Screen glass replacement - Essential Phone Questions & Answers

Does anyone know if it's possible to buy just the glass for screen? I have a small crack in bottom right corner and a sliver of glass fell out so I can see inside the phone. The LCD digitizer is fully intact no issue. Only thing I can find is full screen replacement with digitizer and all.

I'd like to know as well. I checked one repair shop (Ubreakifix) they stated they have successfully performed the screen replacement once but it was very difficult and cost more than the 200 out of warranty replacement essential offers.

I would personally not bother and just go with the $200 out of warranty replacement that Essential charges

Nickvanexel said:
Does anyone know if it's possible to buy just the glass for screen? I have a small crack in bottom right corner and a sliver of glass fell out so I can see inside the phone. The LCD digitizer is fully intact no issue. Only thing I can find is full screen replacement with digitizer and all.
Click to expand...
Click to collapse
You can.
Check out the Essential Reddit.
There is a thread there and also where to get the parts.

tech_head said:
You can.
Check out the Essential Reddit.
There is a thread there and also where to get the parts.
Click to expand...
Click to collapse
I can't find it.

Nickvanexel said:
I can't find it.
Click to expand...
Click to collapse
https://www.reddit.com/r/essential/comments/8mx94d/successfully_exchanged_the_display/

I see some sellers on ebay, selling only the Glass Lens screen. I am ordering one today for my cracked screen which still responses well. The glass lens is for ~10dollars vs the whole lcd replacement kit for 60bucks.
Let know if anyone has had success with replacement the glass lens only.

DuaSahab said:
I see some sellers on ebay, selling only the Glass Lens screen. I am ordering one today for my cracked screen which still responses well. The glass lens is for ~10dollars vs the whole lcd replacement kit for 60bucks.
Let know if anyone has had success with replacement the glass lens only.
Click to expand...
Click to collapse
How did your install go? I'm thinking about going the same route but I'm concerned it'll just be a big hassle and waste of time.

Nickvanexel said:
Does anyone know if it's possible to buy just the glass for screen? I have a small crack in bottom right corner and a sliver of glass fell out so I can see inside the phone. The LCD digitizer is fully intact no issue. Only thing I can find is full screen replacement with digitizer and all.
Click to expand...
Click to collapse
Not that I know of, a Fix It Fast repair shop said they can't replace just the glass and have to do the full screen.
I paid $70 for a screen online and they charged $30 for labor so I paid $100 in all to have mine fixed(Only took 45 mins).

I broke my screen and not living in the US meant essential wanted nothing to do with me. If you don't mind buying from Aliexpress there are loads of sellers selling replacement screens. Despite what iFixit say, it was really easy. I just used a heat gun and a suction cup and lifted from the top of the phone first as the ribbon cable is at the bottom. After that there just 2 small screw that hold the cable in.
Only real caveat I have for the DIY route is none of the screens I've seen ship with adhesive to fit them. I just used the narrowest 3M double sided tape for screens I could get and still had to trim it down.
The glass, digitizer and screen are pretty much bonded together as one thing I would really not recommend attempting that even if you find somewhere just selling the glass.

Related

Broken plastic "lens" replaceable

So today my phone dropped on the ground flat on the ground from about hip height and after picking it up i noticed i now have a cracked screen from the top.
I'm wondering how much the plastic front lens will run about. I see some prices online for about 100-180$ and it seems like every1 is pointing to the g1 digitizer?
The touch screen features work properly with no problems at all. I'm wondering, is that whats really needed? Or is there just the plastic lens somewhere?
Don't really feel like spending around 130 bucks for accidental damage. Might awell wait for a different phone to come out .
I know you can order just the glass but I have never needed to repair the glass or LCD on a G1 or MT3G. From just looking at mine I assume you can seperate the digitizer from the LCD.
http://shop.ebay.com/i.html?_nkw=g1+glass+&_cqr=true&_nkwusc=g1+glasss&_rdc=1
the G1 digitizer is not a "plastic lens" it's the touchscreen, which sits on top of the LCD screen. I bought a replacement digitizer for relatively cheap on Ebay. If you are going to fix it be extremely careful. I managed to break the flex cable of my LCD screen fixing the digitizer....

