Hi I am new to the community, and I just bought a zeblaze thor 4, its really cool, but I was messing with dev option so make the image smaller so I can reach some corners of some apps to reach some options I cant.
So there was a option that is something like simulate screen, and I hit some stupid option so now the visible screen y not working anymore because its supposed to be a bigger simulating screen that doesn't aloud me to use the screen anymore.
I been searching for a solution all day, but it seems like there is almost nothing out there (google search) about this watch.
I ve tried somethings but with no success like:
1-Try to screen cast my watch into my lap using mobizen, but It fails because I couldnt reach the accept button in the watch
2-Cant do any solutions involving adb because i cant enable usb debug because of the same screen problem (unless theres a way to enable directly from a laptop)
3-Team viewer quick support because the watch its not fully compatible with the screen share
4-Reset the watch, but it restarts with the same setting on.
So I f any one can tell me how to reset dev option or how to factory reset this watch without usin the screen, or how to enter recovery mode in this watch or any other solution I wiill really appreciate it!!! Thanks.
I just bought the Zeblaze Thor 4. I am located in the USA. I purchased a SIM card from speedtalkmobile.com which is on the T-Mobile network. I have configured the Watch according to the APN settings that the SIM card provider sent me and it still does not work for 3G/4G data. I inserted the SIM card into an unlocked Android phone and edited the APN settings in the phone and it worked just fine.
What should I do to get the 3G and 4G Data working on the Zeblaze Thor 4 smartwatch? Thanks much for your help!
Olá, comprei um Zeblaze Thor 4. Estou carregando a bateria do celular mas ele não liga mais. Aparece apenas a tela com as opções "Restart", "reboot" , e mesmo apertando estas opções, ele apenas liga a tela com o logo da Zeblaze e depois não liga a tela. Mesmo apertando o botão power só aparece as opções que citei acima. Como proceder isso? E há como fazer o start reset?
rzknow said:
I just bought the Zeblaze Thor 4. I am located in the USA. I purchased a SIM card from speedtalkmobile.com which is on the T-Mobile network. I have configured the Watch according to the APN settings that the SIM card provider sent me and it still does not work for 3G/4G data. I inserted the SIM card into an unlocked Android phone and edited the APN settings in the phone and it worked just fine.
What should I do to get the 3G and 4G Data working on the Zeblaze Thor 4 smartwatch? Thanks much for your help!
Click to expand...
Click to collapse
What bands do T-Mobie use for 4G?
Sent from my BLA-L29 using Tapatalk
rzknow said:
I just bought the Zeblaze Thor 4. I am located in the USA. I purchased a SIM card from speedtalkmobile.com which is on the T-Mobile network. I have configured the Watch according to the APN settings that the SIM card provider sent me and it still does not work for 3G/4G data. I inserted the SIM card into an unlocked Android phone and edited the APN settings in the phone and it worked just fine.
What should I do to get the 3G and 4G Data working on the Zeblaze Thor 4 smartwatch? Thanks much for your help!
Click to expand...
Click to collapse
I'm afraid it doesn't support US LTE bands
https://forum.xda-developers.com/showpost.php?p=75711594&postcount=15
Anatasia said:
I'm afraid it doesn't support US LTE bands
https://forum.xda-developers.com/showpost.php?p=75711594&postcount=15
Click to expand...
Click to collapse
That's a different watch from Finow.
The Zeblaze Thor 4 has B2 and it can be seen in engineering mode.
Having said that - doesn't mean it will work.......
Sent from my BLA-L29 using Tapatalk
Zeblaze Thor 4 app
Hello,
Really want to get Zeblaze Thor 4 but it must have app called Myroundpro for golfing. I heard the samsung s3 wear has watch version of the myroundpro. Someone with Thor 4, can you please check for me if it has myround pro app wearable version??
Thanks in advance
Mobile data
Hey just got thor 4 cant seem to find a button that turns off just the mobile data. Can anyone point me in rite direction
Slide down and left. Here you are
I use my Thor 4 on 4G no issue T-moblie, To change the screen size on the fly hold the power button down and a menu will appear, click the circle on the top, It will turn to a square and so will your display. Click it again to make it round again.
Is this watch able to play the Spotify Playlists offline?
Hi can anyone tell me why my Thor 4 not getting any notification from Iphone also its screen turn off automatically not waking up with hand raise also so can anyone let me know its support call notification & push notification from iphone?
hi
i bought zeblaze thor 4g
its turnoff now i cant able to poweron still it shows nothing data cable is fine
hi there
my thor 4 only give me the image turn off reboot etc. i hard reseted a few times but it doesnt seem to work.
