Question EDL 9008 - Nothing Phone 1

The phone started updating from 1.1.6 to 1.1.7 by the standard means of updating, but now it does not turn on, when connected, the Qualcomm HS-USB QDLoader 9008 device appears. I tried to restore the phone via fastboot, but it is not visible, miflash sees it and com10. I tried to insert my fastboot script into miflash, but it doesn't work. I think it is possible to use some mbn files, but I don't have them

Your phone is in EDL Mode (bricked).
Fastboot won't work in this mode.
You need a loader / programmer file for Qfil (Windows) / EDL (Linux) and restore files or a Backup.
I haven't found a working loader / programmer file for now...
Maybe we need a patched / signed file...

denndenn said:
You need a loader / programmer file for Qfil (Windows) / EDL (Linux) and restore files or a Backup.
Click to expand...
Click to collapse
Where to find them?

JI3M0H said:
Where to find them
Click to expand...
Click to collapse
Only Nothing have this, i think...

Related

hard bricked yotaphone 2

Hi, i was playing with my yota2 and think i messed up the radio files, now the phone is dead, no vibration no screen light, nothing.
i tried some methods and was able to get the phone recognized as 'Qualcomm HS-USB QDLoader 9008' but dont know what to do. btw i opened up the phone, is there anyway to revive it or should i just order another one?
Thanks alot
Try flashing it with yotaflasher. Post any errors if they occur.
Hi
My phone does not get recognized. When trying to use yotaflasher it is stuck at 'waiting for device'
yotafree said:
Hi
My phone does not get recognized. When trying to use yotaflasher it is stuck at 'waiting for device'
Click to expand...
Click to collapse
Your adb drivers are not loaded on your laptop/PC , there are many threads about this on here. You cannot do a fastboot flash without these drivers.
Run an adb command from a DOS "cmd" window on your laptop to check this, this is explained on here.
i had a hardbrick yotaphone2 also. only qualcomm 9008 detected. had tried all the way to flash it back due to wrong rom being flashed. please advice....no fastboot, tried power off and volume down, tried kick out from EDL mode...tried qualcomm flasher which support EDL flashing but downloaded rom cannot flash due to only img and bin file, there is no rawprogram xml file.....anybody have dumped rom for this phone?
Thank you but did you forget to add the link which command to run ??
Parmo100 said:
Your adb drivers are not loaded on your laptop/PC , there are many threads about this on here. You cannot do a fastboot flash without these drivers.
Run an adb command from a DOS "cmd" window on your laptop to check this, this is explained on here.
Click to expand...
Click to collapse
Thank you but did you forget to add the link which command to run ??

Hell to unlock Bootloader Please...

