CyanogenMod crashing all the time.. - G1 General

Hey,
I am having some issues with CyanogenMod, seems to be all versions from old to new, crashing. Any time I open an app, or use the dialer, it will crash, and force close on the app.. Any ideas?

I would say do what I did...I was always going after the experimental build and then back to stable and I would get the crash. For me I wiped twice in a row then I loaded the stable rom and that cleared my issues.

rpope904 said:
Hey,
Any ideas?
Click to expand...
Click to collapse
Yes, posting in the correct section of the forum helps.

Run the partition fix from cyans recovery. Doing this after flashing the new rom fixed this issue when I had it.

Start asking your questions in the right sub-forum (Q&A) (Theme) or even in (General), or simply search.......Final result will be a ban for you up too 3 days.
Thanks
Thread Trashed!!

Related

Google+ and MIUI builds (1.6.24 & 1.7.1)

Apparently the last two builds have been constantly causing me FC's in Google+ whenever I try to post anything.
I've flashed to Odin, etc etc. the usual business. (Fixed permissions, etc.)
The only build which doesn't cause this issue is build 1.6.17
I've tried both the MIUI.US & MIUI Android builds, and they both are in the same boat.
I've attached what I assume to be the logcat, it's what pops up when I report the issue and it goes to Gmail.
So back to 1.6.17, but just thought I'd see if others are experiencing this issue with the last to builds of MIUI.
Thanks,
Sha'ul
Shaul305 said:
Apparently the last two builds have been constantly causing me FC's in Google+ whenever I try to post anything.
I've flashed to Odin, etc etc. the usual business. (Fixed permissions, etc.)
The only build which doesn't cause this issue is build 1.6.17
I've tried both the MIUI.US & MIUI Android builds, and they both are in the same boat.
I've attached what I assume to be the logcat, it's what pops up when I report the issue and it goes to Gmail.
So back to 1.6.17, but just thought I'd see if others are experiencing this issue with the last to builds of MIUI.
Thanks,
Sha'ul
Click to expand...
Click to collapse
Thanks for the log, just seems to effect very few devices. I posted yesterday how i fixed mine...
hey Thanks for the quick response Nick.
could you direct me to where you posted it.
That way I delete the same thread in the MIUI.US forum?
Thanks again.
Shaul305 said:
hey Thanks for the quick response Nick.
could you direct me to where you posted it.
That way I delete the same thread in the MIUI.US forum?
Thanks again.
Click to expand...
Click to collapse
Ill move your post @miui.us.....letsd make sure this fixes it for you.....Google has changed .....it now has tabs? pretty cool tho
All I did to fix mine is:
Take "browser.apk" out of last weeks rom.
DELETE CURRENT BROWSER vie root explorer or titanium
move last weeks browser apk to the system app folder
change permissions to rw-r-r
Run cache cleaner ng on "old method"
Boot into recovery and wipe dalvik and cache partition
fix permissions
reboot
open titanium and clear user data for " browser"
Try browser.
google works fine for me....it does look different now..it has tabs
TAKE BROWSER OUT OS 1.6.17!
GOOGLE still working fine on new build of energy?.......If that dont fix it ill look at the log you posted, been kinda busy this morning and have to leave at noon
I installed Google+ last night on .24 and have no issues.
rsfaze said:
I installed Google+ last night on .24 and have no issues.
Click to expand...
Click to collapse
It just effects a few devices....
*****EDIT**** I just got a FC while posting but then all was fine........I think it's just still buggy
Shaul305 said:
hey Thanks for the quick response Nick.
could you direct me to where you posted it.
That way I delete the same thread in the MIUI.US forum?
Thanks again.
Click to expand...
Click to collapse
Have you tried changing your location features....make sure gps is off in settings....Logcat says its failing on location search.
I'm going to try this fix now. I'll get back to you if it doesn't work.
I tried it on Energy (1.6.24) and then (1.7.1)
is the fix on 1.7.1?
nickmcminn60 said:
Have you tried changing your location features....make sure gps is off in settings....Logcat says its failing on location search.
Click to expand...
Click to collapse
correct. the gps i've had it off.
nickmcminn60 said:
It just effects a few devices....
*****EDIT**** I just got a FC while posting but then all was fine........I think it's just still buggy
Click to expand...
Click to collapse
yea my FC's are only on posting pics/location or statuses. aside from that, commenting on other posts, looking thru other posts/circles all is well.
just tried a re-install complete wipe etc. did the instructions for the old APK etc. and FC'ing in google and google+
sigh.
guess back to 1.6.17 I go