Yet Another Dust Under The Screen

I'm fed up of dusts under the screen, every product I buy seems to get it after some time.
I'm sure it didn't have this issue out of the box, as I would have realized. Today, my screen got dirty after playing around with it with greasy hands so I thought I should clean it with the microfiber cloth that came with my TV. I was cleaning it, but turns out the cloth wasn't clean either. Anyway it got even more dust on the screen, and when I cleaned the screen, there was dust under the screen that just didn't go away.
There is just 1 of them, it is only visible under direct light or when the screen is white. It is hard to see, but knowing it is there freaks me out. I don't think I can get a replacement either..
What should I do? Live with it?
Sadly only solution is to send it to samsung for a cleanup maintenance. Thats what i did with my phones
That's a solution but I don't really want to do it just for one pixel... And it's on the far bottom-right, not at a place that's easily seemable. But knowing it's there gives me OCD..
aryuautku said:
That's a solution but I don't really want to do it just for one pixel... And it's on the far bottom-right, not at a place that's easily seemable. But knowing it's there gives me OCD..
Click to expand...
Click to collapse
I WOULD HATE THAT TOO! SUCKS
Are you sure its not scratches in the glass, afaik the touch screen would be glued to the digitizer like most other touch devices, so i dunno how you got dust under there.
natious said:
Are you sure its not scratches in the glass, afaik the touch screen would be glued to the digitizer like most other touch devices, so i dunno how you got dust under there.
Click to expand...
Click to collapse
The dust would be between the top layer of glass and the screen, I had a piece of dust near the edge of the screen that appeared soon after I got the tab, tapped the tab on edge and the dust disappeared never to return.
it is because the builder quality issue. the form between two layer not sealed well.
sometime the duct gets through. it is annoying issue for the phone
It's not at a very-obvious location, and it's really,really hard to see while using it. Now what's smitching my mind is, did it get in there or was it there all the time?
It's a horrible experience to live with it, i lived with it for like 5 months my g2 had a lot of dust under, so what i did is sell it on craigslist, but i chose to meet at night to do the trade so he wouldnt see the dust cuz you really cant see it at night but, i sold it cheap leaving room for the guy to send it back to the factory to fix te problem, selling it could be the best shot for you because if you got dust in there will be more comming in to join the party
Sent from my SGH-T849 using XDA App
rgbc said:
The dust would be between the top layer of glass and the screen, I had a piece of dust near the edge of the screen that appeared soon after I got the tab, tapped the tab on edge and the dust disappeared never to return.
Click to expand...
Click to collapse
That isn't possible to get dust there. I dropped my tab and broke the wimpy gorilla glass. I replaces it and I can tell you the glue that binds the glass to the digitizer is very solidly stuck! Are you using a screen protector? Possibly there?
DarkPal said:
Sadly only solution is to send it to samsung for a cleanup maintenance. Thats what i did with my phones
Click to expand...
Click to collapse
How much did it cost, and how long did it take?
rangercaptain said:
That isn't possible to get dust there. I dropped my tab and broke the wimpy gorilla glass. I replaces it and I can tell you the glue that binds the glass to the digitizer is very solidly stuck! Are you using a screen protector? Possibly there?
Click to expand...
Click to collapse
I dropped my belt buckle on the tab, and got a small line about 2mm on the screen, the LCD is ok, but the top glass is cracked. I have a screen protector, might have kept it from getting bigger.
StarLog said:
How much did it cost, and how long did it take?
Click to expand...
Click to collapse
oops, just saw your question. $140, took twenty minutes. The parts and tools took five days to get here from China.
That gorilla glass should be renamed sissy glass. Or panty glass.
Rangercaptian
If you remember where or what it was called, PM me the url or what ever.
http://www.tvc-mall.com/
I hate those little dusts.
I've had some of them under screen protector but never under the screen itself.
semi-related, but my ipod (not a touch, a video) has a ton of pieces of dirt underneath the glass, presumably on top of the lcd
Tears in my eyes!
No, not from the dust...... from the laughter induced by content of this post.
Please don't get me wrong, dust is a genuine concern, so I don't mean any offence whatsoever.
Thanks (+1) aryuautku for one of the best laughs I've had in a while
"Now what's smitching my mind is, did it get in there or was it there all the time?"
Cheers!
Has anyone ever used an invisible shield, they say it's better than a normal
screen protector and it's easy to install, without any dust under it.
Is that true?