Hi there,
i'd Like to flash the Ressurection Remix Oreo Rom, but i don't get it to unlock the bootloader. I'm on Stock A2017GV1.2.0B10 Nougat. TWRP and Backups are done, but when i try to unlock the Bootloader i geht this message in cmd:
adb: error: connect failed: no devices/emulators found
Tried with Zadigs Drivers, ADB divers are installed and it is showed as QS_Bulk.
Are there still some drivers missing or what am I doing wrong there???
Did you enable USB Debugging on your phone?
Victor13f said:
Did you enable USB Debugging on your phone?
Click to expand...
Click to collapse
Yes, i have OEM unlock and USB Debugging enabled. Dont understand why this is not working at all. Tried it many times, but every Try I get this message in the CMd. Sideload isn't working too...
Have you installed the Google USB drivers and checked in Device manager if everything is working okay? Here's a link to a guide: https://www.drivereasy.com/knowledge/solved-adb-device-not-found-error-on-windows/
HeikoNote3 said:
Yes, i have OEM unlock and USB Debugging enabled. Dont understand why this is not working at all. Tried it many times, but every Try I get this message in the CMd. Sideload isn't working too...
Click to expand...
Click to collapse
Just use the EDL Tool from @djkuz, install it, put your phone into EDL mode and unlock.
https://forum.xda-developers.com/axon-7/development/axon-7-edl-tool-flash-backup-restore-t3750759
raystef66 said:
Just use the EDL Tool from @djkuz, install it, put your phone into EDL mode and unlock.
https://forum.xda-developers.com/axon-7/development/axon-7-edl-tool-flash-backup-restore-t3750759
Click to expand...
Click to collapse
So, Tried this one too. Doesn't work, phone isn't found, error adb interface not found...
HeikoNote3 said:
So, Tried this one too. Doesn't work, phone isn't found, error adb interface not found...
Click to expand...
Click to collapse
Uninstall all drivers you see relating to your phone (adb, usb...)
Try install : http://adbdriver.com/downloads/
And https://androidfilehost.com/?fid=24588232905723896
And see if you can perform with the EDL Tool again or adb
raystef66 said:
Uninstall all drivers you see relating to your phone (adb, usb...)
Try install : http://adbdriver.com/downloads/
And https://androidfilehost.com/?fid=24588232905723896
And see if you can perform with the EDL Tool again or adb
Click to expand...
Click to collapse
Installed the ADB Drivers but in EDL tool the Phone is not recognised. Dont know what could the Problem...
HeikoNote3 said:
Installed the ADB Drivers but in EDL tool the Phone is not recognised. Dont know what could the Problem...
Click to expand...
Click to collapse
First boot into twrp, connect your phone, run the EDL Tool. Normaly the tool should reboot itself into EDL mode
Or try : run EDL tool, instead of power off phone, hold vol down+power, connect usb, just do the same by holding the 3 buttons ( i did that once when my phone was in a state of 'shock' and the 2 button way didn't work)
Btw, did you install the 2 drivers i gave you ?
raystef66 said:
First boot into twrp, connect your phone, run the EDL Tool. Normaly the tool should reboot itself into EDL mode
Or try : run EDL tool, instead of power off phone, hold vol down+power, connect usb, just do the same by holding the 3 buttons ( i did that once when my phone was in a state of 'shock' and the 2 button way didn't work)
Btw, did you install the 2 drivers i gave you ?
Click to expand...
Click to collapse
Yes they're installed. I'm wondering that edl tool shows first ZTE ADB handset etc. And after boot into edl mode it shows no ADB interface... With axon7tool I can choose unlock Bootloader, then MI flash starts and then I don't know the files to flash for an unlock...
HeikoNote3 said:
Yes they're installed. I'm wondering that edl tool shows first ZTE ADB handset etc. And after boot into edl mode it shows no ADB interface... With axon7tool I can choose unlock Bootloader, then MI flash starts and then I don't know the files to flash for an unlock...
Click to expand...
Click to collapse
MiFlash? Where did you read that you had to use MiFlash? ?
You need to use EDL Tool
Edit: Okay, I think I got it. You thought "EDL Tool" was actually axon7toolkit. Well, it isn't. Axon7toolkit, axon7tool, and EDL Tool are 3 different things
Choose an username... said:
MiFlash? Where did you read that you had to use MiFlash?
You need to use EDL Tool
Edit: Okay, I think I got it. You thought "EDL Tool" was actually axon7toolkit. Well, it isn't. Axon7toolkit, axon7tool, and EDL Tool are 3 different things
Click to expand...
Click to collapse
OK, then which tool should I prefer now? In EDL tool I was on a good way to unlock the Bootloader, but when I choose Yes, the unlock begins with load programmer something and stucks until I reboot EDL mode. Then it gives me an error message with: your device could be in Sahara mode. I don't understand anything anymore. Tried every driver, every tool but nothing will work. That drives me crazy...
HeikoNote3 said:
OK, then which tool should I prefer now? In EDL tool I was on a good way to unlock the Bootloader, but when I choose Yes, the unlock begins with load programmer something and stucks until I reboot EDL mode. Then it gives me an error message with: your device could be in Sahara mode. I don't understand anything anymore. Tried every driver, every tool but nothing will work. That drives me crazy...
Click to expand...
Click to collapse
Did you enable OEM unlock and USB debugging?
If you did and it still does that error, just use the manual method and follow Controllerboy's guide. That one uses axon7tool, which is much more finicky and ran by commands, but it works
Thanks for all Tipps. Finally did it. Running RR Oreo!

