Lg g2 D802 32GB
Got my phone bricked once when trying to install lollipop rom.
After successfuly restoring it and getting the 16GB error and fixing it I restored to stock 4.2.2 and in recovery accidently installed the KK bootloader and rebooted instead of installing the rom.
No download mode.
No recovery.
First phone booted and then the screen turned off and was only sounds (Booting in, connecting to pc, etc.)
Now nothing.
the only thing I managed to enter is the Hard button mode....
I tried every forum,thread,files,method mentioned exept the "Open the phone to pieces and tinker with it" method mentioned here somewhere.
If there is some hope for me before going to a repair shop and hopefully someone there smarter than me and can actually fix it... would really appreceate every advice you might have on the matter.
Thank you.
I here by declare the LG g2 D802 32GB UNbrickable
What I did to fix it.
Some of it I dont understand...
My specs:
Windows 8.1 64 bit
Ubuntu 64bit on Vmware
lg g2 drivers(mixed, I had pdanet drivers, adb drivers so not sure which)
What i did:
1- adb devices on windows
Seen what I have in the picture
adb reboot recovery/bootloader/reboot/fastboot
Until I saw some writings and phone entered this state:
http://forum.xda-developers.com/showthread.php?t=2582142
Using this files:
(because its a 32GB variant) in ubuntu I did the instructions
http://www.mediafire.com/download/3qyac22qat2aucj/D802_20B32GB.zip
then unplugged phone
Fully power off
Hold volume up button
DOWNLOAD MODE.
And from there its all history....
Hope it helps someone here
Briked my lg g2 d802
first bricked attempt phone get into fastboot after flashing laf.img recovery.img it back into lg logo.... ill try flashing kdz phone stuck on lg logo cant boot further and try same method on flashing tot got same result m all stuck on lg logo not going further no recovery mode only stuck at lg logo and download mode.. please help trying since two day
Acolis said:
Lg g2 D802 32GB
Got my phone bricked once when trying to install lollipop rom.
After successfuly restoring it and getting the 16GB error and fixing it I restored to stock 4.2.2 and in recovery accidently installed the KK bootloader and rebooted instead of installing the rom.
No download mode.
No recovery.
First phone booted and then the screen turned off and was only sounds (Booting in, connecting to pc, etc.)
Now nothing.
the only thing I managed to enter is the Hard button mode....
I tried every forum,thread,files,method mentioned exept the "Open the phone to pieces and tinker with it" method mentioned here somewhere.
If there is some hope for me before going to a repair shop and hopefully someone there smarter than me and can actually fix it... would really appreceate every advice you might have on the matter.
Thank you.
I here by declare the LG g2 D802 32GB UNbrickable
What I did to fix it.
Some of it I dont understand...
My specs:
Windows 8.1 64 bit
Ubuntu 64bit on Vmware
lg g2 drivers(mixed, I had pdanet drivers, adb drivers so not sure which)
What i did:
1- adb devices on windows
Seen what I have in the picture
adb reboot recovery/bootloader/reboot/fastboot
Until I saw some writings and phone entered this state:
http://forum.xda-developers.com/showthread.php?t=2582142
Using this files:
(because its a 32GB variant) in ubuntu I did the instructions
http://www.mediafire.com/download/3qyac22qat2aucj/D802_20B32GB.zip
then unplugged phone
Fully power off
Hold volume up button
DOWNLOAD MODE.
And from there its all history....
Hope it helps someone here
Click to expand...
Click to collapse
How did you get to adb?, i have a bricked device that shows only QHSUS_BULK without drivers
Faddy132 said:
first bricked attempt phone get into fastboot after flashing laf.img recovery.img it back into lg logo.... ill try flashing kdz phone stuck on lg logo cant boot further and try same method on flashing tot got same result m all stuck on lg logo not going further no recovery mode only stuck at lg logo and download mode.. please help trying since two day
Click to expand...
Click to collapse
Stay calm buddy, LG G2 is unbrickable, I had the same problem, I thought that I have bricked it, but fix was simple, I had only download mode, but KDZ restore stucked, what I did was just wait some time, cause LG flash tool has some problems with loading files, it just takes some time, so load it from your folder(kdz) , then wait some time and after that just start it, then you have to be patient cause it takes some time, I experienced some errors too, so just dont unplug it and wait, relax, it works
I have D802 32gb czech version
I flashed v30a Italy version and it works
just flash the right version
MosesTheTool said:
How did you get to adb?, i have a bricked device that shows only QHSUS_BULK without drivers
Click to expand...
