ Kernel. This kernel seems to be broken and unable to flash. Flash Siyah or Dorimanx Kernel via ODIN, boot to Recovery and try again.
Click to expand...
Click to collapse
If you get problems installing cm10.1 using the leaked version of Samsung jelly beans insecure kernel. You don't have to flash a kernel using odin.. If you flash sky fires dream kernel.. Reboot recovery and install cm10.1 from this kernel.. Everything works great.
Dream kernel found here:
http://forum.xda-developers.com/showthread.php?p=29129084
Sent from my GT-I9100 using Tapatalk 2
Removed
With all the issues I see I think I will keep my CM9 for long.
At least one of the mentioned problems has already been fixed:
My GPS-tracking shows 2 Km instead of the few hundred meters which i actually run. My average Speed is 100Km/h!
Click to expand...
Click to collapse
Prashanthme said:
this thread s completely useless... when we have a discussion thread and one development thread in original forum what was the necessity of this'd thread.. does q & a or discussion means different? think before starting a new thread..
Click to expand...
Click to collapse
I totally disagree. This thread not only save my time searching countless pages looking for my answer, it also prevented me spamming noob questions in the discussion/development thread. Thanks for the OP's effort for creating this thread. :good::good::good:
Legisy said:
How to get Root access of ADB on this CM 10.1 version?
On earlier CM version 10 there was "Developer options" in settings were I could simply change that, in "Root access" section.
My problem is that i get this: (shell has been denied superuser permissions) on my Samsung galaxy tab2 7.0 when trying to install app's wirelessly from my computer using "APK Batch Installer" that I found on the internet, ow and on the tab I use adbWireless app.
Typing "su" in terminal emulator and getting access to it doesn't work.
I am trying to solve this for few days and I just now found out that on CM 10 version everything would work if i would get ADB access, so I ended here asking for help. :fingers-crossed:
P.S. Sorry.. Writing this i didn't notice that this treat is for specifically one phone, that's because I googled this But any help would be appreciated.
Click to expand...
Click to collapse
Sorry for the late answers, however, i have prewarned in the OP.... Have you given Root access to ADB? it is in the developer options.
jcasares said:
With all the issues I see I think I will keep my CM9 for long.
Click to expand...
Click to collapse
It's not that bad. The only real problem atm is A2DP and bluetooth telephony. the ussues posted here are mostly unimportant or solvable.
TomBishop said:
I totally disagree. This thread not only save my time searching countless pages looking for my answer, it also prevented me spamming noob questions in the discussion/development thread. Thanks for the OP's effort for creating this thread. :good::good::good:
Click to expand...
Click to collapse
You are welcome!
[SIZE=+3]This thread has been created strictly for
Questions & Troubleshooting[/SIZE]
[SIZE=+3]Specific for ParanoidAndroid3.6[/SIZE]
[
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[SIZE=+2]This thread has been created for people to share issues, questions and help
while using this version of ParanoidAndroid3.60[/SIZE]
ParanoidAndroid3.60
PLEASE make sure to thank developer for the dedication to this ROM
Please do not clutter the Development thread with non-development related chatter
See post 2 for FAQ
FAQ
Q Why a special Q&T Thread for a specific ROM??
A The bigger a ROM development thread gets, the greater the chance that posts are being placed in this thread that are not related to the ROM development itself, e.g. problems with flashing, installation, bugs, things not working etc. However this is understandable, it's not according to the guidelines of XDA for Development sections. Therefore the main goals of the ROM specific Q&T threads is to avoid this cluttering of the original develpment thread with these OT posts by redirecting the posters to the ROM specific Q&T thread and also to relieve the developer from answering these post, so he can dedicate his time to developing.
Q How to move my post to the Q&A/T thread?
A Copy the text of your post in the dev's thread, got to the Q&A/T thread and paste it there. After having done that, go back to the dev's thread, edit your post and change the text into: moved to Q&A/T thread, preferably accompanied with a link to this thread.
Q When I'm asked to move my post to the Q#A/T thread, do I have to do that?
A When you're asked to move your post, there will always be given an explanation by the OP of the Q&A/T, e.g. your post is not development related (f.i. SD card problems, etc), so please be so kind to move your post. If you want to help the dev to keep his original thread as clean as possible from OT posts, then the answer is, of course, YES. Although we cannot force you to move your post, it's highly recommended to do so
Q Where can I download this ROM and How do I install?
A You can find the link to download and installation instructions HERE. Pay close attention to this post, everything required for a successful flash is listed right here. If you fail to follow the instructions or meet the requirements for installation, you could run into some problems.
Q What are the known issues with these ROM's?
A See this thread: http://forum.xda-developers.com/showthread.php?t=2341484
Q How’s battery life?