your device is corrupted and cannot be trusted and may not work properly

Hi all, I ended up with this:
"your device is corrupted and cannot be trusted and may not work properly"
I can access Fastboot mode but can't flash any TWRP
Any help?
I tried to install LOS with Universal Bootstack...and Axon 7 Tool open a window just for one second so I can't access the command
amus76 said:
Hi all, I ended up with this:
"your device is corrupted and cannot be trusted and may not work properly"
I can access Fastboot mode but can't flash any TWRP
Any help?
I tried to install LOS with Universal Bootstack...and Axon 7 Tool open a window just for one second so I can't access the command
Click to expand...
Click to collapse
All right, do this:
-Put the phone in Fastboot
-Open command prompt
-Run "fastboot erase userdata"
If it doesn't work, do this:
-Set up a TWRP on your fastboot folder (rename it to "recovery.img" [BE SURE THAT YOUR PC SHOWS FILE NAME EXTENSIONS] and put it on the folder where fastboot is located)
-Open command prompt in the folder where Fastboot is located
-Run this command:
fastboot boot recovery.img
Your phone should enter TWRP. It's not installed, it just boots it once.
Then try to format data from TWRP. Right after that, use "adb push recovery.img /sdcard" to push the recovery img to your internal storage. Then go (on your twrp) to "Install" - hit "Install image", then select the recovery.img, and select "recovery" and swipe to confirm.
After it is done, install LOS again. If it is 15.1 or 16 you have to have a Vendor compatible TWRP, such as Ordenkrieger's TWRP (From LOS16 thread). Follow the instructions precisely
As soon as TWRP is flashed, i get the warning screen with : "your device is corrupted and cannot be trusted and may not work properly"
And no recovery then after reboot
No FTM mode and I can't enter EDL
And I have to say my device is recgnised as DFU by the PC so maybe trying the EDL cable?
amus76 said:
As soon as TWRP is flashed, i get the warning screen with : "your device is corrupted and cannot be trusted and may not work properly"
And no recovery then after reboot
No FTM mode and I can't enter EDL
And I have to say my device is recgnised as DFU by the PC so maybe trying the EDL cable?
Click to expand...
Click to collapse
yes, an edl cable might work. Otherwise I think you can get some fastboot images and attempt to install them to the right locations
Did you do "fastboot boot recovery.img"? It shouldn't reboot the phone. TWRP should appear right after the transfer is done
If you still have access the fastboot
Enter, reboot dm-verity enforcing
Check here
https://forum.xda-developers.com/axon-7/development/unofficial-lineageos-15-1-zte-axon-7-t3800214
Choose an username... said:
yes, an edl cable might work. Otherwise I think you can get some fastboot images and attempt to install them to the right locations
Did you do "fastboot boot recovery.img"? It shouldn't reboot the phone. TWRP should appear right after the transfer is done
Click to expand...
Click to collapse
I did the fastboot boot recovery.img the phone reboot, i get the warning screen for unlocked bootloader and straight after "your device is corrupted and cannot be trusted and may not work properly" with the same style as the bootloader warninr screen.
So without a recovery I can't flash fastboot images
For those in my case:
When you get the warning screen with the red message, just push once the button power, a Linux logo will appear, and another push on the button will boot you in TWRP
I didn't manage to get the command to work : adb reboot "dm-verity enforcing", I tried Terminal in TWRP but with no luck.
Did you get access to Edl mode, via button combo or through adb?
If not can you get to the FTM screen?
I know you couldn't access these earlier, has that changed?
Also what apps do you have?
Edl tool?
Axon 7 tool kit (you did mention this)
Miflash?
Qualcomm drivers and Zadig drivers?
Syberclone said:
Did you get access to Edl mode, via button combo or through adb?
If not can you get to the FTM screen?
I know you couldn't access these earlier, has that changed?
Also what apps do you have?
Edl tool?
Axon 7 tool kit (you did mention this)
Miflash?
Qualcomm drivers and Zadig drivers?
Click to expand...
Click to collapse
