Database Users

[GUIDE][addison] FACTORY STOCK IMAGES (ZIPs)

These have just about everything:
This is what you would use - using my guides - to flash your phone :
"firmware center"
https://firmware.center/firmware/Motorola/Moto Z Play/Stock/
"lolinet"
https://mirrors.lolinet.com/firmware/moto/addison/official/
- - - - - - - - - - - - - - - -
The rest of this is an old guide - use my or others later guides
- - - -
NEVER try to downgrade => permanently bricked phone.
ie if you're on nougat, DON'T try to go back to MM.
While I have not tested going from anything back to MM, I have certainly bounced back and forth many times between 7.x and 8.x bootloaders/ROMs - see my other guides.
windows: Remember if you are going to use RSD lite, use the latest one 6.2.4 from here http://rsdlite.en.lo4d.com/ , and start it in admin mode. Earlier versions won't recognize your phone. (boot phone to fastboot screen and usb plug to PC)( do lots of googling if you're using win10.)
Using RSD lite: [GUIDE][addison]RSD lite and adb - writing firmware to phone
OR
Using adb: This one is for India phone on 7.x . Remember never try to downgrade to MM or you will brick your phone. This was 7.x to 7.x .
How to go from Lineage OS 14.1 to stock? (Updated with the process & latest links)
Credit @kkube - see post 5 of above link.
Process to go from custom rom back to stock (August update)
There are several guides on going back from custom rom to full stock, but still I made this guide with latest links. I just went from LOS 14.1 back to full stock. Below is the step I took:
1) Download and install minimal ADB AND FASTBOOT
I used version 1.4.2 which is the latest version https://www.androidfilehost.com/?fid=745425885120698566
2) Download and install motorola drivers
https://motorola-global-portal.custh...ail/a_id/88481
3) Download the latest firmware
I used ADDISON_NPNS26.118-22-1 which has august security updates https://www.androidfilehost.com/?fid=673368273298986785
4) Extract the zip file (firmware) and move all its contents to the folder where you have installed minimal adb and fastboot
5) Create a text file, add the following text to it and save it as "launch.bat" in the same folder.
Quote:
echo off
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash system system.img_sparsechunk.12
fastboot flash oem oem.img
fastboot erase modemst1
fastboot erase modemst2
fastboot erase carrier
fastboot erase cache
fastboot erase userdata
fastboot erase DDR
fastboot flash fsg fsg.mbn
fastboot oem fb_mode_clear
echo -------------------------------------------------------------------------
echo please scroll up and check your flash for any errors
echo -------------------------------------------------------------------------
pause
fastboot reboot
exit
6) Switch off your phone and open it in fastboot mode (press power and volume down button for few seconds after phone as switched off)
7) Connect your mobile to your computer
8) Click on the launch.bat file that you saved and it will install stock firmware on to your mobile. It will take a couple of minutes. (It will wipe everything on your mobile so take a backup of your important data)
9) Once the process is complete, it will ask you to enter any key, after which it will reboot itself.
Once rebooted, you will have full stock, non rooted, and latest firmware with august patches.
Click to expand...
Click to collapse

KrisM22 said:
These have just about everything:
You would likely only use these in a bricked situation and under guidance from someone experienced.
"firmware center"
https://firmware.center/firmware/Motorola/Moto Z Play/Stock/
"lolinet"
https://mirrors.lolinet.com/firmware/moto/addison/official/
NEVER try to downgrade => permanently bricked phone.
windows: Remember if you are going to use RSD lite, use the latest one 6.2.4 from here http://rsdlite.en.lo4d.com/ , and start it in admin mode. Earlier versions won't recognize your phone. (boot phone to fastboot screen and usb plug to PC)( do lots of googling if you're using win10.)
Click to expand...
Click to collapse
And make sure you use Motorola data cable - RSD is super sensitive to it! I nearly got grey before I actually found the reason RSD didn't recognize my phone - I used a random Chinese cable I found in the office.

okaban said:
And make sure you use Motorola data cable - RSD is super sensitive to it! I nearly got grey before I actually found the reason RSD didn't recognize my phone - I used a random Chinese cable I found in the office.
Click to expand...
Click to collapse
Yep, gotta try different cables!!!
Just used it because I forgot Alberto's "verity" patch. So 5 minutes later I'm looking at 7.1.1 Nov 1 which was where I was at before I unlocked BL. Easy!!!