[Q]Phiremod MIUI?

ok so i flashed over the Phiremod Miui and got constant process.android.acore force closes..like every 10 seconds...i turned off my sync, but left background on and that slowed down the force closes...and of course there is the market issue as well...
it kinda bums me out because i like the MIUI rom...but yeah....anyone out there know of a fix for it?....i dug around in quite a few forums looking and couldn't find anything
i'm bumping this because i am still wondering if anyone has any input whatsoever...
I will reply. I put off responding because for the most part, people don't swear in their posts on this forum. Clean up your act.
2nd, there are threads in the development section for each rom which would address your problem if you would read them.
Nevertheless, when I flash a new rom I always format data, system and cache in clockwork mod recovery. Even tho some say you don't have to, I have found that it leads to a much better install.
I would not install any MIUI rom right now as there are problems with the market. I have not found a decent fix.
Standard cm7 or the MiRage roms are probably best for you.
Cm9 still has glitches that I don't think you are ready to handle (based on your experience with phiremods Miui).
Sent from my NookColor using xda premium
Well i censored myself but that was mainly out of frustration, I usually have been able to fix most of my problems with any of my android devices...and this one was stumping me. I know there are separate threads in the dev section...but i did not have the allotted post count to post in those threads and did not want to spam a bunch of threads.
So, yeah i'm waiting on CM9 to get less buggy, simply because i want to use my NC as well as modify it, I prefer stable builds to testing or nightlies...I've been through that experience with a couple phones and it did not turn out well.
One of these days i'm going to jump in the deep end and try developing...but, as the rest of you. i'm quite busy when offline..
anyway, thank you for your input...
Apology accepted. Sounds like you know your way around android. But here are some suggestions if you are set on using Phiremods rom.
Again, in the mounts and storage section of recovery, format data, system and cache. Back out and do factory reset/wipe. I know people have said this is not necessary, but I have had problems when I have not done this.
Make sure you are using phiremods gapps. Standard cm7 ones won't work.
The market will fc. That is a given. You can uninstall updates to a certain point, then it will fc anyway.
I love the miui roms myself and am so sad that there is no new development on them for the nook.
I am using MiRage rom currently and am happy with it. I have also flashed samiams's cm9 and loved it but until they find a way to up the resolution and get video going, its not a daily driver for me.
If you are still having problems, post your install precedure and I'll see if I can help
Sent from my NookColor using xda premium
k8108 said:
Apology accepted. Sounds like you know your way around android. But here are some suggestions if you are set on using Phiremods rom.
Again, in the mounts and storage section of recovery, format data, system and cache. Back out and do factory reset/wipe. I know people have said this is not necessary, but I have had problems when I have not done this.
Make sure you are using phiremods gapps. Standard cm7 ones won't work.
The market will fc. That is a given. You can uninstall updates to a certain point, then it will fc anyway.
I love the miui roms myself and am so sad that there is no new development on them for the nook.
I am using MiRage rom currently and am happy with it. I have also flashed samiams's cm9 and loved it but until they find a way to up the resolution and get video going, its not a daily driver for me.
If you are still having problems, post your install precedure and I'll see if I can help
Sent from my NookColor using xda premium
Click to expand...
Click to collapse
I'll try that out, Also I read from someone that the Dark Market/Black Themed Market will stop the fc's on regular MIUI, So I will try that out as well and let you know...
When I have the time to backup and possibly restore at least

Nexus 7 PA 2.12 Wifi issues..