I didn't get access to EDL mode even through ADB, nor FTM screen. So MiFlash is useless
With Axon 7 tool, I tried to flash TWRP with no success, my phone was on DFU
Then I managed to dm-verity encrypted through ADB but the phone was not rebooting on recovery, still fastboot but the phone was not recognize by the PC
I have Qualcomm Drivers installed
Right now with Lineage, I can't acces FTM screen
I just pushed the button twice when I was with the red warninr screen and get access to TWRP (or Lineage boot screen)
Try installing the Zadig drivers and the bulk USB drivers for the axon to help detect the correct device.
Then see if the Axon tool kit will work properly.
DFU mode shows for a number of reasons.
In your windows device manager it needs to show
"Qualcomm HS-USB QDLoader 9008" if all drivers are setup properly.
When I soft bricked mine I was trying to install Los 15.1
I had the corrupt device message you are getting.
I used all 3 apps to eventually get mine running.
I made sure all drivers were installed and up to date, I switched between the Axon tool kit, edl tool and Miflash to get my laptop to recognise.
I ran the Axon tool kit to setup adb (a few attempts before it worked)
I then ran Edl tool to get some form of Edl
Then ran Miflash (latest version) I had to try this several times too (constant error messages) it finally started the flash process but would fail (I was using the turkdev edl)
I swapped it for the B12 Edl on Raystefs page and it worked, I then had to reflash with the correct modem though.
Anyway I truly hope you get it sorted
Syberclone said:
Try installing the Zadig drivers and the bulk USB drivers for the axon to help detect the correct device.
Then see if the Axon tool kit will work properly.
DFU mode shows for a number of reasons.
In your windows device manager it needs to show
"Qualcomm HS-USB QDLoader 9008" if all drivers are setup properly.
When I soft bricked mine I was trying to install Los 15.1
I had the corrupt device message you are getting.
I used all 3 apps to eventually get mine running.
I made sure all drivers were installed and up to date, I switched between the Axon tool kit, edl tool and Miflash to get my laptop to recognise.
I ran the Axon tool kit to setup adb (a few attempts before it worked)
I then ran Edl tool to get some form of Edl
Then ran Miflash (latest version) I had to try this several times too (constant error messages) it finally started the flash process but would fail (I was using the turkdev edl)
I swapped it for the B12 Edl on Raystefs page and it worked, I then had to reflash with the correct modem though.
Anyway I truly hope you get it sorted
Click to expand...
Click to collapse
Thanks a lot, I have it sorted!
But what strange is a lot of people is facing this problem recently in a short time
amus76 said:
Thanks a lot, I have it sorted!
But what strange is a lot of people is facing this problem recently in a short time
Click to expand...
Click to collapse
Can I ask how you got it fixed? I would be handy to know for others that end up in this position.
Syberclone said:
Can I ask how you got it fixed? I would be handy to know for others that end up in this position.
Click to expand...
Click to collapse
Just with "dm-verity enforcing" with ADB
Then: press button power when on the red warning, a pinguin will appear and again press the power button, it will reboot on TWRP or Lineage
My fasbtoot was inefficient a part for the dm-verity enforcing, no FTM also
amus76 said:
For those in my case:
When you get the warning screen with the red message, just push once the button power, a Linux logo will appear, and another push on the button will boot you in TWRP
I didn't manage to get the command to work : adb reboot "dm-verity enforcing", I tried Terminal in TWRP but with no luck.
Click to expand...
Click to collapse
I know this is an old reply, but I arrive from a google search. Sir, thanks a lot for this reply. I was stuck in your same situation and pressing the power button with the linux icon allowed me to go to TWRP. THANKS!
I get the pinguin, but if i press Power again, nothing happened. I have to wait for a while it reboots to System. I tried to hold Power while it is rebooting, but it always reboots to System. No chance to enter twrp...

