Database Users

Rebooting to Bootloader doesnt work. ZUK Logo appears and seems like frozen

Hello Guys,
i have a Problem with this Handy. It was stuck in a Bootloop for two days then i tried to flash with a cm rom but appearently it didnt worked and messed up the Fastbootmode. Today i successfully restored my Z1 with the QPST Software but the Bootloader still wont work. Can someone tell me how to fix this? Because i want to install a other rom (current rom displays a watermark like thing on the screen).
Thanks and have a nice day

same problem here .
Toastbrotstern said:
Hello Guys,
i have a Problem with this Handy. It was stuck in a Bootloop for two days then i tried to flash with a cm rom but appearently it didnt worked and messed up the Fastbootmode. Today i successfully restored my Z1 with the QPST Software but the Bootloader still wont work. Can someone tell me how to fix this? Because i want to install a other rom (current rom displays a watermark like thing on the screen).
Thanks and have a nice day
Click to expand...
Click to collapse
plz tell me how u used qpst software to recover your phone

mmprknown said:
plz tell me how u used qpst software to recover your phone
Click to expand...
Click to collapse
well i just followed a tutorial in youtube since it didnt worked with the adb sideload.
i just connected my z1 while holding volume up so that the software can recognize it. Then i loaded the qualcomm firmware and selected the xml of the tutorial with a recovery.img. After that i just clicked download and it worked again.... except i cant get to the bootloader. My thoughts are that i somehow ripped/deinstalled the bootloader.

Huawei p9 lite bricked, no fastboot, unlocked and stucked on boot....

Hello,
I am from Greece and Ive bought from Vodafone a Huawei P9 lite vns-l21 before one month. Ive installed the nougat rom 370 with firmware finder but I made a mistake choozing the NRD-90M test key. So I begun to roll back to Marshmallow. Everything ok. Then Itried to install an other rom from firmware finder(i think C432b371) and again NRD-90M test key...
Again roll back to Marshmallow...so in the first step when i was trying to install with dload method the Huawei P9 Lite Rollback Package For L21C432 (EU) my phone stucked on boot loop but I had fastboot. Then I have unlocked the bootloader to see if there is anything that i can do with srk tool and now i have a beautifull bricked phone stuck :
"Your device has been unlocked and can't be trusted.
you device is booting now"
In this point nothing happens, I can not go to fast boot, No recovery mode, The hardware keys not doing anything, only resetting the phone in loop..
I dont know what to do and Huawei wants 215euro to fix my phone.
My mistake I know but is there enything that i can do know? Its a new phone!
Sorry for my english

I would suggest getting an sdcard and creating a dload folder inside, then putting an official rom UPDATE.APP file inside the dload folder and try 3button method

o-w-a said:
I would suggest getting an sdcard and creating a dload folder inside, then putting an official rom UPDATE.APP file inside the dload folder and try 3button method
Click to expand...
Click to collapse
Thanks for the advice but I have already tried that with stock rom B161 and nothing happens with 3 button method. Still in the same situation.. Everything i do with the buttons the phone resetting and stays on until the battery is dead..

ioanpara said:
Thanks for the advice but I have already tried that with stock rom B161 and nothing happens with 3 button method. Still in the same situation..
Click to expand...
Click to collapse
do you get verification error or is it just stuck at "your devices is booting now"

o-w-a said:
do you get verification error or is it just stuck at "your devices is booting now"
Click to expand...
Click to collapse
Stuck on "your device is booting now".

ioanpara said:
Stuck on "your device is booting now".
Click to expand...
Click to collapse
As far as I understand, you can't even power off your device which is a problem since the 3button method won't work if you can't power off the device.

o-w-a said:
As far as I understand, you can't even power off your device which is a problem since the 3button method won't work if you can't power off the device.
Click to expand...
Click to collapse
Exactly!

