the S7 treasure (Helio X25) comes with a different touch screen as the regular version (400cd/m2 instead 300cd/m2).
Does anybody know where I can get an assembly for to substitute my broken one?
Or is there any solution - may be software update - that can bring the regulare screen to work correctly?
When shut in standby it doesn't 'awake' = stays with great pixel failor and has to be restarted everytime ...
Related
Guys,
My partner just closed my phone in her car boot. It works fine which is good however, half the screen is cracked and dead not good. Will it be chaeper to find a replacement screen, by another Trinity or move to something new.
Where could I by a new screen?
I appricated your comments.
Rich
think i have answered my own question...
http://cnn.cn/shop/p3600dopod-d810-screen-p-1734.html?osCsid=d538dc0645483ca7551cfc78c4c9fab2
anyone now anywhere in the uk?
do I need special tools to fit this?
Hello just for information,
I broke my trinity screen and I baught a new screen to a HK seller and i replace it.
I had already flash the firmware (faman 3.6 full) before changing the screen.
So everything seems ok when I put the phone power on but As soon as I put the creen off, I am unable to put it on it appears every time in a complete white screen !!!! to have something on the screen I have to reboot the phone.
I just reflash the phone again with faman 3.6 and it's still the thame problem completly white after turn the screen off then on ...
I try also an official orange WM5 (gps active) and the screen work's well i try after to switch again in WM6 and it doest work :white screen again ...
Can every one help me ?
@ Rich: Check the 'How to dissamble the Trinity' thread. Are your sure that the LCD is broken ? Could also be just the digitizer (USD 8 at cnn.cn.shop).
If you succeed to dissamble the display you should be able to attach a new digitizer.
The only problem are the two black levers ... (one for the display cable, one for the digitizer).
Good luck
Christian
I cracked my Trinity screen with a bad golf swing. Then I bought a replacement screen on ebay, found a disasembly guide, took my trinity apart, replaced the screen, put everything back together, and it works fine! cost me 70 EUR to fix it.
do it following the disassembly guide - taking the trinity apart is rather complicated, you will not figure it out by yourself.
Sometimes I wonder what the engineers drink before designing such complex assemblies!
My Cingular 8525 is having screens issues that I thought I'd post to the community if anyone has seen this.
The normal screen will go to all white under thermal conditions it appears. Thermal being inside a hot car, in my holster against my hip, gripping in my hand, heavy use with BT or wifi... thus I suspect thermal. I've changed battery's, no change. If it has changed to all white screen, a soft reset will not revert the screen back. The pda appears to have to "cool" off before screen will recover.
Could this be a LCD driver chip dieing? The screen itself? Worth repairing? Got my eye on the AT&T Fuze but wanted to keep the 8525 going for a few more months.
Thanks, Craig
holy crap I'm having the same problem. I havent determined heat to be the problem, but the only possible clue is that once, right after i hung up ona phone conversation, the screen turned semi white. If you looked real hard you could tell that the menus and programs were still operating normally, but the screen was screwy. using johkoss's V8 w. Manilla2D
Major problem, theres a MASSIVE thread going for this, sometimes it pays to use the search function.....
this is "the most common issue" on a hermes device.
I, personally, experienced it 3 times with 3 different hermes. Each time I had to send the device back to the shop. Because my device was under warranty, I always got a new one, free of charge.
You guys might want to check the Wiki, cause I believe there's a section there just dedicated for this issue.
I can't remember what the details are, but if my memory serves me right, it has something to do with the hardware (connection of cables to the screen).
I don't use hermes anymore, but I still come to the hermes forum every now and then...
Therer are actually a myriad of reasons you can get whitescreen, both hardware and software. From the descriptions though, it sounds like hardware.
This can be one of the most difficult things to fix as there may be multiple reasons and fixing one thing won't fix the issue.
^
I am agree with you. White screen may be appears occasionally and may be not. When white screen appears in my experience, it's enough to soft-reset.
May be different solutions with another?
HTC TyTN White Screen Issue with S/N Starting with HT6's
is your TyTN S/N start's with a HT6 you have a defective model for sure they are one of the first breads and are being known too have issues, so anyone make sure it starts with a HT733G4323 Etc, if your buying one of these used.
Or Even new Watch Out.
HTC TyTN
1.10
mobile 5
With 6.1 Plug-in's
Can't say that MY HT6 is a problem.. I actually found it faster than a HT7 (I have both). I did have to replace the LCD, BUT, it was because the touchscreen died, NOT whitescreen.
I bought the HT7 as a broken Hermes off ebay and found that it was actually less responsive than my older model. Used it to fix my older HT6 than use the HT7 motherboard in my, now, Frankenphone....
The "broken" Jasjam had a broken camera. It was actually just unplugged from the board. Liked my older model better...
Cheers...
White Screen
Hi to all,
I'm using PDAcorner v.20 w/ 5mb page pool,i to has encounter a white screen issue,it is true that its my be a hardware and software issue but if you only encounter white screen that all the time it is a software issue,you can check (schaps advance config) im using version 2.02.1.0.0 builtin in pdacorner v20 check the performance setting disable file system cache and file system filter cache in the glyph cache use only 8kb observe if the white screen will appear again.
hope that this will help all with white screen issue.
