Hi All,
I have created a JPX/JPY rom with XSA (Australia Unbranded) CSC. That means that if you flash this your CSC will be XSA!
I am currently running this on Unbranded Virgin Australia Mobile. It has APN settings for all Australian carriers. Kies shows Product code as "GT-I9000HKAXSA".
JPX:
http://www.multiupload.com/YOG082M70Q
JPY [Updated with Modem]:
http://www.multiupload.com/HISMWOJ7KI
DO NOT re-partition with this firmware! If you have problems on first boot "E:Can't mount \dev\block\st110" then Flash with JPU (3 files) and repartition with 512.pit then re-flash this JPX/JPY WITHOUT repartition.
JPX:
PDA: I9000XXJPX
PHONE: I9000XXJPX
CSC: I9000XSAJP4
JPY
PDA: I9000XXJPY
PHONE: I9000XXJPY
CSC: I9000XSAJP4
Both Firmware's includes the Navigon Navigation Software!
http://www.multiupload.com/P7GFPHWC57
If I have helped you please click on the "Thanks" Button.
is this for an i9000t ? if so does it stil have 850mhz 3g service with the jpx modem (doubt it) or dontyou use that freq. in australia?
lgkahn said:
is this for an i9000t ? if so does it stil have 850mhz 3g service with the jpx modem (doubt it) or dontyou use that freq. in australia?
Click to expand...
Click to collapse
It *should* work. But I have not tested it.
no no 850 fw has a cool navigon app if we can get a update
lgkahn said:
is this for an i9000t ? if so does it stil have 850mhz 3g service with the jpx modem (doubt it) or dontyou use that freq. in australia?
Click to expand...
Click to collapse
No, this firmware is based on 900/1900/2100 MHz. Unbranded Australian Galaxy S is a 900/1900/2100 MHz version too.
Only one carrier in Australia uses an 850 MHz 3G Galaxy S - Telstra. The rest of the carriers are 900/2100 MHz. (Vodafone, Optus, Three, Virgin etc)
tjsooley said:
no no 850 fw has a cool navigon app if we can get a update
Click to expand...
Click to collapse
Yes, This does have the Navigon Software! That comes in the CSC Package
Hence it comes in this JPX XSA Package
ok that is what i thought.. any recommendations on which modem to use (for 850/1900/2100 mhz 3g here in the u.s.) when i custom flash with jpx the jp1 from the i9000t jp2 distribution or the jk3 from the i9000m jk4/jk3 distribution (newer) this is nov 29th vs. nov 18th for jp1
both supposedly are froyo with 850mhz 3g..
I am on the telus modem and the rom screems
Can someone post the updated navigon apk
Sent from my GT-I9000 using XDA App
tjsooley said:
Can someone post the updated navigon apk
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Here is the Navigon APK:
http://www.multiupload.com/P7GFPHWC57
Extracted from XSA CSC JP4
are you talking about Samsung Nav software... if it is you can always download it from Market for free
i have just upgraded from a tytn II to a i9000, so please excuse my ignorant questions....
i have a vodafone branded stock eclair rom (JG3 from memory).
should i flash JPU before attempting to flash JPX?
or can i just go ahead and flash the JPX rom?
cheers
Edit: Just for my own reference... performed a three file flash of JPU and 512.pit (without repartition) then flashed JPY with 512.pit (without repartition) then for some reason rooted with chainfires JPX busybox-1.17.....
not from my sim id what is your sim market id?
tjsooley said:
not from my sim id what is your sim market id?
Click to expand...
Click to collapse
Don't know.. It's only available for Android 2.2 so if you still using eclair it won't show up on market. I'm using Darkys v6 latest ROM based on JPX..
here is the proof.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
yes but it shows up in the market based on your market sim id.
download market enabler and post the id that is the default one the we will be able to get the software.
ALL use market enabler and fake telstra AU and search for mobile navigator.
I am in the usa and testing the gps to see if it has free maps for other places than down under.
tjsooley said:
yes but it shows up in the market based on your market sim id.
download market enabler and post the id that is the default one the we will be able to get the software.
Click to expand...
Click to collapse
it's 50503
kamalmawa said:
it's 50503
Click to expand...
