Ok so i tried rooting my snapdragon G950U S8 well it failed and now i cant boot into system cause all i get is the blue screen with installing system update then no command I then boot into download mode and then use odin with 4 files from updato.com I looked up my phone is USA CSPIRE ACG its got the bootloader 2.......Well it cant get it to work. I keep getting Complete(Write) Operation Failed while on the phone i get SW REV CHECK FAIL : (ABL)Fused 4 > Binary 2
I just need to know what I need to do to get my phone back to working.
If you need anymore information I will be glad to give it.
Related
Hi,
I am really new to this and basically stuck without a phone (noob move I know).
I wanted to upgrade to Kitkat and downloaded N9005XXUENB4_N9005DBTENB1_DBT and odin v3.09.
I started up in download mode and got the following failure:
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
How do I restore so I can even just start my phone. Currently I only get the error saying upgrade failed- connect to Kies. But I again being noob never setup kies backup before.
PLEASE PLEASE help.
Where do I get a stock firmware recovery to reflash
antz69 said:
Hi,
I am really new to this and basically stuck without a phone (noob move I know).
I wanted to upgrade to Kitkat and downloaded N9005XXUENB4_N9005DBTENB1_DBT and odin v3.09.
I started up in download mode and got the following failure:
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
How do I restore so I can even just start my phone. Currently I only get the error saying upgrade failed- connect to Kies. But I again being noob never setup kies backup before.
PLEASE PLEASE help.
Where do I get a stock firmware recovery to reflash
Click to expand...
Click to collapse
Flash NB4 again but this time also flash this pit file and check repartition. If phone is getting stuck at samsung logo upon reboot, boot to recovery and factory reset.
Well first what your model, this is n9005
is your download complete, did you have the drivers installed (kies installed but you need to kill it - in order to odin to work without issues)
go through this, page, it has detail procedure in odin flash of the same ROM.
http://androidromupdate.com/tag/n9005xxuenb4_n9005dbtenb1_dbt-zip/
@antz69 , hope that helps.
well i did a update with odin to get root back cuz i lost it due to knox and it said firmware upgrade encountered an issue. now it wont let me boot up the when i download the stock l720t firmware from sammobile odin wont get passed the write part with out saying Complete(Write) operation failed. what am i supposed to do now? ive used 3 diffrent odins and reinstalled my drivers. i just dont know plz help..
also it says odin mode write protect enabled and bust mode enabled
ok i got it the problem was i was putting it in to download mode and all i had to do was keep it on the screen that said there was a problem when i did the firmware update
Hello guys, I've tried to flash a CWM recovery on my SM-N9005 via Odin v3.07 and I always have a problem with that.. I run my phone in download mode, connect it to my laptop, and try to flash but this is the result in Odin log:
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
And result on my phone in download mode is:
Error: Secure Check Fail : aboot
I had the same problem when I try to root this phone with Odin, I dont know what to do with that and I'm thinking that you can help me
I know that my English is not very good but you have to understand that because I'm from Poland and I'm still learning it
When you are in Odin do you see that it actually shows that there's a successful connection? I mean look at the white status box at left hand side, does it say 'connected'?
ithehappy said:
When you are in Odin do you see that it actually shows that there's a successful connection? I mean look at the white status box at left hand side, does it say 'connected'?
Click to expand...
Click to collapse
Yes it is, maybe I should add thay I can Flash brand stock on that phone, I have that problem when I try to download any Type of recovery / root files and other like this.
I don't know if I made a minor mistake or a major mistake. I was trying to flash U Firmware and downloaded and tried to flash G935UUEU2APEH_CL8086184_QB9638174_REV02_user_low_ship_MULTI_CERT. I can't tell you for sure what it said because the post I was reading said if it fails, it's no big deal, try again a few times. After a few failed attempts, I realized there were tons of different versions.
I finally downloaded what I believe is the the correct one, G935VVRU4API3_CL8875708_QB11198937_REV02_user_low_ship_MULTI_CERT, but when I went to flash it, in red at the top it says
volume size is too big 1152000 < 1369600
Odin : invalid ext4 image
and in Odin, the end says
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Ext4)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Is there any fixing this or am I royally screwed? When I restart the phone, a blue screen comes up and says
Software Update Failed
Your device didn't update successfully. Use the Verizon Software Repair Assistant on a computer to repair your device and complete the update. (I don't have a Verizon Software Repair Assistant).
I'll be honest, at this point I just want a functioning phone! haha Thanks for your help!
re: messed up phone
bmccartney2004 said:
I don't know if I made a minor mistake or a major mistake. I was trying to flash U Firmware and downloaded and tried to flash G935UUEU2APEH_CL8086184_QB9638174_REV02_user_low_ship_MULTI_CERT. I can't tell you for sure what it said because the post I was reading said if it fails, it's no big deal, try again a few times. After a few failed attempts, I realized there were tons of different versions.
I finally downloaded what I believe is the the correct one, G935VVRU4API3_CL8875708_QB11198937_REV02_user_low_ship_MULTI_CERT, but when I went to flash it, in red at the top it says
volume size is too big 1152000 < 1369600
Odin : invalid ext4 image
and in Odin, the end says
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Ext4)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Is there any fixing this or am I royally screwed? When I restart the phone, a blue screen comes up and says
Software Update Failed
Your device didn't update successfully. Use the Verizon Software Repair Assistant on a computer to repair your device and complete the update. (I don't have a Verizon Software Repair Assistant).
I'll be honest, at this point I just want a functioning phone! haha Thanks for your help!
Click to expand...
Click to collapse
You need to use Odin3 to flash the proper official samsung
firmware for your s7 or s7 edge phone model.
You can find and download the firmware from http://sammobile.com
After successfully flashing the phone using Odin3 your phone will be
just like new.
The mistake you made is a very small one, flashing the official firmware
takes less than 15 minutes.
Good luck, have a great day!
.
This happened to me on my galaxy tab s2, same error in Odin and same result. Good news is it is fixable. I have no idea why the error happened, I just tried a different firmware, and the second one worked.
Hi, today I factory reseted my Samsung Galaxy Grand Prime [SM-G531M] from the settings app using the official rom. The thing is, when I booted the phone, it didn't show up the setup page, it just kept restarting, and every time that it booted up, it would show up "Custom binary blocked by FRP". I'm now trying to use Odin to fix this, but I don't know what to do. The process already failed two times and failed, showing this in the log: " <ID:0/004> system.img
<ID:0/004> __XmitData_Write
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)"
When I boot my phone in download mode it now shos "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again".
I already tried kies but it never finished connecting to the phone.
I've tried 2 cables, both the original and another and tried 3 different USB 2.0 ports. I've also installed the newest drivers.
I would really appreciate if someone could help me.
Edit: I had previouslly installed TWRP and factory reseted my phone successfully more than once.