Replace LG Nexus 4 Glass Front Only

Is it possible to replace the front glass without replacing the digitizer and LCD? I have saw many, many glass only replacements on eBay for it. I want to do it myself. Is it possible? I know it is possible for the galacy necus but as the 4's LCD is on top i was wondering on bidding for a cracked screen one on ebay and fixing the glass only.
As far as I know, the digitizer and glass are glued together pretty tightly, and it's extraordinarily tough to separate the two without damaging either; plus, if separate them you have the constant worry of dust getting in there. It's usually worth it to just buy a glass+digitizer that are glued together.
Johmama said:
As far as I know, the digitizer and glass are glued together pretty tightly, and it's extraordinarily tough to separate the two without damaging either; plus, if separate them you have the constant worry of dust getting in there. It's usually worth it to just buy a glass+digitizer that are glued together.
Click to expand...
Click to collapse
I have seen videos of people seperating them on the galaxy nexus. Also, if the glass is cracked is the digitizer gone too? because the touch doesnt work and its cracked.
I have done a teardown of the Front display before. It is not easy. Yes the Digitizer and LCD are Glued together and I HIGHLY recommend NOT attempting to seperate them without the proper setup to do so. Once they are seperated it takes a SPECIAL glue to glue the Digitizer to the LCD and it has to be aligned correctly or you have to go through the process again. ALSO the LCD+Digitizer display is GLUED to the Bezel with an RTV type substance. I HIGHLY reccommend spending the extra few dollars to get the 3 piece setup. With that the repair is VERY Quick and easy. Takes about 15 min or so. (Half of which is getting the Back cover off without breaking anything).
Ohgami_Ichiro said:
I have done a teardown of the Front display before. It is not easy. Yes the Digitizer and LCD are Glued together and I HIGHLY recommend NOT attempting to seperate them without the proper setup to do so. Once they are seperated it takes a SPECIAL glue to glue the Digitizer to the LCD and it has to be aligned correctly or you have to go through the process again. ALSO the LCD+Digitizer display is GLUED to the Bezel with an RTV type substance. I HIGHLY reccommend spending the extra few dollars to get the 3 piece setup. With that the repair is VERY Quick and easy. Takes about 15 min or so. (Half of which is getting the Back cover off without breaking anything).
Click to expand...
Click to collapse
But one question. Is the digitizer broken if the glass is broken and it doenst recognie touches?
EDIT: I will buy a broken nexus 4 off ebay for a few bucks and replace the glass so I want to know if it works if you get it. And there is a 80$ difference between the glass and the 3 piece assembly
jacobreed222 said:
I have seen videos of people seperating them on the galaxy nexus. Also, if the glass is cracked is the digitizer gone too? because the touch doesnt work and its cracked.
Click to expand...
Click to collapse
The Top Glass is the Digitizer, the LCD is just that. I think the iPhone4s/5 has the Digitizer integrated into the LCD and I think this is a process that may start to become commonplace as LG announced that they have a LCD Display with Integrated Digitizer in production now.
jacobreed222 said:
But one question. Is the digitizer broken if the glass is broken and it doenst recognie touches?
Click to expand...
Click to collapse
Yup You can see the digitited touch grid if you look at in the right angle in bright light.
Ohgami_Ichiro said:
The Top Glass is the Digitizer, the LCD is just that. I think the iPhone4s/5 has the Digitizer integrated into the LCD and I think this is a process that may start to become commonplace as LG announced that they have a LCD Display with Integrated Digitizer in production now.
Yup You can see the digitited touch grid if you look at in the right angle in bright light.
Click to expand...
Click to collapse
So youre saying I am out of luck with these:
http://www.ebay.com/sch/i.html?_trk...=nexus+4+glass+replacement&_sacat=0&_from=R40
So why do they sell them anyway? zFor non broken glass?
jacobreed222 said:
So youre saying I am out of luck with these:
http://www.ebay.com/sch/i.html?_trk...=nexus+4+glass+replacement&_sacat=0&_from=R40
So why do they sell them anyway? zFor non broken glass?