KrisM22 said:
Yep, gotta try different cables!!!
Just used it because I forgot Alberto's "verity" patch. So 5 minutes later I'm looking at 7.1.1 Nov 1 which was where I was at before I unlocked BL. Easy!!!
Click to expand...
Click to collapse
hi friend this firmware also serves for moto z play mexico before installing Lineage OS I had NPNS26.118-22-2-12?

rubencho21 said:
hi friend this firmware also serves for moto z play mexico before installing Lineage OS I had NPNS26.118-22-2-12?
Click to expand...
Click to collapse
I would have no idea.
Do you know what channel you were on? I would guess retla but I only see 6.0.1 for that and you were on 7.1.1 so you certainly don't want to use that! @ TeamMex would probably have a much better idea. Or anyone in Mexico... Let us know if you find out!
EDIT also found this Nougat Moto Z on at&t mexico (this may be compatible with more models) but can't vouch for i since that's for Griffin - different phone.

If you follow my guide, you dont need a software channel..

SupahCookie said:
If you follow my guide, you dont need a software channel..
Click to expand...
Click to collapse
That guide is here [Guide] relock bootloader, and be back to lasted stock rom
You need to be in a custom (not stock) ROM
and need to have settings/developer options/"OEM unlocking" ON (and I assume android debugging (usb debugging) ON. both of those should always be on anyway... :|
I have not personally tried it but lots of folks there say it works.
Remember to give tons of thanks there if it works for you!!! _

KrisM22 said:
That guide is here https://forum.xda-developers.com/moto-z-play/how-to/guide-relock-bootloader-to-lasted-stock-t3718190
Start from back of thread to find latest fix zip link.
latest was at https://forum.xda-developers.com/showpost.php?p=75099150&postcount=126
You need to be in a custom (not stock) ROM
and need to have settings/developer options/"OEM unlocking" ON (and I assume android debugging (usb debugging) ON. both of those should always be on anyway... :|
I have not personally tried it but lots of folks there say it works.
Click to expand...
Click to collapse
Or just use the normal download, its the same link

edit

KrisM22 said:
edit
Click to expand...
Click to collapse
I have stock with unlocked bootloader and rooted with magisk. I have updated to security Feb 2018 then my device just keeps booting to TWRP..
Will this work with unlocked bootoader?
Will this procedure relocked my bootloader?

jeprox said:
I have stock with unlocked bootloader and rooted with magisk. I have updated to security Feb 2018 then my device just keeps booting to TWRP..
Will this work with unlocked bootoader?
Will this procedure relocked my bootloader?
Click to expand...
Click to collapse
Depending on your channel I would use RSD Lite or SupahCookie's thread

bump but only for ROM links at top

KrisM22 said:
These have just about everything:
This is what you would use - using my guides - to flash your phone :
"firmware center"
https://firmware.center/firmware/Motorola/Moto Z Play/Stock/
"lolinet"
https://mirrors.lolinet.com/firmware/moto/addison/official/
- - - - - - - - - - - - - - - -
The rest of this is an old guide - use my or others later guides
- - - -
NEVER try to downgrade => permanently bricked phone.
ie if you're on nougat, DON'T try to go back to MM.
While I have not tested going from anything back to MM, I have certainly bounced back and forth many times between 7.x and 8.x bootloaders/ROMs - see my other guides.
windows: Remember if you are going to use RSD lite, use the latest one 6.2.4 from here http://rsdlite.en.lo4d.com/ , and start it in admin mode. Earlier versions won't recognize your phone. (boot phone to fastboot screen and usb plug to PC)( do lots of googling if you're using win10.)
Using RSD lite: [GUIDE][addison]RSD lite and adb - writing firmware to phone
OR
Using adb: This one is for India phone on 7.x . Remember never try to downgrade to MM or you will brick your phone. This was 7.x to 7.x .
How to go from Lineage OS 14.1 to stock? (Updated with the process & latest links)
Credit @kkube - see post 5 of above link.
Click to expand...
Click to collapse
Hi, Kris. IDK if you're still around but I'm wondering if I can use the RSDLite method and that Android 8 ADDISON_NPNS26.118-22-1 to flash Oreo onto my XT1635-02 software channel attmx which currently has Android 6.0.1 and baseband M8953_10203.02.04.42R ADDISON_ROW_CUST and build number of MPN24.104-25 ?
Can anyone give me some insight on this, please?

