Database Users

Huawei p9 lite bricked, no fastboot, unlocked and stucked on boot....

Hello,
I am from Greece and Ive bought from Vodafone a Huawei P9 lite vns-l21 before one month. Ive installed the nougat rom 370 with firmware finder but I made a mistake choozing the NRD-90M test key. So I begun to roll back to Marshmallow. Everything ok. Then Itried to install an other rom from firmware finder(i think C432b371) and again NRD-90M test key...
Again roll back to Marshmallow...so in the first step when i was trying to install with dload method the Huawei P9 Lite Rollback Package For L21C432 (EU) my phone stucked on boot loop but I had fastboot. Then I have unlocked the bootloader to see if there is anything that i can do with srk tool and now i have a beautifull bricked phone stuck :
"Your device has been unlocked and can't be trusted.
you device is booting now"
In this point nothing happens, I can not go to fast boot, No recovery mode, The hardware keys not doing anything, only resetting the phone in loop..
I dont know what to do and Huawei wants 215euro to fix my phone.
My mistake I know but is there enything that i can do know? Its a new phone!
Sorry for my english

I would suggest getting an sdcard and creating a dload folder inside, then putting an official rom UPDATE.APP file inside the dload folder and try 3button method

o-w-a said:
I would suggest getting an sdcard and creating a dload folder inside, then putting an official rom UPDATE.APP file inside the dload folder and try 3button method
Click to expand...
Click to collapse
Thanks for the advice but I have already tried that with stock rom B161 and nothing happens with 3 button method. Still in the same situation.. Everything i do with the buttons the phone resetting and stays on until the battery is dead..

ioanpara said:
Thanks for the advice but I have already tried that with stock rom B161 and nothing happens with 3 button method. Still in the same situation..
Click to expand...
Click to collapse
do you get verification error or is it just stuck at "your devices is booting now"

o-w-a said:
do you get verification error or is it just stuck at "your devices is booting now"
Click to expand...
Click to collapse
Stuck on "your device is booting now".

ioanpara said:
Stuck on "your device is booting now".
Click to expand...
Click to collapse
As far as I understand, you can't even power off your device which is a problem since the 3button method won't work if you can't power off the device.

o-w-a said:
As far as I understand, you can't even power off your device which is a problem since the 3button method won't work if you can't power off the device.
Click to expand...
Click to collapse
Exactly!

I am still in the same situation... Anyone who knows what to do?

ioanpara said:
Hello,
I am from Greece and Ive bought from Vodafone a Huawei P9 lite vns-l21 before one month. Ive installed the nougat rom 370 with firmware finder but I made a mistake choozing the NRD-90M test key. So I begun to roll back to Marshmallow. Everything ok. Then Itried to install an other rom from firmware finder(i think C432b371) and again NRD-90M test key...
Again roll back to Marshmallow...so in the first step when i was trying to install with dload method the Huawei P9 Lite Rollback Package For L21C432 (EU) my phone stucked on boot loop but I had fastboot. Then I have unlocked the bootloader to see if there is anything that i can do with srk tool and now i have a beautifull bricked phone stuck :
"Your device has been unlocked and can't be trusted.
you device is booting now"
In this point nothing happens, I can not go to fast boot, No recovery mode, The hardware keys not doing anything, only resetting the phone in loop..
I dont know what to do and Huawei wants 215euro to fix my phone.
My mistake I know but is there enything that i can do know? Its a new phone!
Sorry for my english
Click to expand...
Click to collapse
Hmm I dont get why they want 215 euro to exchange the storage chip.
I guess your phone is pretty much a brick now have fun. Lol sry

I had a similar problem with the boot-loop.
Press PowerOff until the screen goes black, and then immediately leave power-off and press Power Off + Volume Up for ever until the phone boots normally.
That's what I did and worked for me.

Can you boot to fastboot, if you can you can recover it with DC-Phoenix tool.

Dejan Kruljac said:
Can you boot to fastboot, if you can you can recover it with DC-Phoenix tool.
Click to expand...
Click to collapse
No he cant, I have the same problem. Cant fastboot, adb or 3 button method. Even tried unplugging battery then doing 3 button method.