I am still in the same situation... Anyone who knows what to do?

ioanpara said:
Hello,
I am from Greece and Ive bought from Vodafone a Huawei P9 lite vns-l21 before one month. Ive installed the nougat rom 370 with firmware finder but I made a mistake choozing the NRD-90M test key. So I begun to roll back to Marshmallow. Everything ok. Then Itried to install an other rom from firmware finder(i think C432b371) and again NRD-90M test key...
Again roll back to Marshmallow...so in the first step when i was trying to install with dload method the Huawei P9 Lite Rollback Package For L21C432 (EU) my phone stucked on boot loop but I had fastboot. Then I have unlocked the bootloader to see if there is anything that i can do with srk tool and now i have a beautifull bricked phone stuck :
"Your device has been unlocked and can't be trusted.
you device is booting now"
In this point nothing happens, I can not go to fast boot, No recovery mode, The hardware keys not doing anything, only resetting the phone in loop..
I dont know what to do and Huawei wants 215euro to fix my phone.
My mistake I know but is there enything that i can do know? Its a new phone!
Sorry for my english
Click to expand...
Click to collapse
Hmm I dont get why they want 215 euro to exchange the storage chip.
I guess your phone is pretty much a brick now have fun. Lol sry

I had a similar problem with the boot-loop.
Press PowerOff until the screen goes black, and then immediately leave power-off and press Power Off + Volume Up for ever until the phone boots normally.
That's what I did and worked for me.

Can you boot to fastboot, if you can you can recover it with DC-Phoenix tool.

Dejan Kruljac said:
Can you boot to fastboot, if you can you can recover it with DC-Phoenix tool.
Click to expand...
Click to collapse
No he cant, I have the same problem. Cant fastboot, adb or 3 button method. Even tried unplugging battery then doing 3 button method.

Anyone sopve this problem with no fastboot no recovery no 3 buttons mode?

try to drain the battery, keep screen on, or keep phone on until battery is 0%, you can't turn it on . keep volume down and power pressed, plug usb to pc , if you're lucky fastboot could be ok

Hi there, I also managed to brick my P9Lite - no recovery, no fastboot. After draining the battery completly the phone starts fine but I can't install system updates. I guess I have to live with that. Unfortunately I can't activate bluetooth. Does anyone has an idea how to get bluetooth working again?

idk for your BT issue , but did you try Firmware Finder for Huawei ? easy to use, you will probably able to dl an update. don't use "small " package OTA, use full firmware, about1.6 or 1.8 Go, may could fix your BT.

sonneper said:
idk for your BT issue , but did you try Firmware Finder for Huawei ? easy to use, you will probably able to dl an update. don't use "small " package OTA, use full firmware, about1.6 or 1.8 Go, may could fix your BT.
Click to expand...
Click to collapse
didn't work out as Firmware Finder is only another way to find a firmware but not another way to install the firmware...

Hello guys,
sorry if i write this but i think necessary to grab best helps..
Try to describe problem in detail (ex. - i was upgrading/downgrading from..........to............ firmware and it bricks, etc...)
Your latest working phone/system/firmware (ex. - mine was VNS-L31C432B381-before i upgraded to EliteRom).
Some information changes according to the country / region of the world in which you live,
so they are useful for those who help you to redirect to the correct thread / give right suggestions...
All the best guyz

didn't work out as Firmware Finder is only another way to find a firmware but not another way to install the firmware...
Yes , a way to get last firmware, or firmware you want through the huawei update app. Without firmware finder ,no way to " force" huawei update app to install anything you want on your device

Sorry for the late response, I'm reading the thread right now. Firmware Finder can also be used to install firmware through eRecovery. Install Firmware Finder for Windows: http://pro-teammt.ru/projects/hwff/v2/GetLatestVersion.action
You need to write down your existing and change both DNS addresses in your router to: 81.177.139.39
You also need to deactivate IPv6 protocol.
Open FirmwareFinderRewrite.exe, go to "common base" and search VNS-LXXCXXX (Your model and customization). Copy the link in "changelog" not of the newest, but of the 2nd or 3rd youngest firmware. Check if it has been approved by pasting the link under the tab with the checkmark (5th position counting from left). If the response is "This firmware was approved to install" you are ready to go.
Copy the same link in the proxy field (the cloud symbol, 4th position counting from left). Click on "set" and "register update".
Now switch off your phone, press "Vol+" and simultaneously connect it to the PC. You enter eRecovery now. Tap on "Download latest version and recovery". Your phone should start the download now, after a couple percent you can reset your router settings, the download will continue. If all is well, the firmware will then be installed.

Getting package info failed on the erecovery.

So this phone is basically brand new about 4 days old and then it just turned off on me. when I booted it up it went into the emui huawei erecovery. I go into download latest version and recovery and connect to my wifi
it loads for a bit and comes back saying 'getting package info failed'. Honestly I'm pretty novice about everything like this so any help would be appreciated. I am planning on returning it to the store in the coming days but I do not have a warranty.