Click to collapse
does the phone being recognized in windows when you start adb and using adb devices command?
you can use this to install ADB and run it from CMD in windows:
http://forum.xda-developers.com/showthread.php?p=48915118#post48915118
Acolis said:
does the phone being recognized in windows when you start adb and using adb devices command?
you can use this to install ADB and run it from CMD in windows:
http://forum.xda-developers.com/showthread.php?p=48915118#post48915118
Click to expand...
Click to collapse
No it doesn't, i have ADB, i know how to use it, i already saved one D800 that was in Fastboot.
Problem is, i used the debrick method, i succeeded, but now the device is recognized as LG but the screen stays black. It's acting a bit weird, it flashes with LG FLASH TOOL, although i believe it's not even in Download mode, but the screen keeps staying black.
Stuck at logo
janmynar said:
Stay calm buddy, LG G2 is unbrickable, I had the same problem, I thought that I have bricked it, but fix was simple, I had only download mode, but KDZ restore stucked, what I did was just wait some time, cause LG flash tool has some problems with loading files, it just takes some time, so load it from your folder(kdz) , then wait some time and after that just start it, then you have to be patient cause it takes some time, I experienced some errors too, so just dont unplug it and wait, relax, it works
I have D802 32gb czech version
I flashed v30a Italy version and it works
just flash the right version
Click to expand...
Click to collapse
still stuck at logo flashing same version kdz twice and thrice result is same.. i think i jz RIP my phone.. I have lg g2 D802 international variant if you have any other solution to wake my phone so tell me bro.. its makes me so frustrated..
Related
Hello, I ran into a problematic brick on my L5...nothing seems to work to unbrick it.
I followed the guides step by step using the KDZ updater and the appropriate firmware for my country, but it doesn't work.
How I bricked it:
I had CM10 installed and perfectly running for a month, so today I decided to attempt an overclock to speed the device up a bit.
So, I downloaded and installed the modded kernel, flashed it using CWM and rebooted the device. After that, the device just keep booting up, showing the LG logo and then a black screen.
Now, after trying to flash the old firmware after going into download mode it just stops on the LG logo with the flare (sun ray effect) spinning around the logo all the time...It's been like that for almost 30 minutes now. I attempted re-flashing it 3 times but nothing seems to work.
What do I do?
Thank you in advance.
It's bootloop. When I had L5 I had the same problem after flashing bricked phone via KDZ.
Do hard reset with key combination. It worked for me. Phone will boot up few minutes.
LeoFalto said:
Hello, I ran into a problematic brick on my L5...nothing seems to work to unbrick it.
I followed the guides step by step using the KDZ updater and the appropriate firmware for my country, but it doesn't work.
How I bricked it:
I had CM10 installed and perfectly running for a month, so today I decided to attempt an overclock to speed the device up a bit.
So, I downloaded and installed the modded kernel, flashed it using CWM and rebooted the device. After that, the device just keep booting up, showing the LG logo and then a black screen.
Now, after trying to flash the old firmware after going into download mode it just stops on the LG logo with the flare (sun ray effect) spinning around the logo all the time...It's been like that for almost 30 minutes now. I attempted re-flashing it 3 times but nothing seems to work.
What do I do?
Thank you in advance.
Click to expand...
Click to collapse
I was forced to do a hard reset...that sucks but it had to be done.
Thank you.
I have a worst brick, I was rebooting when my phone frozen at the shuting down page, so I took out the batterie, then when I tried to turn on .... nothing, not even lg logo, nor buttons lights, ... nothing, I can't even activate download mode to reflash it!!! what can I do???, does anyone had same problem before
please help me I'm really starting to freack
aeoros said:
I have a worst brick, I was rebooting when my phone frozen at the shuting down page, so I took out the batterie, then when I tried to turn on .... nothing, not even lg logo, nor buttons lights, ... nothing, I can't even activate download mode to reflash it!!! what can I do???, does anyone had same problem before
please help me I'm really starting to freack
Click to expand...
Click to collapse
i had the same problem with my l7 ... problem was solved in an authorized gsm service with jtag method...
but i will try to help u with this... Your phone is seen in device manager as unknown or lge android platform or adb ... ? if so, try with adb sdk tools...
nastase.alex said:
i had the same problem with my l7 ... problem was solved in an authorized gsm service with jtag method...
but i will try to help u with this... Your phone is seen in device manager as unknown or lge android platform or adb ... ? if so, try with adb sdk tools...
Click to expand...
Click to collapse
nop, it's like the device is dead,
Have you tried it:
Hold together volumn (-) + home button, then turn the power on
sorry for the delay, The phone was dead so I send it to the warranty and they send it to LG and then returned working so I just had to reroot it and update it again
so there is no solution to this brick???
aeoros said:
sorry for the delay, The phone was dead so I send it to the warranty and they send it to LG and then returned working so I just had to reroot it and update it again
Click to expand...