Anyone sopve this problem with no fastboot no recovery no 3 buttons mode?

try to drain the battery, keep screen on, or keep phone on until battery is 0%, you can't turn it on . keep volume down and power pressed, plug usb to pc , if you're lucky fastboot could be ok

Hi there, I also managed to brick my P9Lite - no recovery, no fastboot. After draining the battery completly the phone starts fine but I can't install system updates. I guess I have to live with that. Unfortunately I can't activate bluetooth. Does anyone has an idea how to get bluetooth working again?

idk for your BT issue , but did you try Firmware Finder for Huawei ? easy to use, you will probably able to dl an update. don't use "small " package OTA, use full firmware, about1.6 or 1.8 Go, may could fix your BT.

sonneper said:
idk for your BT issue , but did you try Firmware Finder for Huawei ? easy to use, you will probably able to dl an update. don't use "small " package OTA, use full firmware, about1.6 or 1.8 Go, may could fix your BT.
Click to expand...
Click to collapse
didn't work out as Firmware Finder is only another way to find a firmware but not another way to install the firmware...

Hello guys,
sorry if i write this but i think necessary to grab best helps..
Try to describe problem in detail (ex. - i was upgrading/downgrading from..........to............ firmware and it bricks, etc...)
Your latest working phone/system/firmware (ex. - mine was VNS-L31C432B381-before i upgraded to EliteRom).
Some information changes according to the country / region of the world in which you live,
so they are useful for those who help you to redirect to the correct thread / give right suggestions...
All the best guyz

didn't work out as Firmware Finder is only another way to find a firmware but not another way to install the firmware...
Yes , a way to get last firmware, or firmware you want through the huawei update app. Without firmware finder ,no way to " force" huawei update app to install anything you want on your device

Sorry for the late response, I'm reading the thread right now. Firmware Finder can also be used to install firmware through eRecovery. Install Firmware Finder for Windows: http://pro-teammt.ru/projects/hwff/v2/GetLatestVersion.action
You need to write down your existing and change both DNS addresses in your router to: 81.177.139.39
You also need to deactivate IPv6 protocol.
Open FirmwareFinderRewrite.exe, go to "common base" and search VNS-LXXCXXX (Your model and customization). Copy the link in "changelog" not of the newest, but of the 2nd or 3rd youngest firmware. Check if it has been approved by pasting the link under the tab with the checkmark (5th position counting from left). If the response is "This firmware was approved to install" you are ready to go.
Copy the same link in the proxy field (the cloud symbol, 4th position counting from left). Click on "set" and "register update".
Now switch off your phone, press "Vol+" and simultaneously connect it to the PC. You enter eRecovery now. Tap on "Download latest version and recovery". Your phone should start the download now, after a couple percent you can reset your router settings, the download will continue. If all is well, the firmware will then be installed.

Soft Brick, A2017G, Bootloader unlocked, Stock Recovery

(or is it hard brick)
Hi,
A2017G
Started with marshmallow,
Unlocked bootloader
attempted to install Slim7
seemed to work but with some possible errors, (wouldn't sync with google... retrospect I should have looked elsewhere before...)
attempted in install stock rom
using
ZTE_A2017GV1.2.0B04_BootStack_by_tron1.zip
ZTE_A2017GV1.2.0B04_Stock_System_by_tron1.zip
which wouldn't boot
So I tried reinstall Slim7
then stock again,
then, like the noob that I am, I removed twrp with
ZTE_A2017GV1.2.0B04_Full_Stock_Reverter_by_tron1.zip
which installs stock recovery
so, now I have a stock rom that won't boot,
an unlocked bootloader
and stock recovery
Not sure what to do from here
thanks in advance for any assistance.

I can abd sideload and update from SD card, but everything I have fails signature verification.
edit: so frustrating trying to find that 1 zip

Dizzee said:
(or is it hard brick)
Hi,
A2017G
Started with marshmallow,
Unlocked bootloader
attempted to install Slim7
seemed to work but with some possible errors, (wouldn't sync with google... retrospect I should have looked elsewhere before...)
attempted in install stock rom
using
ZTE_A2017GV1.2.0B04_BootStack_by_tron1.zip
ZTE_A2017GV1.2.0B04_Stock_System_by_tron1.zip
which wouldn't boot
So I tried reinstall Slim7
then stock again,
then, like the noob that I am, I removed twrp with
ZTE_A2017GV1.2.0B04_Full_Stock_Reverter_by_tron1.zip
which installs stock recovery
so, now I have a stock rom that won't boot,
an unlocked bootloader
and stock recovery
Not sure what to do from here
thanks in advance for any assistance.
Click to expand...
Click to collapse
Just use MiFlash, that one's guaranteed to work. Read my DFU unbrick guide to know how to use it. Just skip the part where you have to disassemble the phone, since you can get to EDL mode by (with the phone off and the USB cable connected to the PC) holding both volume buttons and inserting the USB-C cable to the phone.

