Hey. I've bricked my Huawei P10 lite, literally just for the sole reason alone that I'm an idiot. I was in the process of relocking/unrooting when I did a massive choke - I've relocked the bootloader and IMMEDIATELY closed the goddamn tab. I haven't written the code down anywhere. When I've rebooted my phone, I discovered I have exactly 0 ways of doing a wipe, since the TWRP was obviously gone.
Hitools returns that the phone cannot be recovered due to not being supported.
Recovery? There isn't one. eRecovery always returns "failed to get.." yatta yatta yatta, It's not working.
The only thing currently reacting to my commands is fastboot. And, being the mr. obvious, I cannot push files onto the phone through fastboot to restore it by the full package, which was pretty much my only option at this point.
There aren't any replacement motherboards available for the P10 lite on eBay or pretty much anywhere else I could think of.
If there exists any good soul that can tell me if this is in any imaginable way reversible without getting a cracked screen phone and swapping the motherboards, PLEASE, PLEASE, do tell me.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thank you.
INB4 anyone asks - No, I don't have the numbers to generate the code again either. At least not the serial id, i think.
EvESpirit said:
INB4 anyone asks - No, I don't have the numbers to generate the code again either. At least not the serial id, i think.
Click to expand...
Click to collapse
Did u tryed to flash original firmware by the dload method?
You don need unlocked boatloader for that. I already save my p10 few times.
hdemary said:
Did u tryed to flash original firmware by the dload method?
You don need unlocked boatloader for that. I already save my p10 few times.
Click to expand...
Click to collapse
How can I flash the original firmware? I can't even flash a recovery. The bootloader is l o c k e d, and the only thing I can access is fastboot. How am I supposed to push the files into the phones in fastboot???
EvESpirit said:
How can I flash the original firmware? I can't even flash a recovery. The bootloader is l o c k e d, and the only thing I can access is fastboot. How am I supposed to push the files into the phones in fastboot???
Click to expand...
Click to collapse
Man if you can't even google dload method to find out how to return to stock you r screwed.
But anyways i will help you with that: http://lmgtfy.com/?q=huawei+p10+lite+dload+method
I DO NO HAVE A WAY TO PUSH THE REQUIRED FILES INTO THE DEVICE FOR THE REASONS OF LOCKED BOOTLOADER, NO RECOVERY AND NO WAY TO BOOT INTO THE SYSTEM. If you would kindly tell me how tf would it work from an OTG flash device, go ahead. Spoiler alert: It won't
MOD EDIT: Mind your language
EvESpirit said:
I DO NO HAVE A WAY TO PUSH THE REQUIRED FILES INTO THE DEVICE FOR THE REASONS OF LOCKED BOOTLOADER, NO RECOVERY AND NO WAY TO BOOT INTO THE SYSTEM. If you would kindly tell me how tf would it work from an OTG flash device, go ahead. Spoiler alert: It won't
Click to expand...
Click to collapse
Man as your post title says, you really are a massive dumbass, if you at least try to help your self with the link i send you u will see that dload method dont need to boot into system, no need for recovery and no need for unlocked boatloader, only an sd card with a folder that have original firmware for your variant.
But as you rude keep your phone as a brick.
Regards!
EvESpirit said:
I DO NO HAVE A WAY TO PUSH THE REQUIRED FILES INTO THE DEVICE FOR THE REASONS OF LOCKED BOOTLOADER, NO RECOVERY AND NO WAY TO BOOT INTO THE SYSTEM. If you would kindly tell me how tf would it work from an OTG flash device, go ahead. Spoiler alert: It won't
MOD EDIT: Mind your language
Click to expand...
Click to collapse
Mind your language my friend.
This is an official caution for you.
If you have any doubts, check the FORUM rules
EvESpirit said:
>mfw mods ignore somebody attacking someone first and call me out for using bad language+edit the comment, yet still leave the actual swear happen without deleting
OMEGALUL so relevant
@hdemary If you would kindly learn to read. For the third time I'm telling you that ThErE Is No Way For Me to PUSH the FILES to the PHONE. I do not have an unlocked bootloader nor a functioning recovery AND NO DEVICE to put them on. Also nice OP dodge, but I guess that's just them being unbiasedly biased.
