Hi all
My I9505, has turned quite weird today... I tried flashing it with latest NEE firmware, but it failed:
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
And on the handset I get in red writing:
STAT: [224, 1440]
SW REV. CHECK FAIL : fused : 2 , Binary : 1
I can only flash it with:
I9505XXUAMDE_I9505OXXAMD8_NEE
When entering recovery I sometimes get:
"No command" instead of the windows where it sets CSC, sometimes it sets CSC normally
When I try to reset flash counter I get
could not find triangle and counter data
I have also tried flashing with PIT, but that didn't help either...
Any help??
Kind regards
Ratata82 said:
Hi all
My I9505, has turned quite weird today... I tried flashing it with latest NEE firmware, but it failed:
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl3.mbn
<ID:0/005> rpm.mbn
<ID:0/005> aboot.mbn
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
And on the handset I get in red writing:
STAT: [224, 1440]
SW REV. CHECK FAIL : fused : 2 , Binary : 1
I can only flash it with:
I9505XXUAMDE_I9505OXXAMD8_NEE
When entering recovery I sometimes get:
"No command" instead of the windows where it sets CSC, sometimes it sets CSC normally
When I try to reset flash counter I get
could not find triangle and counter data
I have also tried flashing with PIT, but that didn't help either...
Any help??
Kind regards
Click to expand...
Click to collapse
read this
Odin troubleshooting: If Odin accidentally gives you "fail" try the following:
- Repeat procedure.
- Make sure that all actions of Kies are disabled from task manager.
- Change usb port.
- Try another usb cable (make sure it is the original).
- Try another Odin version.
- Uninstall and re-install driver.
- Use pit file.
- Try another computer.
Click to expand...
Click to collapse
samersh72 said:
read this
Click to expand...
Click to collapse
I have already tried all the steps, many times... This is just driving me insane
Ratata82 said:
I have already tried all the steps, many times... This is just driving me insane
Click to expand...
Click to collapse
it is something to do with bootloader
read this http://teamuscellular.com/Forum/topic/4963-★☞-support-touchwizstock-deodexed-jflteuscr970vxuamf5-☜★/?p=77401 post #51
and this http://forum.xda-developers.com/showpost.php?p=43619724&postcount=479
samersh72 said:
it is something to do with bootloader
read this http://teamuscellular.com/Forum/topic/4963-★☞-support-touchwizstock-deodexed-jflteuscr970vxuamf5-☜★/?p=77401 post #51
and this http://forum.xda-developers.com/showpost.php?p=43619724&postcount=479
Click to expand...
Click to collapse
But then I should be able to upgrade it, it fails with every single rom except the oldest. But looks like you are right
Fixed:
The problem was infact the new KNOX secure bootloader. I just upgradet it to I9505XXUDMH8_I9505OXXDMHA_BTU, and that fixed it.
Hopefully we will soon see a bootloader downgrade for new KNOX security Samsung handsets, nothing is unbreakable
Best regards
Please Explain
Ratata82 said:
Fixed:
The problem was infact the new KNOX secure bootloader. I just upgradet it to I9505XXUDMH8_I9505OXXDMHA_BTU, and that fixed it.
Hopefully we will soon see a bootloader downgrade for new KNOX security Samsung handsets, nothing is unbreakable
Best regards
Click to expand...
Click to collapse
can you please explain, how did you fix it. I am facing the same problem :crying:
You can't downgrade which means flash a previous android version
So just flash the newest android version and you'll be ok
I tried to install the 4.4.2 N9005XXUENA6_N9005OXXENA5_N9005XXUENA2 update on my Note 3 via odin 3.09.
Got an ext4 update failed error.
After this, the phone's bricked and is stuck on the Kies Recovery Screen. I tried to go into recovery mode in Kies, but it says this model does not have initialization.
I tried installing a 4.3 N9005XXUDMK3_N9005TNLDMK1_N9005XXUDMK2, but again failed. Download mode shows SW REV CHECK FAIL : [aboot] Fused 3 > Binary 2
Can someone please guide me to unbrick my phone?
I don't know what ROM I was on initially. It was the stock ROM that came with the phone.
I dont have CWM and TWRM installed.
This is not a brick at all. Just add a .pit file and restart the upgrade via Odin again.
You should be fine.
MrAndroid12 said:
This is not a brick at all. Just add a .pit file and restart the upgrade via Odin again.
You should be fine.
Click to expand...
Click to collapse
Thank you for that advice. How do I add a .pit file, and would you happen to have a link where I can download it from?
rinuvimal said:
Thank you for that advice. How do I add a .pit file, and would you happen to have a link where I can download it from?
Click to expand...
