MiFlash issue - ZTE Axon 7 Questions & Answers

Hi, i have an A2017G device with a 7.1.1 stock rom. (no TWRP, no ROOT, nothing!)
I am trying to unlock the bootloader in order to flash a custom rom but MiFLash doesn't detect my device while in EDL mode (adb reboot edl, 15 Seconds ADB installed).
In device manager it is named as QUSB-BULK.
Can someone help me?
Thanks

As far as I know you need Qualcom HS-USB QDLoader 9008 for MiFlash (not really sure though), but give this a try. Right click the QUSB-BULK>Update driver>Browse my comp...>Let me pick...> then pick Qualcom HS-USB QDLoader 9008 if you see it and click next. Also have you tried installing drivers from MiFlash just incase?

Nicz14 said:
As far as I know you need Qualcom HS-USB QDLoader 9008 for MiFlash (not really sure though), but give this a try. Right click the QUSB-BULK>Update driver>Browse my comp...>Let me pick...> then pick Qualcom HS-USB QDLoader 9008 if you see it and click next. Also have you tried installing drivers from MiFlash just incase?
Click to expand...
Click to collapse
Solved:
It was an issue related with drivers/windows 10, i tried using windows 7, same steps, and while in edl mode it was named Qualcom HS-USB QDLoader 9008, then it worked.
PS: installing drivers from MiFlash didn't solve the issue while in windows 10.
Thanks

Related

Wileyfox Storm stuck in DFU/EDL mode

Hello Everyone. I got my old Storm out and tried to boot it. No fastboot menu, fastboot or ADB access possible, no boot to TWRP either.
The Windows 10 Device Manger shows it as Qualcomm HS-USB QDLoader 9008.
So, I launched Qualcomm QFIL and its there. Now all I need are the relevant eMMC, xml and such like files. Are there such files for the phone?
I have some experience of this because I had similar problems a long time back with my AXON 7 (which is running pie now, . If I can't get my old Storm going then its the parts bin for it.

[GUIDE] Unbrick MI5S

Hi,
recently I hardbricked mi Mi5s. After reading and trying a lot of things, I managed to unbrick it. So, I left this as a guide of things to try in case someone else hardbricks it.
How did I brick it:
I was trying to fix finger sensor by flashing in EDL mode fastboot ROMS, in order to reflash persistent.img . I accidentally flashed a mi5 (gemini) ROM on the mi5s. After that, the PC recognised the device only as "hs-usb qdloader 9008" in the Windows Device Manager, associated with a COM port. (In my pc, it was COM7 or COM8).
How did I unbrick it:
I disabled integer_checks (following the androidbrick guide provided below) and installed new driver for qdloader 9008.
After that, I used miFlashTool (https://www.xiaomiflash.com/download/) and flashed latest global stable fastboot rom (https://en.miui.com/thread-5927598-1-1.html)
Note: if miFlashTool crashes, create a folder in miflash folder, and rename it to "log".
If you don't have a unlocked bootloader, you *must* use the test-point trick. (Use a deep flash cable) .
Links:
Driver that worked: https://www.mediafire.com/file/so0uvkd6nm6ie1m/Driver_x64.cab/file (x64) & https://www.mediafire.com/file/ryjc83s2ku6mmh5/Driver_x86.cab/file (x86)
Although it didn't work for me (i suspect thats becouse i hadn't installed the driver above), guide to use Qualcomm QFIL: https://en.miui.com/thread-432217-1-1.html
Another guide to Qualcomm QFIL: https://www.androidbrick.com/ultima...s-are-unbrickable-qhsusb_dload_qpst_qfil_edl/
If the PC doens't detect the mobile after installing that driver, it means that you're NOT into EDL mode. If you can't enter fastboot or EDL mode, you need a Deep flash cable. You can fabricate yourself one (there are youtube tutorials for that) using a test-point , or you can buy one from Aliexpress: https://es.aliexpress.com/item/PHON...290.html?spm=a2g0s.9042311.0.0.594263c0eXl7Lh
Guide to understand how EDL works and how to exploit it: https://alephsecurity.com/2018/01/22/qualcomm-edl-1/
Other useful links: https://forum.xda-developers.com/mi-5s/help/stupid-mistake-mi5s-bricked-t3725331
Other useful links: https://www.youtube.com/watch?v=Ds2Bp2TBizc
Other useful links:https://www.htcmania.com/showthread.php?t=1204227&page=5 (Spanish post)
Other useful links: https://www.youtube.com/watch?v=Mp_VdEqi0rc
Good luck!
Thank you for this great guide. Have a good day
is you fingerprint works after edl flashing?
Fastboot is no longer displayed, the screen remains dark. But I hear that the device is recognized. I use a depp flash cable.
MiFlash 20191206
port 9
status: try to reset status
after 18 sec flashmessage: write time out, maybe device was disconnected.