I did read your guide, was, hoping to avoid dismantling it...
I tried pressing all 3 buttons.
Am I understanding the procedure correctly:
[phone switched off] + usb-C cable connected to PC only
MiFlash running at this point??
Hold both volume keys in and in insert Cable to Phone
at this point is the phone supposed to switch on?
At no point am I supposed to press the power button?
fyi: I will try different combinations, is great to have a solution, thank you.
Ah.... ok... so, the phone will display nothing, rely on the sound of PC and/or the device manager check and/or hit refresh on miflash
Fyi to anyone, if you have axon7toolkit installed and thus can't install a second version of MiFlash, open up the toolkit and hit 7 (unlock bootloader) to fire up MiFlash... or just go to C:\XiaoMi\XiaoMiFlash
the FULL_EDL file I have produces a couldn't find script Error when loading into MiFlash
so far when attempting to flash all zips
I have started MiFlash with admin
unzipped FULL_EDL file to a folder in root C:\ and ensured there are no spaces in address.
Every time / Every file produces couldn't find script error when loaded into MiFlash
when I attempt to flash the file it says cannot receive hello packet and then times out with an error
Tried disabling anti-virus/firewall, still same error
upgraded MiFlash to 2017.4.24.0 ( older 2016 is included with axon7toolkit), this removes the couldn't find script error, but still not receiving a hello packet, gunna fiddle with the phone as I'm pretty sure the error is coming from there
YES!
rebooted phone, turned off, restarted into EDL, flashed the stock rom from zte site... is in chinese... but it works. Thank you Thank you
so adventure over, after all that I am back to 6.0.1...

Dizzee said:
I did read your guide, was, hoping to avoid dismantling it...
I tried pressing all 3 buttons.
Am I understanding the procedure correctly:
[phone switched off] + usb-C cable connected to PC only
MiFlash running at this point??
Hold both volume keys in and in insert Cable to Phone
at this point is the phone supposed to switch on?
At no point am I supposed to press the power button?
fyi: I will try different combinations, is great to have a solution, thank you.
Ah.... ok... so, the phone will display nothing, rely on the sound of PC and/or the device manager check and/or hit refresh on miflash
Fyi to anyone, if you have axon7toolkit installed and thus can't install a second version of MiFlash, open up the toolkit and hit 7 (unlock bootloader) to fire up MiFlash... or just go to C:\XiaoMi\XiaoMiFlash
the FULL_EDL file I have produces a couldn't find script Error when loading into MiFlash
so far when attempting to flash all zips
I have started MiFlash with admin
unzipped FULL_EDL file to a folder in root C:\ and ensured there are no spaces in address.
Every time / Every file produces couldn't find script error when loaded into MiFlash
when I attempt to flash the file it says cannot receive hello packet and then times out with an error
Tried disabling anti-virus/firewall, still same error
upgraded MiFlash to 2017.4.24.0 ( older 2016 is included with axon7toolkit), this removes the couldn't find script error, but still not receiving a hello packet, gunna fiddle with the phone as I'm pretty sure the error is coming from there
YES!
rebooted phone, turned off, restarted into EDL, flashed the stock rom from zte site... is in chinese... but it works. Thank you Thank you
so adventure over, after all that I am back to 6.0.1...
Click to expand...
Click to collapse
What? It's in chinese?
Can you tell me the name of the file you used? Do you still have cell signal?

Choose an username... said:
What? It's in chinese?
Can you tell me the name of the file you used? Do you still have cell signal?
Click to expand...
Click to collapse
I got it from here: http://www.ztedevice.com/support
selected:- United Kingdom > Mobile Phone > Axon 7
it offers a file "AXON 7(ZTE A2017G) SD card software package(328540B2634ZTE A2017GV1.0.0B11)"
which hints at being compatible with A2017G... but is A2017V and is chinese, although you can change the language in settings there is still plenty here and there, plus chinese bloatware
and No, I didn't get cell signal.
I've gone back to Marshmellow, I will try again, didn't think it would be so different/difficult... Although wow at MiFlash.