Hi Buddies
I had bought 2nd hand wizard couple of weeks ago. Everything is working fine till yesterday.
From yesterday noon, the screen of my phone is continuously flickering without any reason.
When i switched it on , The flicker started like someone is wiving the screen from inside (up and down) and this up/down of view continue increasing gradually with the time.
Screen also shows splashes of lights just like some tube light trying to lit on.
I am using TNT Win Mob 6.1 as OS and remaining details of device are in my signature.
Anybody have any idea to cure it .... ??
Updates
I have downgraded to TMobile Official WM 5 ROM ...
But the problem still persist.
Although it disappears for some time, may be less than an hour, but after that, same occurs again...
Its kind of Technical / physical problem in my opinion as ... same flickring exists at the time of booting and startup screen of windows behaves same like normal working screens.
What i want from you people is, suggestion about .. what should be the cause of this .. either LCD screen going to die or .... some cable connection is the cause ...
Problem Update
HTC Service Manual For Wizard Says :
3－A．Unusual Vertical / Horizontal lines or partial display
(1) Check the connection of LCM FPC whether is properly connected.
(2) Try with another LCM.
(3) Try with another Main Board.
(4) Replace LCM if necessary
(5) Replace Main Board if necessary.
(6) Once the defective part has been identified, verify it again with the defective part whether the symptom could be duplicated.
Probably it's the faulty flex cable (the one that connects motherboard with the screen). Disassemble the device ant check if the connector on your motherboard is not loose.
I have the same problem, and can only use my wizard when the keyboard is slid out
OK I have had my T-mobile Wing aka HTC Herald since last April.
Just a few days ago I encountered a problem with my lcd. And I would like your guys feedback if possible before I purchase an lcd replacement.
My problem is when I slide open the wing my screen starts to fade, (almost making it look like a negative from a picture) after that it starts to fade to different colors.
Now the problem persists when the phone is closed, however if I tap the top of my wing and hold it the screen becomes normal, but once I let go it starts to fade again.
I would like to know if any of you experienced this with ur phone and if a replacement lcd screen will fix the problem or am I sol?
If it helps im running my wing on Open Touch v6.0 WM 6.1 Build 20273.1.3.3
Thanks in advance.
LCD problems
Hello,
I too have some weird LCD problems and instead of creating a new thread I thought of posting in this one.
For the past few months, whenever I get a call or resume my phone from standby mode using the power button the entire screen goes white or sometimes it has green or blue colored lines all over them. I have to keep on pressing the power button few times to get proper display. Also whenever I open the qwerty keyboard the display goes blank. Since I am out of warranty Tmobile is not ready to replace the phone and I contacted the HTC customer service and they told that the display unit and some hardware stuff is gone and it needs to be replaced and will cost a minimum of 170$ and will increase if they had to replace some other hardware.
Please note that, my screen is NOT broken and the touch screen too works fine. Recently the display has gone completely blank or too faded even to see whats there in the screen I could barely see the today screen.
I searched and I did not find any similar issues that other folks have faced. Since the LCD and the touch screen is not broken replacing them is not going to fix the issue, correct? I was using open touch and recently I updated the latest official Tmobile release of ROM 6.26.xxx. I also tried the hard resets too.
Any other ideas/suggestions will be of great help for me. Thanks in advance.
I am having some similar problems as well, but my problem is much more severe. My screen is completely black and it just happened this past weekend. When i slide the phone the screen used to flicker but now it black as well. Phone works fine but is useless due to the fact the the screen is out. I remember seeing a program where you can interact with your phone via your pc when something was wrong w/ your screen (cracked, broken, etc.) I have searched the forum but to no avail. The program was very simple and effective. I plan on replacing my phone but would like to retrieve some info off the one I have. I just need that program! Anyone please HELP US!
handsome22 said:
I am having some similar problems as well, but my problem is much more severe. My screen is completely black and it just happened this past weekend. When i slide the phone the screen used to flicker but now it black as well. Phone works fine but is useless due to the fact the the screen is out. I remember seeing a program where you can interact with your phone via your pc when something was wrong w/ your screen (cracked, broken, etc.) I have searched the forum but to no avail. The program was very simple and effective. I plan on replacing my phone but would like to retrieve some info off the one I have. I just need that program! Anyone please HELP US!
Click to expand...
Click to collapse
link to the thread containing some info about the software... its called my mobiler
thanks for the info
Hello,
I've got a problem with the display of my brandnew Trinity. Where a pure black area should be displayed, the screen shows a black area which includes many little colored pixel (always the same) that doesn't switch off. With a black background setted, it looks like the milkyway, just with color. I couldn't say if this is a software or a hardware issue, because I have flashed some different ROMs before I recognized these bugs. After flashing back to the latest HTC release the output stays the same. I think the display is broken.
Are there any people with the same problem, or somebody with a solution?
I'm also looking for the original A1 ROM (including QuickGPS), if somebody has.
Greetings
go to this topic
http://forum.xda-developers.com/showthread.php?p=3995707#post3995707