Database Users

[Q] i9500 Philz Odin Howto?

I have followed a few online tutorial and videos but nothing is working right.
Odin Mode
Product Name: GT-i9500
Current Binary: Samsung Official
System Status: Official
Knox Warranty Void: 0
AP SWREV: A3
Odin3 v3.0.9
philz_touch_6.25.0-i9500.tar (also tried .zip.md5 and .tar.md5)
Message in Odin:
Code:
<ID:0/003> Added!
<ID:0/003> Odin v.3 engine (ID: 3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnectio..
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Android version 4.4.2
Baseband version
I9500UBUFNA2
Kernel Version
3.4.5-742022
[email protected] #1
Tue Feb 18 10:07:22 KST 2014
Build number
KOT49H.I9500UBUFNB3
SE for Android status
Enforcing
SEPF_GT-I9500_4.4.2_0010
Fri Feb 28 11:16:02 2014

I also just tried saferoot and got this message:
Code:
[*] Waiting for your phone to appear...
Watch your phone. Unlock it and give permission for the install to run.
[*] Your phone is detected and ready for rooting.
[*] Sending files to your device...
[*] Starting rooting program.
ro.build.product=ja3g
ro.build.id=KOT49H
setsockopt() failed: Bad address.
this device is not supported.
kallsyms_addresses search failed.
[*] Checking if rooting succeeded
[*] Unfortunately, rooting failed. Cleaning up.

root for KOT49H
Garland,
I too was looking to root this same model, did you fiind any solutions? thx

If you want to root, flash TWRP and then flash supersu from TWRP.
https://dl.twrp.me/i9500/

MMC: mmc_write fail ... need your help

Forgot my S5 provided with Omega Software ... well everything went wonderfully.
After plugging in the charger it out and never came back on.
I'm still in the download mode and in the TeamWin recovery. He shows me but as storage in the system "0".
E: can not mount etc ...
Have naturally sought and found some, but was not doing the right thing.
I have tried so far:
-different Odin versions and various PIT
with the version Odin307 running at least the PIT file in the download mode by (download bar in the mobile phone but mmc_write with message fail)
Firmware July G900FXXU1ANG2_G900FDBT1ANG2_G900FXXU1ANG2_HOME.tar --- same message.
KNOX is set to 0x1 (4)
Odin:
<ID: 0/004> initialzation ..
<ID: 0/004> Get PIT for mapping ..
<ID: 0/004> Firmware update start ..
<ID: 0/004> aboot.mbn
<ID: 0/004> NAND WriteStartDocument !!
<ID: 0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
appears in the display as always MMC: fail mmc_write
I urgently need your support and perhaps one with the same problem and a suitable solution
Thx
What to do and in what order and what files I need I need?

Help installing nougat on unlocked at&t samsung s7 edge

Hello,
I bought a Samsung s7 edge in Kenya unlocked at&t
Am trying to update to 7.0 nougat without success.
I downloaded firmware both at&t, afraid, us variant firmwares n tried installing via odin n no success. Odin says complete write fail.
On recovery
It's says SD card update disabled.
Please help.
Device details:
SM-G935F
Product Code: SM-G935AZBAATT
PDA: G935FXXU4BPH1
CSC: G935FXXU4BPH1
Baseband: G935VVRS4APH1
Bootloader: G935AUCS4API2
Changelist: 8575098
Buildnumber: MMB29M.G935FXXU4BPH1
Build date: Fri Sep 9 15:06:55 KST 2016
Android version: 6.0.1