FFS!!!! Relocked bootloader and bricked it!!! there should be a warning!
you gotta laugh,
I am a bit livid, I know the guides come with disclaimers, however, you'd think it would be an obvious important warning to make... DO NOT RELOCK YOUR PHONE.
FFS!

Dizzee said:
FFS!!!! Relocked bootloader and bricked it!!! there should be a warning!
you gotta laugh,
I am a bit livid, I know the guides come with disclaimers, however, you'd think it would be an obvious important warning to make... DO NOT RELOCK YOUR PHONE.
FFS!
Click to expand...
Click to collapse
Good lord...
You probably wiped out both IMEIs, now you relock out of the blue... Go to my DFU unbrick guide and stop doing dumb stuff :silly:

Choose an username... said:
Good lord...
You probably wiped out both IMEIs, now you relock out of the blue... Go to my DFU unbrick guide and stop doing dumb stuff :silly:
Click to expand...
Click to collapse
... after I finally got it working again (thanks for the assist), I thought relocking it was just making it secure again. I been rooting/unrooting and swapping out roms since the galaxy s2, who'd think you can't unlock and relock... I do think there should be warnings as it is too easy a mistake to make... lmao stop doing dumb stuff you start first
My phone is insured so I'm not overly fussed, but others will be less fortunate.

hello everywone...i have a troble to...my phone is A2017GV1.2.0B04 like this in post.
I bay this phone whit broken screen, i change the screen and try sim card but the phone is locked Whit google account... When I try my sim to test microphone, the phone it's work OK, but I unlock google account whit add tools and after that my phone don't have a service.
Phone tells no service or turned off airplane mode...what is not true... I can change the 4g/3g/2g connection to only 3g or something else... Wi-Fi and everything else work great but no service... The phone see what operator is on sim but no service... Somebody to help me please and tell me some tutorials how to fix?
I by this phone from Denmark and now I'm in Serbia... Eny help please
Thanks anyway Dragan
---------- Post added at 08:30 PM ---------- Previous post was at 08:27 PM ----------
Mistake,whit adb tools...

Huawei Nova 2I bricked Please help.

So I've recently unlocked my bootloader with my request code from emui.com and decided to root my phone so after flashing twrp to my phone it resets my phone and yea that's usual. During the process of rooting my phone , after flashing it is, my phone got into a bootloop after like an eight hour of searching I still can't find a fix for it.
I've followed all these steps cause mainly I dont have a nandroid backup, i followed all the steps https://forum.xda-developers.com/mate-10/huawei-mate-10-lite--roms-kernels-recoveries--other-development/oeminfo-collection-t3762385 my boot img has changed to Honor which at that time state I was very happy I thought all of these has come to an end, but ended up still booting my into erecovery,
I really need help to fix my problem, urgent please.
Thank you xda.

Bro, here is the solution u are looking for
forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279

ctlovecyc said:
Bro, here is the solution u are looking for
forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
Click to expand...
Click to collapse
Thank you very much it works but after flashing the firmware my camera isn't working that well so I flashed mate 10 lite's firmware and it work perfectly fine! Thank you!

Testpoint
When i connect testpoint to GND. in device manager, Windows display label : USB SER. It does not seem to have the driver? Please, give me Hisilicon EDL mode driver if you have it.

Help when i flashed a boot.img and system.img i bricked my phone.
what happens is when my phone boots up it goes directly to eRecovery

Sheeee said:
Help when i flashed a boot.img and system.img i bricked my phone.
what happens is when my phone boots up it goes directly to eRecovery
Click to expand...
Click to collapse
Yes, same with me.. any solutions? As I tried to flash TWRP thru fastboot, but still erecovery goues up.