Click to collapse
thanks the software rocks but no maps for out side au and nz
I'm running XSAJP4 on 9000T from Telstra. I get 'H' on my status bar and it runs fine. The only difference I can see is the model changed to 9000 instead of 9000T. When I click on select Band I only get XSA and no other choice. NextG SIM.
Which brings me to another question, the first post says CSC: XAJP4 . did you mean XSAJP4? the same one from 2.2?
TTLExpired said:
I'm running XSAJP4 on 9000T from Telstra. I get 'H' on my status bar and it runs fine. The only difference I can see is the model changed to 9000 instead of 9000T. When I click on select Band I only get XSA and no other choice. NextG SIM.
Which brings me to another question, the first post says CSC: XAJP4 . did you mean XSAJP4? the same one from 2.2?
Click to expand...
Click to collapse
Yes, it is the same one from 2.2 JP4
Related
HIDSWVER: I9100JPKG2/I9100OJPKG1/I9100XXKF1/I9100JPKG2
Product Code: GT-I9100LKAXSG
Modified: 2011-07-07
Download link: http://www.multiupload.com/ZKZZB325NY
kei_kusanagi said:
HIDSWVER: I9100JPKG2/I9100OJPKG1/I9100XXKF1/I9100JPKG2
Product Code: GT-I9100LKAXSG
Modified: 2011-07-07
=)
Click to expand...
Click to collapse
Woah what? Is KG2 the 2.3.4 firmware update we've been waiting for? Since the KG1 leak is a smaller number...
Vulpix said:
Woah what? Is KG2 the 2.3.4 firmware update we've been waiting for? Since the KG1 leak is a smaller number...
Click to expand...
Click to collapse
I think so. It's from United Arab Emirat.
Im downloading it right now, then i'm going to upload it.
link added to the first post.
What was your previous FW version? I have KG1 installed but can´t update to KG2. Or, this is specific version for Emirates?
ad_insane said:
What was your previous FW version? I have KG1 installed but can´t update to KG2. Or, this is specific version for Emirates?
Click to expand...
Click to collapse
Yes, it's an specific version for Emirates (prodiuct code XSG). And I haven't tested yet.
Language support
Hello, for someone who flashes and tests this, can someone confirm it's 2.3.4 and also please list the locales and languages supported (Stock keyboard and swype) please?
I had flashed it. Still 2.3.3.
Mode number: GT-I9100
Android version: 2.3.3
Baseband version: I9100XXKF1
kernel version: 2.6.35.7-I9100JPKG2-CL342890 [email protected] #2
Build number: GINGERBREAD.JPKG2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
hua_wuxin said:
I had flashed it. Still 2.3.3.
Mode number: GT-I9100
Android version: 2.3.3
Baseband version: I9100XXKF1
kernel version: 2.6.35.7-I9100JPKG2-CL342890 [email protected] #2
Build number: GINGERBREAD.JPKG2
Click to expand...
Click to collapse
Really?
Why KG1 was 2.3.4 and KG2 is 2.3.3?. Did you see if it has google talk with videocalls?
Google Talk version 1.3. I don't know if is suuports videocall.
hua_wuxin said:
Google Talk version 1.3. I don't know if is suuports videocall.
Click to expand...
Click to collapse
Gtalk 1.3 should has videocall support. Does anyone could check it?
Video chat works with KG1 using the preinstalled Google Talk. Probably you gotta open gtalk click on your status and tick "enable video chat" (could differ)
Sent from my GT-I9100 using XDA App
kei_kusanagi said:
Really?
Why KG1 was 2.3.4 and KG2 is 2.3.3?. Did you see if it has google talk with videocalls?
Click to expand...
Click to collapse
it's how samsung names their firmwares.
http://samfirmware.com/samsunglettercode.htm
in _ _KG1 - K means 2011, G means July, 1 means release 1 (for that region)
the first two letters show the region. so XXKG1 is european 2.3.4 so if there was a XXKG2, then that would also be a 2.3.4.
but for UAE firmware, there hasn't been a 2.3.4 yet, so KG2 is just a newer release, but not necessarily a newer build of android.
hope that makes sense!
It does make sense, I had to read it a couple of times to make sense of it though
I check my Google Talk version in my KF3 SGS II, and it's 1.3 and most definitely w/o video chat, so it's probably (and hopefully) the LAST 2.3.3 firmware
Cheers for checking into my q!
kei_kusanagi said:
I think so. It's from United Arab Emirat.