Posting here as I'm a noob, and consequently can't post to the P.A page directly.
Since this 2.12 update i've been having wifi issues, like from where i am positioned normally I get 1 bar, but its a steady one bar, now i'm often finding i have no internet connection in the same places as i would before.
I did do a dirty flash, so that is most probably where all my problems are arising from, but i'm still really new to this, and any step i take, i worry and fret over.
had some tablet ui bugs after running games, along with all applications running twice when i open recent apps. I don't know where why or when this recent apps double bug occurs, but i've come across it a few times. I believe the tablet ui bug may be related to when i set bobclock (widget) to force, adjusted the size on restart, but then would encounter the icons dropped off bottom of screen, and everything just out of place, like its reverted to old ui.
oh another issue, which has been mentioned many times before, is inability to use google play store, i've fiddled with all the different dpi settings and size, nothing seems to work.
a clean wipe would include
backing up apps/data/p.a sys pref(?)
wiping
cleaning cache's
flashing the same 2.12 p.a zip i dirty flashed before
caches again? or gapps
any dumbing down would be greatly appreciated
Just to say version 2.13 is out. You might want to try updating in the first instance...
Sent from my Nexus 7 using xda premium
StrangerWeather said:
Just to say version 2.13 is out. You might want to try updating in the first instance...
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
oh.. so there is. well i guess i can just skip over 2.12
if doing a dirty flash, when reinstalling gapps, do i have to have deleted them prior to this? or will it just replace/update the old files?
No, you don't need to. Just wipe both caches and install the new version and gapps.
Sent from my Nexus 7 using xda premium
StrangerWeather said:
Just to say version 2.13 is out. You might want to try updating in the first instance...
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
oh cool.... is there a change log? or the question is, where would i see the change log?
Updating ... nevermind, i got what i need
we got any paranoid android avid fans here? running on the nux 7, ofc.
and by avid fan i mean, quite knowledgable, maybe able to help with some issues that may arise, being under 10 post count, there very little i can do it actually get any relevant help, ie to p.a
there is just so much information here, and being new to the android scene, consequently rooting roms and such as well. quite a bit is over my head but i'm doing my best! or well trying
`etcH said:
we got any paranoid android avid fans here? running on the nux 7, ofc.
and by avid fan i mean, quite knowledgable, maybe able to help with some issues that may arise, being under 10 post count, there very little i can do it actually get any relevant help, ie to p.a
there is just so much information here, and being new to the android scene, consequently rooting roms and such as well. quite a bit is over my head but i'm doing my best! or well trying
Click to expand...
Click to collapse
What sort of help are you looking for? I can try to answer any questions you might have, but your best bet is to search the paranoid android forum in the 'Original Development' section.
Sent from my Paranoid Nexus 7
RockNrolling said:
What sort of help are you looking for? I can try to answer any questions you might have, but your best bet is to search the paranoid android forum in the 'Original Development' section.
Sent from my Paranoid Nexus 7
Click to expand...
Click to collapse
i shall head over there and have a browse. will report back, need to get myself to 10posts so i can share bugs and such that i've encountered
Wouldn't Kernel be more specifically tied to WiFi issues? I don't know what PA does to the kernel they include, but if your up to it, you could try another kernel, like franco.Kernel
Oh. Yes. i've been on that page and have trolled through a few hundred pages.
I think I just need to become a bit more familiar with everything in regards to roms flashing and such, its not difficult but i fear i'm sure to do something in the wrong order,
yes i've read guides before you point me there.
gosh this 5 min wait timer for new people is getting on my nerves i didn't think i'd be wanting to reply so fast, but when you guys are on it like this, i can't turn down that kinda service!