Hello there good sir. May I ask how did you change the Boot.img of your Huawei Nova 2i to Honor? May you give details or do you have the link? Many thanks.

nokia 6 dead

hello
i got a problem with my nokia 6 im hoping someone here is able and willing to help me with.
The phone started doing a system update, but went dead and afterwards it just says that the phone has ever been rooted and that may lead to security risks and malware and instability or something like that. the phone wont even enter the revocery mode or anything, just keeps flashing the same text.
Looking forward to any help offered. since i dont know much about this kind of things id appreciate a thorough and simply put guide on how to fix it.

I reckon it's the same security patch that messed up my phone. What device do you have TA-10?? It's on the back of the device at the bottom. What version of android were you running?
Sent from my MHA-L09 using Tapatalk

imediax said:
I reckon it's the same security patch that messed up my phone. What device do you have TA-10?? It's on the back of the device at the bottom. What version of android were you running?
Sent from my MHA-L09 using Tapatalk
Click to expand...
Click to collapse
yeah its ta-1021. unfortunately i dont know what version of android was i running.

janekkkk said:
yeah its ta-1021. unfortunately i dont know what version of android was i running.
Click to expand...
Click to collapse
Hold down power and volume up until the device powers off. Now, plug the phone into your PC while holding voldown and pwr. It should now say "Download mode" in the bottom right. You can now flash MENA firmware with ost 6.0.4
Let me know if the problem persists.

quagsirus said:
Hold down power and volume up until the device powers off. Now, plug the phone into your PC while holding voldown and pwr. It should now say "Download mode" in the bottom right. You can now flash MENA firmware with ost 6.0.4
Let me know if the problem persists.
Click to expand...
Click to collapse
thank you for answering. the phone is always shut off so i cant do the first step. Neither will the phone go to download mode, simpli says the root stuff again. Only time it does something else is when trying to do a hard reset, then it will also say shutdown device: under the root stuff.

janekkkk said:
thank you for answering. the phone is always shut off so i cant do the first step. Neither will the phone go to download mode, simpli says the root stuff again. Only time it does something else is when trying to do a hard reset, then it will also say shutdown device: under the root stuff.
Click to expand...
Click to collapse
When turned off, open OST and connect your phone when it tells you to do so. It will boot into download mode automatically. (Mine did, so I assume yours will do the same)

ZeroPointMax said:
When turned off, open OST and connect your phone when it tells you to do so. It will boot into download mode automatically. (Mine did, so I assume yours will do the same)
Click to expand...
Click to collapse
got the phone into download mode now i think, atleast it says so on the bottom left corner, but when i try to do the ost la thing it gives an error everytime.
the update process failed !
error code 0xc6da
error: download fails
error=se_err_adb_cmd_GET_FAIL_result(0xc6da)

janekkkk said:
got the phone into download mode now i think, atleast it says so on the bottom left corner, but when i try to do the ost la thing it gives an error everytime.
the update process failed !
error code 0xc6da
error: download fails
error=se_err_adb_cmd_GET_FAIL_result(0xc6da)
Click to expand...
Click to collapse
Can you go into recovery? Grab the dec 2017 update and Flash it from there. This is for downgrading some mechanics that changed with Android Oreo. OST should work again. For more detail, you can look around the many threads and answers on xda.

nokia products
janekkkk said:
hello
i got a problem with my nokia 6 im hoping someone here is able and willing to help me with.
The phone started doing a system update, but went dead and afterwards it just says that the phone has ever been rooted and that may lead to security risks and malware and instability or something like that. the phone wont even enter the revocery mode or anything, just keeps flashing the same text.
Looking forward to any help offered. since i dont know much about this kind of things id appreciate a thorough and simply put guide on how to fix it.
Click to expand...
Click to collapse
I used the nokia products and realized the quality of the product. There is really a special magic in the products that attract the customer. I suggest you use nokia products. I have a site that I've introduced about the popular nokia products. Visit my blog :

@yarimehdi33 this is spam

nokia 6 dead during update Orio to Pie
imediax said:
I reckon it's the same security patch that messed up my phone. What device do you have TA-10?? It's on the back of the device at the bottom. What version of android were you running?
Sent from my MHA-L09 using Tapatalk
Click to expand...
Click to collapse
same problem with my mobile plz help how to fix this problem

Bilal Rehman said:
same problem with my mobile plz help how to fix this problem
Click to expand...
Click to collapse
Boot to download mode by pressing volume down and power button continuously when phone is off.
Download OST 6.0.4 and flash nb0 firmware.
It'll only work if you're max on Dec update.. if later then that than first flash ota from recovery to downgrade bootloader.

