Database Users

[Q] Well,I dare you to solve this geniuses

Alrighty then. I have Zte Blade 3. Lovely phone. I rooted it and I really loved it. Everything worked perfectly. I even connected my phone to my ADSL 2+ modem. I loved it! And then and ugly motherfu***r like me had to do this. BRICK IT. I tried installing a new mod unsuccesfully. Installation process gave me error so I clicked reboot now in recovery mode.So it turned off. And then it showed me android logo as it always shows when its booting up. And I thought Imma give a rest to the mods I will enjoy my phone as it is. But the problem appeared. My phone DID NOT PASS the green android logo.Just sitting there.Can't enter recovery mode via key combination(never could I actually used RootBlade3 program to enter recovery mode). But now I cant boot,enter recovery mode or get recognized by my pc. Cuz the phone wont boot up. Before you asked I did update all my drivers. This phone cost me some good money and since Im 15 Im dead if I dont get this right. Imma make you a rich man If you fix it(lying cuz Im broke) Thanks in advance.:laugh:

I Love The Register Video said:
Alrighty then. I have Zte Blade 3. Lovely phone. I rooted it and I really loved it. Everything worked perfectly. I even connected my phone to my ADSL 2+ modem. I loved it! And then and ugly motherfu***r like me had to do this. BRICK IT. I tried installing a new mod unsuccesfully. Installation process gave me error so I clicked reboot now in recovery mode.So it turned off. And then it showed me android logo as it always shows when its booting up. And I thought Imma give a rest to the mods I will enjoy my phone as it is. But the problem appeared. My phone DID NOT PASS the green android logo.Just sitting there.Can't enter recovery mode via key combination(never could I actually used RootBlade3 program to enter recovery mode). But now I cant boot,enter recovery mode or get recognized by my pc. Cuz the phone wont boot up. Before you asked I did update all my drivers. This phone cost me some good money and since Im 15 Im dead if I dont get this right. Imma make you a rich man If you fix it(lying cuz Im broke) Thanks in advance.:laugh:
Click to expand...
Click to collapse
Download the official update.zip from official ZTE website for your phone!
It contains a recovery.img .
First copy the whole update.zip to your sdcard.
Then fastboot the stock recovery.img ..
Now it wont boot full , you are only able to get in recovery.
So go in recovery , apply update ; choose the update.zip and let the update.zip install.
Your phone should work fully normally now.

Thanks need more help
kevinrus123 said:
Download the official update.zip from official ZTE website for your phone!
It contains a recovery.img .
First copy the whole update.zip to your sdcard.
Then fastboot the stock recovery.img ..
Now it wont boot full , you are only able to get in recovery.
So go in recovery , apply update ; choose the update.zip and let the update.zip install.
Your phone should work fully normally now.
Click to expand...
Click to collapse
Im so happy you replied. Now here comes the deal-all the flashing and struff not good at it. If you could explain step by step I would be grateful. Slap a link of drivers and I thought you cant flash when your phone cant be recognized. Cuz when I enter fastboot it says waiting for device and then it says device not found. I tried almost every solution via modaco-tpt and many others...please help me bro

I Love The Register Video said:
Im so happy you replied. Now here comes the deal-all the flashing and struff not good at it. If you could explain step by step I would be grateful. Slap a link of drivers and I thought you cant flash when your phone cant be recognized. Cuz when I enter fastboot it says waiting for device and then it says device not found. I tried almost every solution via modaco-tpt and many others...please help me bro
Click to expand...
Click to collapse
You said you tried the recovery.img to fastboot , so : do you got the fastboot drivers for Blade III installed?
When you ain't installed them , it is normal that devices won't be found.
Click here to get to drivers

D800 I'm sure it's bricked, just want clarification

Alright, so I'm stuck in boot loop, the only recovery I can boot into is stock, which doesn't help obviously. I can't get into download mode, and my computer doesn't detect it. Just tell me the bad news.

Have you removed the LG drivers completely and reinstalled them? How did you get into the bootloop in the first place?
Sent from my LG-D800 using XDA Premium 4 mobile app

whynottry said:
Alright, so I'm stuck in boot loop, the only recovery I can boot into is stock, which doesn't help obviously. I can't get into download mode, and my computer doesn't detect it. Just tell me the bad news.
Click to expand...
Click to collapse
Let me see.. If by download mode you mean the blue dots(circles) then - no, you're not in download mode. But if you can enter teh real download mode (it should go past the circles) then you can flash it ( you should be able to flash it).
More info please.

bender_007 said:
Let me see.. If by download mode you mean the blue dots(circles) then - no, you're not in download mode. But if you can enter teh real download mode (it should go past the circles) then you can flash it ( you should be able to flash it).
More info please.
Click to expand...
Click to collapse
There's a lot of info in his previous posts. We went through hell and back trying to fix it. Hopefully you can give some better guidance.