Im downloading it right now, then i'm going to upload it.
Click to expand...
Click to collapse
darn
my luck sucks
i flashed my phone with kg1 yesterday
hua_wuxin said:
I had flashed it. Still 2.3.3.
Mode number: GT-I9100
Android version: 2.3.3
Baseband version: I9100XXKF1
kernel version: 2.6.35.7-I9100JPKG2-CL342890 [email protected] #2
Build number: GINGERBREAD.JPKG2
Click to expand...
Click to collapse
has arabic !!!
finally
root isnt needed
alexeiw123 said:
it's how samsung names their firmwares.
http://samfirmware.com/samsunglettercode.htm
in _ _KG1 - K means 2011, G means July, 1 means release 1 (for that region)
the first two letters show the region. so XXKG1 is european 2.3.4 so if there was a XXKG2, then that would also be a 2.3.4.
but for UAE firmware, there hasn't been a 2.3.4 yet, so KG2 is just a newer release, but not necessarily a newer build of android.
hope that makes sense!
Click to expand...
Click to collapse
?
The Firmwares for the Samsung Galaxy I9000 = J
and the builddate is june 2011
ex. I9000XXJVQ "J" = 2010 ?
*Sigh* good to see RTL alignment and arabic letters connected properly
kei_kusanagi said:
HIDSWVER: I9100JPKG2/I9100OJPKG1/I9100XXKF1/I9100JPKG2
Product Code: GT-I9100LKAXSG
Modified: 2011-07-07
Download link: http://www.multiupload.com/ZKZZB325NY
Click to expand...
Click to collapse
i just flashed this using Odin, it is stil 2.3.3
with added arabic, farsi and urdu languages
Can anyone root this?
Has anyone received this update?
http://www.theunwired.net/?item=enh...ance-release-for-the-samsung-galaxy-note&6088
Yes. It's the release we all got a few weeks ago!
Sent from my Samsung Galaxy Note using XDA Premium app.
Gaugerer said:
Has anyone received this update?
http://www.theunwired.net/?item=enh...ance-release-for-the-samsung-galaxy-note&6088
Click to expand...
Click to collapse
although they do not mention the build number of this "maintenance release", i'm quite sure its LA3 or LA4.
since i'm on LA3 i have all of the described changes!
TML1504 said:
although they do not mention the build number of this "maintenance release", i'm quite sure its LA3 or LA4.
since i'm on LA3 i have all of the described changes!
Click to expand...
Click to collapse
I am on build number KKA which is the latest build available OTA to me in the UK. Is the build in the article later than that?
i think its the new kies update mentioned on this thread http://forum.xda-developers.com/showthread.php?p=21578328#post21578328
look at the photos of the before and after mentioned in the article http://www.theunwired.net/?item=enh...ance-release-for-the-samsung-galaxy-note&6088 and you will see its the kies update i got last night.
ps: i got the torch widget mentioned in the article as it is useful for me
Bluetooth problem
has anyone else having Bluetooth problem with this update. Phone no longer stay connected to headunit in car.
bubblesmoney said:
i think its the new kies update mentioned on this thread http://forum.xda-developers.com/showthread.php?p=21578328#post21578328
Click to expand...
Click to collapse
All those changes where introduced in the XXKL7 Update
I am on unlocked Galaxy Note (bought in Austria), using it in Finland (Elisa operator, if it matters). Showing GINGERBREAD.XXKKA build number. And both Kies on PC and update attempt through phone settings menu says no updates available.
And I don't have those new features. How come? How to get the update??
(Preferably "the supported way" without messing with roms?)
TML1504 said:
although they do not mention the build number of this "maintenance release", i'm quite sure its LA3 or LA4.
since i'm on LA3 i have all of the described changes!
Click to expand...
Click to collapse
Seems to be LA4: http://twitpic.com/88ec01
Astrum said:
I am on unlocked Galaxy Note (bought in Austria), using it in Finland (Elisa operator, if it matters). Showing GINGERBREAD.XXKKA build number. And both Kies on PC and update attempt through phone settings menu says no updates available.
And I don't have those new features. How come? How to get the update??
(Preferably "the supported way" without messing with roms?)
Click to expand...
Click to collapse
I would not worry too quickly and wait a few days before investing more time into it.