P9 Lite VNS-L22 Bricked - No bootloader, don't know the cust

Hi everyone! I need some help here, I have a Huawei p9 lite VNS-l22, from my uncle, this phone is in a bootloop, after a few reboots, it enter in E-recovery mode, but don't fix the problem
I can't unlock bootloader, because, huawei stopped sending codes
Another problem that I have, is that I don't know which is the "Cust" of the phone, because, it never completely boot, so I can't see it in settings
Apparently, It entered in this "situation" during a failed update
Thanks!

one0407 said:
Hi everyone! I need some help here, I have a Huawei p9 lite VNS-l22, from my uncle, this phone is in a bootloop, after a few reboots, it enter in E-recovery mode, but don't fix the problem
I can't unlock bootloader, because, huawei stopped sending codes
Another problem that I have, is that I don't know which is the "Cust" of the phone, because, it never completely boot, so I can't see it in settings
Apparently, It entered in this "situation" during a failed update
Thanks!
Click to expand...
Click to collapse
Hello,
try a factory reset from e-recovery..
Yes you could unlock the bootloader via paid service,
but you cannot because you cannot access
the developer options and tick the oem unlock...
Do you remember if the device was on android 6 or 7 before the bootloop ?
Which region do you live ? (for the cust)

Dadditz said:
Hello,
try a factory reset from e-recovery..
Yes you could unlock the bootloader via paid service,
but you cannot because you cannot access
the developer options and tick the oem unlock...
Do you remember if the device was on android 6 or 7 before the bootloop ?
Which region do you live ? (for the cust)
Click to expand...
Click to collapse
Hi! sorry for late response!
I´m not sure if it was android 6 or 7
I live in Venezuela, Latin America, what do you recommend, without unlocking bootloader, e recovery factory reset doesnt work

one0407 said:
Hi! sorry for late response!
I´m not sure if it was android 6 or 7
I live in Venezuela, Latin America, what do you recommend, without unlocking bootloader, e recovery factory reset doesnt work
Click to expand...
Click to collapse
Don't worry dude,
we can reply when we find time for...
Important !! READ BEFORE DO ...
I made a little search and think you
have a couple possibility...
1 - bring your device to a service point but it will cost you money.
2 - try flash a firmware and pray your phone someway will come back to life...
You have nothing to lose, try doing this ...
Download THIS FILE (update.zip).
Unzip it and extract update.app file.
Take an SD card with at least 4gb and format as FAT32.
Then inside that SD card create a folder and rename it DLOAD.
Put update.app file into DLOAD folder and insert the SD inside the device.
Turn off the device then turn it on holding vol+ vol- and power buttons together
till a flash screen will appear...
If it goes well you will have a device with a corrupt but functioning firmware ...
At this point you'll be able to unlock the bootloader (it will cost 4 euros),
make a complete rebrand (asian L22 version) and have a full functioning device..
If something will not go as expected, only way is bring the device to a service point...
Choise remain yours..
Cheers

Dadditz said:
Don't worry dude,
we can reply when we find time for...
Important !! READ BEFORE DO ...
I made a little search and think you
have a couple possibility...
1 - bring your device to a service point but it will cost you money.
2 - try flash a firmware and pray your phone someway will come back to life...
You have nothing to lose, try doing this ...
Download THIS FILE (update.zip).
Unzip it and extract update.app file.
Take an SD card with at least 4gb and format as FAT32.
Then inside that SD card create a folder and rename it DLOAD.
Put update.app file into DLOAD folder and insert the SD inside the device.
Turn off the device then turn it on holding vol+ vol- and power buttons together
till a flash screen will appear...
If it goes well you will have a device with a corrupt but functioning firmware ...
At this point you'll be able to unlock the bootloader (it will cost 4 euros),
make a complete rebrand (asian L22 version) and have a full functioning device..
If something will not go as expected, only way is bring the device to a service point...
Choise remain yours..
Cheers
Click to expand...
Click to collapse
THANK YOU! this actually worked very well!

one0407 said:
THANK YOU! this actually worked very well!
Click to expand...
Click to collapse
You have been very lucky and I am so happy
you can still use the device. :highfive:
Cheers