I have a laptop with a 5th gen i3 dual core cpu, 4GB of ram and a radeon r5 gpu.. but the os runs using the integrated intel hd gpu...and i can see frame drops on pubg mobile and the frame rate isnt consistant where as it should have been cuz i have seen Phoenix os run much better on lower hardware.
Can someone suggest me of a way to make the Phoenix os detect the amd dedicated gpu or perhaps a way to get much better framerates on my laptop?
(The inbuld mic has a gain bug)
I have recently intalled Android X86 on my laptop and i see a huge improvement in performance and the mic bug is resolved...(uninstalled cuz i cant get it work with a proper keymapper such as octopus)
Is there any way i could use the Android X86 kernal and phonix os on top of it?
Please reply... Thanks
Tech Programmer said:
Contact me on telegram @ADYaz
Click to expand...
Click to collapse
Can i contact you via some other means such as kik messenger?
Tech Programmer said:
No man try to come in telegram i want to talk with you
Click to expand...
Click to collapse
I install phoenixos-ROC by Aio Boot ( cause may laptop is UEFI boot), My laptop uses GT520M(only one graphic card) and Os does not recognize it, when running it runs only cpu and not running with my gpu, so it's very lag, how enable my graphic card in Phoenix-Os, plsss
Tech Programmer said:
Its is just a driver problem soo phonenix os cant do any thingh build ur own kernel with supported gpu becoz i have also external gpu but i cant use my amd gpu idk and i have tried but u try other rom/os
:good:
Click to expand...
Click to collapse
I have same problems my pc has got R5 m330 graphics cards do you help me please?
The performance on intel SOCs can be exponentially improved by disabling pstate from the grub loader.
While booting up phoenix os, press the 'e' key on the keyboard from the grub.
Replace 'quiet' with 'intel_pstate=disable" and press f10..
When you are all booted up, download kernel auditor and set the min and max cpu freq to the max allowed by your cpu and the gpu scheduling governor to 'performance' .
THE USER said:
The performance on intel SOCs can be exponentially improved by disabling pstate from the grub loader.
While booting up phoenix os, press the 'e' key on the keyboard from the grub.
Replace 'quiet' with 'intel_pstate=disable" and press f10..
When you are all booted up, download kernel auditor and set the min and max cpu freq to the max allowed by your cpu and the gpu scheduling governor to 'performance' .
Click to expand...
Click to collapse
What is kernel line? Can you write it?
ErkanTurk said:
What is kernel line? Can you write it?
Click to expand...
Click to collapse
The whole thing?
THE USER said:
The whole thing?
Click to expand...
Click to collapse
What?
Can you write a kernel that support Ryzen Vega Mobile 8 :laugh:
Hi every on i have phoinex os and i have same problem with amd gpu its not work how can i make it work or is there any android system for pc can identify the amd gpu ?
can't boot into phoenix, stuck in grub option
i have some quiestion, i've already isntalled phoenix os on AMD A12.
i have intalled the OS via usb and worked fine. but after i restart my pc i have stuck on grub menu option. can't boot into phoenix, when i choose phoenix os i just loop back to grub menu option, not boot into phoenix OS.
but if i choose windows thats work fine.
help me please, any solution for this one?
Same pb have find the solution?
Phoenix does not work on my pc: Amd athlon 64 x2 dual core 3g Radeon x1200
MinhTungMT said:
Can you write a kernel that support Ryzen Vega Mobile 8 :laugh:
Click to expand...
Click to collapse
I have same Graphics... Lenevo IdeaPad 330 with Ryzen 5 and Radeon Vega Mobile 8 Graphics...
I successfully installed Phoenix OS based on 5.1 ( Bases on 7.1 didn't worked at all, stuck on grub simulation)
But here, I have all successfully installed... oS is booting properly but as the Phoenix logo screen appears. My screen get distorted.. I can find traces of option that must be there and I Finally came into conclusion that it is just graphics problem ... Everything is fine except the Graphics setting or Driver's whatever it may be is missing
..
Please help if anyone finds out something
It does not seem there is fix for that
I'm also having the same issue when I open pubg is stuck in the logo screen
My laptop is running 4gb ram
Amd graphics card
Pls help me out
akshansh1998 said:
I have same Graphics... Lenevo IdeaPad 330 with Ryzen 5 and Radeon Vega Mobile 8 Graphics...
I successfully installed Phoenix OS based on 5.1 ( Bases on 7.1 didn't worked at all, stuck on grub simulation)
But here, I have all successfully installed... oS is booting properly but as the Phoenix logo screen appears. My screen get distorted.. I can find traces of option that must be there and I Finally came into conclusion that it is just graphics problem ... Everything is fine except the Graphics setting or Driver's whatever it may be is missing
..
