Database Users

[UPDATED] JPY XSA (Australia Unbranded) Firmware

Hi All,
I have created a JPX/JPY rom with XSA (Australia Unbranded) CSC. That means that if you flash this your CSC will be XSA!
I am currently running this on Unbranded Virgin Australia Mobile. It has APN settings for all Australian carriers. Kies shows Product code as "GT-I9000HKAXSA".
JPX:
http://www.multiupload.com/YOG082M70Q
JPY [Updated with Modem]:
http://www.multiupload.com/HISMWOJ7KI
DO NOT re-partition with this firmware! If you have problems on first boot "E:Can't mount \dev\block\st110" then Flash with JPU (3 files) and repartition with 512.pit then re-flash this JPX/JPY WITHOUT repartition.
JPX:
PDA: I9000XXJPX
PHONE: I9000XXJPX
CSC: I9000XSAJP4
JPY
PDA: I9000XXJPY
PHONE: I9000XXJPY
CSC: I9000XSAJP4
Both Firmware's includes the Navigon Navigation Software!
http://www.multiupload.com/P7GFPHWC57
If I have helped you please click on the "Thanks" Button.

is this for an i9000t ? if so does it stil have 850mhz 3g service with the jpx modem (doubt it) or dontyou use that freq. in australia?

lgkahn said:
is this for an i9000t ? if so does it stil have 850mhz 3g service with the jpx modem (doubt it) or dontyou use that freq. in australia?
Click to expand...
Click to collapse
It *should* work. But I have not tested it.

no no 850 fw has a cool navigon app if we can get a update

lgkahn said:
is this for an i9000t ? if so does it stil have 850mhz 3g service with the jpx modem (doubt it) or dontyou use that freq. in australia?
Click to expand...
Click to collapse
No, this firmware is based on 900/1900/2100 MHz. Unbranded Australian Galaxy S is a 900/1900/2100 MHz version too.
Only one carrier in Australia uses an 850 MHz 3G Galaxy S - Telstra. The rest of the carriers are 900/2100 MHz. (Vodafone, Optus, Three, Virgin etc)

tjsooley said:
no no 850 fw has a cool navigon app if we can get a update
Click to expand...
Click to collapse
Yes, This does have the Navigon Software! That comes in the CSC Package
Hence it comes in this JPX XSA Package

ok that is what i thought.. any recommendations on which modem to use (for 850/1900/2100 mhz 3g here in the u.s.) when i custom flash with jpx the jp1 from the i9000t jp2 distribution or the jk3 from the i9000m jk4/jk3 distribution (newer) this is nov 29th vs. nov 18th for jp1
both supposedly are froyo with 850mhz 3g..

I am on the telus modem and the rom screems

Can someone post the updated navigon apk
Sent from my GT-I9000 using XDA App

tjsooley said:
Can someone post the updated navigon apk
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Here is the Navigon APK:
http://www.multiupload.com/P7GFPHWC57
Extracted from XSA CSC JP4

are you talking about Samsung Nav software... if it is you can always download it from Market for free

i have just upgraded from a tytn II to a i9000, so please excuse my ignorant questions....
i have a vodafone branded stock eclair rom (JG3 from memory).
should i flash JPU before attempting to flash JPX?
or can i just go ahead and flash the JPX rom?
cheers
Edit: Just for my own reference... performed a three file flash of JPU and 512.pit (without repartition) then flashed JPY with 512.pit (without repartition) then for some reason rooted with chainfires JPX busybox-1.17.....

not from my sim id what is your sim market id?

tjsooley said:
not from my sim id what is your sim market id?
Click to expand...
Click to collapse
Don't know.. It's only available for Android 2.2 so if you still using eclair it won't show up on market. I'm using Darkys v6 latest ROM based on JPX..
here is the proof.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

yes but it shows up in the market based on your market sim id.
download market enabler and post the id that is the default one the we will be able to get the software.