Click to expand...
Click to collapse
The Glass IS cheap but they do that so they can trick you into wasting your money. It is not an easy process to do. I have done a replacement on both the fron and back and it was very time intensive. (The front I just ordered the 3 piece and it was quick.) For anyone who has had little to no experience doing display repairs I reccommend the 3 Piece set. If you have SOME experience and have GOOD tools get the 2 Piece. ONLY get the Glass Digitizer IF you have Some professional tools and experience. Also the Special Glue for gluing the Digitizer to the LCD is about $20 by itself so that $15 Digitizer works out to ~$35-40 not to mention if you scratch or break the LCD by accident then you end up having to buy that too. I am not trying to be preachy here but trying to give you the REAL risks and obsticles associated with the repair on the N4. It is a VERY easy phone to repair in general EXCEPT the display. Just get the 3 Piece display and sell the broken one on ebay. It will sell because Professionals (who have the right tools) will grab them and refurbish them and then use them for repairs.
Take a look at this Vid, It's for the iPhone 5 but the process is the same for the N4 and N7.
http://www.youtube.com/watch?v=PbZwypAINYE
Ohgami_Ichiro said:
The Glass IS cheap but they do that so they can trick you into wasting your money. It is not an easy process to do. I have done a replacement on both the fron and back and it was very time intensive. (The front I just ordered the 3 piece and it was quick.) For anyone who has had little to no experience doing display repairs I reccommend the 3 Piece set. If you have SOME experience and have GOOD tools get the 2 Piece. ONLY get the Glass Digitizer IF you have Some professional tools and experience. Also the Special Glue for gluing the Digitizer to the LCD is about $20 by itself so that $15 Digitizer works out to ~$35-40 not to mention if you scratch or break the LCD by accident then you end up having to buy that too. I am not trying to be preachy here but trying to give you the REAL risks and obsticles associated with the repair on the N4. It is a VERY easy phone to repair in general EXCEPT the display. Just get the 3 Piece display and sell the broken one on ebay. It will sell because Professionals (who have the right tools) will grab them and refurbish them and then use them for repairs.
Click to expand...
Click to collapse
OK
jacobreed222 said:
OK
Click to expand...
Click to collapse
Hey,
I have nexus 4. The outer glass is cracked, but lcd works perfectly. However the touch is unresponsive. If i buy just the outer glass from ebay and replaced using UV glue. Would the touch function will work? Its strange that all the other smart phones touch function work, if you break the outer glass; but on nexus 4 it stops working. looking forward to hearing your opinion. thank you.
saj
saj420 said:
Hey,
I have nexus 4. The outer glass is cracked, but lcd works perfectly. However the touch is unresponsive. If i buy just the outer glass from ebay and replaced using UV glue. Would the touch function will work? Its strange that all the other smart phones touch function work, if you break the outer glass; but on nexus 4 it stops working. looking forward to hearing your opinion. thank you.
saj
Click to expand...
Click to collapse
That's what I was asking in the first place. Let me know if you figure it out.
jacobreed222 said:
That's what I was asking in the first place. Let me know if you figure it out.
Click to expand...
Click to collapse
I think the digitizer is so attached to the glass when the glass breaks it breaks the digitizer as well, hence why every n4 LCD that cracks has no touch response, the digitizer is glued to the glass and not the LCD as it is on the galaxy nexus making it a billion times easeyer to just buy a whole LCD unit
Sent from my Nexus 4 [NEO @1.836 GHz] on [PSX v4.1 4.3]
IRX120 said:
I think the digitizer is so attached to the glass when the glass breaks it breaks the digitizer as well, hence why every n4 LCD that cracks has no touch response, the digitizer is glued to the glass and not the LCD as it is on the galaxy nexus making it a billion times easeyer to just buy a whole LCD unit
Sent from my Nexus 4 [NEO @1.836 GHz] on [PSX v4.1 4.3]
Click to expand...
Click to collapse