Zeblaze Thor4 Connect with Laptop
Hello, does anybody know how to connect with laptop and data transfer using data/charging cable?
I find this hard to believe. Can you tell me: 1) did you choose 4G as preferred? Enhanced LTE mode? fast.t-mobile.com as APN? and "TMobile 4G' as the network operator?
camoway said:
I use my Thor 4 on 4G no issue T-moblie, To change the screen size on the fly hold the power button down and a menu will appear, click the circle on the top, It will turn to a square and so will your display. Click it again to make it round again.
Click to expand...
Click to collapse
Camoway., I've tried everything. Can you please confirm your settings here? I've even added a dupe APN for 4G non-LTE and the watch will not let me select it (or anything else save the "fast.t-mobile.com") (when I try to select the APN, it takes me to the editor).
Hi there! I cant find any GPS signal in offline, is it normal or mi whatch have a GPS malfuntion?
Hi is there anyway I can get my zeblaze Thor 4 to connect with my phone like people have said it doesn't connect to android wear
I have done the same thing in thor 5 pro
I have done the same thing in Thor 5 Pro did you solve it ??
salemsuky1 said:
Hi I am new to the community, and I just bought a zeblaze thor 4, its really cool, but I was messing with dev option so make the image smaller so I can reach some corners of some apps to reach some options I cant.
So there was a option that is something like simulate screen, and I hit some stupid option so now the visible screen y not working anymore because its supposed to be a bigger simulating screen that doesn't aloud me to use the screen anymore.
I been searching for a solution all day, but it seems like there is almost nothing out there (google search) about this watch.
I ve tried somethings but with no success like:
1-Try to screen cast my watch into my lap using mobizen, but It fails because I couldnt reach the accept button in the watch
2-Cant do any solutions involving adb because i cant enable usb debug because of the same screen problem (unless theres a way to enable directly from a laptop)
3-Team viewer quick support because the watch its not fully compatible with the screen share
4-Reset the watch, but it restarts with the same setting on.
So I f any one can tell me how to reset dev option or how to factory reset this watch without usin the screen, or how to enter recovery mode in this watch or any other solution I wiill really appreciate it!!! Thanks.
Click to expand...
Click to collapse
Related
Ok simple and possible stupid question...
All yesterday my phone was displaying the E icon next to my antenna showing that there was the possiblity of connecting to the Edge network... Now I happen to work in a area where 3G is not supported but I live in one where its spotty.
I went home last night and while fooling with the phone I noticed the U icon instead of the E... Note I'm NOT using the MEdia connection either, I know this is just simply stating that 3G is currenty avilable where I am.
Now I'm back at work today and the U icon is still there, so I got to test it and when I connect it connects with a mini E above the antenna bars.... So why does my major network icon never change showing me whats avilable?
I installed the HTC Kaiser Dialer + 3G-Batt Icons for my vp3G rom, so I dont know if maybe thats causing it?
I just signed up for media maxx today so I'll test my media connection when I get home to see if it shows up with a 3G...
It doesn't show you what's available. It shows you how you connected, if you are connected.
Um, no it shows whats avilable because this is showing up when my phone is not connected to the MEdia Net service.
Right from the manual.
The LARGE U an E icons are the ones I'm talking about...
Either way I removed the HTC Kaiser Dialer + 3G-Batt Icons program, and it went back to a E icon
so I think it had something to do with that.
The manual is wrong. I am in a 3.5G area, and my connection icon routinely changes from E to U, even while using it.
You're trying to solve something that is not only not solvable, but is also not a big deal anyway.
Hello,
I just bought Omnia7 and I can't turn 3G off, because there is no such option. I read that it's possible to do in diagnosis. How to do it? I really need to turn it off...
Solved:
Open diagnosis and enter: *#2263# then you can choose: Automatic or 2G or 3G. )) Nice
The t-mobile.de rom lets you change 2g to 3g in settings. I wonder if its available anywhere?!
VonCrisp said:
The t-mobile.de rom lets you change 2g to 3g in settings. I wonder if its available anywhere?!
Click to expand...
Click to collapse
Well, open diagnosis and enter what I wrote in first post and you can switch easily :]
Sometimes my phone is on 2g when this setting is on automatic. If I change the setting to prefer 3g, it then immediatly picks up a 3g signal. Does anyone know why it doesn't just use the 3G automatically if it is available?
slysy said:
Sometimes my phone is on 2g when this setting is on automatic. If I change the setting to prefer 3g, it then immediatly picks up a 3g signal. Does anyone know why it doesn't just use the 3G automatically if it is available?