ALL use market enabler and fake telstra AU and search for mobile navigator.
I am in the usa and testing the gps to see if it has free maps for other places than down under.

tjsooley said:
yes but it shows up in the market based on your market sim id.
download market enabler and post the id that is the default one the we will be able to get the software.
Click to expand...
Click to collapse
it's 50503

kamalmawa said:
it's 50503
Click to expand...
Click to collapse
thanks the software rocks but no maps for out side au and nz

I'm running XSAJP4 on 9000T from Telstra. I get 'H' on my status bar and it runs fine. The only difference I can see is the model changed to 9000 instead of 9000T. When I click on select Band I only get XSA and no other choice. NextG SIM.
Which brings me to another question, the first post says CSC: XAJP4 . did you mean XSAJP4? the same one from 2.2?

TTLExpired said:
I'm running XSAJP4 on 9000T from Telstra. I get 'H' on my status bar and it runs fine. The only difference I can see is the model changed to 9000 instead of 9000T. When I click on select Band I only get XSA and no other choice. NextG SIM.
Which brings me to another question, the first post says CSC: XAJP4 . did you mean XSAJP4? the same one from 2.2?
Click to expand...
Click to collapse
Yes, it is the same one from 2.2 JP4

Galaxy S4 i9505 no 4G/LTE Orange CH

Sorry for my bad english but i am swiss. i have a question. orange ch have startet 4g and my s4 dont find the network. the problem is on alls s4. how i can activate 4g? i dont want to wait an update from orange. my s4 is rootet and have omega v 3.0 rom with adam kernel. the htc one from my neighbor have the 4g on orange network. what i can make? thx for replys

The problem is the CSC file.
Go to Sammobile, search for your phone in firmware section. Check the latest CSC available for your phone. And then, start searching in these forums for your right one. Or use the app from the market (CSC changer S2/S3... something) and 'activate' the right CSC. (remember, it is OR - I don't advice to use both). You will probably need to make a factory reset (full wipe from recovery)..

thx for reply. sammobile dont have the s4 i9505 in the firmware section and csc changer too.
EDit. i have installed csc changer. my s4 have BTU but swiss is ATU and i dont find it in this app

UPDATE: i have installed the original rom with swiss csc but i dont have 4g. orange say samsung must make an update but i dont want wait. i have buyed the s4 only for 4g and android

geiti94 said:
UPDATE: i have installed the original rom with swiss csc but i dont have 4g. orange say samsung must make an update but i dont want wait. i have buyed the s4 only for 4g and android
Click to expand...
Click to collapse
did you try talking to your carrier to activate your 4g?

geiti94 said:
UPDATE: i have installed the original rom with swiss csc but i dont have 4g. orange say samsung must make an update but i dont want wait. i have buyed the s4 only for 4g and android
Click to expand...
Click to collapse
Hi I also have orange in Switzerland and tried many different combinations of firmware/modem/csc and didn't get the menu working.
But if you go to service mode with *#0011# -> menu back -> menu key input 1 -> menu back -> lte -> pref mode set -> change to gwl and reboot.
You won't get the option in settings but your phone will connect to 4g when available.

izolight said:
Hi I also have orange in Switzerland and tried many different combinations of firmware/modem/csc and didn't get the menu working.
But if you go to service mode with *#0011# -> menu back -> menu key input 1 -> menu back -> lte -> pref mode set -> change to gwl and reboot.
You won't get the option in settings but your phone will connect to 4g when available.
Click to expand...
Click to collapse
thx. this works, but i have found strings in the csc customer.xml. i wil try to enable 4g with the menu. i have the htc one from neighbor here so i can copi the orange settings. when it works i upload the file

geiti94 said:
thx. this works, but i have found strings in the csc customer.xml. i wil try to enable 4g with the menu. i have the htc one from neighbor here so i can copi the orange settings. when it works i upload the file
Click to expand...
Click to collapse
By looking through the sec_csc found in the cache.img.ext4 in a csc.tar.md5 i found a file lteon_netlist.xml in \system\csc\common\system\etc. The swisscom entry is:
<whiteLists numeric="22801" ltestate="PS/CSFB" operator="Swisscom" country="Switzerland" defaultMode="GWL"/>
so we would have to add this for orange I guess
<whiteLists numeric="22803" ltestate="PS/CSFB" operator="Orange CH" country="Switzerland" defaultMode="GWL"/>
UPDATE: by looking through the csc of this firmware I9505XXUAME2_I9505MEOAME3_MEO which appears to be a portuguese one but with csc ME3 and whitelist date <!-- WHITELIST_20130520--> I found the exact entry I mentioned to add. I will try a bit with that later.

