Hi,
I am really new to this and basically stuck without a phone (noob move I know).
I wanted to upgrade to Kitkat and downloaded N9005XXUENB4_N9005DBTENB1_DBT and odin v3.09.
I started up in download mode and got the following failure:
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
How do I restore so I can even just start my phone. Currently I only get the error saying upgrade failed- connect to Kies. But I again being noob never setup kies backup before.
PLEASE PLEASE help.
Where do I get a stock firmware recovery to reflash
antz69 said:
Hi,
I am really new to this and basically stuck without a phone (noob move I know).
I wanted to upgrade to Kitkat and downloaded N9005XXUENB4_N9005DBTENB1_DBT and odin v3.09.
I started up in download mode and got the following failure:
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
How do I restore so I can even just start my phone. Currently I only get the error saying upgrade failed- connect to Kies. But I again being noob never setup kies backup before.
PLEASE PLEASE help.
Where do I get a stock firmware recovery to reflash
Click to expand...
Click to collapse
Flash NB4 again but this time also flash this pit file and check repartition. If phone is getting stuck at samsung logo upon reboot, boot to recovery and factory reset.
Well first what your model, this is n9005
is your download complete, did you have the drivers installed (kies installed but you need to kill it - in order to odin to work without issues)
go through this, page, it has detail procedure in odin flash of the same ROM.
http://androidromupdate.com/tag/n9005xxuenb4_n9005dbtenb1_dbt-zip/
@antz69 , hope that helps.
Related
Hi guys I'm having problems trying to root my note 3, in fact i can't flash anything with odin.
It is a n900w8 from Telcel, with 4.4.2 stock rom.
I tried flashing to root it and tried to flash a custom recovery and nothing.
this is what odin shows:
<ID:0/009> recovery.img
<ID:0/009> NAND Write Start!!
<ID:0/009> FAIL! (Auth)
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and in the phone it shows in red letters : Secure check fail : recovery
I already checked the reactivation lock, and it isn´t checked.
Do you have an idea of what could it be?
If you need another info pleas tell me, i would appreciate any help thanks
1. Reinstall the Samsung's drivers.
2. Try other USB cable/port.
3. Take a look if you are flashing the latest firmware for your device. Latest is: HERE.
Joku1981 said:
1. Reinstall the Samsung's drivers.
2. Try other USB cable/port.
3. Take a look if you are flashing the latest firmware for your device. Latest is: .
Click to expand...
Click to collapse
thanks for the answer but i didn´t work , I can flash that rom but only that. I tried to flash the root and the same error.
Hi! I have problem
I flashed official LOLLIPOP for N9005 from Poland and everything went okay.
Then I stupidly tried to install TWRP via Odin and it seemed it caused an issue. It must have been wrong TWRP.
Now everytime I want to turn on, the message "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
I tried to flash once again LOLLIPOP ROM but there is an error:
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Any idea what can I do?
So I decided to flash Android 5.0 firmware from sammobile, I followed the instructions, but red FAIL came up with:
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I guess its a soft brick ? *panic*
Please what should I do now?!
Thanks in advice for reply!
Can you turn on the phone?
Sent from Galaxy Note series
Solved
Ok,I found the soulution. The thing was I flashed a branded firmware. Now the phone is working
I don't know if I made a minor mistake or a major mistake. I was trying to flash U Firmware and downloaded and tried to flash G935UUEU2APEH_CL8086184_QB9638174_REV02_user_low_ship_MULTI_CERT. I can't tell you for sure what it said because the post I was reading said if it fails, it's no big deal, try again a few times. After a few failed attempts, I realized there were tons of different versions.
I finally downloaded what I believe is the the correct one, G935VVRU4API3_CL8875708_QB11198937_REV02_user_low_ship_MULTI_CERT, but when I went to flash it, in red at the top it says
volume size is too big 1152000 < 1369600
Odin : invalid ext4 image
and in Odin, the end says
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Ext4)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Is there any fixing this or am I royally screwed? When I restart the phone, a blue screen comes up and says
Software Update Failed
Your device didn't update successfully. Use the Verizon Software Repair Assistant on a computer to repair your device and complete the update. (I don't have a Verizon Software Repair Assistant).
I'll be honest, at this point I just want a functioning phone! haha Thanks for your help!
re: messed up phone
bmccartney2004 said:
I don't know if I made a minor mistake or a major mistake. I was trying to flash U Firmware and downloaded and tried to flash G935UUEU2APEH_CL8086184_QB9638174_REV02_user_low_ship_MULTI_CERT. I can't tell you for sure what it said because the post I was reading said if it fails, it's no big deal, try again a few times. After a few failed attempts, I realized there were tons of different versions.
I finally downloaded what I believe is the the correct one, G935VVRU4API3_CL8875708_QB11198937_REV02_user_low_ship_MULTI_CERT, but when I went to flash it, in red at the top it says
volume size is too big 1152000 < 1369600
Odin : invalid ext4 image
and in Odin, the end says
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Ext4)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Is there any fixing this or am I royally screwed? When I restart the phone, a blue screen comes up and says
Software Update Failed
Your device didn't update successfully. Use the Verizon Software Repair Assistant on a computer to repair your device and complete the update. (I don't have a Verizon Software Repair Assistant).
I'll be honest, at this point I just want a functioning phone! haha Thanks for your help!
Click to expand...
Click to collapse
You need to use Odin3 to flash the proper official samsung
firmware for your s7 or s7 edge phone model.
You can find and download the firmware from http://sammobile.com
After successfully flashing the phone using Odin3 your phone will be
just like new.
The mistake you made is a very small one, flashing the official firmware
takes less than 15 minutes.
Good luck, have a great day!
.
This happened to me on my galaxy tab s2, same error in Odin and same result. Good news is it is fixable. I have no idea why the error happened, I just tried a different firmware, and the second one worked.
Hi, today I factory reseted my Samsung Galaxy Grand Prime [SM-G531M] from the settings app using the official rom. The thing is, when I booted the phone, it didn't show up the setup page, it just kept restarting, and every time that it booted up, it would show up "Custom binary blocked by FRP". I'm now trying to use Odin to fix this, but I don't know what to do. The process already failed two times and failed, showing this in the log: " <ID:0/004> system.img
<ID:0/004> __XmitData_Write
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)"
When I boot my phone in download mode it now shos "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again".
I already tried kies but it never finished connecting to the phone.
I've tried 2 cables, both the original and another and tried 3 different USB 2.0 ports. I've also installed the newest drivers.
I would really appreciate if someone could help me.
Edit: I had previouslly installed TWRP and factory reseted my phone successfully more than once.