i have LG G2 D802 32gb ... heres the details...
i tried to flash twrp recovery which lead me to fastboot with no recovery no download mode no adb connection just fastboot...
after two days of reading threads after threads i flashed "pgpt32g.img" "rpm.img" "sbl1.img" "sgpt32g.img" and "tz.img" with fastboot.. after that i finally saw my device booted normally.. but dont know why the touch went crazy... like theres something wrong with the screen... i thought i messed it up or its some software issue... so i downloaded D80220F_00.kdz and flashed it on my phone... once again i am stuck.. now on LG logo... after that i downloaded ""Europe OPEN D80220B_00"" "TMO-EE 32GB D80210B_00" and "UK Open 16GB D80210B_00" and flashed them one by one ... i am still at my LG logo phone doesnt go further....
now... i found these websites here on xda
http://lg-firmware-rom.com/
http://csmg.lgmobile.com:9002/csmg/b...heck2.jsp?esn=
i searched the firmware with entering my imei and both sites are giving me same kdz now... i flashed this file too... nothing happened all i see is LG logo and led changing colors....ALSO TRIED HARD RESETTING THE PHONE STILL NO HOPE...
hope you guys reply soon
thanks..
Still does it even with CSE flash?
same situation after getting workable download mode. i have flashed cell with lg flash tool 2014 but at the middle of the progress of flashing kdz my cell phone does not recognize by the flash tool.
Current Situation of my cell phone.
i can access to stock recovery which allows my to do factory reset which i have perform many times.
when i turn on the cell phone it shows lg logo with blinking different LED lights and nothing happen after that.
when lg logo is shown and lights blink i connect it with PC my cell phone detected in download mode with COM 15 but when i again flash the KDZ file its just restart my cell phone and at 9% of the progress its stop to recognize my cell phone.
i have no access to fastboot mode.
I hope so someone will help me out in this situation
---------- Post added at 07:24 AM ---------- Previous post was at 07:08 AM ----------
I have done CSE flash.
Lg g2 D802 32GB
Got my phone bricked once when trying to install lollipop rom.
After successfuly restoring it and getting the 16GB error and fixing it I restored to stock 4.2.2 and in recovery accidently installed the KK bootloader and rebooted instead of installing the rom.
No download mode.
No recovery.
First phone booted and then the screen turned off and was only sounds (Booting in, connecting to pc, etc.)
Now nothing.
the only thing I managed to enter is the Hard button mode....
I tried every forum,thread,files,method mentioned exept the "Open the phone to pieces and tinker with it" method mentioned here somewhere.
If there is some hope for me before going to a repair shop and hopefully someone there smarter than me and can actually fix it... would really appreceate every advice you might have on the matter.
Thank you.
I here by declare the LG g2 D802 32GB UNbrickable
What I did to fix it.
Some of it I dont understand...
My specs:
Windows 8.1 64 bit
Ubuntu 64bit on Vmware
lg g2 drivers(mixed, I had pdanet drivers, adb drivers so not sure which)
What i did:
1- adb devices on windows
Seen what I have in the picture
adb reboot recovery/bootloader/reboot/fastboot
Until I saw some writings and phone entered this state:
http://forum.xda-developers.com/showthread.php?t=2582142
Using this files:
(because its a 32GB variant) in ubuntu I did the instructions
http://www.mediafire.com/download/3qyac22qat2aucj/D802_20B32GB.zip
then unplugged phone
Fully power off
Hold volume up button
DOWNLOAD MODE.
And from there its all history....
Hope it helps someone here
Briked my lg g2 d802
first bricked attempt phone get into fastboot after flashing laf.img recovery.img it back into lg logo.... ill try flashing kdz phone stuck on lg logo cant boot further and try same method on flashing tot got same result m all stuck on lg logo not going further no recovery mode only stuck at lg logo and download mode.. please help trying since two day
Acolis said:
Lg g2 D802 32GB
Got my phone bricked once when trying to install lollipop rom.
After successfuly restoring it and getting the 16GB error and fixing it I restored to stock 4.2.2 and in recovery accidently installed the KK bootloader and rebooted instead of installing the rom.
No download mode.
No recovery.
First phone booted and then the screen turned off and was only sounds (Booting in, connecting to pc, etc.)
Now nothing.
the only thing I managed to enter is the Hard button mode....