Help unable to relock the bootloader

I am trying to relock the bootloader in adb terminal by using command fastboot oem lock I get a message during boot stating that the system has been destroyed and boot loop.
How to relock bootloader with out flashing stock rom
Thanks in advance ?

Vishal21896 said:
I am trying to relock the bootloader in adb terminal by using command fastboot oem lock I get a message during boot stating that the system has been destroyed and boot loop.
How to relock bootloader with out flashing stock rom
Thanks in advance
Click to expand...
Click to collapse
use reflash tutorial from this site:
HTML:
https://xiaomifirmware.com/roms/download-official-roms-xiaomi-mi-a1/
. Just download tool, extract, then exctract downloaded rom in this tool folder. Conect A1 in fastboot and start flash_all_lock.bat file in folder with room (I used flash_all.bat). This is how I fixed my bootlops...

You need to reflash. There's no other way.

Did you have the original stock Oreo with January security patch?
I would also like to re-lock the bootloader but now I have read your post I am unsure if its safe.

Use this command in adb
fastboot oem relock (your unlock code if needed)

Youssef Reda said:
Use this command in adb
fastboot oem relock (your unlock code if needed)
Click to expand...
Click to collapse
If I enter fastboot oem relock with MagiskManager or Magisk 15.3 installed, will I brick the phone?

amzazine said:
If I enter fastboot oem relock with MagiskManager or Magisk 15.3 installed, will I brick the phone?
Click to expand...
Click to collapse
Maybe
I didn't try it but it may brick your phone

Developers should make clear that Re-locking the bootloader is not as easy as the unlock process and there is a high risk you will brick your phone.

i just have this issue ,which is i unlock then i lock the oem and then the message ' system has been destroyed ' and when i try to unlock back the message 'error: oem unlock is not allowed' so i really need your help ..how can i fix my phone ...plsss send a respond quickly

Bootloader unlocked faild MI A1

i can't unlock mi a1 bootloader :crying:
original post
https://forum.xda-developers.com/general/help/oem-unlocked-allowed-mi-a1-bootloader-t3887714
I unlocked its bootloader 5-6 times and also flashed custom roms & downgraded 9.0 pie to nought 2-3 times but now while again downgrading it but now , it just appear a white screen with Mi logo & bootloop
I also tried flashing in edl mode with mi usb cable because i have not (edl cable) but it also does not worked for me with normal cable i have also updated drivers and tried mi flash tool 7.0 & 8.0 stock rom but both are not flashing it shows like ( oem not unlocked) in red color
the command which i tried to unlock bootloader
fastboot oem unlock
fastboot oem edl then tried to flash but nothing happens
i tried older & new version of adb and fastboot
older version
fastboot unlock bootloader
fastboot flashing unlock
also new version commands
both are not worked for me
mi unlock is also not working which i downloaded from here https://en.miui.com/unlock/
but i can access stock recovery
and i wiped all data but it bootloops again
and also partition is not changing
it shows ( unknown option )

ajay424 said:
i can't unlock mi a1 bootloader :crying:
original post
https://forum.xda-developers.com/general/help/oem-unlocked-allowed-mi-a1-bootloader-t3887714
Click to expand...
Click to collapse
flash old nougat 7.8.23 not security you can unlock mode fastboot : fastboot oem unlock

laugeek57 said:
flash old nougat 7.8.23 not security you can unlock mode fastboot : fastboot oem unlock
Click to expand...
Click to collapse
I unlocked its bootloader 5-6 times and also flashed custom roms & downgraded 9.0 pie to nought 2-3 times but now while again downgrading it but now , it just appear a white screen with Mi logo & bootloop
I also tried flashing in edl mode with mi usb cable because i have not (edl cable) but it also does not worked for me with normal cable i have also updated drivers and tried mi flash tool 7.0 & 8.0 stock rom but both are not flashing it shows like ( oem not unlocked) in red color
the command which i tried to unlock bootloader
fastboot oem unlock
fastboot oem edl then tried to flash but nothing happens
i tried older & new version of adb and fastboot
older version
fastboot unlock bootloader
fastboot flashing unlock
also new version commands
both are not worked for me
mi unlock is also not working which i downloaded from here https://en.miui.com/unlock/
but i can access stock recovery
and i wiped all data but it bootloops again
and also partition is not changing
it shows ( unknown option )