Click to expand...
Click to collapse
My last post in this thread.
Why u ask for help in the first place if you won´t accept?
Have fun with your bricked device!
Best of the best Regards! :angel:
Well, seems this thread has run its course
Thread closed
Related
Tested on PLK-L01 from Germany.
Download the following file:
http://rootjunkysdl.com/getdownload.php?file=Huawei%20P8%20Lite/Huawei%20Product%20ID%20Generator.exe
Insert you IMEI1 and choose "HUAWEI Y300-0000" as model.
Copy the product ID.
On the following picture it is in german, but on the page it is described in english which information you have to enter.
Enter the information on following page: http://emui.huawei.com/en/plugin.php?id=unlock&mod=detail
You have to login via Facebook to get the code and it only works with facebook.
Every Facebook account can unlock two devices every six months.
You will get the unlock code marked red.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Did you tried also to flash something? (Root or xposed)
Piemo said:
Did you tried also to flash something? (Root or xposed)
Click to expand...
Click to collapse
Not until now, but if you have something reliable to flash for rooting I will try it.
There was the guide for rooting the Honor 7, but I don't know if it is only for the chinese version?
Aurevo said:
Not until now, but if you have something reliable to flash for rooting I will try it.
There was the guide for rooting the Honor 7, but I don't know if it is only for the chinese version?
Click to expand...
Click to collapse
Actually I've seen only that one, dunno if it would work. I'm like that my order is "waiting for stock" so other can try for me. XD
Worked for me
Piemo said:
Did you tried also to flash something? (Root or xposed)
Click to expand...
Click to collapse
This method worked for me, so thanks to OP.
As fastboot oem get-bootinfo shows the Bootloader as unlocked.
I flashed a Chinese TWRP from the guide I found elsewhere here. It definitely boots into TWRP and everything works inside TWRP, albeit in Chinese.
Unfortunately, I'm now in a TWRP bootloop and can't get out of it.
I don't have a stock ROM/recovery to re-flash, so I'm hosed until one appears online.
Model PLK-L01
philipcraig said:
This method worked for me, so thanks to OP.
As fastboot oem get-bootinfo shows the Bootloader as unlocked.
I flashed a Chinese TWRP from the guide I found elsewhere here. It definitely boots into TWRP and everything works inside TWRP, albeit in Chinese.
Unfortunately, I'm now in a TWRP bootloop and can't get out of it.
I don't have a stock ROM/recovery to re-flash, so I'm hosed until one appears online.
Model PLK-L01
Click to expand...
Click to collapse
Try the tutorial on gizdev!
haasgo said:
Try the tutorial on gizdev!
Click to expand...
Click to collapse
Is it useful to try it without an recovery image available? Some other user tried it and is in a bootloop now without the possibility to recover.
I also slashed beta-supersu, using the Chinese twrp. I didn't reboot in between flashing twrp and supersu. Maybe I should have.
Thanks!
Works perfect for me
What to do with the unlock code? I mean where to enter it?
Using your tip, I made this http://androidmtk.com/unlock-bootloader-of-huawei-honor-7
rahul964 said:
Using your tip, I made this http://androidxda.com/unlock-bootloader-of-huawei-honor-7
Click to expand...
Click to collapse
I get stuck on the step 10: after I fill everything out, it says "Sorry, you must use a phone account to submit this application."
I had this too. I needed to log in at the first step with a Facebook account. Basically Huawei want a record of who they've given codes to.
philipcraig said:
I had this too. I needed to log in at the first step with a Facebook account. Basically Huawei want a record of who they've given codes to.
Click to expand...
Click to collapse
Yes, it worked.
Did you figure out how to get out of the bootloop? Did you successfully root it?
pappapishu said:
Yes, it worked.
Did you figure out how to get out of the bootloop? Did you successfully root it?
Click to expand...
Click to collapse
Yes, and yes.
philipcraig said:
Yes, and yes.
Click to expand...