I tried every forum,thread,files,method mentioned exept the "Open the phone to pieces and tinker with it" method mentioned here somewhere.
If there is some hope for me before going to a repair shop and hopefully someone there smarter than me and can actually fix it... would really appreceate every advice you might have on the matter.
Thank you.
I here by declare the LG g2 D802 32GB UNbrickable
What I did to fix it.
Some of it I dont understand...
My specs:
Windows 8.1 64 bit
Ubuntu 64bit on Vmware
lg g2 drivers(mixed, I had pdanet drivers, adb drivers so not sure which)
What i did:
1- adb devices on windows
Seen what I have in the picture
adb reboot recovery/bootloader/reboot/fastboot
Until I saw some writings and phone entered this state:
http://forum.xda-developers.com/showthread.php?t=2582142
Using this files:
(because its a 32GB variant) in ubuntu I did the instructions
http://www.mediafire.com/download/3qyac22qat2aucj/D802_20B32GB.zip
then unplugged phone
Fully power off
Hold volume up button
DOWNLOAD MODE.
And from there its all history....
Hope it helps someone here
Click to expand...
Click to collapse
How did you get to adb?, i have a bricked device that shows only QHSUS_BULK without drivers
Faddy132 said:
first bricked attempt phone get into fastboot after flashing laf.img recovery.img it back into lg logo.... ill try flashing kdz phone stuck on lg logo cant boot further and try same method on flashing tot got same result m all stuck on lg logo not going further no recovery mode only stuck at lg logo and download mode.. please help trying since two day
Click to expand...
Click to collapse
Stay calm buddy, LG G2 is unbrickable, I had the same problem, I thought that I have bricked it, but fix was simple, I had only download mode, but KDZ restore stucked, what I did was just wait some time, cause LG flash tool has some problems with loading files, it just takes some time, so load it from your folder(kdz) , then wait some time and after that just start it, then you have to be patient cause it takes some time, I experienced some errors too, so just dont unplug it and wait, relax, it works
I have D802 32gb czech version
I flashed v30a Italy version and it works
just flash the right version
MosesTheTool said:
How did you get to adb?, i have a bricked device that shows only QHSUS_BULK without drivers
Click to expand...
Click to collapse
does the phone being recognized in windows when you start adb and using adb devices command?
you can use this to install ADB and run it from CMD in windows:
http://forum.xda-developers.com/showthread.php?p=48915118#post48915118
Acolis said:
does the phone being recognized in windows when you start adb and using adb devices command?
you can use this to install ADB and run it from CMD in windows:
http://forum.xda-developers.com/showthread.php?p=48915118#post48915118
Click to expand...
Click to collapse
No it doesn't, i have ADB, i know how to use it, i already saved one D800 that was in Fastboot.
Problem is, i used the debrick method, i succeeded, but now the device is recognized as LG but the screen stays black. It's acting a bit weird, it flashes with LG FLASH TOOL, although i believe it's not even in Download mode, but the screen keeps staying black.
Stuck at logo
janmynar said:
Stay calm buddy, LG G2 is unbrickable, I had the same problem, I thought that I have bricked it, but fix was simple, I had only download mode, but KDZ restore stucked, what I did was just wait some time, cause LG flash tool has some problems with loading files, it just takes some time, so load it from your folder(kdz) , then wait some time and after that just start it, then you have to be patient cause it takes some time, I experienced some errors too, so just dont unplug it and wait, relax, it works
I have D802 32gb czech version
I flashed v30a Italy version and it works
just flash the right version
Click to expand...
Click to collapse
still stuck at logo flashing same version kdz twice and thrice result is same.. i think i jz RIP my phone.. I have lg g2 D802 international variant if you have any other solution to wake my phone so tell me bro.. its makes me so frustrated..
hi, I really need your help because I am lost, I update my LG D802 / 32gb to lollipop but he remained blocked on LG logo, despite the fact that it displays up-to-date with complete success, I tried the download mode,but its blocked in fastboot mode, the hard reset does not work.
how to repaired, please help :crying:
http://dl-1.va.us.xda-developers.co....jpg?key=v2v0pRZLPQSQCXsEpTSUrw&ts=1432333679
hakim31 said:
hi, I really need your help because I am lost, I update my LG D802 / 32gb to lollipop but he remained blocked on LG logo, despite the fact that it displays up-to-date with complete success, I tried the download mode,but its blocked in fastboot mode, the hard reset does not work.
how to repaired, please help :crying:
http://dl-1.va.us.xda-developers.co....jpg?key=v2v0pRZLPQSQCXsEpTSUrw&ts=1432333679
Click to expand...