izolight said:
By looking through the sec_csc found in the cache.img.ext4 in a csc.tar.md5 i found a file lteon_netlist.xml in \system\csc\common\system\etc. The swisscom entry is:
<whiteLists numeric="22801" ltestate="PS/CSFB" operator="Swisscom" country="Switzerland" defaultMode="GWL"/>
so we would have to add this for orange I guess
<whiteLists numeric="22803" ltestate="PS/CSFB" operator="Orange CH" country="Switzerland" defaultMode="GWL"/>
Click to expand...
Click to collapse
good idea! i wil test it and i wil report
EDIT. my galaxy s4 it booting. i editet a file and i wont boot but i have reflashed omega v3 and it is booting

i am flashing I9505XXUAME2_I9505MEOAME3_MEO. Who does 4g I'll report it
EDIT: 4G/LTE work whit this firmware!!!!! My queston is how i can switch the sec_csc from the both roms?

geiti94 said:
i am flashing I9505XXUAME2_I9505MEOAME3_MEO. Who does 4g I'll report it
EDIT: 4G/LTE work whit this firmware!!!!! My queston is how i can switch the sec_csc from the both roms?
Click to expand...
Click to collapse
I flashed this firmware but didn't get the option, so I flashed back to the one I had before (NEE), both times without wipe though. Still didn't have the option. But today suddenly it was there.

izolight said:
I flashed this firmware but didn't get the option, so I flashed back to the one I had before (NEE), both times without wipe though. Still didn't have the option. But today suddenly it was there.
Click to expand...
Click to collapse
So izolight, which ROM and kernel are you using to get the Orange.ch 4G activated? I am in Basel but still only see H+ and 3G
Thanks for your help.

TShill7 said:
So izolight, which ROM and kernel are you using to get the Orange.ch 4G activated? I am in Basel but still only see H+ and 3G
Thanks for your help.
Click to expand...
Click to collapse
I am using stock NEE
I9505XXUAME2_I9505OXXAMDB_I9505XXUAME2
although I activated the GWL option in service mode.
Working in Bern.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

izolight said:
I am using stock NEE
I9505XXUAME2_I9505OXXAMDB_I9505XXUAME2
although I activated the GWL option in service mode.
Working in Bern.
Click to expand...
Click to collapse
Thanks! Stock NEE? Nordic countries?? Really? If I flash this will I be able to flash Omega 3.0 over the top?
I flashed with a Swisscom SWC firmware before Omega - maybe this is my problem. I will give the service mode a try first though. Thanks again. :good:

TShill7 said:
Thanks! Stock NEE? Nordic countries?? Really? If I flash this will I be able to flash Omega 3.0 over the top?
I flashed with a Swisscom SWC firmware before Omega - maybe this is my problem. I will give the service mode a try first though. Thanks again. :good:
Click to expand...
Click to collapse
I just noticed there is a new firmware for Switzerland
http://www.hotfile.com/dl/225141908/dacbc8c/I9505XXUAME2_I9505AUTAME2_AUT.zip.html
It seems this has AME2 as csc so the setting of GWL in service mode won't be necessary as Orange is already on the lte whitelist on this one.
I would try this.

izolight said:
Hi I also have orange in Switzerland and tried many different combinations of firmware/modem/csc and didn't get the menu working.
But if you go to service mode with *#0011# -> menu back -> menu key input 1 -> menu back -> lte -> pref mode set -> change to gwl and reboot.
You won't get the option in settings but your phone will connect to 4g when available.
Click to expand...
Click to collapse
Do you know what LTE Band Orange CH is using?
I'm trying to connect to it with my SGH-M919 which supports LTE: Bands 1/2/4/5/7/17

ksujace said:
Do you know what LTE Band Orange CH is using?
I'm trying to connect to it with my SGH-M919 which supports LTE: Bands 1/2/4/5/7/17
Click to expand...
Click to collapse
Orange uses Lte band 3 (1800).