Click to collapse
Okay, but the "bootloop part" is necessary, isn't? Did you fix it thanks to duky_duke's post?
http://forum.xda-developers.com/showpost.php?p=62737969&postcount=17
pappapishu said:
Okay, but the "bootloop part" is necessary, isn't? Did you fix it thanks to duky_duke's post?
http://forum.xda-developers.com/showpost.php?p=62737969&postcount=17
Click to expand...
Click to collapse
Yes. Though mine seemed even more complex. I couldn't boot into the bootloader that way.
What I found is that via some combination of volume/power keys and having power plugged in or not, I finally:
* did a boot into safe-mode
* discovered I was rooted
* used to to install ROM manager
* rebooted, out of safe mode
* ran ROM manager
* rebooted to bootloader
And then did what dukey said.
strange i have tried to log using facebook button but it keeps sending me the '"Sorry, you must use a phone account to submit this application."'
any ideas?
Hi,
I got stuck when posting my numbers with the following answer:
We regret to say that the information you are searching is not found. Pleae mail to [email protected], We'll respond to you as soon as possible, thanks.
Click to expand...
Click to collapse
Has anybody else got stuck here or knows how to get around it?
I have not received an answer to the mail I sent them yesterday - I hope somebody replies at all
lippl
The .exe linked in the first post is not required to determine the product ID. It can be determined using universal code *#*#1357946#*#* (which returns an 8-digit code as expected)
Further, the .exe linked in the first post does not get a clean bill of health at VirusTotal - nothing definitive but not clean. Anyone planning to use it to generate an unlock code should use reasonable caution, sandbox the application or (better) run it on a disposable VM.
As you know lots of devices are facing this issue where the device is in bootloop and the bootloader is locked.
I have last hope that if anyone can help me with any one of the solution, I can rescue my nexus 6p.
Device info:
Rom: Android 7.1.1 stock rom
Bootloader: Locked (OEM unlocking not enabled in developer options)
Warranty: Ended on 14th feb 2017
Huawei said motherboard will cost Rs.28000 i.e $400 approx.
I can boot into bootloader menu and recovery as well.
I tried sideloading the OTA zips from google, it flashes successfully but still bootloops.
Note: My device didn't reboot after 90 seconds when it was in bootloader menu also I as I can sideload OTAs successfully, I don't really think that its an hardware issue.
I have 2 options as my last resort.
1. I've read that if you unenroll from Android BETA program, you get an OTA update which wipes your entire device.
BUT for this I must be able to boot which I cannot.
HELP: Can anyone provide me the BETA unenrolled OTA link so that I can try sideloading it?
2. I've also read that we can flash all partitions of nexus 6p in EDL mode refer:https://forum.xda-developers.com/nexus-6p/general/howtos-debrick-nexus-6p-stuck-edl-9008-t3552838
Files included in zip are attached below.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
HELP: As per thread only way to boot into EDL mode is by ADB which I can't access as my phone doesn't boot up.
Can anyone help me with booting my device into EDL mode so that I can try flashing this file.
* I CAN'T AFFORD NEW MOTHERBOARD, I'm just a student.
aakash dabrase said:
I have 2 options as my last resort..
Click to expand...
Click to collapse
Sorry, but your only option is a new phone.
v12xke said:
Sorry, but your only option is a new phone.
Click to expand...
Click to collapse
me i have the same prob but my phone unloked and i can enter in fastboot mode i have chance to rescue my phone
leroilion02 said:
me i have the same prob but my phone unloked and i can enter in fastboot mode i have chance to rescue my phone
Click to expand...
Click to collapse
You are hijacking another thread. Back in the first thread you started on this same topic: https://forum.xda-developers.com/member.php?u=5737579 Enter those commands in fastboot and capture the resulting text. Please post the results in your original post. Not here.
v12xke said:
You are hijacking another thread. Back in the first thread you started on this same topic: https://forum.xda-developers.com/member.php?u=5737579 Enter those commands in fastboot and capture the resulting text. Please post the results in your original post. Not here.
Click to expand...