It probably is easier to replace the whole unit, however it's too expensive for some people; cheapest unit I've found runs for around 120 USD, 10 times more expensive than just the glass. Specially now that Google lowered the prices, and a 120-130 USD screen doesn't make much sense when you can have a new phone for just 199 USD.
In my case, I cracked the lower corner of the screen and the lowermost buttons don't work (ie: home, back and switch app buttons). Otherwise, the screen works perfectly.
From what I've read so far online, it's fairly hard, although not impossible, to replace just the glass on a screen such as our Nexus 4's. The main difficulty is that the LCD, digitizer (the thing that takes your finger's input, in case you're wondering –as I did– what that is) and the glass are fused together. From what I gather (I am, by no means, an expert on this... take whatever I say with a grain of salt) this means that this partes are glued together with very strong adhesive.
I haven't found any videos or guides for our Nexus, but the process should be very similar to this one for a Galaxy S3. For the time being, I resorted to just rotating my phone when I need the back and home buttons. However, when it's time to buy a new phone I'll try to replace the glass on this one.
If anyone of you guys want to try this, I hope you take a video of the process and share it with the rest of us, unlucky/clumsy Nexus 4 owners.
ivancamilov said:
It probably is easier to replace the whole unit, however it's too expensive for some people; cheapest unit I've found runs for around 120 USD, 10 times more expensive than just the glass. Specially now that Google lowered the prices, and a 120-130 USD screen doesn't make much sense when you can have a new phone for just 199 USD.
In my case, I cracked the lower corner of the screen and the lowermost buttons don't work (ie: home, back and switch app buttons). Otherwise, the screen works perfectly.
From what I've read so far online, it's fairly hard, although not impossible, to replace just the glass on a screen such as our Nexus 4's. The main difficulty is that the LCD, digitizer (the thing that takes your finger's input, in case you're wondering –as I did– what that is) and the glass are fused together. From what I gather (I am, by no means, an expert on this... take whatever I say with a grain of salt) this means that this partes are glued together with very strong adhesive.
I haven't found any videos or guides for our Nexus, but the process should be very similar to this one for a Galaxy S3. For the time being, I resorted to just rotating my phone when I need the back and home buttons. However, when it's time to buy a new phone I'll try to replace the glass on this one.
If anyone of you guys want to try this, I hope you take a video of the process and share it with the rest of us, unlucky/clumsy Nexus 4 owners.
Click to expand...
Click to collapse
I also found a series of videos for galaxy nexus to replace only glass
I've found this tutorial for repairing n4 cracked screen, but I don't know if what he's replacing is only the outer glass or the whole digitizer and glass together.
vickev.com/#!/article/repair-your-cracked-lg-nexus-4-e960-screen
and by the way, did someone find the glass with the digitizer for a good price? Not considering those tricky ebay announcements of outer glass, as Ohgami_Ichiro has already alerted.
found this one, but 85,85 € is kinda expensive.
spareslg.com/lcd-e-touch-lg-nexus-4-lg-e960-acq86270901.html
Erich M said:
I've found this tutorial for repairing n4 cracked screen, but I don't know if what he's replacing is only the outer glass or the whole digitizer and glass together.
vickev.com/#!/article/repair-your-cracked-lg-nexus-4-e960-screen
Click to expand...
Click to collapse
It is LCD+digitizer+glass assembly replacement. Not easiest but one of easy ways, costs about $120.
Erich M said:
and by the way, did someone find the glass with the digitizer for a good price? Not considering those tricky ebay announcements of outer glass, as Ohgami_Ichiro has already alerted.
Click to expand...
Click to collapse
For example ebay.com/itm/Original-OEM-NEW-Front-Touch-Screen-Digitizer-Glass-Lens-LG-Google-Nexus-4-E960-/181230445260?pt=US_Cell_Phone_Replacement_Parts_Tools&hash=item2a322d22cc
$38
Erich M said:
found this one, but 85,85 € is kinda expensive.
spareslg.com/lcd-e-touch-lg-nexus-4-lg-e960-acq86270901.html
Click to expand...
Click to collapse
It is glass+digitizer+lcd+housing assembly.