A see this question asked repeatedly across all ROMS. Honestly there is no way to give you an answer based on a ROM. There are too many variables in question and results vary from user to user and device to device. Battery life is going to depend on age and condition of your battery, your use habits with your device, installed apps, tweaks, settings, etc...
Q How do I...
A Ask your questions and report your issues in this thread. You will receive a response and hopefully get you back up and running this ROM to it's fullest
Hi my dear followers of this ROM,
in this post I will explain the goal of this specific thread created for this ROM with the permission of the Developer of this ROM:
This is a statement made in the Q&A/T template thread:
"While our forum has slowly been morphing, the one area we would like to keep original is Development
The goal is to alleviate the OT banter that occurs within any rom. While the XDA forum continues to grow, we need to help users work within the guidelines created by XDA. Over the last couple of years the average rom being created, has become a free for all chat thread. There tends to be much infighting and mod/developer cleaning.
The idea of this template is to create a Questions and Answers for each rom. This is in no way asking for Development to be moved here, rather any and all conversation that is non Development related to your conjoined Q&A."
This means that non-development related posts, should be posted - with the permission of the Dev - in this thread. What are the most common Off Topic posts, that should be posted in this Q&A/T thread?
1. Battery life related posts
2. Will this app work with this ROM
3. SD Card related problems
4. How do I dowmload and install this ROM, etc
Hope to have given you enough information,
kindest regards, Kuzibri
Off topic posts or not in the original Dev's thread?
Hi All Followers of this ROM,
a certain post of a member of one of my Dev's ROM for whom I created a Q&a/T thread set me to think and reconsider what kind of posts is OT or not and how to deal with that.
It is not my intention to be overly strict about what is or is not an OT post, you should decide before you post whether you think it is OT. Consider whether the development of the ROM is helped by your post. Consider also whether someone in the future, searching through the thread, would find your post useful or would it just take up bandwidth.
If there is any doubt as to whether a post is OT, i will not ask you for it to be moved.
If I do decide your post is OT, I will ask you to move it.
If you think it is not OT, please post your reasons in this Q&A thread, quoting post number.
If I or the developer then agree with you, I will delete my post in the dev thread asking you to move it, and the post can stay.
I hope this makes it all clearer.
kindest regards, Kuzibri
Hi,
first, many thanks for kuzibri for creating & monitoring this thread.
My approach to the Q/A thread is to have a place for free discussion where you can share your experience, thoughts about the ROM without posts being deleted by mods. Posts like "Guys, what colors do you use for x and y app?" or "Omg have you seen the new tabUI of the app x and y? Awesome!" Feel free to ask questions as well like described in the above posts from kuzibri.
I do not want to have a strict dev thread in the dev forum though so bugs, errors, issues, install problems, general usage reports or anything development related, etc should still go there.
I am new to the HALO feature on PA. Could you give me a step by step. I installed on NativeSD. It works smoothly as of now. I have not tested it thoroughly, but swiping through screens, opening & closing apps work smoothly.
I could not find how to start HALO. I am really interested .
Partho
Assuming that this ROM is the same as PA on the N4, you start halo by pulling down your notification tray and clicking on the halo icon. It then disappears off your screen but you'll be able to receive all of your notifications in halo once they appear.
Sent from my Nexus 4
can i launch app from halo? i cannot see how to set that up
wan5xp said:
can i launch app from halo? i cannot see how to set that up
Click to expand...
Click to collapse
Yes, you have to download the HALO))) app from play store and you can permanently pin any app you want.
Hi NxStep, NativeSD install on existing ext4 partition alongside other roms.
Wifi, data, halo, 3rd party wifi tethering (barnacle), pie, camera, camcorder all working. Rom is fast and smooth.
Excellent job, thanks.:highfive:
Edit; You may want to install dataGR nativeSD app in future builds
and @kuzibri you may want to change the title of this thread to reflect the new build number 3.68 thanks
Intalled the v1.2 of this ROM via Magldr with data and system in ext4 so pure Native SD.
Super user is missing I noticed. I downloaded SuperSu but required binary update. Tried it but wont continue to update.
What is the exact fixed? Looks like not an issue to everyone. Appreciate anyone assistance.
Sent from my HTC HD2 using xda app-developers app
Robbie P said:
Hi NxStep, NativeSD install on existing ext4 partition alongside other roms.
Wifi, data, halo, 3rd party wifi tethering (barnacle), pie, camera, camcorder all working. Rom is fast and smooth.
Excellent job, thanks.:highfive:
Edit; You may want to install dataGR nativeSD app in future builds
and @kuzibri you may want to change the title of this thread to reflect the new build number 3.68 thanks
Click to expand...
Click to collapse
I'm glad you liked my ROM!
What do you mean by dataGR? I forgot to change something in the installer script that's why the nativeSD app is missing this time, my bad. Will change in the next release!