Click to collapse
please bro can you tell me what i can do step by step
Have you tried to wipe data and cache I recovery?
leroilion02 said:
please bro can you tell me what i can do step by step
Click to expand...
Click to collapse
I already did 3 days ago in the first thread you started on this:
https://forum.xda-developers.com/showpost.php?p=71699404&postcount=15
I have the same problem with my Nexus 6p. I have switched to an iphone 7.
Is Google a serious organization to let so many users suffer because of their problems? I mean this really HAS to be seriously unethical company to do this. As for Huawei, well- we should have known and expected such behavior. At the end of the day it is a Chinese brand... so it needs to maintain its low levels of reputation to be worthy of its fine name.
So, pretty much a long time lurker and much lover of this site. I do quite a few roots on various devices for my job (computer forensics) and I've rooted a Galaxy S8 and its stuck on the Samsung boot logo and I desperately need to get it out without wiping the data on it!
The annoying part, is I did this a few days earlier to a test S8, all the same apart from the build number and it was bloody flawless. I got root access. Did it to another device and it crapped out.
I used cfar_samsung_sm-g950f_dreamltexx_nrd90m.g950fxxu1aqi7_adt0.zip direct from firmware.mobi (for both devices - first was obviosuly a different build number).
I'm in a bit of a panic mode at the moment. I tried this:
https://forum.xda-developers.com/v20/how-to/how-to-fix-twrp-bootloop-t3513580
After attempting root on my replacement phone, I could NOT boot to system. Each time I rebooted to "System", it would boot straight to TWRP over and over. I tried reflashing stock files. No verity patching.. etc.
The Fix:
Download the latest version of TWRP specific to your device here https://build.nethunter.com/test-builds/twrp/lge/
Flash the file and the device should now be able to boot to system. If that doesn't work try another version.
I spoke to @jcadduono about my problems and he believes there may have been something weird going on in the misc partition. Reflashing TWRP will/should fix the problem.
Thanks @jcadduono for all the support.
Click to expand...
Click to collapse
But it did not work. I can get into TWRP Recovery with it (and into Download mode) but TWRP wont kick it out of the boot loader issue. I've tried installing super user and all sorts, but I can't mount Data to actually achieve anything?
Please, any help is much appreciated. If there is anything obvious I'm missing please tell me.
Thanks,
DG.
First of all, I would like to ask for mod/s to have this move to proper thread section.
What is the exact model of your S8?
What is your TWRP version you installed?
@DanGlee
Can you show us the picture of twrp error you get?
You mentioned this
"but I can't mount Data to actually achieve anything?"
Can you send us the exact error of twrp and post it in here? It could be that data partition is corrupted, and if it is, then there's no way we could get your data back.
But if you can get /data partition mounted, then you could make a backup in twrp and reflash everything to stock.
Apologies for not posting this in the correct place. It's a minefield of threads.
I don't have the phone infront of me at the no, bit will do it first thing in the morning.
Thanks.
you cannot mount data if you don't FORMAT DATA first
batuzai04123 said:
First of all, I would like to ask for mod/s to have this move to proper thread section.
...
Click to expand...
Click to collapse
DanGlee said:
Apologies for not posting this in the correct place. It's a minefield of threads.
...
Click to expand...
Click to collapse
Thread moved :good:
Wood Man
Forum Moderator
manups4e said:
you cannot mount data if you don't FORMAT DATA first
Click to expand...
Click to collapse
Yes , forgot about that.
If data mounted is inaccessible, your only option is to format data partition, which sadly, erase all your data from your phone.
Sorry @DanGlee you won't be able to retrieve your data anymore.
Thanks for the replies.
Its definitely not sounding good.
As an update as promised anyway, here are some details requested.
Its an Galaxy S8 SM-950F (UK) with Build Version ending ...AQI7
(Running Android 7)
I've put TWRP 3.1.0-1 on it.
I can't really see any error codes or anything, but here are some images of it failing to install SuperUser.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks for the responses. You guys genuinely are helpful and if you say its FUBAR then I trust your diagnosis. (I think I was just clutching at straws that I might be able to salvage something!)