Art Vanderlay said:
There's a lot of info in his previous posts. We went through hell and back trying to fix it. Hopefully you can give some better guidance.
Click to expand...
Click to collapse
Damn. I've read "I CAN get into download mode and ...." :/
will look into it to help out
one question : how did you brick it ?

Let me copy paste my previous three posts.
"When I originally tried to install TWRP, I was rooted in a stock rom, or whatever you call it when you're rooted and haven't installed a rom yet. When I tried originally, I went through CWM and installed it through that, but whenever I rebooted into recovery, I got the android with the caution sign in its chest. I kept trying to install it, and eventually I believe I used the flashify app to install it(the version I believe was 2.6.3.3) and I tried to boot again and it went into a boot loop, and began making a bunch of drives. I used this http://forum.xda-developers.com/show....php?t=2582142to get me into TWRP, and it worked. Problem is, I have no roms, no backups, no download mode, and my computer only recognizes my phone as 'g2'. I tried to install adb drivers manually so that the computer would recognize it as an adb device, but it gave me error:closed, and that's where we are right now. Quite a hole I have dug myself into, huh?"
"Ok, so I went back into linux -- I have dual boot for windows 7 and ubuntu -- and for some reason adb worked there, so I was able to adb sideload a cwm .img. But of course, I got excited because I thought it would just fix it but now I'm stuck in fastboot mode, and still can't get into download mode."
"I tried it, and now it is stuck in a bootloop and isn't detected by my computer. Only thing I can boot into is stock recovery. Looks like this is the end of my G2.."
I truly do think there's nothing that can be done, just from a logical standpoint. It isn't detected by anything on the computer and can only boot stock recovery which doesn't help at all. I do appreciate the help, though.
bender_007 said:
Damn. I've read "I CAN get into download mode and ...." :/
will look into it to help out
one question : how did you brick it ?
Click to expand...
Click to collapse

Ugh..so no fastboot either :/
fastboot was good.

Huawei Nova 2I bricked Please help.

So I've recently unlocked my bootloader with my request code from emui.com and decided to root my phone so after flashing twrp to my phone it resets my phone and yea that's usual. During the process of rooting my phone , after flashing it is, my phone got into a bootloop after like an eight hour of searching I still can't find a fix for it.
I've followed all these steps cause mainly I dont have a nandroid backup, i followed all the steps https://forum.xda-developers.com/mate-10/huawei-mate-10-lite--roms-kernels-recoveries--other-development/oeminfo-collection-t3762385 my boot img has changed to Honor which at that time state I was very happy I thought all of these has come to an end, but ended up still booting my into erecovery,
I really need help to fix my problem, urgent please.
Thank you xda.

Bro, here is the solution u are looking for
forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279

ctlovecyc said:
Bro, here is the solution u are looking for
forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
Click to expand...
Click to collapse
Thank you very much it works but after flashing the firmware my camera isn't working that well so I flashed mate 10 lite's firmware and it work perfectly fine! Thank you!

Testpoint
When i connect testpoint to GND. in device manager, Windows display label : USB SER. It does not seem to have the driver? Please, give me Hisilicon EDL mode driver if you have it.

Help when i flashed a boot.img and system.img i bricked my phone.
what happens is when my phone boots up it goes directly to eRecovery

Sheeee said:
Help when i flashed a boot.img and system.img i bricked my phone.
what happens is when my phone boots up it goes directly to eRecovery
Click to expand...
Click to collapse
Yes, same with me.. any solutions? As I tried to flash TWRP thru fastboot, but still erecovery goues up.

Hello there good sir. May I ask how did you change the Boot.img of your Huawei Nova 2i to Honor? May you give details or do you have the link? Many thanks.

Nokia 5 Stuck in bootloop and failed to find device for partition system

please, my nokia 5 TA 1024 got stuck in a bootloop after a system update. i tried resetting from the recovery mode, but it keeps saying "failed to find device for partition system". i tried flashing with a rom i found online but an error keeps poping up at a point in the flashing process.(i used OST for flashing). i looked into that and i found out that i have to unlock the bootloader. but since the phone cant actually boot, i dont know how to unlock it. please help.:crying:

havardgyasi said:
please, my nokia 5 TA 1024 got stuck in a bootloop after a system update. i tried resetting from the recovery mode, but it keeps saying "failed to find device for partition system". i tried flashing with a rom i found online but an error keeps poping up at a point in the flashing process.(i used OST for flashing). i looked into that and i found out that i have to unlock the bootloader. but since the phone cant actually boot, i dont know how to unlock it. please help.:crying:
Click to expand...
Click to collapse
Got the same problem months ago by an upgrade from oreo to pie. Nothing worked except "fastboot reboot bootloader" from terminal followed by pluged in the phone.
It was not possible for me to do more things. Could not solve the problem until I get an EDL-cable. Then found out that the upgrade had damaged the bootloader. Could then flash it with the latest OST, the EDL-cable and the 7.1 Rom.