The latest update already fix this problem. I got my 4g in Geneva

ken8826763 said:
The latest update already fix this problem. I got my 4g in Geneva
Click to expand...
Click to collapse
for what version you updated?

sharaz191 said:
for what version you updated?
Click to expand...
Click to collapse
Well... it's from the OTA update.

[Q] Sm-G900F without LTE

Hi
I have Sm-G900F with latest firmware NOT root original ROM in the network I only have GSM or WCDMA how can i get LTE option?

the-scorpion said:
Hi
I have Sm-G900F with latest firmware NOT root original ROM in the network I only have GSM or WCDMA how can i get LTE option?
Click to expand...
Click to collapse
Do the S5 G900F supported bands/frequencies match your providers LTE b/f?

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Yes in the option of mobile network i do not have option of LTE

the-scorpion said:
Yes in the option of mobile network i do not have option of LTE
Click to expand...
Click to collapse
Whats your providers frequency and where do you live?

gee2012 said:
Whats your providers frequency and where do you live?
Click to expand...
Click to collapse
it's not about Provider in the device i Have no option of LTE

the-scorpion said:
it's not about Provider in the device i Have no option of LTE
Click to expand...
Click to collapse
Then your provider uses a band/frequency which is probably not supported by the S5.

No you got it all wrong if i have in the smartphone option of LTE that are enable and not getting lte so than you right but in the device i do not have the option of LTE !

the-scorpion said:
No you got it all wrong if i have in the smartphone option of LTE that are enable and not getting lte so than you right but in the device i do not have the option of LTE !
Click to expand...
Click to collapse
This is what i am trying to find here ...http://forum.xda-developers.com/galaxy-s5/help/samsung-galaxy-s5-g900f-lte-t2840070
do you confirm on samsung wesite that your model supports LTE or not.

This my Device
[IMG="This my Device"]http://imagizer.imageshack.us/v2/280x200q90/536/flIkoj.png/IMG]
itechengine said:
This is what i am trying to find here ...http://forum.xda-developers.com/galaxy-s5/help/samsung-galaxy-s5-g900f-lte-t2840070
do you confirm on samsung wesite that your model supports LTE or not.
Click to expand...
Click to collapse

the-scorpion said:
Click to expand...
Click to collapse
that image is so small to see anything - 150x100q90

itechengine said:
that image is so small to see anything - 150x100q90
Click to expand...
Click to collapse
Sorry, this image are better

the-scorpion said:
Sorry, this image are better
Click to expand...
Click to collapse
Mate there is no option to activate LTE, its your provider who has to provide you the key (i.e convert the signals you receive to the band/frequency that of a 4G).
Contact your provider and ask them to activate 4G for your connection. I had to do this procedure for mine too.

You wouldn't expect to see LTE options if your current carrier doesn't support LTE. Can you provide a link to confirm that your carrier is using LTE?
The sm-g900f handset itself supports a set of LTE bands. Possibly your carrier firmware has disabled LTE if they don't use LTE. Again we need you to tell us which carrier the phone was originally sold through and what carrier you are currently using the phone on.
Or just reflash to another 900F carrier firmware, choosing a carrier that is known to use LTE. You should do a search and find the appropriate PIT file for the new carrier and flash that concurrently with the firmware.
Alternately, do a search to find the threads that explain how to use service mode to check your LTE band preferences.
.