These updates are rolled out over a certain period of time (a week or two is my impression), not every phone gets the update at the exact same time/day.
In fact I checked two days ago as well as Yesterday without being prompted that the new update was available. And just now when checking again it told me I could install the update (which I will do so when I am back home with WiFi).
So patience is probably all you need
Astrum said:
I am on unlocked Galaxy Note (bought in Austria), using it in Finland (Elisa operator, if it matters). Showing GINGERBREAD.XXKKA build number. And both Kies on PC and update attempt through phone settings menu says no updates available.
And I don't have those new features. How come? How to get the update??
(Preferably "the supported way" without messing with roms?)
Click to expand...
Click to collapse
I'm on the KKA build as well. Unlocked Note bought through The OEM Shop on Amazon.com with a product code of XEN (Netherlands). From the stock ROMs thread in the development forum, there hasn't been an update for the XEN Notes since November. I'd guess we'll be seeing the update reasonably soon.
KKA:
K=2011
K=11 > November
A=10th build in Nov.11
LA4:
L=2012
A=01 > Jan
4=4th build in Jan.12
So KKA is really old!
I strongly recommend to use at least LA1 or LA3 to have good performance!
TML1504 said:
KKA:
K=2011
K=11 > November
A=10th build in Nov.11
LA4:
L=2012
A=01 > Jan
4=4th build in Jan.12
So KKA is really old!
I strongly recommend to use at least LA1 or LA3 to have good performance!
Click to expand...
Click to collapse
*#272*IMEI# to check your phones csc
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LA1 LA3 are with XEU csc
LA4 is with DBT csc
Lets say your csc is XEU aka Europe. And your csc is a multilingual one you could pick DBT update via kies to xxla4 and again go back to XEU after that. But because the xxla4 is a nonwipe update don't expect not to loose your data because on each change of XEU to DBT and back phone does hard reset it's self.
So Carefull if you Make a mistake and you change your csc with this code IT WILL WIPE ALL YOUR DATA except sd card.
SO DON'T DO THIS MISTAKE
Sent from my GT-N7000 using Tapatalk
TML1504 said:
KKA:
K=2011
K=11 > November
A=10th build in Nov.11
LA4:
L=2012
A=01 > Jan
4=4th build in Jan.12
So KKA is really old!
I strongly recommend to use at least LA1 or LA3 to have good performance!
Click to expand...
Click to collapse
So even though my product code is XEN, can I flash the DBT LA4 non-wipe ROM through Odin? Or will it fail since the CSC codes don't match? I have Odin and the .tar file extracted, I'm just hesitant to try it. Thanks.
Why is the news suddenly picking up on this?
It's XKL7 folks, which is 3 weeks old.
See this thread:
http://forum.xda-developers.com/showthread.php?t=1412959
Is this the most recent firmware to be pushed OTA or something?
Anyone upgrading should go to LA3/LA4 though - there was quite a bit of improvement speedwise from LA1 to LA3.
- Frank
Braxos said:
*#272*IMEI# to check your phones csc
http://img.tapatalk.com/2e730062-68b5-1302.jpg[/IMG
LA1 LA3 are with XEU csc
LA4 is with DBT csc
Lets say your csc is XEU aka Europe. And your csc is a multilingual one you could pick DBT update via kies to xxla4 and again go back to XEU after that. But because the xxla4 is a nonwipe update don't expect not to loose your data because on each change of XEU to DBT and back phone does hard reset it's self.
So Carefull if you Make a mistake and you change your csc with this code IT WILL WIPE ALL YOUR DATA except sd card.
SO DON'T DO THIS MISTAKE
Sent from my GT-N7000 using Tapatalk[/QUOTE]
Mine's "NEE". Bought from Tele2 Norway.
Click to expand...
Click to collapse
Gaugerer said:
I am on build number KKA which is the latest build available OTA to me in the UK. Is the build in the article later than that?
Click to expand...
Click to collapse
Same here.
Any changes/improvements with the latest maintanence update?
Is it worth getting or no visible differences?
Dude, you'll find the answer 7 threads down
http://forum.xda-developers.com/showthread.php?t=1452050
UK Galaxy SII Owner's Thread
Here is the thread for UK SGS2 Owners.