another question while i wait for my timer to finish.
initially i flashed pa. 2.11 then gapps along with doing cache business.
since then i flashed 2.12, but not gapps, and consequently having issues with play store (cant open)
can i just go to flashing 2.13 when it finishes downloading and then flash gapps after?
is the latest gapps jb-20120726-signed?
espionage724 said:
Wouldn't Kernel be more specifically tied to WiFi issues? I don't know what PA does to the kernel they include, but if your up to it, you could try another kernel, like franco.Kernel
Click to expand...
Click to collapse
a kernel is one of these things i have no clue about.
i had a mac many years ago, and that got a kernel error, so my knowledge is limited to that its something root related, or there abouts anyway xd
How does one go about implementing one of these kernel do-hickeys?
on a side note, my wireless icon used to show grey and blue.
blue meant connected, grey, i'm not sure.. sometimes worked sometimes didn't
ever since going to 2.12 i've had nothing but grey, seem to have connection as i am downloading from goo, but as mentioned in initial post, connection is definately worse than it was before hand.. any ideas?
`etcH said:
can i just go to flashing 2.13 when it finishes downloading and then flash gapps after?
is the latest gapps jb-20120726-signed?
Click to expand...
Click to collapse
Sorry I took a while, I was in class. First, you always have to reflash gapps when you flash an update or a new ROM.
When you change to a different ROM (i.e. from Slim Bean to Paranoid) it's recommended to do a full wipe/factory reset before flashing the new ROM.
So the procedure for new ROMs is this. Factory reset, wipe cache, wipe dalvik cache, flash ROM, flash gapps, reboot.
The procedure for a ROM update is the same, you just omit the factory reset.
The latest gapps is gapps jb-20120810. You can download it in Goo manager.
`etcH said:
a kernel is one of these things i have no clue about.
i had a mac many years ago, and that got a kernel error, so my knowledge is limited to that its something root related, or there abouts anyway xd
How does one go about implementing one of these kernel do-hickeys?
Click to expand...
Click to collapse
A kernel is what governs your CPU clock speeds and voltage levels, as well as some other things. To flash a kernel, you don't have to wipe anything, just flash the zip file. Whenever you flash a new ROM, it changes your kernel to whatever is stock for that ROM. So if you use a custom kernel, you will have to reflash it.
Sent from my Paranoid Nexus 7
p.a 2.13
might anyone have any idea why after;
wiping both cashes and installing p.a 2.13 then gapps
my youtube comes up with an error from the beginning, unable to start, same goes for if you click it in the app drawer.
i fiddled about with dpi size force and such, but to no avail.
some settings transferred but not all, like the ui, after switching ui back to what i wanted, tab small/mid
i started to recieve trebuchet has stopped working, this keeps popping up but you can just leave it in the back ground and work around it..
wish i could post this in the correct thread..
ah well.
thinking of just re-flashing them both, will do whatever i did this previous time, see if the error returns.
edit: just finished the reflashing of both, no trebuchet error as expected, the youtube one is back, same as the previous flash.
i really don't think i've done anything wrong, but i haven't seen anyone else reporting this error..
edit edit: simple uninstall and reinstall for youtube and problem solved.
hope its an issue localised to me.
`etcH said:
might anyone have any idea why after;
wiping both cashes and installing p.a 2.13 then gapps
my youtube comes up with an error from the beginning, unable to start, same goes for if you click it in the app drawer.
i fiddled about with dpi size force and such, but to no avail.
some settings transferred but not all, like the ui, after switching ui back to what i wanted, tab small/mid
i started to recieve trebuchet has stopped working, this keeps popping up but you can just leave it in the back ground and work around it..
wish i could post this in the correct thread..
ah well.
thinking of just re-flashing them both, will do whatever i did this previous time, see if the error returns.
Click to expand...
Click to collapse
Yeah I would reflash. It could also be a corrupted download, try re-downloading paranoid android 2.13 and then flashing the newer zip to see if that fixes it.
Sent from my Paranoid Nexus 7