[HELP] LG G6(H870) block to boot

Hello,
I tried to install a new ROM on my phone (for the first time).
I unlock it with (unlock.bin) and checked with adb command if it is unlocked.
I installed TWRP. I boot myphone in factory mode, and TWRP started. But I failed install to ROM...
So now I have a problem :
If I try to access to TWRP : I boot in factory mode, select "yes" twice, and my phone boot a second time again and lock on the screen "LG".
I told me I can reinstall it with adb, but adb can't see phone connected on my computer (because no os)
Do you have a solution ?
https://forum.xda-developers.com/lg-g6/how-to/lg-g6-unbrick-method-t3935924
Android# said:
https://forum.xda-developers.com/lg-g6/how-to/lg-g6-unbrick-method-t3935924
Click to expand...
Click to collapse
Thank you for the link. I don't understand step 2 :
Step 2) Install QDLoader Driver (Select the driver for your system, 32 or 64-bit)
Use The new Signed driver.
in the archive(download in google drive) I don't found the exe, so I download and install QDLoader driver from internet.
But what does that mean "use the new signed driver" ? edit: how I use (NEW)(Signed)9008 Drivers.rar ?
edit: In my driver management I didn't see Qualcom HS-USB
GameKoyColor said:
Thank you for the link. I don't understand step 2 :
Step 2) Install QDLoader Driver (Select the driver for your system, 32 or 64-bit)
Use The new Signed driver.
in the archive(download in google drive) I don't found the exe, so I download and install QDLoader driver from internet.
But what does that mean "use the new signed driver" ? edit: how I use (NEW)(Signed)9008 Drivers.rar ?
edit: In my driver management I didn't see Qualcom HS-USB
Click to expand...
Click to collapse
Sorry for late reply. If I remember correctly, phone has to be connected to the computer in EDL mode for you to see the Qualcom HS-USB. Also, you just unzip the .rar file and driver is there. Sorry, I did this long time ago and I think once I connected the phone in EDL mode with the PC, it showed up in device manager and I installed the driver to it.

ZTE axon 7 A2017U

ZTE AXON 7 You have replaced the aboot file by TWRP and signed in the wrong and die problem except to enter EDL mode and do not boot an ADB
can you help me
Use an EDL full image with the EDL Tool:
Axon 7 EDL Tool - Flash / Backup / Restore / Unlock in the EDL mode
Axon 7 EDL Tool BAT-program for Flash / Backup / Restore / Unlock the phone in EDL mode Qualcomm HS-USB QDLoader 9008 (COM ...) !!! Whatever you do, you do at your own risk !!!" !!! If you are not sure of yourself do not use this program ...
forum.xda-developers.com
Everything you need is in that thread.

Question EDL 9008

The phone started updating from 1.1.6 to 1.1.7 by the standard means of updating, but now it does not turn on, when connected, the Qualcomm HS-USB QDLoader 9008 device appears. I tried to restore the phone via fastboot, but it is not visible, miflash sees it and com10. I tried to insert my fastboot script into miflash, but it doesn't work. I think it is possible to use some mbn files, but I don't have them
Your phone is in EDL Mode (bricked).
Fastboot won't work in this mode.
You need a loader / programmer file for Qfil (Windows) / EDL (Linux) and restore files or a Backup.
I haven't found a working loader / programmer file for now...
Maybe we need a patched / signed file...
denndenn said:
You need a loader / programmer file for Qfil (Windows) / EDL (Linux) and restore files or a Backup.
Click to expand...
Click to collapse
Where to find them?
JI3M0H said:
Where to find them
Click to expand...
Click to collapse
Only Nothing have this, i think...

Categories

Resources