Click to collapse
Quote:
Originally Posted by breakercris
I've tried everything.
The phone simply doesn't connect.
USB\VID_05C6&PID_9008&REV_0000
This is what I get when I connect the phone by USB.
I just cant get into emergency, DIAG or emergency CS
KDZ the phone connects and then I get a message afterwards PHONE NOT FOUND.
everytime I install the drivers by LG support tool, it keeps giving me the option to install the driver, like I havent done it a hundred times over.
I think there should be a driver somewhere that can be installed but the only people that have this driver are LG tech's. So they can bill you after
send the phone in cause you rooted it. So the one billion dollar question is witch hero will find a way to unbrick this device. We only need a way
to get a driver to install and we are home free. Or maybe the only other option is throwing the phone for sale on internet for spare parts
HELP PLEASE HELP find a way to unbrick this phone. Believe me I flashed and bricked alot of different phones and there was a way out but in
with this phone it seems impossible!!
And there is no mode to put it in in because te volume buttons don't do crap, the home button also, the only time that the phone does show up is when windows tells me it has an unknown device that I for the love of god can't find a driver for. I tried SDK, the LG drivers, but no dice
Did you try emergency mode? (volume up + volume down + power button)
If not, see if you can enter it and then flashing your stock firmware with Software update [KDZ] 1.0.4.4 (KDZ-Flasher).
I tried to download via lg tools and flash something and failed.
when you restart the phone gave me the black screen.
I run ubuntu from the procedure
http://forum.xda-developers.com/showthread.php?t=2582142
after trying this procedure, the phone remains fixed on the lg logo.
How can I fix ??? I pray you are in a panic ...
the computer does not recognize the phone more
:crying::crying::crying::crying::crying:
What phone model do you have? Sounds like you might have to boot into download mode and use the LG tool to go back to stock completely.
greyhd said:
What phone model do you have? Sounds like you might have to boot into download mode and use the LG tool to go back to stock completely.
Click to expand...
Click to collapse
I have a d802
the phone is stuck on the lg logo.
As per the procedure would have to start the recovery but will not start.
Not part of the download mode.
I can get into factory reset but the pc does not recognize.
It seems to me a serious case. The guarantee how it behaves in these cases?
Dont you have recovery to flash new rom via ADB?
Try with ubuntu once again it will work out
ubuntu does not recognize the phone more.
The recovery is the original one.
Make sure the ports on the pc are set to 41. Do you have the drivers in the pc as well?
Sent from my VS980 4G using Tapatalk
Hello XDA-Community
Today i accidently briked my G2 (D802 KitKat 4.4.2). I was flashing it because i wanted to unroot it but during the process an error showed up and my phone was dead.
So i tried to fix it with this method http://forum.xda-developers.com/showthread.php?p=48765620#post48765620 but it didn't worked as planned.
Now i have an G2 which is stuck in a bootloop and i can't even reach the recovery or the download mode and i don't have any custom recovery installed.
Anyone who can help me with this get's an 10€/$ PSC. I can't give more because i dont have any money left (16 years old).
Big thanks to everyone who can help me with this
PS: Sorry for my bad english i'm not a native speaker
While you wait for an answer make sure your phone is kept charged.
Have you tried LG flashtool and your stock ROM?
make sure it's off, hold the VOLUME UP button while plugging it into your computer, and that should get it into download mode.
Next try using the TOT method (google it) and voila!
Yeah the problem is that i can't even reach the download mode and my computer doesn't recognize my phone it's just an qshub device. ;(
I had the same issue bricking my lg g2 and i was stuck with the logo and nothing more not even download mode,recovery etc...
The way i got it to stock was i installed the lg g2 drivers and from there on just flashed it with flashtools kdz and got it workking again i think this shoould help you out just plug your phone and install the drivers and use flashtools
Install this driver then report me back or cap screen device manager to me.I will help you for fee.
https://www.dropbox.com/s/a69s06mkpzao01m/qhsusb_bulk_DRIVER_G2.zip?dl=0
Hi All
I have LG G2 D802T (written on back of Phone) 32GB version. I want to install Android 5.0.2 as i was not getting Lollipop update so i installed Lollipop from here.
http://www.naldotech.com/flash-android-5-0-lollipop-kdz-image-lg-g2-d802/
I have followed all the steps very carefully and installation was completed successfully. Now the problem is it is stuck on LG Bootlogo and when i try to go into download mode, it takes me to Fastboot mode.
Can someone guide me in detail on how to recover my phone, which rom to install and how with links to ROM and Software, Drivers.
