the phone does not start anymore. there is the yellow writing "Set Warranty Bit: kernel" after which the phone does not start. everything remains blocked.
this is the SM-G530FZ model. I put it in download mode (odin mode) and I read the info appearing at the top left. among these there is "KNOX WARRANTY VOID: 0X1 (1)"
I have read that it means that the guarantee has been violated and it is in no way possible to change this value. it's true?
Same Problem here. Sm G532f
nicodemouse said:
the phone does not start anymore. there is the yellow writing "Set Warranty Bit: kernel" after which the phone does not start. everything remains blocked.
this is the SM-G530FZ model. I put it in download mode (odin mode) and I read the info appearing at the top left. among these there is "KNOX WARRANTY VOID: 0X1 (1)"
I have read that it means that the guarantee has been violated and it is in no way possible to change this value. it's true?
Click to expand...
Click to collapse
Yes, it is not possible (yet) to reset the no of Odin flashes, but you can fix that issue pretty easily,
Just download the stock ROM and flash via Odin and it should work.
If if doesn't boot or gets stuck in Bootanimation, just go to stock recovery and reset it.
If the WiFi does not work, try reflashing.
Hope this helps.
Related
Good day everyone! I'm having a really big problem about my I9505 (Locked to Globe Carrier - Philippines) right now, I was flashing through odin recently, then it failed, after that, I tried rebooting it, then this showed up: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." On the upper left corner, its says there:
ODIN MODE
PRODUCT NAME: GT-I9505
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0X1
CSB-CONFIG-LSB: 0X230
WRITE PROTECTION: ENABLE
EMMC BURST MODE: ENABLED
I don't care about my warranty anymore, I just want it to be fixed. Any help and suggestion would be really much appreciated. Thank y
Click to expand...
Click to collapse
ou!
junchronick said:
Good day everyone! I'm having a really big problem about my I9505 (Locked to Globe Carrier - Philippines) right now, I was flashing through odin recently, then it failed, after that, I tried rebooting it, then this showed up: "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." On the upper left corner, its says there:
ou!
Click to expand...
Click to collapse
Hi, maybe this could help?
http://forum.xda-developers.com/showthread.php?t=2265477
My company issues the Verizon flavor of Galaxy Tab 4 8.0 for our users that are out in the field. It seems like this one particular user (or someone close to them) decided to try and root the device in order to get around the restrictions we have on them via a MDM client. When the tablet boots (even when trying to go into recovery via power+home+volume up) it goes to the triangle screen saying "System software not authorized by Verizon Wireless has been found. Please turn off and go to the nearest Verizon store". But unfortunately the store turned us away saying there's not much they can do. I am able, however, able to get it into download mode.
So far I've tried flashing the Verizon Stock 4.4.4 firmware, which I found searching around here, via Odin 3.10.7. It gives every indication that the process completed and shows the green "PASS" block up top. When the tablet reboots from flashing, it still goes to the triangle screen. Once the triangle screen comes up, upon reboot there's a lock at the bottom of the boot screen and the word "Custom", shown here: http://i.imgur.com/5PC0qeZ.jpg. It seems like maybe the bootloader isn't correctly being overwritten or something. When the tablet is in download mode, it says the following in the top left (after I've already flashed it a few times):
Odin Mode
Product name: SM-T337V
Current Binary: Custom
System Status: Official
Reactivation Lock(KK): Off
Qualcomm Secureboot: Enable (CSB)
RP SWREV: S1, T1, R1, A2, P1
Secure Download: Enable
UDC Start
I'd like to think I'm not a total novice with this stuff, but I'm at a bit of a loss at the moment. Where should I go from here? I've read from a different thread about the note 3 that sometimes you have to flash the .pit file again in order to nuke the partitions, but so far I haven't been able to find one I feel comfortable enough to try.
Hi all members of xda, sorry for my bad english, i will try to explain what exactly is happening with my phone.
I power it on, it`s vibrating and appear "Samsung Galaxy S5........POWERED by android", and that`s all, it continuously restarts itself until i remove the battery.