Ova11 said:
So this phone is basically brand new about 4 days old and then it just turned off on me. when I booted it up it went into the emui huawei erecovery. I go into download latest version and recovery and connect to my wifi
it loads for a bit and comes back saying 'getting package info failed'. Honestly I'm pretty novice about everything like this so any help would be appreciated. I am planning on returning it to the store in the coming days but I do not have a warranty.
Click to expand...
Click to collapse
Fastboot working?

Adi5 said:
Fastboot working?
Click to expand...
Click to collapse
What's that? Sorrry but I really dont know much about this

fastboot is a method used where you connect your phone to a PC to flash custom recoverys etc.
The eRecovery has never managed to download anything for me, always failed.
How is the phone 4 days old but you have no warrenty?

Make a factory reset

I have got the same problem. My pin from phone just stopped working, so I went to erecovery mode. It says getting package info failed. I do not really know what to do. Fastboot works.

Hi. How do you do a fast boot? My phone is stuck on erecovery and i cant get out. I did an update and it went to erecovery, package download failed, only options then is shutdown and reboot. Please help.

Tamz213 said:
Hi. How do you do a fast boot? My phone is stuck on erecovery and i cant get out. I did an update and it went to erecovery, package download failed, only options then is shutdown and reboot. Please help.
Click to expand...
Click to collapse
Lol how do you do a fastboot? Bro, I'm sorry, I shouldn't laugh but I do because I've been kinda there and done kinda that. People here, I KNOW, are more than willing to help you but you've gotta come with at least the most basic knowledge. None of us were born knowing, but just research a little, and before long you'll get the ropes believe me it's not hard.
I hope THIS just helped.

Hi i have a honor 8 lite bricked, tried emui .8.0 chinese rom, it worked but when I tried getting back to stock, it was bricked.
Couldnt go to my twrp recovery,
fastboot fails with remote: command not allowed.
flashing recovery using fastboot fails with partition length gets error.
the only thing I could do is huawei e recovery which is failing with getting package info failed.
In fastboot, I could lock and unlock bootloader, please help

you have to use sth like "fastboot flash recovery_ramdisk xxx.img
google this.
As long as fastboot is running you are NOT lost at all

Can't fix bootloop VNS-L21C432

Hello
Thing is a few months ago, I've got this phone with broken screen and dead battery, so i've got those two few days ago, and fixed phone, but when i turn it on, it just restarts after HUAWEI logo.
I can enter recovery, tried factory data, but still same
I've tried dload metod with SD card with VNS-L21C432B131, it is updating, and i think it finish it, but again it won't start.
Other versions won't pass 4%
i can enter fastboot, bootloader is locked, and i'ts FRP locked, so can't realy unlock bootloader :/
I have downloaded this DC - Unlocker, and it gives me IMEI and Serial Nr, and also it says that now Firmware is VNS-L21C900B131
Has anyone had this situation? Can this be fixed?
Alsno, first time to see this DC-unlocker, is it sure that it would unlock FRP and Bootloader, maybe then i'll be able to fix?
Please help

no one can't give me any advice?

ToleX said:
no one can't give me any advice?
Click to expand...
Click to collapse
Hello dude,
it seems that your firmware is now "C900" that mean you have global firmware...
Don't worry about this...
I think you can use the toolkit in the link below and bring your phone back to life..
You may also ask for some help, surely some users or the DEV will look at you...:fingers-crossed:
Regards
https://forum.xda-developers.com/hu...nt/europe-vns-l31-toolkit-bootloader-t3432873

Dadditz said:
Hello dude,
it seems that your firmware is now "C900" that mean you have global firmware...
Don't worry about this...
I think you can use the toolkit in the link below and bring your phone back to life..
You may also ask for some help, surely some users or the DEV will look at you...:fingers-crossed:
Regards
https://forum.xda-developers.com/hu...nt/europe-vns-l31-toolkit-bootloader-t3432873
Click to expand...
Click to collapse
thanks mate,
it looks like that it's C900, but problem is that it doesn't want to start when i install any other version, i have tried with every version I have found to download, and still same
this toolkit doesn't want to recognize my phone, and all drivers are istalled
Multi-tool 8 recognizes my phone in fastboot, I even managed to get bootloader unlocking code, but still i can't unlock it cuz FRP is locked...
looks like it's end of this phone