Bashir22 said:
Hello,
I bought a Samsung s7 edge in Kenya unlocked at&t
Am trying to update to 7.0 nougat without success.
I downloaded firmware both at&t, afraid, us variant firmwares n tried installing via odin n no success. Odin says complete write fail.
On recovery
It's says SD card update disabled.
Please help.
Device details:
SM-G935F
Product Code: SM-G935AZBAATT
PDA: G935FXXU4BPH1
CSC: G935FXXU4BPH1
Baseband: G935VVRS4APH1
Bootloader: G935AUCS4API2
Changelist: 8575098
Buildnumber: MMB29M.G935FXXU4BPH1
Build date: Fri Sep 9 15:06:55 KST 2016
Android version: 6.0.1
Click to expand...
Click to collapse
Are you putting the phone in download mode?
Sent from my SAMSUNG-SM-G935A using Tapatalk

rbedell said:
Are you putting the phone in download mode?
Sent from my SAMSUNG-SM-G935A using Tapatalk
Click to expand...
Click to collapse
Yes
I downloaded firmwares, odin, Samsung USB drivers, put phone in download mode, launched odin, loaded the files, connected phone but it says fail. Complete(Write) operation failed.

Bashir22 said:
Yes
I downloaded firmwares, odin, Samsung USB drivers, put phone in download mode, launched odin, loaded the files, connected phone but it says fail. Complete(Write) operation failed.
Click to expand...
Click to collapse
Did you extract the zip into the 4 different files, AP, BL, CSC and I forget the 4th one. Then place them into the correct spots?
Sent from my SAMSUNG-SM-G935A using Tapatalk

rbedell said:
Did you extract the zip into the 4 different files, AP, BL, CSC and I forget the 4th one. Then place them into the correct spots?
Sent from my SAMSUNG-SM-G935A using Tapatalk
Click to expand...
Click to collapse
Yes and all 4 successfully loaded on odin, the phone was detected correctly, odin established communication but it was not able to write.

Bashir22 said:
Yes and all 4 successfully loaded on odin, the phone was detected correctly, odin established communication but it was not able to write.
Click to expand...
Click to collapse
Maybe you need to go to settings development options and make sure that oem unlock has been enabled? IDK man just shooting in the dark now.
Sent from my SAMSUNG-SM-G935A using Tapatalk

rbedell said:
Maybe you need to go to settings development options and make sure that oem unlock has been enabled? IDK man just shooting in the dark now.
Sent from my SAMSUNG-SM-G935A using Tapatalk
Click to expand...
Click to collapse
yeah i have enabled oem unlock, developer options is on.
here is the odin log:
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> param.bin
<ID:0/004> modem_debug.bin
<ID:0/004> Home Binary Download
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
on the phone:
odin mode: (high speed)
product name: sm-g935a
current binary: samsung official
system status: official
frp lock: off
warranty void: 0x0
qualcomm secureboot: enable
ap swarev: b4(2,1,1,1,1) k1 s3
secure download: enable
unsupport dev_type

Bashir22 said:
Hello,
I bought a Samsung s7 edge in Kenya unlocked at&t
Am trying to update to 7.0 nougat without success.
I downloaded firmware both at&t, afraid, us variant firmwares n tried installing via odin n no success. Odin says complete write fail.
On recovery
It's says SD card update disabled.
Please help.
Device details:
SM-G935F
Product Code: SM-G935AZBAATT
PDA: G935FXXU4BPH1
CSC: G935FXXU4BPH1
Baseband: G935VVRS4APH1
Bootloader: G935AUCS4API2
Changelist: 8575098
Buildnumber: MMB29M.G935FXXU4BPH1
Build date: Fri Sep 9 15:06:55 KST 2016
Android version: 6.0.1
Click to expand...
Click to collapse
I was finally able to know the problem.
I was flashing wrong variant.
For example flashing Africa variant on us at&t gives complete write failure.
Flashing any at&t version worked. Both 6 and 7.
Better still I got this:- https://forum.xda-developers.com/at...7-0-g935uoym4bqd2-4-11-17-g935u-t3616834/amp/
So I managed to flash 7 with ota updates. Now am on bra1.