Would be be greatly appreciated.
Anyone?
I will reply to in this forum in a couple hours. One question. Does the pc detect your phone in fastboot at all??
Keep trying to get the phone into download mode. It took me alot of tries but i eventually got it. Then see if you can connect it to the lg support tool and run the update and it should get you back to stock android. If not, see the lg g2 unbrickable thread. Let me know how you make out.
Dylan8190 said:
I will reply to in this forum in a couple hours. One question. Does the pc detect your phone in fastboot at all??
Click to expand...
Click to collapse
Thank you very much for your efforts. Yes PC detects my phone in fastboot mode and i can also send commands through fastboot. BUT i didn't check if the phone can process on those commands or not.
Dylan8190 said:
Keep trying to get the phone into download mode. It took me alot of tries but i eventually got it. Then see if you can connect it to the lg support tool and run the update and it should get you back to stock android. If not, see the lg g2 unbrickable thread. Let me know how you make out.
Click to expand...
Click to collapse
I have tried alot of times to go into download mode but it shows download mode and goes straight to fastboot mode. Can you provide me a step by step procedure that would be of much help.
Hello guys,
So I bricked my D802 , how? first it was bricked because of a wrong version of TWRP, untill here no problem, i tried many tutorials on how to go back to stock rom, then i found that it was a Qualcom thing problem, so I found that tutorial about replacing the .img files etc... , pretty easy, i could enter the recovery menu, but it had no rom, i downloaded the stock rom kdz file , started flashing it, then, for some dumb reason the flashing stopped, I ... plug out the usb cable... I didn't notice untill I saw that the program froze, and now the phone is stuck at the LG logo, impossible to do anything, pc doesn't recognize it, can't go to recovery menu, can someone help me please? or at least tell me if I should just throw that phone or keep it if it has a chance of living a bit longer
Kicha0 said:
Hello guys,
So I bricked my D802 , how? first it was bricked because of a wrong version of TWRP, untill here no problem, i tried many tutorials on how to go back to stock rom, then i found that it was a Qualcom thing problem, so I found that tutorial about replacing the .img files etc... , pretty easy, i could enter the recovery menu, but it had no rom, i downloaded the stock rom kdz file , started flashing it, then, for some dumb reason the flashing stopped, I ... plug out the usb cable... I didn't notice untill I saw that the program froze, and now the phone is stuck at the LG logo, impossible to do anything, pc doesn't recognize it, can't go to recovery menu, can someone help me please? or at least tell me if I should just throw that phone or keep it if it has a chance of living a bit longer
Click to expand...
Click to collapse
This guide is pretty good.
https://forum.xda-developers.com/lg-g2/help/noob-friendly-recovery-download-mode-t3112805
Jan Philipp said:
This guide is pretty good.
https://forum.xda-developers.com/lg-g2/help/noob-friendly-recovery-download-mode-t3112805
Click to expand...
Click to collapse
I forgot to add this:
For D800:
Master archive of 5 files needed to do this:
https://www.androidfilehost.com/?fid=95747613655047114
Just had the same issue and answered in another thread but I'll quote myself again.
https://forum.xda-developers.com/sho....php?t=2663369
https://www.youtube.com/watch?v=Lg693AYgoTo
ATT 4.4.2 KitKat:
https://mega.nz/#!n0RTUYZD!MVntiPxuyW...
ATT 4.2.2 JellyBean:
https://mega.nz/#!e5RERS4L!FjZyopcvwM...
T-Mobile 4.2.2 JellyBean:
https://mega.nz/#!qsRSBDwD!KKCETp41O1...
Modified DLL file if nothing else works:
https://mega.nz/#!f5xTGKrC!ifBCOAnK4j...
I had a very similar problem with it getting stuck at the logo after pushing supersu to the phone. I followed Supersport every single step of the way in his video. I think his links are the only valid ones online now, so just download them and reflash your phone. If your G2 is anything like mine, drivers will never appear to be installed correctly and it never restarts, only shuts down.
His method is:
1) Download and install LG drivers on PC
2) Download and install the flash tool and patch it
3) Download and load the .tot and .dll files into the flash tool
4) Enter download mode on G2 by holding volume up while connecting USB
5) Switch G2 Com port to 41 in device manager
6) Once Flash tool shows that all ports are ready, power down G2 and disconnect
7) Hold volume up and reconnect to get back into download mode
8) LG Flash tool starts flashing
9) Complete
Note: If your G2 was screwed up as bad as mine, it'll say failed but all the main system files will load to the device before it restarts and it'll even shut itself off while doing it's installation on first reboot. Mine somehow was still revived from this state with his method.