Post reviews, opinions, custom ROMs, best modems/kernels and any relevant discussion .
• Rooting
CF-Root
• Unlocking
Use the Galaxy_S unlock app by helroz
Root and Busybox required.
• Yellow triangle and flash counter (ICS only)
TriangleAway can reset your flash counter and triangle on ICS builds.
THIS IS A DANGEROUS OPERATION AND COULD POTENTIALLY BRICK YOUR DEVICE. PROCEED AT YOUR OWN RISK.
• Latest stock official UK firmware:
I9100XWLP7 Download (Thanks To SamMobile!)
Base Firmware: I9100XWLP7 (4.0.3)
Region: United Kingdom / Ireland
Carrier: SIM FREE (Generic)
Build Date: 3rd April 2012
Modem: XXLPS
CSC: XEULP5 (XEU)
Change List:340913
CF-Root v5.4 LP7: Download
• Modems
I9100NELP3
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
------------
I9100XXLPS
------------
I9100DXLP7
------------
I9100XXLPX
------------
Untested modems (CMW Flashable)
I9100UHLPE
I9100ZSLPF
I9100ZSLPG
Rom: Latest Asnet MIUI (2.4.27)
Baseband Version: I9100XXLPS
Region United Kingdom / Ireland
Carrier: T-Mobile
Build Date: April 2012
Kernel Version: 3.0.15-I9100DXLP7-CL233393 [email protected] #3
Love it
UK Custom Deodexed Stock I9100DXLP9 Download
Base Firmware: I9100DXLP9 (4.0.3)
Region Singapore
Carrier: Sim-Free
Build Date: 20th April 2012
Modem: DXLP9
CSC: OLBLP9
Change List: 431438
Zipaligned
Rooted (CF SuperSU)
BusyBox
ClockworkMod Recovery 5
CF-Root LP8 Kernel
Credits to wanam. ROM edited for UK (kernel and modem). Excellent signal, fast internet speed, great battery life.
Tested with Three, O2, Orange, Vodafone, T-Mobile, Virgin and giffgaff.
i360* said:
I've only edited the ROM for UK to maximise signal and internet speed.
Click to expand...
Click to collapse
What does that entail?
oinkylicious said:
What does that entail?
Click to expand...
Click to collapse
Removed some bloatware, modified modem and kernel.
i360* said:
modified modem and kernel.
Click to expand...
Click to collapse
What did you modify in the modem and kernel to "maximise" signal and internet speed?
I'll pre-empt your next lie by telling you that:
GT-I9100_DXLP9.i360.UK\wanam\modem.bin is binary identical to I9100DXLP9_I9100OLBLP9_I9100DXLP9_HOME\modem.bin
and
GT-I9100_DXLP9.i360.UK\wanam\zImage is binary identical to CF-Root-SGS2_XW_XSA_LP8-v5.4-CWM5\zImage
i360* said:
UK Custom Deodexed Stock I9100DXLP9 Download
Base Firmware: I9100DXLP9 (4.0.3)
Region Singapore
Carrier: Sim-Free
Build Date: 20th April 2012
Modem: DXLP9
CSC: OLBLP9
Change List: 431438
Zipaligned
Rooted (CF SuperSU)
BusyBox
ClockworkMod Recovery 5
CF-Root LP8 Kernel
Credits to wanam. I've only edited the ROM for UK to maximise signal and internet speed.
Tested with Three, O2, Orange, Vodafone.
Click to expand...
Click to collapse
How do you install this? its a zip file ? ?
Is there a difference between my thread and yours?
http://forum.xda-developers.com/showthread.php?t=1515010
beston94 said:
Is there a difference between my thread and yours?
http://forum.xda-developers.com/showthread.php?t=1515010
Click to expand...
Click to collapse
This will be their thread about what screen guards,phone cases,how much for selling their phone,repair shops,etc
Just their regional talk about their sgs2
sahibunlimited said:
This will be their thread about what screen guards,phone cases,how much for selling their phone,repair shops,etc
Just their regional talk about their sgs2
Click to expand...
Click to collapse
Oh right, sorry its just that they didn't mention any of that
Have a good day
I have pre-rooted odin flashable stock uk roms if anyone is interested?
No counter increase, no triangle and no fuss.
Sent from my GT-I9100 using Tapatalk 2
oinkylicious said:
What did you modify in the modem and kernel to "maximise" signal and internet speed?