Need some help after messing up my Lineage OS installation on A2017U

My phone has no OS. Factory reset is unavailable to my knowledge (attempted volume up and power).
I can go into fastboot and TWRP, but I can't seem to install the stock OS nor Lineage OS. In fastbootmode, I see the following
Product name - AILSA_II
Variant - MTP eMMC
Bootloader version -
Baseband Version -
Serial Number 9e28c2da
Secure Boot - enabled
Device State - unlocked
Click to expand...
Click to collapse
I cannot use ADB commands. My phone isn't listed under ADB devices. EDL does not work. However in Fastboot mode, MiFlash recognizes a device 9e28c2da. Whenever I try to flash a full EDL however, miflash brings up errors saying it cannot find script and it cannot find file.
When attempting to install in TWRP, I get the respective errors "Invalid zip file format!" for "A2017U_B19-NOUGAT_FULL-EDL.zip" when I try to install the stock. When I try to install Lineage, I get "E3004L This package is for device: ailsa_ii,axon7; this device is ."
I am able to successful install A7LOSv1_UniversalBootStack.zip as well as the UniversalBootstack by DrakenFX. I then install OreoModem.zip after that, but the phone won't let me install any OS afterwards.
Am I trying to install the wrong arrangement of files? What can I do to get an OS back on my phone?
Firstly it sounds like the drivers need an update.
Try updating the USB drivers and try Zadig drivers as well.
Your PC/laptop should see your phone as ...
"Qualcomm HS-USB QDLoader 9008"
In the device manager on Windows. If you are using Miflash it should see it as Com 4 or similar.
Make sure you have the correct Edl package for your phone eg: A2017G, A2017U or A2017.
Extract the Edl package using WinZip or Winrar and take note of the folder name and location.
Boot your phone into Edl mode, via button, adb command or using the Edl tool by @djkuz
Open Miflash tap refresh, if it sees com4 or similar you are good to go.
Tap the browse button and pick the Edl package location on your PC/laptop and then tap flash.
The flash will take a few minutes and when done you will get a green flash success.
Unplug your phone and press and hold the power button till it boots.
Hope this helps
If you get stuck,
I have an Edl help page here >
https://forum.xda-developers.com/axon-7/help/bad-flash-help-page-axon-7-t3839700
There are many others on XDA too