Please help if anyone finds out something
Click to expand...
Click to collapse
hii, did u find a way to fix it ?
phoenix and prime os screen booting black and scratching
i need your help plz developpers and members, i intalled phoenix os latest version and i tried old versions later...the story is when i installed for the first time,it boot normally on my toshiba i7 intel Amd radeon graphics,and everything works normally at the first boot, but when i restart the phoenix os without even getting inside the windows,just restarting the phoenix,it becomes to boot and the image on the screen is dissorted and black and the screen become to flash,and never boot again, i tried to change kernels, or roc , nothing change...same thing happened when i installed prime os, same thing first boot normally and after first restart same problem on the screen, it is clear that it is a developping bugs,and it is related to the screen itself or the vga,plz i need someone who can help me to solve it and to communicate with to fix this together step by step...any help, thank .
Related
I have tried installing android x86 to an external hdd and booting from it, and I also tried simply running the live version but nothing works, it just gets stuck on the logo screen. I tried the android-x86_64-6.0-r1 version, the Android-x86_6.0 - Remix OS for PC - 64 bit and the android-x86-4.4-r5
I also tried installing the Phoenix OS x86, but I get an error that my device isn't compatible even though it has an Intel Atom cpu which should work as far as I know.
This is the exact model I have: HP Pavilion X2 10-n107nc
I would really appreciate some advice, because I have been trying for days and I just can't get it to work and I am running out of ideas.
Also saw this model in UK and also don't want to wait for chuwi for 3 weeks . As far as i know In chinese models of intel atom tablets there is special bootloaders to boot two systems (iwork, chuwi) and on x64 architecture you can install grub and android image, the best option is to write to intel atom section
Link:
http://bbs.phoenixstudio.org/en/showthread.php?tid=5616
Update details
This version is 64bit with Kernel 4.9
Add Multiboxing feature（The feature allows you to create a duplicate of an app. The duplicate and origin one run separately with independent data and resources. All data in the duplicate will be erased after it's eliminated while data of the original one is still there.)
The screen problem cause by Nvidia Graphics card has been fixed.
Improve compatibility.
Update pre-installed apps
Support OTA
The keyboard mapping will automatically suspended while you're entering text.
1. Thanks. Every things work fine. Only missing GApps . Is there any way to install them?
2.I installed via exe file. I want to use my computer with tv via HDMi. My laptop is a few year old and it is BIOS, not UEFI. How I can Off nativ screen ( mylaptop screen)? I want to use only mt Tv as my main screen.
I have installed phoenix on hdd on tablet with intel atom x5 and intel hd graphic, UEFI Secured boot disabled, i choose phoenix from boot, after writing '' search phoenix os ... found on sdaetc.etc. '' The screen gets black and blocks everything, can you help me? sorry for my bad english
Lost sound with update
Hi Guys. After days of setting up my cheap X86_64 Chuwi Android box to run PhoenixOS and windows and to boot normally I lost sound after update. I had the hacked 2.0.1 version with gapps and root from a forum on the PhoenixOS website. Sorry I can't post links yet. So somehow someone got sound to work on this device but not sure how they did it. Windows says my soundcard is a Intel SST Audio Device (WDM). So now I have 2.0.2 but no sound. . Any Ideas?
Hey , where to download 2.0.2 32bit ? 64 bit is not working for me , same Problem like remix 64, blisspop 64 and all other Android x86_64 ... Just looping before bootlogo. I dont understand why becorse win 7 and 10 64 also working fine like of all Android x86 32. thanks
Version 2.0 is available for 32b
@wizmart
I know but 2.0.0 is not the same as 2.0.2 i will try it today , but i dont understand why 64 bit is looping while win 64 is working. I hope soon every New Version would be arriveable AS 32 bit , many people i know only can use 32 bit on older PCs.
stucks at a black screen..seems to be a bootloop on my laptop..(amd a4-6210)
tried dual booting with ubuntu and windows..same result
but boots fine on my computer with intel i3 and nvidia card!
can anyone tell me what is the problem and if there is a 32 bit version that will work? i need this for development processes!
Hi all, I've searched online for a solution, but anything, now I've found this section on XDA.
I've used Rufus to burn a USB stick with Phoenix installer iso from the official site, I've installed fine in my hard disk (to get windows and Phoenix separate), but when I try to boot it get stucked on Android x86_64 command line.
My specs are:
CPU: Intel Pentium dual core E5500
GPU: Integrated Intel g41 express
Motherboard: Acer m275 (the Acer veriton mini atx)
I've tried some kernel commands like nomodeset but nothing.