[Q&A][CM 10.1] Do you have problems with CyanogenMod 10.1? Read this first!

To the Moderators:
This is a try at lowering the rate of repeated questions in the CyanogenMod 10.1 official nightlies // discussion thread. I am aware that this thread would probably belong in the "Q&A" section, but I fear that it will get buried and forgotten there. I beg you to consider the idea of this thread and leave it in the "General" section.
Have you flashed a CyanogenMod 10.1 official nightly? Do you have questions and problems? This post is here to help you!
Please read the entirety of this post before asking questions in the CyanogenMod 10.1 official nightlies // discussion thread!
It is assumed that you have read the first post of the CM10.1 thread (called "the OP" in the following).
If you were not able to find your information by yourself, or would not have been able to without this thread, you should reconsider flashing a CM10.1 NIGHTLY.
I will not answer Questions in this thread.
I get a "status 7" message when flashing with CWM!
It seems you are running PhilZ Kernel or a derivative of it. This kernel seems to be broken and unable to flash. Flash Siyah, Dorimanx or any other Kernel via CWM or ODIN, boot to Recovery and try again.
My phone asks for a PIN or some other code which I don't have!
You have a SIM.Locked Phone which was unlocked via an exploit. Samsungs kernel-update fixes a few issues, including those exploits. Use GalaxSim Unlock to re-unlock your phone.
Youtube/Market/GMail crashes!
You need to flash the corresponding 4.2.1 GApps, currently 20121212.
The Clock app (or any other app) crashes!
Go to Settings -> Apps -> All -> Clock (or whatever it was) and delete it's data.
Are there any other kernels supporting CM10.1?
As far as I know, all Siyah-based Kernels should work. Remember that you are not supposed to post on the CyanogenMod 10.1 official nightlies // discussion thread when using a different kernel.
I have flashed [insert any kernel here], now my phone won't boot!
The kernel obviously does not support CM10.1/Android 4.2.1. Reflash the ROM to get the stock kernel back.
Where are the developer and performance options?
Google has hidden them. With good reason. You can render your phone unbootable if you use those incorrectly. To quote Codeworkx: "bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed."
If you apsolutely need to use them, tap Build Number until you are a developer (about 7 times).
I unlocked the Developer Options and tried to use "Simulate Screens". Now my screen is black and won't turn on again!
That is why one does not simply mess around with the dev options. Reboot your phone and press vol. down while it's booting. This will boot it to Secure Mode, where you can go and untick "Simulate Screens". Fixed.
I cannot find Photosphere! Will it be added?
No. Photosphere is not open source and therefore only available for Nexus devices.
Charging speed is very slow!
Due to hardware limitations, there are only three possible charging speeds, one of which is never used. The others are 450mA on USB and 650mA on the charger. Your phone is either draining power while being charged (media scanner?) or has a problem with the USB connector. Try cleaning it CAREFULLY or find the app responsable for the drain with BetterBetteryStats.
I want to disable the Lockscreen Widgets
Use Lockscreen Policy from the Play Store
The weather Icon of Chronus does not show on the lockscreen!
You can maximize widgets in the Lockscreen Settings. All your Lockscreen widgets will be maximized after turining the screen on. If you want to know why there's no better Option read this.
Sometimes I get freezes when scrolling through long lists!
I have never experienced this. People suggest that ticking "Force GPU Rendering" in Developer Options solves this. Other People suggest that forcing GPU rendering breaks other things, e.g. the keyboarld leaves a black space in WhatsApp. I have never experienced this, neither.
My Car Stereo/Handsfree/other Bluetooth device does not work correvtly!
All AOSP 4.2.1 ROMs including the Nexus 4 seem to have problems with Bluetooth, or more specifically A2DP. Rumour has it that it will be fixed in 4.2.2.
I get "Out of storage" messages and can no longer install Apps!
Viber and Lucky pacher are known to trigger this. Try to move them to your external SD card. If that doesn't do the trick, search /data/apps for .odex files and delete them.
I get tons of dumpstate_ril_RESET_BY_CP_SILENTRESET.log files at /data/log !
These are logs of RIL crashes. Do NOT use GetRIL to fix this. Use this instead. These zips flash modem, RIL and a few other related files. They are much more reliable than GetRIL. You can also try to Flash XXLS8 without RIL and hen reflash CM, it comes with XXLS8 RIL.