Oneplus 8 pro bricked sort of but can't seem to find an option to revert it

I was having issues with the android 11 so thought to downgrade. Since the system wouldn't allow me to do it from the local storage, I thought I will just install TWRP and then flash the OS that way but in the process, I don't know what went wrong but fastboot will flash the recovery but when I tried to boot to it with the command it put me to Qualcomm crash dump mode. I downloaded the MSM Tool as I have gone through this process before but for the millionth time, I just can't put my phone to EDL mode. Every time I try with the volume up+volume down, keep pressing it until I plug the cable into it, the phone just goes to fastboot mode.
TL;DR - only have access to fastboot, no recovery, can't even install recovery because of crashdump issue. Phone not entering into EDL mode tried pushing it from fastboot to EDL using commands but doesn't work. Since it is at fastboot every time, device manager sees it as android bootloader platform. Device manager sees it as Qualcomm HS-USB Diagnostics 900E.
I've almost tried everything and I know device manager is supposed to see the device as 9008 for the MSM tool to work but it is NOT GOING INTO EDL MODE!!!!!
*sigh* any help will be really appreciated guys. Thank you.
Shubham1211 said:
I was having issues with the android 11 so thought to downgrade. Since the system wouldn't allow me to do it from the local storage, I thought I will just install TWRP and then flash the OS that way but in the process, I don't know what went wrong but fastboot will flash the recovery but when I tried to boot to it with the command it put me to Qualcomm crash dump mode. I downloaded the MSM Tool as I have gone through this process before but for the millionth time, I just can't put my phone to EDL mode. Every time I try with the volume up+volume down, keep pressing it until I plug the cable into it, the phone just goes to fastboot mode.
TL;DR - only have access to fastboot, no recovery, can't even install recovery because of crashdump issue. Phone not entering into EDL mode tried pushing it from fastboot to EDL using commands but doesn't work. Since it is at fastboot every time, device manager sees it as android bootloader platform. Device manager sees it as Qualcomm HS-USB Diagnostics 900E.
I've almost tried everything and I know device manager is supposed to see the device as 9008 for the MSM tool to work but it is NOT GOING INTO EDL MODE!!!!!
*sigh* any help will be really appreciated guys. Thank you.
Click to expand...
Click to collapse
Flash your stock recovery back! Twrp is not A11 compatible
Shubham1211 said:
I was having issues with the android 11 so thought to downgrade. Since the system wouldn't allow me to do it from the local storage, I thought I will just install TWRP and then flash the OS that way but in the process, I don't know what went wrong but fastboot will flash the recovery but when I tried to boot to it with the command it put me to Qualcomm crash dump mode. I downloaded the MSM Tool as I have gone through this process before but for the millionth time, I just can't put my phone to EDL mode. Every time I try with the volume up+volume down, keep pressing it until I plug the cable into it, the phone just goes to fastboot mode.
TL;DR - only have access to fastboot, no recovery, can't even install recovery because of crashdump issue. Phone not entering into EDL mode tried pushing it from fastboot to EDL using commands but doesn't work. Since it is at fastboot every time, device manager sees it as android bootloader platform. Device manager sees it as Qualcomm HS-USB Diagnostics 900E.
I've almost tried everything and I know device manager is supposed to see the device as 9008 for the MSM tool to work but it is NOT GOING INTO EDL MODE!!!!!
*sigh* any help will be really appreciated guys. Thank you.
Click to expand...
Click to collapse
pyry666 said:
Flash your stock recovery back! Twrp is not A11 compatible
Click to expand...
Click to collapse
Yes and next time you should better read the threads.
pyry666 said:
Flash your stock recovery back! Twrp is not A11 compatible
Click to expand...
Click to collapse
OMG...how did this slipped through my mind. Damn thank you for this.
Kollachi said:
Yes and next time you should better read the threads.
Click to expand...
Click to collapse
I read many threads dear sir but this point totally slipped my mind about the android. Really appreciate the tip. Thank you.
pyry666 said:
Flash your stock recovery back! Twrp is not A11 compatible
Click to expand...
Click to collapse
ok but how do I flash my stock recovery back?
since the only thing I can access is fastboot mode, I tried flashing a stock fastboot rom but that clearly states that it cant be used to downgrade and currently there are no android 11 fastboot rom available so now what am I supposed to do wait?
Shubham1211 said:
ok but how do I flash my stock recovery back?
since the only thing I can access is fastboot mode, I tried flashing a stock fastboot rom but that clearly states that it cant be used to downgrade and currently there are no android 11 fastboot rom available so now what am I supposed to do wait?
Click to expand...
Click to collapse
Dl your current full rom and extract it from it using payload dumper. There are step by step guides how to do this
pyry666 said:
Dl your current full rom and extract it from it using payload dumper. There are step by step guides how to do this
Click to expand...
Click to collapse
I just did this. So what I did was since there were fastboot stock roms available but not for android 11, I downloaded one...ran it through payload dumper and copied these files to overwrite the one from 10.5.13. But when I did that and everything went 100% as it should. My phone was not turning on now...no response on button presses and no sound when connected to computer...I thought did I really became the first one to hardbrick a oneplus....then I just checked in device manager and it was showing as 9008 at the end..which meant it is EDL mode...that was exactly what I wanted. I immediately started MSM Tool and there it was then I just started and now my phone is back to normal along woth having OOS 10.5.13 exactly what I wanted so thank you for pointing my foolish mistake.
Just replying here because this was the only google result when searching the error messages. I could only get into fastboot, no edl, and recovery gave the error message about download mode. I noticed when holding both buttons down and plugging in it would come up as the Qualcomm USB thing 9008, but every 10s it would reboot again and if I wasn't holding the keys go into fastboot. The solution was...
Have the MSM tool started and ready
In the 5-10s you have while the device shows as Qualcomm USB (QUSB 9008 something) hit the start button
This kept it in that mode and although the screen never showed anything it went through the 300s restore and I was back to stock.
Danmanlott said:
Just replying here because this was the only google result when searching the error messages. I could only get into fastboot, no edl, and recovery gave the error message about download mode. I noticed when holding both buttons down and plugging in it would come up as the Qualcomm USB thing 9008, but every 10s it would reboot again and if I wasn't holding the keys go into fastboot. The solution was...
Have the MSM tool started and ready
In the 5-10s you have while the device shows as Qualcomm USB (QUSB 9008 something) hit the start button
This kept it in that mode and although the screen never showed anything it went through the 300s restore and I was back to stock.
Click to expand...
Click to collapse
Bare in mind that EDL mode doesn't last very long (least it didn't for me)
So make sure you're ready to press start on MSM, once the process has initialized it'll keep it in that mode.
Found it out by trial and error. I too thought I couldn't get into EDL but it's probably the last thing that would fail on the phone, if fast boot is working then EDL almost certainly is too.

Categories

Resources