fffft said:
You wouldn't expect to see LTE options if your current carrier doesn't support LTE. Can you provide a link to confirm that your carrier is using LTE?
The sm-g900f handset itself supports a set of LTE bands. Possibly your carrier firmware has disabled LTE if they don't use LTE. Again we need you to tell us which carrier the phone was originally sold through and what carrier you are currently using the phone on.
Or just reflash to another 900F carrier firmware, choosing a carrier that is known to use LTE. You should do a search and find the appropriate PIT file for the new carrier and flash that concurrently with the firmware.
Alternately, do a search to find the threads that explain how to use service mode to check your LTE band preferences.
.
Click to expand...
Click to collapse
My provider support LTE because I have NEXUS 5 that WORK on LTE if i insert the same sim card I think that ROM that i have did not support LTE... i search and see that the deceive have Hong kong G900FZHU1ANE3 KitKat rom

Then try a different ROM.
Good luck
.

fffft said:
Then try a different ROM.
Good luck
.
Click to expand...
Click to collapse
YES but i want to avoid installing new rom because it's cancel warranty and i seek other solution if it exist...

This is not problem in your network your network provider not in the list of Samsung lte net list in you have a At&t sim try that in your device lte option will show automatically
If you want fix the issue for your network please contact with me through the pm
Sent from my SM-N7505 using XDA Free mobile app

Thank's the problem was solved I receive firmware update that install VOLTE and then Appeared LTE option. so i was right that was the problem of firmware

the-scorpion said:
Thank's the problem was solved I receive firmware update that install VOLTE and then Appeared LTE option. so i was right that was the problem of firmware
Click to expand...
Click to collapse
I'm having a similar problem with my S5 G-900I.
Android version: 4.4.2.
baseband version: G900IZTU1ANE2.
Kerenel version: 3.4.0-1630870 [email protected] #1 Sat May 17 00:37:29 KST 2014
build number: KOT49H.G900IZTU1ANE3.
Can you tell me how did you get the firmware update?
Thanks,
Ran

Hi,
ROOT ONLY!
I wonder if the note 3 fix will work with S5?
backup your device before...
2 methods:
http://smokeys.wordpress.com/2014/04/06/how-to-enable-lte4g-on-samsung-galaxy-note-3-sm-n9005/
http://droidviews.com/wp-content/uploads/2013/05/fix-file-permission-root-browser.jpg
Be sure permissions of persist.radio.lteon are set to rw and then to “true” inside this file, after altering the file save the file and make it read-only.
Reboot your phone, now you will see and be able to pick the option “LTE/WCDMA/GSM (auto connect)” in Network Mode menu
Important: before altering ANY file on your phone be sure you have a copy of the original, unaltered file!!!
I even found: find the file with this EXACT name 'persist.radio.lteon' and delete it.
Becareful with this i perfer to chance it name & loction not delete it.. (onlt if this first meton didn't work...)
Other methods:
http://forums.androidcentral.com/htc-one-m8/381464-turn-off-lte-t.html#post3586830
=
Anyone have all MSL number for all S5? anyone has SPC Utility.apk ?
http://s4gru.com/index.php?/topic/1961-network-visionlte-cincinnati-market/?p=307815
=
http://forum.xda-developers.com/showpost.php?p=53591425&postcount=9
=
http://forum.xda-developers.com/showthread.php?t=2724464
can anyone can confirm all of this?
and tell me what help you and which model & LTE Service Provider you have?

S7 edge 935F model. No service.

Hi there,
The phone worked fine a month but after an firmware update. I am getting "no service" permenantly.
Tried almost everything.
- mobile networks in setting finds no networks.
- tried a different sims (including a european prepaid sim from ireland)
- factory reset
- tried downgrade to the older rom (EGY oldest firmware) nothing works and even the latest UK(BTU) firmware
I am located in the US (cricket wireless). I believe the phone was the EGY origin.
Anyone else having or seen a solution to this issue would be greatly appriecated.
I think it's something with the region lock. This is very frustrating as first experience with an andriod phone.
Cheers.