I'll pre-empt your next lie by telling you that:
GT-I9100_DXLP9.i360.UK\wanam\modem.bin is binary identical to I9100DXLP9_I9100OLBLP9_I9100DXLP9_HOME\modem.bin
and
GT-I9100_DXLP9.i360.UK\wanam\zImage is binary identical to CF-Root-SGS2_XW_XSA_LP8-v5.4-CWM5\zImage
Click to expand...
Click to collapse
The modem and kernel are different. Try them both out first then come back.
jowett69 said:
How do you install this? its a zip file ? ?
Click to expand...
Click to collapse
You have to install it via ClockworkMod Recovery
i360* said:
The modem and kernel are different. Try them both out first then come back.
Click to expand...
Click to collapse
Different as in ????????????
jje
I'm unrooted atm, got an insecure kernel, using the official 4.0.3 rom atm, which i received ota. only got my sgs2 on tuesday though.
I can't seem to root properly though, but I'll get around it eventually
JJEgan said:
Different as in ????????????
jje
Click to expand...
Click to collapse
It's not stock, try it.
Dheano said:
I'm unrooted atm, got an insecure kernel, using the official 4.0.3 rom atm, which i received ota. only got my sgs2 on tuesday though.
I can't seem to root properly though, but I'll get around it eventually
Click to expand...
Click to collapse
What is your Build and Baseband version?
i360* said:
The modem and kernel are different. Try them both out first then come back.
Click to expand...
Click to collapse
Do you not understand what binary identical means?
using lps 4.0.3 and its ok...tho i have a text issue where i receive a text alert in my notification bar, pull it down and open...but the homescreen text envelope still shows a message to be read. honestly, gingerbread 2.3.5. was much better...this feels like it ain't even finished.
Sent from my GT-I9100 using Tapatalk 2
oinkylicious said:
Do you not understand what binary identical means?
Click to expand...
Click to collapse
They can't be binary identical, they're not stock...
jj03 said:
using lps 4.0.3 and its ok...tho i have a text issue where i receive a text alert in my notification bar, pull it down and open...but the homescreen text envelope still shows a message to be read. honestly, gingerbread 2.3.5. was much better...this feels like it ain't even finished.
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
Try the rom i put up, it's stable, fast and up-to-date.
i360* said:
They can't be binary identical, they're not stock...
Click to expand...
Click to collapse
You're starting to irk me now.
The modem in your link is binary identical to stock. What about this do you not understand? It is the same file.
Whatever, I see you've now removed your original fantasy claim anyway (below for prosperity)
i360* said:
I've only edited the ROM for UK to maximise signal and internet speed.
Click to expand...
Click to collapse
I'll just leave that there to remind me not to trust or believe anything you post in future.
Oh! You've changed it to
i360* said:
ROM edited for UK (kernel and modem).
Click to expand...
Click to collapse
What does editing it for UK involve?
http://www.sammobile.com/firmware/
Here's the upgraded P6800 screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my GT-P6800 using XDA Premium HD app
Please, check, which languages does it contain.
I am interested especially in the Hungarian language.
Thanks,
Tibor
P6800OLBLP7 for Philipines, Thailand, Singapore, Malaysia and Indonesia. Before this OTA, Official ICS upgrade has been released for Open Austria, Hongkong, India, China etc. Please check the Official Firmware @ http://www.sammobile.com/firmware to confirm, or, go to SETTING -> ABOUT DEVICE -> SOFTWARE UPDATE to update via OTA. Otherwise, connect your device to PC Kies and begin your update. Thanks.
Sent from my GT-P6800 using XDA Premium HD app
marwanxx said:
P6800OLBLP7 for Philipines, Thailand, Singapore, Malaysia and Indonesia. Before this OTA, Official ICS upgrade has been released for Open Austria, Hongkong, India etc. Please check the Official Firmware @ http://www.sammobile.com/firmware to confirm, or, go to SETTING -> ABOUT DEVICE -> SOFTWARE UPDATE to update via OTA. Otherwise, connect your device to PC Kies and begin your update. Thanks.
Click to expand...
Click to collapse
Yes, I know it well. Originally I got the device with 3.2 HK ROM, which DOES CONTAIN HUNGARIAN also, among other EUROPEAN languages. Then I flashed ICS ROM P6800XXLQ1, then I flashed P6800XXLQ2. This is what I have now.