Thanks,
DG.
Edit, I can't upload images. XDA is being an arse. I just want to put in this link [insert_https_here]://imgur.com/gallery/Teceb
DanGlee said:
Thanks for the replies.
Its definitely not sounding good.
As an update as promised anyway, here are some details requested.
Its an Galaxy S8 SM-950F (UK) with Build Version ending ...AQI7
(Running Android 7)
I've put TWRP 3.1.0-1 on it.
I can't really see any error codes or anything, but here are some images of it failing to install SuperUser.
Thanks for the responses. You guys genuinely are helpful and if you say its FUBAR then I trust your diagnosis. (I think I was just clutching at straws that I might be able to salvage something!)
Thanks,
DG.
Edit, I can't upload images. XDA is being an arse. I just want to put in this link [insert_https_here]://imgur.com/gallery/Teceb
Click to expand...
Click to collapse
Unlucky i don't think you can recover your file. I took a look and didn't find anything. Please pay attention at what you do when rooting or doing anything to your phone. First you need to see all the steps to avoid problems like this!
If can help i used this very simple guide to root my phone [YOUTUBE]https://www.youtube.com/watch?v=L_lsVsbujYg
[/YOUTUBE]
please help me.
I have completely wiped my device. nothing is there in internal storage. Just the TWRP folder.
it has unlocked bootloader and twrp installed
but it is the unrooted device.
so please tell me what is best for me?
shall I root it or can I directly go to stock Oero?
I have already downloaded stock file '8.1.0 (OPM6.171019.030.E1, Jul 2018)- angler-opm6.171019.030.e1-factory-1abcb2f1.zip'
I am confused, how should I proceed?
please explain me stepwise, so I can save my phone.
smartpreet said:
please help me.
I have completely wiped my device. nothing is there in internal storage. Just the TWRP folder.
it has unlocked bootloader and twrp installed
but it is the unrooted device.
so please tell me what is best for me?
shall I root it or can I directly go to stock Oero?
I have already downloaded stock file '8.1.0 (OPM6.171019.030.E1, Jul 2018)- angler-opm6.171019.030.e1-factory-1abcb2f1.zip'
I am confused, how should I proceed?
please explain me stepwise, so I can save my phone.
Click to expand...
Click to collapse
You will be fine I wipe my internal from time to time. Just make sure you update your bootloader and vendor. If you use the flash all I'm pretty sure it's done for you but if using fastboot method follow the steps in the hiesenberg guide. Just so you know once on the latest Oreo builds from what I've read can no longer downgrade. I haven't verified or read up on it myself but maybe look into if you think you might want to go back to nougat .
Exodusche said:
You will be fine I wipe my internal from time to time. Just make sure you update your bootloader and vendor. If you use the flash all I'm pretty sure it's done for you but if using fastboot method follow the steps in the hiesenberg guide. Just so you know once on the latest Oreo builds from what I've read can no longer downgrade. I haven't verified or read up on it myself but maybe look into if you think you might want to go back to nougat .
Click to expand...
Click to collapse
i have tried that earlier, but still i got the red triangle.
since i failed to go to stock today i installed latest twrp-3.2.2-0-angler using latest SDK tool.
then i flashed Magisk-v16.0 and then ResurrectionRemix-M-v5.7.4-20161008-angler and it immediately went to google logo and stuck there.
just use this to get back to stock https://developers.google.com/android/images
all you do is boot in to fast boot plug into pc and run flash all
there are ways to save data but you already wiped so no need
if your still confused just look up a guide of how to flash factory images and install the usb drivers
billycar11 said:
just use this to get back to stock https://developers.google.com/android/images
all you do is boot in to fast boot plug into pc and run flash all
there are ways to save data but you already wiped so no need
if your still confused just look up a guide of how to flash factory images and install the usb drivers
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
these are my files.
as you said i I had connected the phone and double-click the flashall
the process started and finish but still i am on google logo.it keeps booting to logo. nothing else is happening
smartpreet said:
these are my files.
as you said i I had connected the phone and double-click the flashall
the process started and finish but still i am on google logo.it keeps booting to logo. nothing else is happening
Click to expand...