There are also glass+digitizer+lcd+housing+battery assemblies.
If you replace the digitizer only the screen will not respond the same. My galaxy s3 has touch issues now cause I only replaced the digitizer. Now need to buy a whole assembly
Sent from my neXus⁴ using Tapatalk 2
Nexus 4 LG E960 Screen replacement
Well, I was pretty keen on getting a chinese glass/digitizer. The one I had in mind was on ebay.
I was a bit concerned about waiting up to 2 or 3 weeks, but I thought at £28 it would be worth it, as long as I could fit it successfully when it arrived. The alternative was £100 approx from spareslg.com. I was a little concerned about the integrity of the LCD as I was getting some "flowing" around the cracks on the glass. I thought (as was posted earlier) tha it would be no harm in trying to remove the broken glass now, and prep the what was left of the screen for the new glass. If it went well I would know that the LCD was ok. If it went badly however I would loose the opportunity to sell the second hand screen for £20 or so (also posted earlier). I decided to go ahead and strip down the phone.
Getting to the nitty gritty, I warmed up the screen with a hairdryer, inserted a pry tool between the bezel and the glass and started to loosen. I had replaced a glass on a Samsung Galaxy Ace successfully before and this procedure felt very familiar. The procedure actually felt much easier. The glass lifted away from the lcd within three or four minutes, and I continued to heat and ease the glass for only 6 or 7 more minutes. As I was raising the glass while working towards the top of the phone, I noticed that the LCD was leaving the frame as it didn't appear to be held by much, if anything. I thought I would remove what was left of the screen assembly from the frame and continue separating the two parts outside the frame. It was at this point that I noticed that the the LDC panel appeared to be dividing into two parts; like two wafers. Wishful thinking made me hope that what I was seeing was a digitizer membrane or something; but I soon resigned myself to the possibility that the LCD was history.:crying:
I didn't bother to clean off the glue residue, I reassembled the phone and switched it on. The picture below shows that the LCD was ruined. What looks like glass is in fact the movement of the pry tool on the adhesive on the LCD. No flash was used either.
The second photo shows the split LCD. The final photo shows the digitizer grid in the old glass.
If I had the same problem again, I would probably try again. I'd be particularly careful around the edges, not allow the LCD to rise out of the frame (and possibly tear) and take it much more slowly, and possibly use a wire separation tool if around.
Ohgami_Ichiro posted earlier that the costs of digitizer only repairs can go high. If you add fancy glues and tape then it would have cost me at least £50. New at £100 minus sale of old, £15 ?(so net £85) That could be £35 difference, £45 if you skipped the UV glue.
It might not be the last time this phone breaks though!! so savings may increase!
I have no choce now, £100.
Bye the way can anybody recommend a good open case, mine had barely 1.5 ml above screen edge.
Hope you've enjoyed the how NOT to.
Hi dear friends,
Sorry for late answer but i recommend you to take lcd digitizer and replace with cracked one. Becouse generally such chinese complete assemblies (lcd+digitizer and housing) are problematic as lcd quality bit lower than original one. So what to do is; to take digitizer around 20$ (there also which 10$ cost but really lower sensitive digitizer ) and replace it yourself. What else you need for this replacement?
-First you need something thin and sharp like as your grandfathers shaving blade for pry lcd and digitizer. (cost 1$ maybe)
-Then you also need glue cleaner for clean old glue particles, (costs 5$ with uv glue totally)
-uv adhesive for glue lcd with digitizer and (costs 5$ with adhesive cleaner totally)
-3m sticker for attach new digitizer to housing. (2-3$ for piece)
and totally cost max 30$. Maybe you will work more harder but at least you will get phone which which works with original screen with better view. :good:
---------- Post added at 02:42 AM ---------- Previous post was at 02:36 AM ----------
Just i need to warn you to definitely use heating gun or hair dryer(at max. temp.) while seperate cracked digitizer from lcd. Otherwise you will crack your lcd too. With my best wishes!!!