If you have some spare time, can you test native wifi tethering for me? Because it seems to start for me but my laptop cannot see the network created by the phone. I'm just curious if it works for someone else.
gasanpride said:
Intalled the v1.2 of this ROM via Magldr with data and system in ext4 so pure Native SD.
Super user is missing I noticed. I downloaded SuperSu but required binary update. Tried it but wont continue to update.
What is the exact fixed? Looks like not an issue to everyone. Appreciate anyone assistance.
Sent from my HTC HD2 using xda app-developers app
Click to expand...
Click to collapse
How is it "missing"? Is the superuser option present in the settings? Or did an app try to get su rights and it failed?
Did you install the USB mass storage app? Because it messed up SU for me once. Apart from that it should work well.
NxStep said:
How is it "missing"? Is the superuser option present in the settings? Or did an app try to get su rights and it failed?
Did you install the USB mass storage app? Because it messed up SU for me once. Apart from that it should work well.
Click to expand...
Click to collapse
Yes I tried to runTitanium backup after the install but failed to run - no root access. So downloaded and installed first the SuperUser but TT still failed to run. Uninstalled it then installed the Supersu but also did not work. I will try again from scratch and see.
Sent from my HTC HD2 using xda app-developers app
NxStep said:
I'm glad you liked my ROM!
What do you mean by dataGR? I forgot to change something in the installer script that's why the nativeSD app is missing this time, my bad. Will change in the next release!
If you have some spare time, can you test native wifi tethering for me? Because it seems to start for me but my laptop cannot see the network created by the phone. I'm just curious if it works for someone else.
Click to expand...
Click to collapse
Hi NxStep, yes I meant the NativeSD app written by datagr (sorry mis-spelt name)
Same with me with native wifi tethering, it starts but does not show up on PC. The icon does not appear in notification bar if using encryption. When using open network the icon appeared once but still did not show up on pc.
BTW, I installed titanium backup and the rom granted su rights no problems. Sometimes TB breaks root, happened on tytungs 4.2.2 rom too I think.
I tried to install your Rom with magldr on nativsd (i also have tytungs cm10.1 installed) but i got stuck in the bootscreen i waited for almost an hour but there was the bootscreen all the time i don't know what to do i did a wipe via armoma befor installing can you pleas hell me?
Sorry for my Bad english
Sent from my NexusHD2 using xda app-developers app
I'm having a problem with NAND installation + DataOnExt. If I put both data and system into nand, system works really fast. But if I use the ext partition on my SD card for data, it slows down very much. I know it shouldn't, because my friend's HD2 doesn't slow down like this. I tried reformatting the second partition into ext3 and ext4, but it didn't help and now I have no idea, what could I do. Any suggestions?
schigern said:
I tried to install your Rom with magldr on nativsd (i also have tytungs cm10.1 installed) but i got stuck in the bootscreen i waited for almost an hour but there was the bootscreen all the time i don't know what to do i did a wipe via armoma befor installing can you pleas hell me?
Sorry for my Bad english
Sent from my NexusHD2 using xda app-developers app
Click to expand...
Click to collapse
what is the size of your ext4 partition?
Wagierek said:
I'm having a problem with NAND installation + DataOnExt. If I put both data and system into nand, system works really fast. But if I use the ext partition on my SD card for data, it slows down very much. I know it shouldn't, because my friend's HD2 doesn't slow down like this. I tried reformatting the second partition into ext3 and ext4, but it didn't help and now I have no idea, what could I do. Any suggestions?
Click to expand...
Click to collapse
It could be your sdcard, it might be slower than your friend's one.
Also did you format the sdcard ext4 partition with recovery?
The more information people give here when posting problems, the more chance someone will be able to solve them.
I think I have a 4GB ext 4 partation in a 32GB sdcard class10
Sent from my NexusHD2 using xda app-developers app
Robbie P said:
what is the size of your ext4 partition?
It could be your sdcard, it might be slower than your friend's one.
Also did you format the sdcard ext4 partition with recovery?
The more information people give here when posting problems, the more chance someone will be able to solve them.
Click to expand...
Click to collapse
My SD Partition was 200MB, then I resized it into 400MB, but nothing changed. I don't think my friend has faster SD.
I formatted the partition via recovery, but I made it using PC.
EDIT: Well, nevermind. It was laggy only when I was trying to unlock the screen and a few minutes after ROM installation. Now I found out that laggy unlocking was PA's bug.
hello, I really enjoying your PA rom but i have run into some random issue
HD2 from tmobile with 1024 U.S
I have HD2_Extended_TWRP_2.6.0.0 recovery installed and Magldr loader, and using 400/10 partition size/cache size
I'm using NAND install option from your installer
I had to reinstall your rom 2 times already so far, first time my notification bar disappear completely, than second time I got constant "system UI not responding" error, am I missing something?