I have this problem with all Android iso, the same error.
Thanks in advance.
(Sorry for my bad English, I'm Italian)
same problem here...
Evasi0n3r said:
Hi all, I've searched online for a solution, but anything, now I've found this section on XDA.
I've used Rufus to burn a USB stick with Phoenix installer iso from the official site, I've installed fine in my hard disk (to get windows and Phoenix separate), but when I try to boot it get stucked on Android x86_64 command line.
My specs are:
CPU: Intel Pentium dual core E5500
GPU: Integrated Intel g41 express
Motherboard: Acer m275 (the Acer veriton mini atx)
I've tried some kernel commands like nomodeset but nothing.
I have this problem with all Android iso, the same error.
Thanks in advance.
(Sorry for my bad English, I'm Italian)
Click to expand...
Click to collapse
assal said:
same problem here...
Click to expand...
Click to collapse
Just made an Installation video here on how to do it, downloaded the x64 iso version and burned it to a 16gb USB stick, partition scheme needs to be MBR for UEFI and legacy bios and format as FAT32, etc etc, you will also need parted magic on a seperate USB stick or bootable CD.
Installation for single OS video is here: https://youtu.be/c68qgPepjFI
If you want a dual boot, Windows and Phoenix, then boot into windows and use the downloader, the iso is for single OS only or Live CD/USB.
Update Detail
- Optimization game helper compass problem.
- Support 8723BU to connect wifi
- Update browser. Now stardust browser remove chromium kernel.
- Stardust browser can watch live video now.
Link: http://bbs.phoenixstudio.org/en/showthread.php?tid=10008
Revert
Reverted back to version 2.5.8 on my Acer Aspire R3-131T-C4TH. <--Luckily I had a recent BackUp.
The system was very very slow. <-- Even the fade-in on the bootanimation took like 5 seconds.
Keep up the good work.
there is a non-root version? Tks
unable to update play services. anyone?
bbmadzky said:
unable to update play services. anyone?
Click to expand...
Click to collapse
https://forum.xda-developers.com/ph...release-phoenixos-android-pc-toolbox-t3748153
Use this tool.. You can easily update google play service to latest version.. All gapps functions are working well on PhoenixOS..
Can anybody help? When i boot from USB with PhoenixOS 2.5.9 created with Rufus i see only grub2 command line and no another interface. I tried both GPT and MBR modes for creating boot-USB drive. What I should do to install OS? Maybe I should type something into this command line?
re-install?
Sillor said:
Can anybody help? When i boot from USB with PhoenixOS 2.5.9 created with Rufus i see only grub2 command line and no another interface. I tried both GPT and MBR modes for creating boot-USB drive. What I should do to install OS? Maybe I should type something into this command line?
Click to expand...
Click to collapse
format your USB NTFS. Use Link: http://bbs.phoenixstudio.org/en/show....php?tid=10008. (Thanks REGNAS) to get Phoenix installer (latest). Install from desktop onto USB. Good luck.
I can't record screen on Phoenix OS V1.5.0. Every app crashes after starting to record. Please help me?
WoltreX said:
https://forum.xda-developers.com/ph...release-phoenixos-android-pc-toolbox-t3748153
Use this tool.. You can easily update google play service to latest version.. All gapps functions are working well on PhoenixOS..
Click to expand...
Click to collapse
I find it difficult to use as I am using single boot.
On my tablet PC the orientation is inverted.. landscape is portrait and portrait is landscape..
how to root it ? becase alt+f1 or alt+fn+f1 doesn't calling terminal
hello i'm having some problems after installing phoenix os.
when it has finished installing phoenix os and at the time of its installation os [when choosing the language for phenixnya] then my laptop suddenly restar itself, and I think I have to install phoenix os correctly, is there any way?
32 bit version
Is there any hope for the 32 bit version?
magisk fix root
sierrabravo said:
there is a non-root version? Tks
Click to expand...
Click to collapse
i have rooted 32bit 64bit 2.0 to 2.5.9 successfully with magisk
How to install Phoenix OS 2.5.9 64 bit?
I want to install Phoenix OS 2.5.9 on an 5 year old Laptop (Acer Aspire 5733z) currently running Window 10 32bit.
My laptop has 64 bit processor Intel pentium p6200 and 2 GB ram.
My laptop can support and run phoenix os 64 bit version. But I have to install it from ISO file because 64 bit version has a x64 installer which my window don't support.
For safety of my files, i installed Phoenix os 64 bit from iso with window 10 in oracle virtual box. It installed and worked perfectually.(testing in oracle virtual box happened on another computer)
But now there is no option to boot window 10 in GRUB bootloader only Phoenix os.