Broken Screen

So I dropped my phone today and now the screen is flickering. the screen is smooth and you cannot feel cracks so the glass itself is fine. There are cracks underneath the glass so I'm assuming it's the display. Can anyone direct me to replacement parts?
Thanks
Samip430 said:
So I dropped my phone today and now the screen is flickering. the screen is smooth and you cannot feel cracks so the glass itself is fine. There are cracks underneath the glass so I'm assuming it's the display. Can anyone direct me to replacement parts?
Thanks
Click to expand...
Click to collapse
http://www.amazon.com/Samsung-Galax...ie=UTF8&qid=1390098358&sr=8-2&keywords=s4+lcd
http://www.amazon.com/Samsung-Galax...ie=UTF8&qid=1390098358&sr=8-1&keywords=s4+lcd
If you don't want new, search on Amazon for S4 LCD. I just bought the black one above for a few dollars more. Its brand new, and you wont regret buying new. Of course there are used ones on ebay, I guess it depends on the quality and reliability of the seller, but i can vouch for the black one i bought on amazon.

Whitestone Dome Strength Quality

I started using the Whitestone Dome on my Galaxy S8 and loved it. So, I use it with my S9+. However it seems like the strength is weaker than the previous version because it seems to crack all the time. I am constantly replacing it. I am curious if anyone is experiencing this?
All the time is a lot of money! Mine developed spider cracking top right corner
Sent from my SM-G965U using Tapatalk
Have you thought about trying a rhino shield glass screen protector? They aren't without compromise but I've been really impressed with mine.
crash_194 said:
Have you thought about trying a rhino shield glass screen protector? They aren't without compromise but I've been really impressed with mine.
Click to expand...
Click to collapse
Is that a 100% coverage adhesive?
xc rider said:
Is that a 100% coverage adhesive?
Click to expand...
Click to collapse
Is is full screen adhesive, really sticky and does take some work to get all the air bubbles out. It does have a black border which does infringe on the corners of the actual display slightly. It is case friendly so is cut a bit short around the edges. I do however find it a perfect combination with a spigen rugged armour case. It comes with an alignment frame so is easy to get right when putting it on, it is however expensive at £25 but is still significantly cheaper than the whitestone. The oleophobic coating on it is brilliant, however to soon to comment on longevity as only be using it 2 months. I am happy with the compromises of this screen protector as I hate the thought of covering a very expensive phone with loca glue.
Sorry for the partial thread hijack OP!
I've broken two so far, both from dropping the phone... The second break is just on the edge so I haven't bothered to replace it yet. I have the Aliexpress replacement sitting at home, it was $16 for two screens, I figure I'll give it a try, if it doesn't work I'll send my broken Whitestone back and get it replaced again.
mjones73 said:
I've broken two so far, both from dropping the phone... The second break is just on the edge so I haven't bothered to replace it yet. I have the Aliexpress replacement sitting at home, it was $16 for two screens, I figure I'll give it a try, if it doesn't work I'll send my broken Whitestone back and get it replaced again.
Click to expand...
Click to collapse
Do they replace the broken ones for free?
jawsm said:
Do they replace the broken ones for free?
Click to expand...
Click to collapse
if you have registered the product at their site I think if you broke it they send you a replacement for free...you just pay the shipping costs:good:
Does it cause you press the screen stornger or it's smooth as glass protector in non-edge screens?

Categories

Resources