Click to collapse
search better mate http://forum.xda-developers.com/showthread.php?t=2550823
tasked28m said:
search better mate http://forum.xda-developers.com/showthread.php?t=2550823
Click to expand...
Click to collapse
I've tried all the .pit files in that thread, bro. None work. Cannot generate own pit as in phone is in recovery mode.
rinuvimal said:
I've tried all the .pit files in that thread, bro. None work. Cannot generate own pit as in phone is in recovery mode.
Click to expand...
Click to collapse
i know cfautoroot has the correct pit file in , try rooting your phone with cfautoroot.
MrAndroid12 said:
This is not a brick at all. Just add a .pit file and restart the upgrade via Odin again.
You should be fine.
Click to expand...
Click to collapse
I tried a variety of N9005 .pits and each time, it shows PIT FAIL: TOTAL SECTORS (30777344) :crying:
(Read OP) . Try flashing the polish firmware again with odin v1.85 and try using different usb ports. Close most of your running applications such as firefox skype etc that can interrupt the process and flash official firmware.
tasked28m said:
(Read OP) . Try flashing the polish firmware again with odin v1.85 and try using different usb ports. Close most of your running applications such as firefox skype etc that can interrupt the process and flash official firmware.
Click to expand...
Click to collapse
Whenever I try the 4.4.2 polish, it fails at system.img.ext4. When I try 4.3, it fails at aboot.
Here's the Odin log for 4.4.2 polish:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENA6_N9005OXXENA5_N9005XXUENA2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
<ID:0/006> sbl1.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> sdi.mbn
<ID:0/006> NON-HLOS.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
bootloop note 3
After installig android 4.4.2, i tried to root with cf-root, now it is in a loop.
I cannot come into in recovery mode.
The phone starts with: -recovery booting,-recovery is not seandroid enforcing,- set warrant bit recovery
when i keep the battery out and then put it in, it says again -recovery booting,-recovery is not seandroid etc.
Who can help me????
rinuvimal said:
Whenever I try the 4.4.2 polish, it fails at system.img.ext4. When I try 4.3, it fails at aboot.
Here's the Odin log for 4.4.2 polish:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENA6_N9005OXXENA5_N9005XXUENA2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> aboot.mbn
<ID:0/006> sbl1.mbn
<ID:0/006> rpm.mbn
<ID:0/006> tz.mbn
<ID:0/006> sdi.mbn
<ID:0/006> NON-HLOS.bin
<ID:0/006> boot.img
<ID:0/006> recovery.img
<ID:0/006> system.img.ext4
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
You won't be able to downgrade back to 4.3 - Use the PDA slot on ODIN and try flashing again.
poedy said:
After installig android 4.4.2, i tried to root with cf-root, now it is in a loop.
I cannot come into in recovery mode.
The phone starts with: -recovery booting,-recovery is not seandroid enforcing,- set warrant bit recovery
when i keep the battery out and then put it in, it says again -recovery booting,-recovery is not seandroid etc.
Who can help me????
Click to expand...
Click to collapse
I answered in your other thread about this...
rinuvimal said:
I tried to install the 4.4.2 N9005XXUENA6_N9005OXXENA5_N9005XXUENA2 update on my Note 3 via odin 3.09.
Got an ext4 update failed error.
After this, the phone's bricked and is stuck on the Kies Recovery Screen. I tried to go into recovery mode in Kies, but it says this model does not have initialization.
I tried installing a 4.3 N9005XXUDMK3_N9005TNLDMK1_N9005XXUDMK2, but again failed. Download mode shows SW REV CHECK FAIL : [aboot] Fused 3 > Binary 2
Can someone please guide me to unbrick my phone?
I don't know what ROM I was on initially. It was the stock ROM that came with the phone.
I dont have CWM and TWRM installed.
Click to expand...
Click to collapse
try to downlaod and flash the 4.4.2 tar again, you cant downgrade to 4.3 as your bootlaoder got upgraded
Edit- darn am i too slow or are you too fast today @radicalisto? second time...LOL :good:
Khizar said:
try to downlaod and flash the 4.4.2 tar again, you cant downgrade to 4.3 as your bootlaoder got upgraded
Edit- darn am i too slow or are you too fast today @radicalisto? second time...LOL :good:
Click to expand...
Click to collapse
15 hour sleep man, seems to have me buzzing around lol :highfive:
Solution
I also have Hong Kong N9005 32GB with N9005XXUBMI5 PDA, tried to flash 4.4.2 with Odin and stuck at "invalid ext4 image", was't able to flash anything after it.