ajay424 said:
I unlocked its bootloader 5-6 times and also flashed custom roms & downgraded 9.0 pie to nought 2-3 times but now while again downgrading it but now , it just appear a white screen with Mi logo & bootloop
I also tried flashing in edl mode with mi usb cable because i have not (edl cable) but it also does not worked for me with normal cable i have also updated drivers and tried mi flash tool 7.0 & 8.0 stock rom but both are not flashing it shows like ( oem not unlocked) in red color
the command which i tried to unlock bootloader
fastboot oem unlock
fastboot oem edl then tried to flash but nothing happens
i tried older & new version of adb and fastboot
older version
fastboot unlock bootloader
fastboot flashing unlock
also new version commands
both are not worked for me
mi unlock is also not working which i downloaded from here https://en.miui.com/unlock/
but i can access stock recovery
and i wiped all data but it bootloops again
and also partition is not changing
it shows ( unknown option )
Click to expand...
Click to collapse
With 7.8.23 rom ?

laugeek57 said:
With 7.8.23 rom ?
Click to expand...
Click to collapse
I tried with Android 7.1.2 Nougat (N2G47H.7.8.23)
from this website
https://xiaomifirmware.com/roms/download-official-roms-xiaomi-mi-a1/
but now i am on 8.1 oreo rom which bootloops
but i can't unlock bootloader & without unlocking bootloader i can't flash any rom or recovery

ajay424 said:
I tried with Android 7.1.2 Nougat (N2G47H.7.8.23)
from this website
https://xiaomifirmware.com/roms/download-official-roms-xiaomi-mi-a1/
but i can't unlock bootloader & without unlocking bootloader i can't flash any rom or recovery
Click to expand...
Click to collapse
It's strange because I had problems in December and I flashed the 7.8.23 because I was in bootloop and fastboot mode the command is passed
I used minimal ADB and Fastboot 1.4.3
cable edl not working on mi A1 multi point only

laugeek57 said:
It's strange because I had problems in December and I flashed the 7.8.23 because I was in bootloop and fastboot mode the command is passed
I used minimal ADB and Fastboot 1.4.3
cable edl not working on mi A1 multi point only
Click to expand...
Click to collapse
what should i do please help

ajay424 said:
what should i do please help :crying:
Click to expand...
Click to collapse
The only solution that worked for was to flash stock 7.8.23 rom with miflash by connecting my phone in EDL mode and as I was still in bootloop I remembered that on nougat the command oem unlock could be done ... But when I finally managed to recover an operating system my imei was gone to zero 0 ... I was able to solve with software QST 2.7 and restore my IMEI ... A month of galère lol

laugeek57 said:
The only solution that worked for was to flash stock 7.8.23 rom with miflash by connecting my phone in EDL mode and as I was still in bootloop I remembered that on nougat the command oem unlock could be done ... But when I finally managed to recover an operating system my imei was gone to zero 0 ... I was able to solve with software QST 2.7 and restore my IMEI ... A month of galère lol
Click to expand...
Click to collapse
I had the same problem, but I've got a low-level backup made with cosmicdan's tool and It restored everything.
Wysłane z mojego Mi A1 przy użyciu Tapatalka

relock bootloader

I have Mi 9T Global version Rom ; i unlocked the bootloader and flash Rom EEA european
all work fine now i need help relockin bootloader

If you relock your bootloader, it will format all your data.
You only have to type this fastboot command:
Code:
fastboot oem lock
And if the phone doesn't reboot itself:
Code:
fastboot reboot

REDOTHELLO said:
I have Mi 9T Global version Rom ; i unlocked the bootloader and flash Rom EEA european
all work fine now i need help relockin bootloader
Click to expand...
Click to collapse
Please share here whether EEA ROM still works on Global device after bootloader re-lock.