Click to expand...
Click to collapse
Because it can get low, so phone will go to 2G. :]
Niiceg said:
Because it can get low, so phone will go to 2G. :]
Click to expand...
Click to collapse
Thanks for the response. The problem I have is that the Xbox Live Extras app won't connect to Xbox Live over 2G, I just get an error message. Over 3g it's fine. Is this a known issue that happens for everyone? I guess I will have to leave it set to prefer 3g in diagnostics.
slysy said:
Thanks for the response. The problem I have is that the Xbox Live Extras app won't connect to Xbox Live over 2G, I just get an error message. Over 3g it's fine. Is this a known issue that happens for everyone? I guess I will have to leave it set to prefer 3g in diagnostics.
Click to expand...
Click to collapse
Yea, it happens to me too :] Well, I think it needs more data and etc. :]
When set to prefer 3G, will the phone still use 2G if there is no 3G signal at all?
There is a regedit on the main dev forums that allows to unlock the 3g to 2g toggle for the phones settings.
How can I enter in Open diagnosis mode?
Niiceg said:
Hello,
I just bought Omnia7 and I can't turn 3G off, because there is no such option. I read that it's possible to do in diagnosis. How to do it? I really need to turn it off...
Solved:
Open diagnosis and enter: *#2263# then you can choose: Automatic or 2G or 3G. )) Nice
Click to expand...
Click to collapse
Dude, when givin' sum info pls try to describe procedures as clearly as possible.
When ya dial da code, there are three options popin'up and a lotta numeric buttons plus "back" and "'end" So be so kind as to give a detailed step-by-step manual. In yr case ya should've at least pointed out that these steps do not display any additional toggle switch bw 2G/3G. Moreover at SR ya still got da finger
So nothing is SOLVED
cerato said:
Dude, when givin' sum info pls try to describe procedures as clearly as possible.
When ya dial da code, there are three options popin'up and a lotta numeric buttons plus "back" and "'end" So be so kind as to give a detailed step-by-step manual. In yr case ya should've at least pointed out that these steps do not display any additional toggle switch bw 2G/3G. Moreover at SR ya still got da finger
So nothing is SOLVED
Click to expand...
Click to collapse
Open diagnosis by dialing in dialer ##634#
Then diagnosis app should be added to your app list, open it
In diagnosis dial *#2263#
You get to choose from 3G, 2G and Automatic. Near these options you have numbers 1, 2, 3. So choose one of them and press the key on the keyboard. Choose the connection (all) and press end. That's it
Samsung tools gives you a slider in phone menu
mendel129 said:
Samsung tools gives you a slider in phone menu
Click to expand...
Click to collapse
Is it possible to get dev unlocked phone on NoDo?
Hi Folks,
my wife owns a Samsung Galaxy I9000 (Gosh, i hate this Device, I Love myHTC´s ) .
Yesterday she´s got an Firmwareupgrade to 2.3.3 via KIES (German Debitel Version).
Now she has the Problem that no more 3G E or H is displayed in the Statusbar. Also it is not visible if she is connected to the Mobile network (for example the H with the two up/down arrows).
What can we do to get this back? Is there a point in Settings to be done?
Thx so far for your answers?
Candy-men said:
Hi Folks,
my wife owns a Samsung Galaxy I9000 (Gosh, i hate this Device, I Love myHTC´s ) .
Yesterday she´s got an Firmwareupgrade to 2.3.3 via KIES (German Debitel Version).
Now she has the Problem that no more 3G E or H is displayed in the Statusbar. Also it is not visible if she is connected to the Mobile network (for example the H with the two up/down arrows).
What can we do to get this back? Is there a point in Settings to be done?
Thx so far for your answers?
Click to expand...
Click to collapse
Is the data connection still working? If not, just check APN settings.
That just came to my mind..but I could be wrong
Sent from my sandwiched SGS
That´s it: the Point: APN in APN-Settings has been declared with : [disabled][disabled]
So this was in fact the wrong setting
THX for your fast a correct answer
Hi, um having a problemas with my Yotaphone, um allways with a low sinal of network. Os there any update Tô solve this issue? Regards
https://forum.xda-developers.com/showpost.php?p=69884796&postcount=20
What ROM are you using and IMEI first 4 numbers? To Know the IMEI is *#06# on the dialer, just paste here the first 4 numbers, also, in what country do you live and what network you use. This infos are to know if you have the correct radio controller software for your phone model.