But after 16 hours I finally found a solution:
1. Get leaked Polish ROM (that one with 4 files, do not use the official - it has one file rom)
2. Extract archive
3. Extract "CSC_OXX_N9005OXXENA5_327209_REV03_user_low_ship_MULTI_CERT.tar" and get your pitfile - HLTE_EUR_OPEN.pit
4. Flash your phone with this pitfile and other 4 files from archive (I used Odin 3.09) with repartitioning enabled.
After this procedure I have fully working android 4.4 :victory:
m1ndst0rm said:
I also have Hong Kong N9005 32GB with N9005XXUBMI5 PDA, tried to flash 4.4.2 with Odin and stuck at "invalid ext4 image", was't able to flash anything after it.
But after 16 hours I finally found a solution:
1. Get leaked Polish ROM (that one with 4 files, do not use the official - it has one file rom)
2. Extract archive
3. Extract "CSC_OXX_N9005OXXENA5_327209_REV03_user_low_ship_MULTI_CERT.tar" and get your pitfile - HLTE_EUR_OPEN.pit
4. Flash your phone with this pitfile and other 4 files from archive (I used Odin 3.09) with repartitioning enabled.
After this procedure I have fully working android 4.4 :victory:
Click to expand...
Click to collapse
Have you tried rooting it with Chainfire's CF-Auto Root yet?
m1ndst0rm said:
I also have Hong Kong N9005 32GB with N9005XXUBMI5 PDA, tried to flash 4.4.2 with Odin and stuck at "invalid ext4 image", was't able to flash anything after it.
But after 16 hours I finally found a solution:
1. Get leaked Polish ROM (that one with 4 files, do not use the official - it has one file rom)
2. Extract archive
3. Extract "CSC_OXX_N9005OXXENA5_327209_REV03_user_low_ship_MULTI_CERT.tar" and get your pitfile - HLTE_EUR_OPEN.pit
4. Flash your phone with this pitfile and other 4 files from archive (I used Odin 3.09) with repartitioning enabled.
After this procedure I have fully working android 4.4 :victory:
Click to expand...
Click to collapse
can you show the download link for the leaked rom with 4 files?
vndnguyen said:
can you show the download link for the leaked rom with 4 files?
Click to expand...
Click to collapse
I have no permission to post links yet, but try googling for N3KitKat.rar.torrent
Leaked download link is in my sig (not this cause I am on xda app l check my other posts)
Sent from my SM-N9005 using XDA Premium 4 mobile app
ManUtdRul3 said:
Have you tried rooting it with Chainfire's CF-Auto Root yet?
Click to expand...
Click to collapse
Just tried latest one, ended up in bootloop with "KERNEL IS NOT SEANDROID ENFORCING"...
Now flashing original ROM again.
m1ndst0rm said:
Just tried latest one, ended up in bootloop with "KERNEL IS NOT SEANDROID ENFORCING"...
Now flashing original ROM again.
Click to expand...
Click to collapse
Seems to be a common problem. Hopefully an update to it will fix it.
GT-I9505 failing boot - restarting constantly, failed system update, "no command".
My S4 wanted to install an update: before letting it proceed I thought it would be good t backup - however after/during backup (Kies/ Smart Switch on Windows 10) something happened, and now it fails to boot:
1. get the Samsung splash screen with the model number, followed, eventually with
2. the Samsung colourful grpacis "fireworks" which stop, and then the phone Vibrates/buzzes twice, and then restarts,
3. GOTO '1' - repeating itself continuously.
I've tried recovery reboot - it appears to try to update the system but fails with "no command"
Keis had reported,
Current version: PDAJ2 / PHONEJ2 / csc:0J1 (BTU)
Latest version: PDAK2 / PHONEK2 / cscK1 (BTU)
Size: 1458 MB
Don't seem to be able to do much else (hard reset or wipe cache). I think I can get into download mode - I've no idea what happened or how to get my phone back!
Please help.
Network unlocked phone - sim on monthly with Three / Hutchinson network UK.
Download your phone's firmware from sammobile.com and use Odin to flash it.
There are various tutorials and videos that can guide you through the process.
Unless your problem is hardware related, the above should fix it.
S4 (GT-I9505 LTE) stuck in bootloop, can't boot recovery & ODIN write error.
Okay so Kies 3 and Smart Switch say that the 9505 cannot be "initialised":
Kies3 says:
"Model name: GT-1505
'GT-1505' does not support initialising. "
Smart Switch says :
"Model name: GT-19505
'GT-lg505' does not support initialising.
Please contact our service centre. "
Odin Reports:
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin engine v(ID:3.1203)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> aboot.mbn
<ID:0/009> FAIL!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I suppose this implies the wrong Flash files has been used?