ToleX said:
thanks mate,
it looks like that it's C900, but problem is that it doesn't want to start when i install any other version, i have tried with every version I have found to download, and still same
this toolkit doesn't want to recognize my phone, and all drivers are istalled
Multi-tool 8 recognizes my phone in fastboot, I even managed to get bootloader unlocking code, but still i can't unlock it cuz FRP is locked...
looks like it's end of this phone
Click to expand...
Click to collapse
did you try the rollback method in dload? 2 files small one and the update.app one.
firstly this. : http://download-c1.huawei.com/download/downloadCenter?downloadId=93788&siteCode=nl put in dload
put the phone off like go in erecovery and shut down,
secondly this : http://download-c1.huawei.com/download/downloadCenter?downloadId=93803&siteCode=nl and restart it.

Kcetin20 said:
did you try the rollback method in dload? 2 files small one and the update.app one.
firstly this. : http://download-c1.huawei.com/download/downloadCenter?downloadId=93788&siteCode=nl put in dload
put the phone off like go in erecovery and shut down,
secondly this : http://download-c1.huawei.com/download/downloadCenter?downloadId=93803&siteCode=nl and restart it.
Click to expand...
Click to collapse
Yes, tried before, with updates for L21, didn't work.
tried again now, but, after smalla update, doesn't want anymore to enter recovery, or start another update, when i push buttons, it now stuck on huawei logo...
still can enter fastboot xD

Phone acting strange - Bricked?

Hi
My phone stopped working a couple of days ago, I had been running a custom rom for 2 mths. I tried to restart and boot to recovery TWRP as I was going to reflash the rom. It charegs with no lights, for a day I couldnt boot to TWRP if it did it stayed on the start screen with no options. Today I can get options in TWRP so I tried to start fresh install but intstallation stops at step 1 ?
I have no idea what happened to the phone or why it just died, but dont understand why I can get into TWRP but cant flash rom etc. Also sometimes it say system destroyed message? but still can get into TWRP ?
Any ideas or help will much appreciated really would like to fix this rather than write the phone off.
Thanks

i think flashing firmware is the only option

ranjodhricky said:
i think flashing firmware is the only option
Click to expand...
Click to collapse
Hi, yeah I think thats what I try, is this flashing stock rom via MI flash or a different process?

try miflash if doesn't work try QFil

update
ranjodhricky said:
try miflash if doesn't work try QFil
Click to expand...
Click to collapse
Hi, been playing with this when i have time over the last few weeks.
I have been trying to flash firmware, I dont seem to be able to get QFIL to work for me, it wont reconsise the port. However MIFlash does but I get errors, sometimes it flashes but doesnt end? other times i have had error flashing modem_a or error flashing modem_b (maybe device is locked).
In ADB it says already unlocked. Also I can only boot into fastboot, not recovery so i cant intall anything from adb sideload, it wont boot into bootloader just powers off if i try this. I guess theres no recovery on it now as I cannot boot into it.
Any ideas on where to go from here , EDL? I really didnt want to attempt to open the phone.
Thanks

Try miflash 2019 with stock rom pie latest with edl mode
if bootloader unlocked You can enter edl mode via fastboot with the command 'fastboot oem edl'

Yincen said:
Try miflash 2019 with stock rom pie latest with edl mode
if bootloader unlocked You can enter edl mode via fastboot with the command 'fastboot oem edl'
Click to expand...
Click to collapse
Thanks, tried this, says success then just carries on , so i have to disconnect. However when then trying to boot the device it shows Android one logo and if im lucky after a few attempts it goes to the screeen saying Hi There, where you choose your language to set up the phone. However it nows seem to be unresponsve and frozen on that screen.
Im beginning to think its could be hardware issue and phone is just faulty, i really dont want to bin it as its imacculate condition seems a real shame, but it is 3 years old i guess.
Any further help or ideas much appreciated.

healy2k said:
Thanks, tried this, says success then just carries on , so i have to disconnect. However when then trying to boot the device it shows Android one logo and if im lucky after a few attempts it goes to the screeen saying Hi There, where you choose your language to set up the phone. However it nows seem to be unresponsve and frozen on that screen.
Im beginning to think its could be hardware issue and phone is just faulty, i really dont want to bin it as its imacculate condition seems a real shame, but it is 3 years old i guess.
Any further help or ideas much appreciated.
Click to expand...
Click to collapse
try doing a factory reset from Recovery , good luck