But this ROM also contains some bugs. That's why I also interested in other ROMs, issued later, hoping the later the version is, the less bugs are there...
Is it clear for you now?! But OK, forget it, just keep the "big secret" of avaible languages for yourself....
Tibor
Thread has been moved. Let's try to keep all these notification for firmware updates in the General section guys. Thanks.
ctibor said:
Yes, I know it well. Originally I got the device with 3.2 HK ROM, which DOES CONTAIN HUNGARIAN also, among other EUROPEAN languages. Then I flashed ICS ROM P6800XXLQ1, then I flashed P6800XXLQ2. This is what I have now.
But this ROM also contains some bugs. That's why I also interested in other ROMs, issued later, hoping the later the version is, the less bugs are there...
Is it clear for you now?! But OK, forget it, just keep the "big secret" of avaible languages for yourself....
Tibor
Click to expand...
Click to collapse
errr... why dont you use the hk rom ZSLP7... I'm downloading the today release now... will revert back if there is hungarian in there... :highfive:
EDIT: nope... just got normal SEA language...
how is the performance so far? additional apps from xxlq2?
Sent from my GT-P6800 using Tapatalk 2
Hello ctibor..
I'm just providing the INFOs and LINKs. Besides, didn't get enough time to check what language(s) inside the ROM, I also have just done updating my device.
By the way, for your information my updated ROM (via OTA) was the Official XME 3.2. Now I have the Official XME ICS 4.0.4 which contains these languages (SEA Languages):
- Bahasa Indonesia
- Bahasa Malaysia
- English (Philippines)
- English (United Kingdom)
- English (United States)
- Tieng Viet
- Thailand
- Korean
- Chinese
Hi wagnus..
There is no difference beetween XXLQ2 and the DXLP7. Also NO additional APPS.
Thanks for your interest in the THREAD.
Hi marwanxx,
Thank you very much for your detailed reply! It was really helpful to me.
Peace,
Tibor
marwanxx said:
Hello ctibor..
I'm just providing the INFOs and LINKs. Besides, didn't get enough time to check what language(s) inside the ROM, I also have just done updating my device.
By the way, for your information my updated ROM (via OTA) was the Official XME 3.2. Now I have the Official XME ICS 4.0.4 which contains these languages (SEA Languages):
- Bahasa Indonesia
- Bahasa Malaysia
- English (Philippines)
- English (United Kingdom)
- English (United States)
- Tieng Viet
- Thailand
- Korean
- Chinese
Click to expand...
Click to collapse
ctibor said:
Hi marwanxx,
Thank you very much for your detailed reply! It was really helpful to me.
Peace,
Tibor
Click to expand...
Click to collapse
Anytime.
Peace.
edan1979 said:
errr... why dont you use the hk rom ZSLP7... I'm downloading the today release now... will revert back if there is hungarian in there... :highfive:
Click to expand...
Click to collapse
The HK rom also has the wifi bug - I tried it.
Good to finally have native IME support. Came from rooted Austrian LQ1 & LQ2. No major issues in this build as well so far.
I have just updated the firmware to ICS (im in Singapore) but after updating I hv lost all wifi connection. Is there a fix for this? Please help. Thanks
Sent from my GT-P6800 using xda premium
genjo_sanzo said:
I have just updated the firmware to ICS (im in Singapore) but after updating I hv lost all wifi connection. Is there a fix for this? Please help. Thanks
Click to expand...
Click to collapse
There is no proper fix, and none of the ics versions work.
But try to switch your Flight Mode off and on a few times, switch wifi off and on a few times and then reboot the tablet.
If you are lucky it may work.
But with certain combinations of wifi networks around you, even if not connected, your wifi will fail. If there is only one network in your vicinity then it will usually work.
Do you feel lucky ?
---------- Post added at 05:56 PM ---------- Previous post was at 05:52 PM ----------
wkweksl said:
Good to finally have native IME support. Came from rooted Austrian LQ1 & LQ2. No major issues in this build as well so far.
Click to expand...
Click to collapse
Austrian LQ1 and LQ2 both have the wifi bug, I can replicate it at will.