So you needed the international version. Nice.
Sent from my SAMSUNG-SM-G935A using Tapatalk

UN-Lock Samsung Samsung Galaxy J5 Prime SM-G570M (Android 7.0) 2018

Hi, I have a Samsung Samsung Galaxy J5 Prime SM-G570M, it is this year January 2018, with the new security level and Android 7.0, It has Operator (Claro!) and it comes from Colombia.
I need to UN-Lock it and they tell me, first that I degraded it to 6.0.1 to be able to Flash the Recovery CWM and after to rotate it with the Binary SuperSU, the problem is that all the positive attempts I have seen are with Android 6.0.1 and security of the year 2016 or 2017 and I do not know if it results with this Model 2018.
Try Odin3 Flashar but I get an error and have the Security Sector Enabled ("Secure Download: Enabled") in Download Mode:
ERROR Flash Odin3
<ID:0/022> Added!!
<ID:0/022> Odin v.3 engine (ID:22)..
<ID:0/022> File analysis..
<ID:0/022> SetupConnection..
<ID:0/022> Initialzation..
<ID:0/022> Get PIT for mapping..
<ID:0/022> Firmware update start..
<ID:0/022> SingleDownload.
<ID:0/022> recovery.img
<ID:0/022> NAND Write Start!!
<ID:0/022> RQT_CLOSE !!
<ID:0/022>
<ID:0/022> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Secure Download: Enabled
I was also asked to try to Flasher this ROM ORIGINAL Firmware J5 Prime G570M Nougat 7.0, Galaxy J5 prime G570M Totally free of operators. But I do not see it so easy, no more.
With Z3X or Octoplus if I am NOT ROOT I can not do anything, some good opinion from you?
Operation: Info
Selected model: SM-G570M
Software version: 31.5.1
Searching Samsung modem ... detected COM11
Reading phone information ...
Model: SM-G570M
AP version: G570MUBU2BRA3
CSC version: G570MCOM2BRB1
CP version: G570MUBU2BRA3
Product code: SM-G570MWDACOM
Country code CSC: COLOMBIA
CSC Sales Code: COM
Phone SN: R28J2xxxxxx
IMEI: 3534200xxxxxxxx
Unique number: CQ300EE16B818C3
Reading IMEI ... Ready
IMEI: 3534200xxxxxxxx (SIGN: UNKNOWN)
Done with Samsung Tool PRO v.31.5.1
Thank...

Posted in completely wrong section...
Sent from my j5y17lte using XDA Labs

EngelP said:
Hi, I have a Samsung Samsung Galaxy J5 Prime SM-G570M, it is this year January 2018, with the new security level and Android 7.0, It has Operator (Claro!) and it comes from Colombia.
I need to UN-Lock it and they tell me, first that I degraded it to 6.0.1 to be able to Flash the Recovery CWM and after to rotate it with the Binary SuperSU, the problem is that all the positive attempts I have seen are with Android 6.0.1 and security of the year 2016 or 2017 and I do not know if it results with this Model 2018.
Try Odin3 Flashar but I get an error and have the Security Sector Enabled ("Secure Download: Enabled") in Download Mode:
ERROR Flash Odin3
<ID:0/022> Added!!
<ID:0/022> Odin v.3 engine (ID:22)..
<ID:0/022> File analysis..
<ID:0/022> SetupConnection..
<ID:0/022> Initialzation..
<ID:0/022> Get PIT for mapping..
<ID:0/022> Firmware update start..
<ID:0/022> SingleDownload.
<ID:0/022> recovery.img
<ID:0/022> NAND Write Start!!
<ID:0/022> RQT_CLOSE !!
<ID:0/022>
<ID:0/022> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Secure Download: Enabled
I was also asked to try to Flasher this ROM ORIGINAL Firmware J5 Prime G570M Nougat 7.0, Galaxy J5 prime G570M Totally free of operators. But I do not see it so easy, no more.
With Z3X or Octoplus if I am NOT ROOT I can not do anything, some good opinion from you?
Operation: Info
Selected model: SM-G570M
Software version: 31.5.1
Searching Samsung modem ... detected COM11
Reading phone information ...
Model: SM-G570M
AP version: G570MUBU2BRA3
CSC version: G570MCOM2BRB1
CP version: G570MUBU2BRA3
Product code: SM-G570MWDACOM
Country code CSC: COLOMBIA
CSC Sales Code: COM
Phone SN: R28J2xxxxxx
IMEI: 3534200xxxxxxxx
Unique number: CQ300EE16B818C3
Reading IMEI ... Ready
IMEI: 3534200xxxxxxxx (SIGN: UNKNOWN)
Done with Samsung Tool PRO v.31.5.1
Thank...
Click to expand...
Click to collapse
Z3X Samsung Pro Tools has supported binary 2 since ~v31.1. I recommend using a system-less root to achieve the needed results and then reflashing to stock when done.
P.S. Ensure to enable OEM unlock in developers just in case.