Can someone help me please?
Thanks in advance!
Is there any hope for the 32 bit version?
druhboruch1 said:
Is there any hope for the 32 bit version?
Click to expand...
Click to collapse
No . Day to Day mobile OS are getting heavier too . Processors with 32 bit architecture can't handle that much load.
So , i think 32 bit version of phoenix os will now stick at old 1.5.0 lolipop version.
funkdubbies said:
how to root it ? becase alt+f1 or alt+fn+f1 doesn't calling terminal
Click to expand...
Click to collapse
Try Ctrl+Alt+F1. It worked for some users that had the same issue as you
Someone can Help me with a connection problem?
after the installation the internet was working, but after reboot, the internet stopped working, even configuring an static ip.
I'm using a desktop with wired cable and I don't have wireless network card
1.5.0 x86 Phoenix OS
Sorry for my bad english and sorry for posting here.
So.. I just installed Phoenix OS on my laptop, using the latest exe file. Once finished, I went on to restart the PC, then, there is a screen / terminal that I can choose between 2 OS, which is my Windows 10 , and Phoenix OS. Picking Windows 10 would boot Windows 10, but when I pick Phoenix OS, it just goes black, then after 5 seconds it just restarts and goes back to the terminal. Reinstalling won't help. Turning off secure boot and fast boot also doesnt work. Please help.
.
If you are wondering if there are any white text or logs that show when I pick an OS on tge terminal, there is, but only when I pick Windows 10, picking phoenix, as I already said, doesn't show anything, just blackness, though I know the laptop is turned on because I can see the brightness, and after 5 seconds, it turns off and turns back on again (restarts)
My laptop specs are.. AMD A9-9420 , RADEON R5 M420, 4GB RAM.
Asus X555BP
have you tried this or this ?
I haven't tried any of those solution, I will try them out. But I am unsure on how to do the solution where you replace the grub file from ubuntu(?) because I do not have ubuntu and also, i do not have any knowledge about that OS. . Recently, I tried installing Phoenix OS via ISO using a bootable flash drice, and it gives me the same result. When I choose install on harddrive, it just restarts on the terminal, when i try boot directly from usb, it also restarts. Maybe theres some incompatability issues on my hardware?
EDIT: So sorry for not reading the whole thing, the grub files were on the attachements. I feel so dumb
Tried the two solutions, none worked. I will read from that thread and see if i can find any other solutions
Atsukiri said:
My laptop specs are.. AMD A9-9420 , RADEON R5 M420, 4GB RAM.
Asus X555BP
Click to expand...
Click to collapse
Sorry to say but Phoenix-OS has problems with APU or Radeon graphics ,I was banned when I raise this question on their forum ,try android-x86 ,it should work or bliss-x86
Actually the exact problem happen to My Dual Core PC too.. using NVIDIA GT 210
The answer is simple: Your processor is not supported.
hi guys, I want use Phoenix OS in my laptop with windows 7. but laptop don't asking to me in preloading screen. I was used before time windows 7 and Phoenix OS in this laptop. why I can't install now?
Phoenix os unable to boot
My CPU IS CORE 2 QUAD q6600 2.4GHZ
Phoenix not booting and going back to terminal again and again after detecting phoenix os.....found at /dev/sda3
Doesn't work on my Pentium Dual Core e5500 2.8 GHz
The Lollipop version of Phoenix OS works fine but the Nougat one won't run..
Same problem here.. Did you find any solution of this problem... If you find any solution please help me..
My laptop lenovo AMD E2.
WoltreX said:
The answer is simple: Your processor is not supported.
Click to expand...
Click to collapse
Thanks. Everyone tried to make their (old) rig work on Phoenix, I found installing 1.5 worked for me, too bad it is very outdated with the Play service unable to update (Error 910). Do you have any clues what could go wrong?
Thinkpad x100e, AMD NV-40, 4G RAM
I have installed Phoenix Os on a variety of laptop and pc processors, succes install Phoenix Os on Acer A6 and Lenovo A8 with Phoenix ROC : D, sucess installs my PC core 2 duo E7500 with Phoenix Os v1.5 because it only supports sse4.1, and my laptop Lenovo a9 succes install Phoenix OS with a little problem in UEFI bios settings, try to set UEFI to allow access to Boot for Phoenix OS, so if anyone thinks Phoenix OS can't be installed on the AMD processor it is wrong >: |
Same problem
I'm going through same problem.. have you find any solution??? I'm on AMD too
Edit: Problem's with nougat version.. Running Lollipop version successfully
WoltreX said:
The answer is simple: Your processor is not supported.
Click to expand...
Click to collapse
nope i worked phoenix on dual core processor