Click to collapse
Hi,
I had the same problem as you. I follow this guide http://forum.xda-developers.com/showthread.php?t=2681089.
It help me get the download mode but now i'm block
please im stuck in fastboot and have a few problems.
1.When i type 'fastboot devices', my device shows up as '?'
2.When i type any command in cmd it doesnt work. For example: I type 'fastboot erase laf" and the command shows up on my g2 screen but it stays there. I dont get an 'OKAY'.
lg g2 d802 30gb
please please help:crying:
While trying to install custom recovery through autorec my LG G2 sold as D802 and infact an LS980 got bricked and showing white pixelated lines and black screen.
- No recovery mode
-No download mode shown on screen
- No fastboot mode shown on screen
-Phone shows up as unspecified android device on windows 10 and connected through Marshall London Bootloader Interface
-Phone switches off and on while pressing power key, rest not known
-Flashtool doesn't recognize any device.
-command prompt in fastboot tool can erase data on the phone, but can't flash any img files
I've searched and read various forms and articles through internet. no one has found any proper solution though some people claims that hex code editing or flashing a partition and a tot file through fastboot mode may solve the issue and tried a few of them. No positive sign till now, I'm r trying out the fastboot method right now, But I'm not sure whether my phone is switching into fastboot mode or not
Can some one please guide me to get the partition file (laf.img) for LS980. ??????????
And if someone can share some serious input on this problem, it'll be really useful for a lot of users includng me.
Or even suggest some methods for trying out.
whenever i got stuck with this sort of errors i used to find my way out using reading tutorials and forums on xda. But this time i cant find a way out.
prnv said:
While trying to install custom recovery through autorec my LG G2 sold as D802 and infact an LS980 got bricked and showing white pixelated lines and black screen.
- No recovery mode
-No download mode shown on screen
- No fastboot mode shown on screen
-Phone shows up as unspecified android device on windows 10 and connected through Marshall London Bootloader Interface
-Phone switches off and on while pressing power key, rest not known
-Flashtool doesn't recognize any device.
-command prompt in fastboot tool can erase data on the phone, but can't flash any img files
I've searched and read various forms and articles through internet. no one has found any proper solution though some people claims that hex code editing or flashing a partition and a tot file through fastboot mode may solve the issue and tried a few of them. No positive sign till now, I'm r trying out the fastboot method right now, But I'm not sure whether my phone is switching into fastboot mode or not
Can some one please guide me to get the partition file (laf.img) for LS980. ??????????
And if someone can share some serious input on this problem, it'll be really useful for a lot of users includng me.
Or even suggest some methods for trying out.
whenever i got stuck with this sort of errors i used to find my way out using reading tutorials and forums on xda. But this time i cant find a way out.
Click to expand...
Click to collapse
i would suggest just to be sure before you can do more harm.. to post and ask in the goign back to stock thread.. you will get help there
Same issue
I have the same story with my LG G2 D802 any luck?
I have the same issue... Please give updates on your progress
I have Got The Same Issue.....no COM port so as to flash tot, i cant also flash using flash tools. Somebody Help
Same here, you guys burn your G2?
Looks like I'm a bit late for the party. Well i ended up my lg g2 ls980 (sold as d802) in the same condition. I fixed it by booting into qhsusb_bulk mode by shorting the capacitors and using srktool. Now my phone can boot into download mode!
(Note: this method only works if your phone shows up as qhsusb_bulk and not qdloader or something like that)
Hello friends.
Just today I tried to flash CM13 on my D802. I did. After that, I pressed reboot system as usual.
This is the weird thing: after pressing that, the phone showed the LG logo for a second then the screen went full black.
Now I can't boot the device. I have download mode available... No download mode though.
When I plug the device to my PC I get a ton of Windows Explorer prompts saying "You need to format the »something« in orded to use it". Like 10 of these.
Please help? I still have download mode available to me.
I already tried LG Flash Tools to return to stock but when it gets stuck on 60%. Then i get the message "the phone is disconnected from PC or USB". When I try the R&D Test Tool i get the message "Port or Serial not found"... Please help...
My Bad
Forgot to install LG drivers...