I can`t enter in recovery mode, it`s restarting from there continuously too... In download mode i can enter, and there at PRODUCT NAME it says is SM-G901F, but under the battery is SM-G900F.
In download Mode this is all what it says: "ODIN MODE (HIGH SPEED)
Product Name: SM-G901F
Current Binary: Samsung Official
System status: Custom
REACTIVATION LOCK: OFF
Knox Warranty Void: 0x0
Qualcomm Secureboot: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P1
Secure Download: ENABLE
UDC START"
This is all.
So, i think that boy from who i bought the phone tryed to root it or flash it with another rom?
Can anyone help me please? Thank you.
What it says the model number is when in download mode is what needs to be believed. There seems to be a lot of this lately.....devices being marketed/sold as the more popular 900F variant when they are not.
You have to get the correct firmware from sammobile or samsung-updates and flash it with odin. I doubt it's the person who sold it to you as apparently nothing can change the info in download mode, and the sticker says something else. The seller may have tried to flash a 900F firmware, but that is probably all he's guilty of......
http://i.imgur.com/rVnFwJM.jpg
Thank you @keithross39, i flashed it but for the first time when he booted up, he passed the "Samsung Galaxy S5....Powered by android" screen, appeared T-Mobile and then he restarts again...and it don`t work yet....keeps restarting itself...
I have and printscreen with odin when it passed but i can`t put it, after 10 posts only.
So what can i do next? Any ideas? Some roms? Thanks.
Try accessing recovery now you have flashed (Vol up, home and power keys together) and wiping cache and/or wiping data/factory resetting.
http://i.imgur.com/rVnFwJM.jpg
@keithross39, appears in left up corner Recovery booting... but its restarting, doesn`t enter in recovery menu...
Can you tell me which version of Android you flashed?......
http://i.imgur.com/rVnFwJM.jpg
This one DTM-G901FXXU1BPA2-20160125170733 @keithross39
5.0.2 from Germany (T-Mobile).
Try flashing this........
https://www.androidfilehost.com/?fid=24399994186369572
It IS for the 901F, but it's what the hosting website calls a 'repair' firmware.
So it is supplied as separate files that have to be loaded into their corresponding 'slots' within Odin. I'm guessing it will be unbranded too. But being a repair firmware, it stands a better chance of successfully flashing and booting than a normal firmware.
http://i.imgur.com/rVnFwJM.jpg
Just finished to flash it and still keeps restarting, didn`t worked @keithross39
What about recovery now, can you access it and do the wipes?
http://i.imgur.com/rVnFwJM.jpg
No, keeps restarting... What if the owner accidently flashed rom for G901F but the phone model is G900F? It can be?
Download mode says 901F.....
AFAIK the info in download mode is hardcoded into the device and can't be changed.....
I can't see how it'd be any other variant....
http://i.imgur.com/rVnFwJM.jpg
Ok, so what i can do more? With box maybe it can be done? Or you don`t know @keithross39? I am very greatful for your time.
So far, everything you've tried would have put your device back to stock and wouldn't have affected knox.....
Knox is regularly used by Samsung to assess whether your device receives a warranty repair. As long as knox remains at 0x0 (as seen in download mode) your warranty is intact.....
Going custom is your only other option and that will trip knox and void your warranty. I can suggest how you can go custom, but it's up to you whether you want to torpedo your warranty when the ability to flash your device successfully is in question.
http://i.imgur.com/rVnFwJM.jpg
@keithross39 the warranty expired. If you say that custom rom will make it work, i say let`s try it...
Don't get me wrong fella....I'm not saying this WILL work.....
There is an element of risk whenever you attempt to modify a device. As I said, I can provide you the information that *should* set you along the correct path, but at the end of the day there are never any guarantees, and it's down to you whether you want to take the risk or not
http://i.imgur.com/rVnFwJM.jpg
Ok, i understand mate, i will take the risk, anyway what can go more wrong...
Lol....don't even *think* that sort of question, let alone type it on a public forum......
Ok....here goes, but first, the usual disclaimer....