The Device was bought from Three in the UK, and is the GT-I9505, however it never splash-screen the network logo or anything: Recent Verson history AFAIK has been:
I9505XXUHOE3
I9505XXUHOJ2
And then POSSIBLEY a failed update to I9505XXUHPK2
I've tried I9505XXUHOJ2_I9505BTUHOJ1_BTU, and I9505XXUHPK2_I9505BTUHPK1_BTU from sammobile - these both produce the "Complete(Write) operation failed" error, however, I used the "BTU" versions - should I be using the H3G versions?
Many thanks.
Wenger786
It sounds redundant but confirm that the model # in download mode is the gt-i9505.
The aboot.mbn file is not flashing because the file is not for your phone, you need to try a different USB cable, you need to try a different USB 2.0 port, the bootloader in the phone is newer than the bootloader in the firmware, or a combination of these items.
audit13 said:
It sounds redundant but confirm that the model # in download mode is the gt-i9505.
The aboot.mbn file is not flashing because the file is not for your phone, you need to try a different USB cable, you need to try a different USB 2.0 port, the bootloader in the phone is newer than the bootloader in the firmware, or a combination of these items.
Click to expand...
Click to collapse
Still same problems?
Hardware fault?
At this point, I would try the latest versions of the 9505 firmware for other carriers in your country. If that doesn't work, maybe a cell repair shop can flash it using something like an octopus box.
Hi everyone,
I have the following problem with Samsung A40 SM-A405FN: (phone from Polish distribution)
When trying to start the phone hangs on the first screen (Samsung Galaxy A40 secured by Knox) and does not even go to the "scratching" logo of Samsung. I have already tried many options, i.e. factory reset, wipe partition, download mode - and here software uploading by Odin. Different versions that theoretically uploaded to the phone but still hangs on the first start screen. I still tried to upload COMBINATION_FAC_FA90_A405FNXXU2ASF2_BY Windows4Droid but here, unfortunately, unsuccessful:
<ID: 0/030> Odin engine v (ID: 3.1301) ..
<ID: 0/030> File analysis ..
<ID: 0/030> Total Binary size: 2447 M
<ID: 0/030> SetupConnection ..
<ID: 0/030> Initialzation ..
<ID: 0/030> Set PIT file ..
<ID: 0/030> DO NOT TURN OFF TARGET !!
<ID: 0/030> FAIL!
<ID: 0/030>
<ID: 0/030> Re-Partition operation failed. --- in this case in odin I did not check the additional re-partition option.
<OSM> All threads completed. (succeed 0 / failed 1)
and a message appears on the phone in download mode
Current Binary: Samsung official
FRP LOCK: ON
OEM LOCK: ON (L)
"please get the approval to use factory binaries (pit)"
Uploaded software is 4 files, one file, attempts with PIT file (extracted from * .md5).
What can you still check to pick up the phone?
How can you check if the partition is OK?
If it's the wrong department, please move it to correct session.
Regards,
Lukas
My tablet is currently stuck in download mode where every time i try to cancel it, it just reboots back into download mode with the error "recovery:Error validating footer. (6)", "VBMETA T510XXU5CVG2, 54266617A" This occurred while i was messing around trying to root the tablet after i had attempted to flash TWRP to the device (ver: https://twrp.me/samsung/samsunggalaxytaba101wifi2016.html). I believe this is 2016 tab firmware and my tab is a 2019 which may be the reason its bricked, however i have attempted to flash 2 versions of what i believe to be the correct firmware, one from frija and one from samfw, with both failing in odin hanging on SetupConnection. At one point i was able to restart the tablet after these flashes with the error "An error has occurred while updating the device software. Use the Emergency recovery function in the Smart Switch PC software." After which i was able to flash the samfw firmware in a flash that only took 3 seconds to complete without the usual file logs.
logs:
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1401)..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> RQT_CLOSE !!
<ID:0/006> RES OK !!
<ID:0/006> Removed!!
<ID:0/006> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
This allowed me to clear the error but it is back to being stuck on downloading loop.
The bootloader was unlocked prior to this issue and i believe i was on a fresh unmodified boot.img prior to TWRP flash. I have not been able to find any information that has worked in helping me fix this issue.
Product Link: https://www.amazon.com/gp/product/B07Q3T1YJS/
Frija Version: T510XXU5CVG2/T510OXM5CVG2/T510XXU5CVG2
Frija Filename: SM-T510_1_20220725192041_c4u4t0y6d6_fac.zip.enc4
samfw file: https://samfw.com/firmware/SM-T510/XAR/T510XXU5CVG2
I would appreciate any help or advice anyone can give thanks!