The rotation- and the acceleration sensor do not work anymore!
Deactivating tilt to scroll in Chrome should help.
Real Racing 3/Simpsons/other games crash after a very short time!
Blamesung. This is a problem with the current mali driver (mali is the graphics chip). Do not expect it to be fixed. There is a possibility to flash older drivers and fix the gaming issues (see siyah kernel), but that will bring the graphical glitches in the UI and keyboard back.
UPDATE: It seems to me that it's not the mali driver, but the audio HAL acting up. I have sudden loss of audio and a game crash a few seconds after, most prominently in World of Goo, and some people report that disabling all things audio via in-game controls fixes the crashing.
I still have a problem that was not discussed here!
Reflash the ROM and wipe cache and dalvik cache in Recovery. Reboot. Delete the data of the app that is misbehaving. Search the CyanogenMod 10.1 official nightlies // discussion thread to see if anyone has had this problem before you, and if there is a fix. If all of this fails, ask in that thread and someone will hopefully try to help you.
IMPORTANT INFORMATION
I have moved on to a Sony Xperia Z. I will not trouble myself with keeping myself, the OP or the thread up to date. If you have very common problems and a solution, PM me and I'll update the OP. If you want to take over the management of this thread, PM me and we'll find a solution.
Happy flashing and bye!
this thread s completely useless... when we have a discussion thread and one development thread in original forum what was the necessity of this'd thread.. does q & a or discussion means different? think before starting a new thread..
I have been considering CM10.1 and aren't too bothered about some of the bugs but the GPS one does concern me. I use my phone as my everyday satnav, does this GPS bug mean that the navigation app is currently useless on CM10.1?
Prashanthme said:
this thread s completely useless... when we have a discussion thread and one development thread in original forum what was the necessity of this'd thread.. does q & a or discussion means different? think before starting a new thread..
Click to expand...
Click to collapse
True, All of the above answers are completely useless, because they have been answered countless times alerady. But still people ask them, sometimes the same question twice in the same thread page. But instead of flaming the questioners, yelling at them, i try to answer them in one, easy to find place. It is an experiment to see if maybe the original thread gets cleaner with this, and more efficient at solving the real problems as well as discussing issues and solutions. In my oppinion, telling people to tap the build number 7 times does not count as discussion...
Coirpre said:
True, All of the above answers are completely useless, because they have been answered countless times alerady. But still people ask them, sometimes the same question twice in the same thread page. But instead of flaming the questioners, yelling at them, i try to answer them in one, easy to find place. It is an experiment to see if maybe the original thread gets cleaner with this, and more efficient at solving the real problems as well as discussing issues and solutions. In my oppinion, telling people to tap the build number 7 times does not count as discussion...
Click to expand...
Click to collapse
I like the experiment an totally agree to the spirit of not flaming.:good:
But I am afraid it will not really help. Too much users who prefer to just ask instead of doing some honest searching.
Prashanthme said:
this thread s completely useless... when we have a discussion thread and one development thread in original forum what was the necessity of this'd thread.. does q & a or discussion means different? think before starting a new thread..
Click to expand...
Click to collapse
If it is not useful, why are you here and commenting on it.
There are people who appreciates others efforts
I think its useful for the people who will be first time flashing CM10.1
Guys what's the difference between stable releases and nightlies? Which one is better?
Sent from my GT-I9100 using xda premium
Kenrokks said:
Guys what's the difference between stable releases and nightlies? Which one is better?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
nightlies have small update day by day. Stable are versions are like milestones. I use cm10.1 nightlies.
Sent from my GT-I9100 using xda premium
Maybe someone can help me with this:
I experience very slow charging with the standard samsung charger and CM 10.1, never saw this before.
tr1cky1 said:
Maybe someone can help me with this:
I experience very slow charging with the standard samsung charger and CM 10.1, never saw this before.