YuraBY said:
Please share here whether EEA ROM still works on Global device after bootloader re-lock.
Click to expand...
Click to collapse
Ok

May you provide an explanation for your process of installing the ROM starting from twrp please ??

No trwp unlock the bootloader.
Flash fastboot flash clean all adb command
Thats is it i received update miui 11.

there's no way to relock bootloader i tested many ways but. Not work.
If any?

REDOTHELLO said:
there's no way to relock bootloader i tested many ways but. Not work.
If any?
Click to expand...
Click to collapse
What error you are getting when trying to relock?

[ROM][STOCK][FASTBOOT][OP8] Stock Fastboot ROMs for OnePlus 8

Things are changing with the advent of project treble and seamless updates. OnePlus will no longer release ROMs flashable via recovery (either stock) because is no more needed. The updates will be done on the slot not used for example if you are using slot a the update will be installed on slot b and the slot b will be set as default. If you brick and you are in bootloop how you can restore the rom? You can't with Stock ROM you have, because the zip can be only installed via Update Engine, so what can you do? Flash a stock rom via fastboot. I have extracted all images from the stock zip and i have made a new zip with the Fastboot ROM with a flash-all.bat included. This will work only if your bootloader is unlocked. This will erase all your data and will wipe your internal storage.
HOW TO FLASH
This version is only for not branded devices
Download the zip;
Unpack the zip in a folder;
Reboot the OnePlus 8 in fastboot-bootloader mode (Power and volume + and volume-);
Connect the OnePlus 8 to PC;
Run flash-all.bat flasher you need;
Wait until the process end;
The phone will automatically reboot.
DOWNLOAD
All roms on Sourceforge: https://sourceforge.net/projects/fastbootroms/files/OnePlus 8
BRANDED PHONE
For now branded device are not supported
MANUAL FLASH: Windows - OSX - Linux
If you want to manual flash these roms these are the commands (You need the latest sdk platform tools, you can find it here
Is reccomended to format data or the rom cannot boot:
Code:
fastboot -w
Others Commands to flash a fastboot rom
Code:
fastboot flash aop aop.img
fastboot flash bluetooth bluetooth.img
fastboot flash boot boot.img
fastboot flash dsp dsp.img
fastboot flash dtbo dtbo.img
fastboot flash LOGO LOGO.img
fastboot flash modem modem.img
fastboot flash oem_stanvbk oem_stanvbk.img
fastboot flash qupfw qupfw.img
fastboot flash storsec storsec.img
fastboot flash multiimgoem multiimgoem.img
fastboot flash uefisecapp uefisecapp.img
fastboot flash recovery recovery.img
fastboot --disable-verity flash vbmeta vbmeta.img
fastboot --disable-verity flash vbmeta_system vbmeta_system.img
fastboot flash opproduct opproduct.img
fastboot reboot fastboot
fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot flash product product.img
fastboot reboot
REMEMBER
"Invalid sparce file format at header magic" is not an error, you need to wait a bit when you see that string, just wait.
If the device automatically reboot in Stock Recovery mode don't reboot it and wait the flash end.
These ROMs can't be used to update or downgrade your phone but just to restore your phone.
If the rom seems doesn't start go in recovery stock and follow this guideline: English -> Wipe data and cache -> Erase everything.
If you want to rebrand your phone from HydrogenOS to OxygenOS you can follow this guide: Rebrand Guide
If you want you can use also my tool to flash Factory Images, unlock bootloader, flash twrp or to understand if the device is recognized: https://toolaio.tk/
If you got some problems like write error or no partition, check this: https://forum.xda-developers.com/showpost.php?p=76658555&postcount=34
DONATE LINK
If you want to support this and others my projects please consider making a donation, thanks.
​

Branded devices is for example a Chinese version with HydrogenOS to which OxigenOS has been installed? If so, how can a branded device be recovered?
Thanks