Click to collapse
What did the command line windows say when it was flashing
billycar11 said:
What did the command line windows say when it was flashing
Click to expand...
Click to collapse
smartpreet said:
Click to expand...
Click to collapse
It looks good but didn't seem to flash radio and bootloader maybe just not in screen shot should boot but if it still won't boot in to the stock recovery and factory reset might help
You could have the bad big cores try flashing one of the 4 core fixes. Also I wait to flash magisk until after first boot. It can hang you on the Google screen .
Hi. During the update to Android 10 the phone turned off and after switching on it goes into recovery mode.
The phone is not mine and this description was provided to me by the owner of the phone. I was unable to see the phone directly because of the quarantine, so as a first solution I thought about a restore via odin. Has anyone had this problem? And is there a less drastic way than Odin to solve? Because the owner has some data that he would prefer not to lose.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How did you get android 10 on j530f?
I get the same messages when I enter recovery but I'm able to get out. You could use odin to reflash the firmware but keep all the data.
You won't be able to do a thing with Odin if the device doesn't have an unlocked bootloader and USB debugging enabled which I doubt it has seeing as it's a stock update that was attempted.
What happens to the device once plugged into a PC? Is the data corrupt or is the device recognized and files can be seen?
I have the same problem with almost the same recovery messsges. It also says dm verity failed. Odin and samsung 300k tool both dont work.
myusernamesucks said:
I have the same problem with almost the same recovery messsges. It also says dm verity failed. Odin and samsung 300k tool both dont work.
Click to expand...
Click to collapse
Hi,
can you give some details what has happened?
I think you have to install TWRP. Otherwise you have no chance to debug anything...
Emelin.2004 said:
How did you get android 10 on j530f?
I get the same messages when I enter recovery but I'm able to get out. You could use odin to reflash the firmware but keep all the data.
Click to expand...
Click to collapse
I don't know how the phone has Android 10, as I said "The phone is not mine and this description was provided to me by the owner of the phone", sorry.
garylawwd said:
You won't be able to do a thing with Odin if the device doesn't have an unlocked bootloader and USB debugging enabled which I doubt it has seeing as it's a stock update that was attempted.
What happens to the device once plugged into a PC? Is the data corrupt or is the device recognized and files can be seen?
Click to expand...
Click to collapse
Not even to flash a stock firmware? It seems strange to me, in the past I have often used odin on my S2 also for the stock ROM.
The device always reboot in recovery, I don't think the PC can see it.
jaggedN said:
Hi,
can you give some details what has happened?
I think you have to install TWRP. Otherwise you have no chance to debug anything...
Click to expand...
Click to collapse
Hi, the details were given to me by another person, the only thing that I (and this person knows) is that the phone during an update has turned off and reboots in the attached image window.
Thanks for the tips, I will report it to the person concerned, hoping that he can install the twrp.
TheNightmare97 said:
I don't know how the phone has Android 10, as I said "The phone is not mine and this description was provided to me by the owner of the phone", sorry.
Not even to flash a stock firmware? It seems strange to me, in the past I have often used odin on my S2 also for the stock ROM.
The device always reboot in recovery, I don't think the PC can see it.
Hi, the details were given to me by another person, the only thing that I (and this person knows) is that the phone during an update has turned off and reboots in the attached image window.
Thanks for the tips, I will report it to the person concerned, hoping that he can install the twrp.
Click to expand...
Click to collapse
Put the j5ylte update onto sd card.
Get the update from updato or sammobile or somewhere.
Then reboot stock recovery and apply update from sd card. Or sideload it using adb on a computer. Not very complicated at all
Install the stock rom like i described here: https://forum.xda-developers.com/galaxy-j5/help/to-stock-rom-t4099857
jaggedN said:
Hi,
can you give some details what has happened?
I think you have to install TWRP. Otherwise you have no chance to debug anything...
Click to expand...
Click to collapse
I cant even access download mode neither can I apply an update from SD card. It says dm-verity failed. System is completely stock. I didn't modify anything.