Click to expand...
Click to collapse
updated OP with the answer.
How to get Root access of ADB on this CM 10.1 version?
How to get Root access of ADB on this CM 10.1 version?
On earlier CM version 10 there was "Developer options" in settings were I could simply change that, in "Root access" section.
My problem is that i get this: (shell has been denied superuser permissions) on my Samsung galaxy tab2 7.0 when trying to install app's wirelessly from my computer using "APK Batch Installer" that I found on the internet, ow and on the tab I use adbWireless app.
Typing "su" in terminal emulator and getting access to it doesn't work.
I am trying to solve this for few days and I just now found out that on CM 10 version everything would work if i would get ADB access, so I ended here asking for help. :fingers-crossed:
P.S. Sorry.. Writing this i didn't notice that this treat is for specifically one phone, that's because I googled this But any help would be appreciated.
@Coirpre
Maybe you could ask the mods or TS in this thread to merge, add or link your OP.
It'll help that thread by just pointing queries to the OP.
Good job collecting those info btw.
GT-i9100 | CM10.1 Nightly Stock
voltsb333 said:
@Coirpre
Maybe you could ask the mods or TS in this thread to merge, add or link your OP.
It'll help that thread by just pointing queries to the OP.
Good job collecting those info btw.
GT-i9100 | CM10.1 Nightly Stock
Click to expand...
Click to collapse
I asked Codeworkx to add something similar to the OP of the cm10 thread, but he refused. I will ask as soon as i have the time (25. dec.) and nobody reads the op anyways...
I get a "status 7" message when flashing with CWM![/B]
It seems you are running PhilZ Kernel. This kernel seems to be broken and unable to flash. Flash Siyah or Dorimanx Kernel via ODIN, boot to Recovery and try again.
Click to expand...
Click to collapse
If you get problems installing cm10.1 using the leaked version of Samsung jelly beans insecure kernel. You don't have to flash a kernel using odin.. If you flash sky fires dream kernel.. Reboot recovery and install cm10.1 from this kernel.. Everything works great.
Dream kernel found here:
http://forum.xda-developers.com/showthread.php?p=29129084
Sent from my GT-I9100 using Tapatalk 2
Removed
With all the issues I see I think I will keep my CM9 for long.
At least one of the mentioned problems has already been fixed:
My GPS-tracking shows 2 Km instead of the few hundred meters which i actually run. My average Speed is 100Km/h!
Click to expand...
Click to collapse
Prashanthme said:
this thread s completely useless... when we have a discussion thread and one development thread in original forum what was the necessity of this'd thread.. does q & a or discussion means different? think before starting a new thread..
Click to expand...
Click to collapse
I totally disagree. This thread not only save my time searching countless pages looking for my answer, it also prevented me spamming noob questions in the discussion/development thread. Thanks for the OP's effort for creating this thread. :good::good::good:
Legisy said:
How to get Root access of ADB on this CM 10.1 version?
On earlier CM version 10 there was "Developer options" in settings were I could simply change that, in "Root access" section.
My problem is that i get this: (shell has been denied superuser permissions) on my Samsung galaxy tab2 7.0 when trying to install app's wirelessly from my computer using "APK Batch Installer" that I found on the internet, ow and on the tab I use adbWireless app.
Typing "su" in terminal emulator and getting access to it doesn't work.
I am trying to solve this for few days and I just now found out that on CM 10 version everything would work if i would get ADB access, so I ended here asking for help. :fingers-crossed:
P.S. Sorry.. Writing this i didn't notice that this treat is for specifically one phone, that's because I googled this But any help would be appreciated.
Click to expand...
Click to collapse
Sorry for the late answers, however, i have prewarned in the OP.... Have you given Root access to ADB? it is in the developer options.
jcasares said:
With all the issues I see I think I will keep my CM9 for long.
Click to expand...
Click to collapse
It's not that bad. The only real problem atm is A2DP and bluetooth telephony. the ussues posted here are mostly unimportant or solvable.
TomBishop said:
I totally disagree. This thread not only save my time searching countless pages looking for my answer, it also prevented me spamming noob questions in the discussion/development thread. Thanks for the OP's effort for creating this thread. :good::good::good:
Click to expand...
Click to collapse
You are welcome!