chenmenis said:
Hi there,
The phone worked fine a month but after an firmware update. I am getting "no service" permenantly.
Tried almost everything.
- mobile networks in setting finds no networks.
- tried a different sims (including a european prepaid sim from ireland)
- factory reset
- tried downgrade to the older rom (EGY oldest firmware) nothing works and even the latest UK(BTU) firmware
I am located in the US (cricket wireless). I believe the phone was the EGY origin.
Anyone else having or seen a solution to this issue would be greatly appriecated.
I think it's something with the region lock. This is very frustrating as first experience with an andriod phone.
Cheers.
Click to expand...
Click to collapse
Did you check your imei# to make sure it's still there.... About device/status /imei info.... Is it correct?
Galaxy S7 edge

Ye first things first is to check if the IMEI is still showing
Sent from my SM-G935F using Tapatalk

Yes I did Imei is valid

chenmenis said:
Yes I did Imei is valid
Click to expand...
Click to collapse
Install this APP and add screenshots of all settings.

Joku1981 said:
Install this APP and add screenshots of all settings.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-G935F using XDA-Developers mobile app

I flashed with UK BTU firmware with odin it was orginally an EGY origin I believe.
chenmenis said:
View attachment 3736577View attachment 3736578View attachment 3736579View attachment 3736580View attachment 3736581
Sent from my SM-G935F using XDA-Developers mobile app
Click to expand...
Click to collapse

Hmm. Don't know what it isn't working. Should work based on what's there. Try turning on and off the device with the sim card removed
Sent from my SM-G935F using Tapatalk

osmosizzz said:
Hmm. Don't know what it isn't working. Should work based on what's there. Try turning on and off the device with the sim card removed
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
yeah tried that. no luck.

It seem you flash the branded firmware and it might lock the network to their carrier. Try flash unbrand firmware like BTU (unbranded UK), DBT(Germany) etc.
Sent from my SM-G935F using Tapatalk

NonXtreme said:
It seem you flash the branded firmware and it might lock the network to their carrier. Try flash unbrand firmware like BTU (unbranded UK), DBT(Germany) etc.
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
I am already using the BTU UK firmware. How do you tell branded?

chenmenis said:
yeah tried that. no luck.
Click to expand...
Click to collapse
"The tab below this sticker explains how and why, albeit in tiny and rather verbose script. Essentially, in order for your unlocked European GS7/Edge to be fully unlocked, you first need to make a total of five minutes worth of phone calls using a European SIM. If you don't do this, and try to use it with a SIM from outside of Europe, it won't connect to the network." Seems that the update restored that script. Source: HERE.

Joku1981 said:
"The tab below this sticker explains how and why, albeit in tiny and rather verbose script. Essentially, in order for your unlocked European GS7/Edge to be fully unlocked, you first need to make a total of five minutes worth of phone calls using a European SIM. If you don't do this, and try to use it with a SIM from outside of Europe, it won't connect to the network." Seems that the update to reset that script. Source: HERE.
Click to expand...
Click to collapse
So I physically need to be in europe do that ? Because I tried with a vodafone sim from ireland from the US but that didn't work.

He said it was working fine before update so surely it shouldnt be because of the sim as an update wouldnt change the EGY product code, i take it that you changed the firmware after it started saying "no service"?
Sent from my SM-G935F using XDA-Developers mobile app

jadaress1 said:
He said it was working fine before update so surely it shouldnt be because of the sim as an update wouldnt change the EGY product code, i take it that you changed the firmware after it started saying "no service"?
Sent from my SM-G935F using XDA-Developers mobile app
Click to expand...
Click to collapse
yes.

First thing id try is going back to the original firmware the phone came with. If it gets signal again you know that the uk firm isnt compatible with where you are. If you were rooted id have suggested finding thr modem firm and flashing it. But dont do that cause if the phone is faulty you will need your warranty in tack to return the phone for repair.
Edit. Another thought is my wife was having problems with her sim. She rang vodafone (her carrier) and they did a sim refresh on her sim remotely which gave her signal again. Maybe try ringing your carrier to see if thats a issue or not.
tapped on #datbombv7EchoeRom

MRDOCA said:
First thing id try is going back to the original firmware the phone came with. If it gets signal again you know that the uk firm isnt compatible with where you are. If you were rooted id have suggested finding thr modem firm and flashing it. But dont do that cause if the phone is faulty you will need your warranty in tack to return the phone for repair.
Edit. Another thought is my wife was having problems with her sim. She rang vodafone (her carrier) and they did a sim refresh on her sim remotely which gave her signal again. Maybe try ringing your carrier to see if thats a issue or not.
tapped on #datbombv7EchoeRom
Click to expand...
Click to collapse
yeah. no luck. I used stock firmware and I tried with multiple sims (different carriers and countries).