Hi guys, i'm here again to ask for your support, actually with android 10 Google introduced a lot of changing, from dynamic partitions to the new keymaster 4 encryption/decryption. Teamwin is working hard to update TWRP but they will still take some time. Currently some things already work but there are difficulties in bringing them to the OnePlus 8/8 Pro, for example decryption already works but creates some problems on the OnePlus devices. That's why I decided to create a Paypal moneybox to be able to bring you the latest updates in the shortest time possible. As I have previously done, I assure you of a support of at least 2 years (within the limits of my possibilities). In addition to the TWRP I will improve the fastboot roms and add OnePlus 8/8 Pro to my TOOL ALL IN ONE (and maybe I will also bring the RevengeOS). By getting hold of a OnePlus 8 or 8 Pro I will also be able to improve the TWRP for OnePlus 7T and 7T Pro.
OnePlus 8/8 Pro PayPal MoneyBox: https://www.paypal.com/pools/c/8pfrIOL3Qa
If you are unable to participate in the PayPal moneybox, you can make a normal donation (perhaps specifying that it is for the moneybox), however all private donations that I will receive for this or other projects will be included in the moneybox.
Private PayPal Donations: https://www.paypal.me/MauronofrioTool

Why after flash it, it boot up to Qualcomm crashdump mode and how to fix?

sakun-ice said:
Branded devices is for example a Chinese version with HydrogenOS to which OxigenOS has been installed? If so, how can a branded device be recovered?
Thanks
Click to expand...
Click to collapse
I think unbranded devices mean the device bought from T-Mobile or Verizon. Nothing to do with chinese versiion flash oxygenOS, if I'm not wrong.

Can't seem to get this to work. I'm trying to flash a stock rom for my OnePlus 8 after bricking it during a rooting process.
The device' bootloader is obviously unlocked and i can get the phone into Fastboot mode and connected to my PC.
The only issue is when i execute the flash-all.bat file, it can't seem to flash any of the files and gives an error consisting of the message "FAILED (remote: 'Flashing is not allowed for Critical Partitions').
What to do guys? Can anyone help me out.

Does anyone know where to find mobile oneplus 8 5g tmobile from mine is bricked I had same error as post above

KJStar said:
Can't seem to get this to work. I'm trying to flash a stock rom for my OnePlus 8 after bricking it during a rooting process.
The device' bootloader is obviously unlocked and i can get the phone into Fastboot mode and connected to my PC.
The only issue is when i execute the flash-all.bat file, it can't seem to flash any of the files and gives an error consisting of the message "FAILED (remote: 'Flashing is not allowed for Critical Partitions').
What to do guys? Can anyone help me out.
Click to expand...
Click to collapse
Try to flash fastboot rom with "tool all in one),It worked for me.

I needed modem I forgot to fastboot reboot fastboot guy in post 6 that's all you need to do is reboot fastboot then flash all I was looking for different file

Never mind I fixed it by downloading ota and going to system updates in settings because fastboot won't flash to modem right

I am having issues flashing. flashing not allowed on critical partition. please help I tried to use the large address aware program but nothing has changed.

bluemoel said:
I am having issues flashing. flashing not allowed on critical partition. please help I tried to use the large address aware program but nothing has changed.
Click to expand...
Click to collapse
Make sure your on the latest update: 10.5.8