"This information is provided for information only. Neither I, nor anybody else on XDA is liable if you choose to undertake the processes set out below. By choosing to complete the steps below, YOU are assuming responsibility for the working (or otherwise) condition of the device when the processes have been completed"......
Having said that, members of XDA will always voluntarily try to help you recover your device if things go wrong.
Get your TWRP from here.....
http://forum.xda-developers.com/galaxy-s5/development/recovery-team-win-recovery-project-t3110930
Get your SuperSU from here.....
https://download.chainfire.eu/696/supersu/
Follow these instructions.....
1) deactivate 'Reactivation Lock' (can be found under Security in Settings).
2) copy SuperSU zip to your device/external memory card.
3) boot into download mode.
4) Odin flash TWRP.
5) DO NOT allow phone to boot, (uncheck auto reboot in odin and if necessary remove the battery as soon as the TWRP flash has completed) then.....
6) boot directly into recovery. (Vol +, Power & Home button combination)
7) flash SuperSU zip.
You now have root and can flash your choice of custom rom for your device.
http://i.imgur.com/rVnFwJM.jpg
@keithross39, how can i make step 1? And i don`t know how to make step 2 neither... :-/
Step 1 can be (at least) checked by booting into download mode and reading the info on the screen. In your first post, your info showed that reactivation lock was off.....hopefully that hasn't changed.
Step 2 requires a micro SD card. You copy the SuperSU zip to that and put it into the phone.
http://i.imgur.com/rVnFwJM.jpg
Hi,
i'm having some trouble with my note 4. so i recived the note from a friend and she told me what was the problem. the problem is that she would turn it off then when she trys to attempt to turn it back on it will show the samsmung boot screen then all black with the blue and white(maby baby blue, i cant tell exacly)and sometimes boots a 2nd or 3rd time. leave it like that and the phone would start getting hot. so i used odin and installed a freash BL, CP, and CSC. then i left the phone withpout the battery for about 10 minute's then i put the battery back on and turned it on. it worked! but after a while i accidentaly turned it off. the same problem was back(i dont know if this is important but when ever u tryed to update the software it would alway's fail). so i thought why dont i just install freash clean OS and i whont have to face this problem again. i installed android 5.0.1 and it did not work, this time the blue adn white notification light was not on. so i installed it again but only the BL. the light was back. please help me on what to do or give me a link to a legitament clean OS. i've tryed every trick! pull out the battery then press and hold the power button to drain out the ramining power and leave the phone for about 10 min. try to go in recovery mode(when i try to do this, it goes all black also), install a clean freash OS, ECT. im running out of options! what should i do! it cant be the hardware because everything was working fine. it cant be the screen because i've personally seen the screen work perfectly fine, plus the samung boot logo( the "samsung galaxy note 4 powered by android" boot). i dont know what to do!
Reboot into download mode and see what firmware is on it. then download the latest MM 6.0.1 firmware and flash it with odin. Depending on the model, the BL may be locked to prevent flashing older firmware. If that doesn't work you may have to flash a pit file with the firmware but that is last resort. If you can take a picture of what download mode says and post it here it would be way easy to help you fix it bro
noob4598 said:
Reboot into download mode and see what firmware is on it. then download the latest MM 6.0.1 firmware and flash it with odin. Depending on the model, the BL may be locked to prevent flashing older firmware. If that doesn't work you may have to flash a pit file with the firmware but that is last resort. If you can take a picture of what download mode says and post it here it would be way easy to help you fix it bro
Click to expand...
Click to collapse
imsorry but i am unable to post a link nor a picture due me being a new user.
but it does say this:
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-N910A
CURRENT BINARY: SAMSUNG OFFICAIL
SYSTEM STATUS: OFFICIAL
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0X0
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T2, R1, A2, P1
SECURE DOWNLOAD: ENABLE
UDCSTART
Hi there,
I wanted to put Cyanogenmod on an J500FN and went straight to Odin without enabling developer options Why? Bc I am dumb.
Since Odin failed I cant even get into recovery mode. Can't enter a password. Can't do anything, really.