Wizardlysense said:
Posted in completely wrong section...
Sent from my j5y17lte using XDA Labs
Click to expand...
Click to collapse
Sorry if I published where I should not, I really did not know where to publish this tread. If you can transfer it, I thank you or tell me where I should post in the future!
Berthfield said:
Z3X Samsung Pro Tools has supported binary 2 since ~v31.1. I recommend using a system-less root to achieve the needed results and then reflashing to stock when done.
P.S. Ensure to enable OEM unlock in developers just in case.
Click to expand...
Click to collapse
This Kernel model in particular has not been left Rooted, when I try it comes out an error message in red, so I was told this model and year, with security 7.0, does not allow it and has to be released with the server requesting (or rellback) with a file that they send to be loaded and flashed with or executed by odin, since the phone does not allow the introduction of the unlock code by screen and keyboard of the mobile.
If I'm wrong or they've given me false information, I hope someone does it to me. Nobody wanted to give me true and valid information, probably to avoid spreading or lost money, I do not know!
Thk....

EngelP said:
Sorry if I published where I should not, I really did not know where to publish this tread. If you can transfer it, I thank you or tell me where I should post in the future!
This Kernel model in particular has not been left Rooted, when I try it comes out an error message in red, so I was told this model and year, with security 7.0, does not allow it and has to be released with the server requesting (or rellback) with a file that they send to be loaded and flashed with or executed by odin, since the phone does not allow the introduction of the unlock code by screen and keyboard of the mobile.
If I'm wrong or they've given me false information, I hope someone does it to me. Nobody wanted to give me true and valid information, probably to avoid spreading or lost money, I do not know!
Thk....
Click to expand...
Click to collapse
In fact I was the one in the wrong here. Got a bit confused due to the post being in the J530 sub-forum.

Can not a Moderator move this Thread?

Samsung galaxy A40 does not start

Hi everyone,
I have the following problem with Samsung A40 SM-A405FN: (phone from Polish distribution)
When trying to start the phone hangs on the first screen (Samsung Galaxy A40 secured by Knox) ​​and does not even go to the "scratching" logo of Samsung. I have already tried many options, i.e. factory reset, wipe partition, download mode - and here software uploading by Odin. Different versions that theoretically uploaded to the phone but still hangs on the first start screen. I still tried to upload COMBINATION_FAC_FA90_A405FNXXU2ASF2_BY Windows4Droid but here, unfortunately, unsuccessful:
<ID: 0/030> Odin engine v (ID: 3.1301) ..
<ID: 0/030> File analysis ..
<ID: 0/030> Total Binary size: 2447 M
<ID: 0/030> SetupConnection ..
<ID: 0/030> Initialzation ..
<ID: 0/030> Set PIT file ..
<ID: 0/030> DO NOT TURN OFF TARGET !!
<ID: 0/030> FAIL!
<ID: 0/030>
<ID: 0/030> Re-Partition operation failed. --- in this case in odin I did not check the additional re-partition option.
<OSM> All threads completed. (succeed 0 / failed 1)
and a message appears on the phone in download mode
Current Binary: Samsung official
FRP LOCK: ON
OEM LOCK: ON (L)
"please get the approval to use factory binaries (pit)"
Uploaded software is 4 files, one file, attempts with PIT file (extracted from * .md5).
What can you still check to pick up the phone?
How can you check if the partition is OK?
If it's the wrong department, please move it to correct session.
Regards,
Lukas