Could be faulty. Time to take it back
tapped on #datbombv7EchoeRom

Would a repair shop able to do anything with it?

[ROM][D6653/03][MM-291] VoLTE-Wifi Calling-SuperUser Mod-PreRooted Stock Odex Rom

Index:
Post #1 - All about ROM
Post #2 - Extras - Mods and Faqs
Click to expand...
Click to collapse
Hello friends,
So i am here once again with the new stuff.
Without saying much here i present you Pre-Rooted Pure Odex Stock Rom with VoLTE and Wifi Calling Enabled, SuperUser Mod Inbuilt and Recovery.
Firmware Details- D6653 23.5.A.1.291 (India)
For - D6653 and D6603
Screens:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
--FOLLOW INSTRUCTIONS--
1. Clean Install any rootable stock ftf with flashtool
2. Install NUT's XZDRecovery.
3. Boot in TWRP
4. Wipe cache, dalvik cache and data. (internal storage optional)
5. Install rom and reboot.
NOTE: If you still not getting VolTE Then follow this post #15. You just need to change modem and nothing else.
Download-
Click Me
Feel free to Press Thanks button and press that. Simple.
>>> Number of downloads/clicks compared to Thanks Pressed <<<
For Reliance Jio Users-
PS: VoLTE is working fine even if you are having very low signal and even if your mobile data is off. VoLTE is VoLTE. Enjoy Jio
----------
Credits:
Me
akshay2shah

Extras - Mods - FAQ
Mod1
Mod1 Features:
SuperUser mode
Battery Optimzed - Better Battery Backup with balanced performance
Some controlled GPU setting to improve battery
No OverHeat
Xperia X Lockscreen
Android N Style notification panel and quick toggle panel
Rounded corner recent panel task view
Unlimited quick toggle tiles and 4 tiles in a row
Dynamic nav bar and dropdown status bar (Accords to theme)
Lockscreen Lock icon fully replaced by Real Lock button - (Long press for power menu and one tap for screen off)
Invisible power button at right corner status bar - (Long press for power menu and one tap for lock screen)
Simple Real Stereo Mod with Normal Loud - Clearer
Clear Bass tweak (in headphones)
Deodexed Framework and SystemUI
After installing this mod Xposed can be used - READ FAQ below on how to install
Screens for Mod 1-
Download Mod 1
NOT PERMITTED TO USE IN YOUR ROMS OR IN YOUR ANY MOD FOR PUBLISHING
----
----
FAQs:
VoLTE is enabled but its not working, what to do?
-In case if this issue comes, follow this-
Download and open QuickShortcutMaker from playstore - App Link for easy
Open and open "Customization Selector" and in it click Modem Switcher. Create shortcut.
Open shortcut and and select modem as amss_fsg_leo_volte_base_operator_trials_original.mbn - only this one and nothing else
(If it doesn't open then reboot device and open)
After selecting volte_base_operator_trials, device will reboot.
How to install Xposed Framework?
You must have installed Mod 1
Install Xposed Installer 3.1.1 from here
Download Xposed zip from here only and Save it in your sd card (You need sdk23 arm)
Boot in TWRP and Make Backup [RECOMMENDED]
Install Xposed zip and reboot.
If you get any SystemUI force close error then just go in TWRP and Wipe data, cache, dalvik cach and restore "data" only from the backup you just saved above in step 4.
Reboot and you are done

explain to me what is in a practical sense? thank you
Inviato dal mio D6603 utilizzando Tapatalk

Is there any extra zip for D6603 variant or will the same one work for both???
By the way how's the battery backup compared to other roms???
Thanks for the rom, Jio4G voice was the worst app ever...

khanjunaid said:
Jio4G voice was the worst app ever...
Click to expand...
Click to collapse
Haha..i agree. ..actually that app only works on Jio mobile data only and you know how is it right now. But VoLTE is VoLTE as you know...just needs VoLTE enabled sim thats it.
Yes this will work on D6603 as well. Just follow instructions.
Battery backup is same as stock as its pure stock with some small extra features.