Normal start and Recovery Mode start result in the screen showing the Android logo and then turning yellow/green before fading to black.
Download mode is working. I tried Kies, Smart Switch, Odin. Each time it fails and a read line on the phone appears ("Mom Mode. Can't Download"). Using stock firmware from Sammobile results in the same outcome.
Download mode says:
ODIN MODE
PRODUCT NAME: SM-J500FN
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
FRP Lock: Off
WARRANTY VOID: 0x0
RP SWREV: S1, T1, H1 R1, A1, P1
Secure Download: Enable
MOM MODE. CAN'T DOWNLOAD (<--- Added in red each time Odin fails)
Is the phone toast?
Thanks!
1.Try doing wipe data before flashing the firmware.
2.Try flashing Stock LP firmware.
3.Try to flash using Heimdall, which doesn't have some restrictions that Odin has.
4.Nand erase all option in odin might help a bit.
5.If none of these works i guess you need to flash the device using Z3x box or jtag. Go ye visit a samsung service and hopefully they manage to fix your problem.
JayFivehundred said:
Hi there,
I wanted to put Cyanogenmod on an J500FN and went straight to Odin without enabling developer options Why? Bc I am dumb.
Since Odin failed I cant even get into recovery mode. Can't enter a password. Can't do anything, really.
Normal start and Recovery Mode start result in the screen showing the Android logo and then turning yellow/green before fading to black.
Download mode is working. I tried Kies, Smart Switch, Odin. Each time it fails and a read line on the phone appears ("Mom Mode. Can't Download"). Using stock firmware from Sammobile results in the same outcome.
Download mode says:
ODIN MODE
PRODUCT NAME: SM-J500FN
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
FRP Lock: Off
WARRANTY VOID: 0x0
RP SWREV: S1, T1, H1 R1, A1, P1
Secure Download: Enable
MOM MODE. CAN'T DOWNLOAD (<--- Added in red each time Odin fails)
Is the phone toast?
Thanks!
Click to expand...
Click to collapse
Send it to me if you are gonna throw it away
JayFivehundred said:
Hi there,
I wanted to put Cyanogenmod on an J500FN and went straight to Odin without enabling developer options Why? Bc I am dumb.
Since Odin failed I cant even get into recovery mode. Can't enter a password. Can't do anything, really.
Normal start and Recovery Mode start result in the screen showing the Android logo and then turning yellow/green before fading to black.
Download mode is working. I tried Kies, Smart Switch, Odin. Each time it fails and a read line on the phone appears ("Mom Mode. Can't Download"). Using stock firmware from Sammobile results in the same outcome.
Download mode says:
ODIN MODE
PRODUCT NAME: SM-J500FN
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
FRP Lock: Off
WARRANTY VOID: 0x0
RP SWREV: S1, T1, H1 R1, A1, P1
Secure Download: Enable
MOM MODE. CAN'T DOWNLOAD (<--- Added in red each time Odin fails)
Is the phone toast?
Thanks!
Click to expand...
Click to collapse
have you read this post https://forum.xda-developers.com/galaxy-j5/how-to/how-to-unbrick-galaxy-j5-sm-j500h-t3536287
100% it s something that you can do to fix it .. Just search hard i had problems like this on many phones ( not booting and things like that) and i fixed them after some google .. all i can say is Good Luck mate Ps:don t throw it..
EDIT
My bad didnt read your full post.
I was gonna mention Smart_Switch_PC_Setup
Thanks everyone for your comments and suggestions
I have tried everything I could think of and read about. Unfortunately, there was no debrick image for the model I need.
Ultimately, after days of extensive searching and trying, I give up at this point.
Either way, great forum, and thanks again for all the comments!
JayFivehundred said:
Thanks everyone for your comments and suggestions
I have tried everything I could think of and read about. Unfortunately, there was no debrick image for the model I need.
Ultimately, after days of extensive searching and trying, I give up at this point.
Either way, great forum, and thanks again for all the comments!
Click to expand...
Click to collapse
Send it to me