Spartan42 said:
Got the same problem months ago by an upgrade from oreo to pie. Nothing worked except "fastboot reboot bootloader" from terminal followed by pluged in the phone.
It was not possible for me to do more things. Could not solve the problem until I get an EDL-cable. Then found out that the upgrade had damaged the bootloader. Could then flash it with the latest OST, the EDL-cable and the 7.1 Rom.
Click to expand...
Click to collapse
ohk. i managed to get the cable. can you please walk me through the process of getting into EDL mode?

havardgyasi said:
ohk. i managed to get the cable. can you please walk me through the process of getting into EDL mode?
Click to expand...
Click to collapse
There are a bunch of instructions how to use the Cable in the right order.
It is important that the driver in Windows is the right one. Most of the time (in mine device) the EDL-mode was detected incorrectly and the driver has to be changed manually.
It's been a while, so I do not remember all the steps. I'm sorry. I've searched the Nokia 5 and 6 Forums. That should answer most of the questions. The rest was try and error.
Good Luck
---------- Post added at 01:37 AM ---------- Previous post was at 01:33 AM ----------
https://forum.xda-developers.com/no...p-unbricking-ny-nokia-6-t3947148/post79889899
https://forum.xda-developers.com/no...p-unbricking-ny-nokia-6-t3947148/post79889899
Try this one for the drivers.

Phone acting strange - Bricked?

Hi
My phone stopped working a couple of days ago, I had been running a custom rom for 2 mths. I tried to restart and boot to recovery TWRP as I was going to reflash the rom. It charegs with no lights, for a day I couldnt boot to TWRP if it did it stayed on the start screen with no options. Today I can get options in TWRP so I tried to start fresh install but intstallation stops at step 1 ?
I have no idea what happened to the phone or why it just died, but dont understand why I can get into TWRP but cant flash rom etc. Also sometimes it say system destroyed message? but still can get into TWRP ?
Any ideas or help will much appreciated really would like to fix this rather than write the phone off.
Thanks

i think flashing firmware is the only option

ranjodhricky said:
i think flashing firmware is the only option
Click to expand...
Click to collapse
Hi, yeah I think thats what I try, is this flashing stock rom via MI flash or a different process?

try miflash if doesn't work try QFil

update
ranjodhricky said:
try miflash if doesn't work try QFil
Click to expand...
Click to collapse
Hi, been playing with this when i have time over the last few weeks.
I have been trying to flash firmware, I dont seem to be able to get QFIL to work for me, it wont reconsise the port. However MIFlash does but I get errors, sometimes it flashes but doesnt end? other times i have had error flashing modem_a or error flashing modem_b (maybe device is locked).
In ADB it says already unlocked. Also I can only boot into fastboot, not recovery so i cant intall anything from adb sideload, it wont boot into bootloader just powers off if i try this. I guess theres no recovery on it now as I cannot boot into it.
Any ideas on where to go from here , EDL? I really didnt want to attempt to open the phone.
Thanks

Try miflash 2019 with stock rom pie latest with edl mode
if bootloader unlocked You can enter edl mode via fastboot with the command 'fastboot oem edl'

Yincen said:
Try miflash 2019 with stock rom pie latest with edl mode
if bootloader unlocked You can enter edl mode via fastboot with the command 'fastboot oem edl'
Click to expand...
Click to collapse
Thanks, tried this, says success then just carries on , so i have to disconnect. However when then trying to boot the device it shows Android one logo and if im lucky after a few attempts it goes to the screeen saying Hi There, where you choose your language to set up the phone. However it nows seem to be unresponsve and frozen on that screen.
Im beginning to think its could be hardware issue and phone is just faulty, i really dont want to bin it as its imacculate condition seems a real shame, but it is 3 years old i guess.
Any further help or ideas much appreciated.

healy2k said:
Thanks, tried this, says success then just carries on , so i have to disconnect. However when then trying to boot the device it shows Android one logo and if im lucky after a few attempts it goes to the screeen saying Hi There, where you choose your language to set up the phone. However it nows seem to be unresponsve and frozen on that screen.
Im beginning to think its could be hardware issue and phone is just faulty, i really dont want to bin it as its imacculate condition seems a real shame, but it is 3 years old i guess.
Any further help or ideas much appreciated.
Click to expand...
Click to collapse
try doing a factory reset from Recovery , good luck