But if you have a single wifi network in your vicinity you may not notice it.
genjo_sanzo said:
I have just updated the firmware to ICS (im in Singapore) but after updating I hv lost all wifi connection. Is there a fix for this? Please help. Thanks
Sent from my GT-P6800 using xda premium
Click to expand...
Click to collapse
Try turning off wifi first, then do a restart. That works for me after I upgraded from Hong Kong to Singapore version.
I am in Singapore, just updated yesterday.. So far looks okay. Wifi, 3g etc seems good
Sent from my GT-P6800 using xda app-developers app
The wifi only falls over if someone switches a Huawei mobile router on near your location. You don't have to be connected to it, merely switching it on will kill your wifi.
It is possible that some other routers may also do this.
Hi guys I have an issue with my S4
model# GT-I9505
version 4.3
baseband I9505XXUEMJ5
the apn protocol is disabled, and cannot enable mobile data, therefore I cannot access internet.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So how can I enable it? Do I need to upgrade the firmware or root it?How? I'm just a noob here hope someone help me resolve this.. and thanks admin for letting me post this.
i was able to root it using this method http://forum.xda-developers.com/showthread.php?t=2219803, but still I cannot enable the apn settings.. please help anyone?
up! hope someone can help? it's rooted but how can i change firmware that is safe with S4
model# GT-I9505
version 4.3
baseband I9505XXUEMJ5
If the APN is locked out, then usually it's because you have a carrier branded ROM installed and they disabled changing it to stop you using other networks. Flash a universal ROM without any branding. What's your current CSC?
Use this app from the store
https://play.google.com/store/apps/details?id=org.vndnguyen.phoneinfo
And scroll down to Firmware Info > CSC Version &
CSC Info > Firmware CSC Code
Sent from my GT-I9500
dave106 said:
If the APN is locked out, then usually it's because you have a carrier branded ROM installed and they disabled changing it to stop you using other networks. Flash a universal ROM without any branding. What's your current CSC?
And scroll down to Firmware Info > CSC Version &
CSC Info > Firmware CSC Code
Sent from my GT-I9500
Click to expand...
Click to collapse
csc version is I9505OLBEMJ5
How can I flash it using universal ROM?
And what's your csc code
CSC Info > Firmware CSC Code
Sent from my GT-I9500
dave106 said:
And what's your csc code
CSC Info > Firmware CSC Code
Sent from my GT-I9500
Click to expand...
Click to collapse
SMA is the firmware CSC Code
Ok you're currently on Phillipines (Smart). There no unbranded ROM for that region, only 3 other networks - Sun Cellular, Open Line and Globe. So if you're using one of those networks you can flash one of those or there's a unbranded ROM available for the Malaysia region.
Sent from my GT-I9500
dave106 said:
Ok you're currently on Phillipines (Smart). There no unbranded ROM for that region, only 3 other networks - Sun Cellular, Open Line and Globe. So if you're using one of those networks you can flash one of those or there's a unbranded ROM available for the Malaysia region.
Sent from my GT-I9500
Click to expand...
Click to collapse
I saw this firmware posted in this thread..http://forum.xda-developers.com/showthread.php?t=2265477
Philippines 4.4.2 Open Line
XTE-I9505XXUFNBE-20140305151852.zip
do you think this will help?
prinzj said:
I saw this firmware posted in this thread..http://forum.xda-developers.com/showthread.php?t=2265477
Philippines 4.4.2 Open Line
XTE-I9505XXUFNBE-20140305151852.zip
do you think this will help?
Click to expand...
Click to collapse
Well that's an XTE ROM which is for the Sun Cellular network. So if you're using that network it will work but if not, they may have also locked out the APN settings.
Sent from my GT-I9500
dave106 said:
Well that's an XTE ROM which is for the Sun Cellular network. So if you're using that network it will work but if not, they may have also locked out the APN settings.
Sent from my GT-I9500
Click to expand...
Click to collapse
oh that's great! I'm using sun simcard.. Can you teach me how to do it?
Grab that ROM then. The instructions to flash it are in the thread you posted - using Odin to flash the firmware
Sent from my GT-I9500
dave106 said:
Grab that ROM then. The instructions to flash it are in the thread you posted - using Odin to flash the firmware
Sent from my GT-I9500
Click to expand...
Click to collapse
thanks alot!
Thank God! It worked!