Thanks, downloading now ( jio )

Could I just download and flash in recovery as I'm already on marshmallow

bodomfan said:
Could I just download and flash in recovery as I'm already on marshmallow
Click to expand...
Click to collapse
You can try but VoLTE might not work.
Regards

Volte aint working,enabling and disabling the Volte butoon does nothing,are there any additional steps (d6603)
Changed the modem to reliance jio, but still not working.

khanjunaid said:
Volte aint working,enabling and disabling the Volte butoon does nothing,are there any additional steps (d6603)
Changed the modem to reliance jio, but still not working.
Click to expand...
Click to collapse
Only the steps needed as mentioned in OP.
Changing the modem will not work specially even after selecting reliance jio. Modem should be default one only.
If you did all steps right as instructed in OP then i must remove D6603 from there (May not work on D6603). That i can say for now.
Waiting for your reply
PS: WIll make a patch soon that may work. Instructions for D6603 will be updated that time.
Regards
Mohitash

Volte does not works by default nor by changing the modem

khanjunaid said:
Volte does not works by default nor by changing the modem
Click to expand...
Click to collapse
If you followed all instructions and still not worked. That means this rom is not for D6603 right now.

If the instructions are
Installing the rom and turning the Volte swith,then it ain't working
The only other thing I did was try to swith the modem to reliance jio from the other trick on xda
So the rom in its current state doesn't works for Jio sim on D6603.(are we going to get a patch for D6603,I can test it if you want)
Thanks

PS: VoLTE is working fine even if you are having very low signal and even if your mobile data is off. VoLTE is VoLTE. Enjoy Jio
Hi bro,
I installed d6653 version and followed your steps but still doesnt see VOLTE option as in the screenshots...I am from chennai ,India and have a jio sim in the phone. Can you help me with this ?

It works
Absolutely sorry brother,yesterday I went through all of akshay2shah's post on voltle for z3,there someone posted to change the operator modem, if it doesn't works change it to volte base operator trails & it started working
Again thank you for your rom & sorry for my noobie posts & the inconvinience it caused you

It is working
khanjunaid said:
Absolutely sorry brother,yesterday I went through all of akshay2shah's post on voltle for z3,there someone posted to change the operator modem, if it doesn't works change it to volte base operator trails & it started working
Again thank you for your rom & sorry for my noobie posts & the inconvinience it caused you
Click to expand...
Click to collapse
Yeah, as u suggested, changing the modem to Base trials worked... Thanks.

Good to see you are helping each other.
Actually if you select modem to leo default back again .then...Still you will get VoLTE on this rom. You can try to coinfirm
69+ Downloads but only 4 Thanks
OP Updated

Does the DRM restore mod works on this?
---------- Post added at 04:03 PM ---------- Previous post was at 03:16 PM ----------
khanjunaid said:
Absolutely sorry brother,yesterday I went through all of akshay2shah's post on voltle for z3,there someone posted to change the operator modem, if it doesn't works change it to volte base operator trails & it started working
Again thank you for your rom & sorry for my noobie posts & the inconvinience it caused you
Click to expand...
Click to collapse
Sorry but how do I change base operator? I followed the instructions mentioned but I dont get VOLTE. I have clean flashed FTF and flashed the ROM in TWRP.

@sharukhmohammed DRM restore works perfectly,
For volte you need to change the modem from default to reliance jio one or base trail any one that works for , after that try reverting back to stock base volte one.
Use shortcut maker(not sure about name) from play store- try modem change procedure u can get the procedure somewhere on xda.

Wifi Calling did not work on T-Mobile. Am I missing something or it should work only for India?