mauronofrio said:
Things are changing with the advent of project treble and seamless updates. OnePlus will no longer release ROMs flashable via recovery (either stock) because is no more needed. The updates will be done on the slot not used for example if you are using slot a the update will be installed on slot b and the slot b will be set as default. If you brick and you are in bootloop how you can restore the rom? You can't with Stock ROM you have, because the zip can be only installed via Update Engine, so what can you do? Flash a stock rom via fastboot. I have extracted all images from the stock zip and i have made a new zip with the Fastboot ROM with a flash-all.bat included. This will work only if your bootloader is unlocked. This will erase all your data and will wipe your internal storage.
HOW TO FLASH
This version is only for not branded devices
Download the zip;
Unpack the zip in a folder;
Reboot the OnePlus 8 in fastboot-bootloader mode (Power and volume + and volume-);
Connect the OnePlus 8 to PC;
Run flash-all.bat flasher you need;
Wait until the process end;
The phone will automatically reboot.
DOWNLOAD
All roms on Sourceforge: https://sourceforge.net/projects/fastbootroms/files/OnePlus 8
BRANDED PHONE
For now branded device are not supported
MANUAL FLASH: Windows - OSX - Linux
If you want to manual flash these roms these are the commands (You need the latest sdk platform tools, you can find it here
Is reccomended to format data or the rom cannot boot:
Code:
fastboot -w
Others Commands to flash a fastboot rom
Code:
fastboot flash aop aop.img
fastboot flash bluetooth bluetooth.img
fastboot flash boot boot.img
fastboot flash dsp dsp.img
fastboot flash dtbo dtbo.img
fastboot flash LOGO LOGO.img
fastboot flash modem modem.img
fastboot flash oem_stanvbk oem_stanvbk.img
fastboot flash qupfw qupfw.img
fastboot flash storsec storsec.img
fastboot flash multiimgoem multiimgoem.img
fastboot flash uefisecapp uefisecapp.img
fastboot flash recovery recovery.img
fastboot --disable-verity flash vbmeta vbmeta.img
fastboot --disable-verity flash vbmeta_system vbmeta_system.img
fastboot flash opproduct opproduct.img
fastboot reboot fastboot
fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot flash product product.img
fastboot reboot
REMEMBER
"Invalid sparce file format at header magic" is not an error, you need to wait a bit when you see that string, just wait.
If the device automatically reboot in Stock Recovery mode don't reboot it and wait the flash end.
These ROMs can't be used to update or downgrade your phone but just to restore your phone.
If the rom seems doesn't start go in recovery stock and follow this guideline: English -> Wipe data and cache -> Erase everything.
If you want to rebrand your phone from HydrogenOS to OxygenOS you can follow this guide: Rebrand Guide
If you want you can use also my tool to flash Factory Images, unlock bootloader, flash twrp or to understand if the device is recognized: https://toolaio.tk/
If you got some problems like write error or no partition, check this: https://forum.xda-developers.com/showpost.php?p=76658555&postcount=34
DONATE LINK
If you want to support this and others my projects please consider making a donation, thanks.
​
Click to expand...
Click to collapse
Hi, do you know if patching with local update a Oxygen OS Europe release from a Global release may cause problems to the fingerprint? I have a IN2010 with the Global OxygenOS but I would like to switch to the European versione becasue I live in Italy like you

Why not flash reserve.img?

nnyd said:
Why not flash reserve.img?
Click to expand...
Click to collapse
Because it is placed in userdata and not in a dedicated partition

I have an issue trying to flash on fastboot. It's says I can't flash on critical partitions. Yes I know alot of people are saying that but what I haven't seen is this:
This is my problem:
Fastboot get device-info
(Bootloader) device unlocked:true
(Bootloader) device critical unlock: false
(Bootloader) charger screen enabled: true
I have already tried "fastboot flashing unlock_critical"
It says bootloader already unlocked. I then re lock bootloader which I know is not a good idea( reflash stock with msm tool) and it lock then I try unlock critical command again and it still says device critical unlock: false

i need help please ..
i tried this method not the latest version i tried the 10.5.4 global
so it gave me all failed and error to foramt and others
then it restart my phone to show me crashdump
what should i do ?
should i use latest version ?
i hope you replay fast .. thank you

Alucardo1 said:
i tried this method not the latest version i tried the 10.5.4 global
so it gave me all failed and error to foramt and others
then it restart my phone to show me crashdump
what should i do ?
should i use latest version ?
i hope you replay fast .. thank you
Click to expand...
Click to collapse
Try again with 10.5.7. When it reboot to recovery, let it continue to run till it reboots on its own.

Unbrick from fastboot method
I hope I can help someone since I spent the whole night trying various methods to unbrick my Oneplus 8 and only this one worked for me JUST FOR INTERNATIONAL VERSION
You must have the drivers installed (Adb & Fastboot)
You must have your phone with the bootloader unlocked
1.- Download the file
2.-Unzip it
inside you will find Flash-all.bat
3.-Enter Fastboot mode
4.-Double click on the Flash-all.bat command
5.-It will direct you to the recovery, select the English language and restart in fastboot mode so that the process continues, wait for it to finish flashing everything and ready, the phone restarts on the latest version
https://mega.nz/folder/8tpUSSrR#7wH4NX_ccr2a6Ub8LXpsEA
Donate Link to support my work
https://paypal.me/pakomorales?locale.x=es_XC

cannot relock bootloader on oneplus 8
bro thanks for fastboot room for oneplus 8,i flash your fastboot room 10.5.9 everthing ok,but i relocked to boot loader it the phone be correpted. what should i do ,
please help me.