Apps crash all the time

Hi all,
I have a Galaxy Note 3 with the latest Resurrection Remix ROM installed. Installed the ROM with a clean flash and everything was working fine (I thought...). Now, every time apps crash. For instance: when I want to upload a video on Instagram, everything works fine but when I hit the ''cut'' button to cut the video, it crashes. Every time at the exact same moment. Same goes for Snapchat when I want to upload a photo or video, it immediately crashes. I have installed the ROM multiple times, I have reinstalled the apps, but nothing works. I'm not using exessive amounts of RAM, so that's not the problem either. I don't see other people with the same ROM having these problems, so I really don't know where to look for a solution. Hoping you guys could provide me with an answer!
Edit: also worth noticing: my phone automatically restarts at least 3 times a day when I'm in the middle of something (like writing a message in WhatsApp).. Never found a solution for that either!
Thanks in advance!
Wipe cache and dalvik?
Ma3lish said:
Hi all,
I have a Galaxy Note 3 with the latest Resurrection Remix ROM installed. Installed the ROM with a clean flash and everything was working fine (I thought...). Now, every time apps crash. For instance: when I want to upload a video on Instagram, everything works fine but when I hit the ''cut'' button to cut the video, it crashes. Every time at the exact same moment. Same goes for Snapchat when I want to upload a photo or video, it immediately crashes. I have installed the ROM multiple times, I have reinstalled the apps, but nothing works. I'm not using exessive amounts of RAM, so that's not the problem either. I don't see other people with the same ROM having these problems, so I really don't know where to look for a solution. Hoping you guys could provide me with an answer!
Edit: also worth noticing: my phone automatically restarts at least 3 times a day when I'm in the middle of something (like writing a message in WhatsApp).. Never found a solution for that either!
Thanks in advance!
Click to expand...
Click to collapse
Wipe cache and dalvik?
trying a different Kernel?
checked with the ROM Dev in ROM Thread?
nijom said:
Wipe cache and dalvik?
trying a different Kernel?
checked with the ROM Dev in ROM Thread?
Click to expand...
Click to collapse
I wiped cache and dalvik before installing. I have also checked in de DEV thread, but there I see no one with the same issues. I have not tried a different Kernel, how can I do that?
Ma3lish said:
I wiped cache and dalvik before installing. I have also checked in de DEV thread, but there I see no one with the same issues. I have not tried a different Kernel, how can I do that?
Click to expand...
Click to collapse
You can find Kernel threads also in Development Forum. Make sure to flash Kernel Cleaner zip file before changing back to stock Kernel. You can flash Kernel zips via recovery. (search the Kernel Thread)
nijom said:
You can find Kernel threads also in Development Forum. Make sure to flash Kernel Cleaner zip file before changing back to stock Kernel. You can flash Kernel zips via recovery. (search the Kernel Thread)
Click to expand...
Click to collapse
Okay thank you will try that! Do I need a specific Kernel which fits my ROM? (sorry for noob questions lol)
Ma3lish said:
Okay thank you will try that! Do I need a specific Kernel which fits my ROM? (sorry for noob questions lol)
Click to expand...
Click to collapse
There are Kernels for 5.0 TW, CM and also 5.1.1 ROMs. Download the proper one.

Categories

Resources