Portuguese <CODE>
Pelo nome presumo que sejas tuga: Lê isto: http://digitalcpu.blogspot.pt/2017/02/yotaphone-2.html
My Solutions
CardosoPedro said:
Hi, um having a problemas with my Yotaphone, um allways with a low sinal of network. Os there any update Tô solve this issue? Regards
Click to expand...
Click to collapse
I had network issues as well, the signal was around 1 or 2 bars, however I since found a way to resolved it by using a service code, check out my steps:
Go into Testing Mode:
1. Launch the Phone app and type:
*#*#4636#*#*
2. Testing Mode will load up, if it doesn't try the code again
3. Scroll down to preferred network types and try a new setting. "LTE/GSM auto (PRL)" helped increase my signal strength here in Warsaw
4. Click turn radio off
5. Turn on Air plane mode/Turn off Air plane mode
6. You may have to repeats these steps until you find a configuration that works for you.
Cheers, also I have attached some screen shots
Hello,
I have a TicWatch Pro 3 LTE Ultra and I got an e-SIM from my operator (Orange France). It works ok with one minor detail : it seems that the LTE connection only gets established if I turn flight mode on and then off...
E.g. test situation : watch is connected via BT. I turn off BT and Wifi on the watch, and the LTE connection does not start.
I turn on and off flight mode and voilà, LTE connection is established.
Other test situation : I left home for a footing and after a while realized the watch had not connected to LTE. Turned flight mode on and off, and voilà, LTE connection is ok.
Is it normal behavior? Do I miss a config parameter somewhere? If it is normal, the least I can say is that it is not seamless...
Thanks for any help,
thefa said:
Hello,
I have a TicWatch Pro 3 LTE Ultra and I got an e-SIM from my operator (Orange France). It works ok with one minor detail : it seems that the LTE connection only gets established if I turn flight mode on and then off...
E.g. test situation : watch is connected via BT. I turn off BT and Wifi on the watch, and the LTE connection does not start.
I turn on and off flight mode and voilà, LTE connection is established.
Other test situation : I left home for a footing and after a while realized the watch had not connected to LTE. Turned flight mode on and off, and voilà, LTE connection is ok.
Is it normal behavior? Do I miss a config parameter somewhere? If it is normal, the least I can say is that it is not seamless...
Thanks for any help,
Click to expand...
Click to collapse
Hey, I faced the same situation as you and after some investigation, I figured out what was the cause in my case - maybe it will help you too. I use two SIMs in my phone - the main one is from T-Mobile, the second one is from Orange. It turned out that if my Orange SIM card isn't set as default FOR THE PHONE CALLS, the watch does not switch to LTE automatically (at the same time in the Wear OS app the option of the watch LTE connection disappears). Interestignly, the options of default SIM card for SMS and for mobile internet don't play the key role here. Let's check if this helps in your case, if not, maybe do a factory reset.
Also I found out that it may behave differently on a different ROMs - when I switched ROM to the other one, LTE on my watch enables automatically irrespective of which SIM card is set as default.
Thanks a lot for answering so fast ! I knew there should be someone out there with an opinion ;-)
I do have 2 SIMs on my phone. One is Orange (e-SIM on the phone as well, BTW) and the other is Bouygues.
I tried to configure Orange as default for calls, ran the same test but did not see an improvement.
I'll test more and see if after restarting everything, it gets better.
Thanks again for the answer, I'll report back right here after more tests.
Also, what ROMs are you talking about, please? ROM for the watch? Which ROM do you use? I have the standard one...
Update from the morning, I had a notification on my watch saying that the e-Sim was activated" (which it was already), and now it seems that the LTE connection establishes itself when and as it should !!
Thanks a lot @Lord Sithek !
thefa said:
Update from the morning, I had a notification on my watch saying that the e-Sim was activated" (which it was already), and now it seems that the LTE connection establishes itself when and as it should !!
Thanks a lot @Lord Sithek !
Click to expand...
Click to collapse
Oh wow, I was just writing an answer to you Im glad you got it working. By the way, I was talking about the custom ROM on my phone (Xiaomi Mi Note 10). It's strange, but since I switched to the other one (namely, OcatviOS) the issue is gone, even though I set T-Mobile SIM as the default for everything. I didn't find a key to this mystery yet, but good that it works now
One thing that I observed when I was facing your issue is that when the Orange SIM card wasn't set as default for phone calls, the option in the WearOS app that I marked in the screenshot attached disappeared. Whenever Orange was set as default, it was appearing again. Maybe that will be some kind of clue for you and other users in the future.
Cheers
Thanks! I have to say that the the various effects config parameters _on the phone_ have on the watch are less than clear to me... everything but intuitive...