Database Users

[Q] Stuck in bootloop and nothing I tried works!

UPADTE: My nvram folder is also gone. Is there anything at all to be done? Or have I purchased a paperweight?
UPDATE: Found out its my IMEI which has disappeared during the OTA from 4.2.2 to 4.3. This happened while 100% stock. Anyway I can get it back? Or at least boot Kitkat?
So my Nexus 4 stopped working after I finally decided to update it to 4.4.2. It was stuck at the starting apps loader then shut off. I proceeded to turn it back on but it got stuck in a bootloop. I’ve tried re flashing 4.3 through fastboot. It seems to flash fine (With the added error that "x".sig was not found) but again gets stuck at a bootloop. Ive tried flashing 4.4.2 the same way (with the same added error) to the same result. I also tried adb sideloading them but it either gave me a "status 7" or "E: signature verification failed". When I tried to "Fastboot update" it gave me the error that the partition to flash it on did not exist. im stumped. Don't know what else to try. Anything?
Note:
-I am not rooted
-USB debugging is not enabled (and now I cant since it doesn’t boot to OS)
-I'm on Ubuntu 13.10
-Also got Windows
- I got the files that I tried to install from here https://developers.google.com/android/nexus/images
Thanks! :good:

I had the same issue and the solution was flashing stock android by Ncry (http://goo.gl/l0iuEn). If you havent used this software, go to the one click menu with the phone on bootloader mode.
Hope this helps!

dinuweera said:
I had the same issue and the solution was flashing stock android by Ncry (http://goo.gl/l0iuEn). If you havent used this software, go to the one click menu with the phone on bootloader mode.
Hope this helps!
Click to expand...
Click to collapse
Thanks! I would like to try his software but I cant. I only have Ubuntu on my computer as of right now. Should I still try with wine emulation?

Pirlo#21 said:
Thanks! I would like to try his siftware but I cant. I only have Ubuntu on my computer as of right now. Should I still try with wine emulation?
Click to expand...
Click to collapse
I tried on windows and it didnt work with it I cant get past the GOOGLE boot screen :/

Try this guide: http://forum.xda-developers.com/showthread.php?t=2010312 if you can get access to a Windows machine.

audit13 said:
Try this guide: http://forum.xda-developers.com/showthread.php?t=2010312 if you can get access to a Windows machine.
Click to expand...
Click to collapse
I just tried the same commands on Linux and everything installed fine. But I cant get past this screen
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
it says like this forever. Anything?

Did you try wiping cache, Dalvik, and data? Factory reset?

I did. Even tried from fastboot. What if I reinstall the system. And then apply an update from sideload?
Sent from my GT-N7105 using XDA Premium 4 mobile app

Can you copy the list of text from the command window when you do the flash-all.bat.

Urgent Help Needed!

My phone MOTO X PLAY got bricked after trying to root using the method specified in this site
http://theunlockr.com/2015/09/21/root-motorola-moto-x-play/
everything was success until the 4th step, successfully unlocked bootloader, installed recovery etc
after flashing superSu and rebooted phone stucked on boot screen
Then i wiped Dalvic Cache , System, Data partitions etc. ( I was dont know what to do )
Now the recovery says No OS installed
What should i do now?
I tried installing the rom on the below post,
http://forum.xda-developers.com/moto-x-play/general/moto-x-play-marshmallow-6-0-ota-t3267061
But its is also failed and got error with code 7 and it says this device has Motorola/omni_luz/lux:5.1.1/LYZ28J/sultan02101841 : userdebug/test-keys
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm confused to what to do now and i'm not expert in this. Please some one help me on this isssue

fr3akb0y said:
My phone MOTO X PLAY got bricked after trying to root using the method specified in this site
http://theunlockr.com/2015/09/21/root-motorola-moto-x-play/
everything was success until the 4th step, successfully unlocked bootloader, installed recovery etc
after flashing superSu and rebooted phone stucked on boot screen
Then i wiped Dalvic Cache , System, Data partitions etc. ( I was dont know what to do )
Now the recovery says No OS installed
What should i do now?
I tried installing the rom on the below post,
http://forum.xda-developers.com/moto-x-play/general/moto-x-play-marshmallow-6-0-ota-t3267061
But its is also failed and got error with code 7 and it says this device has Motorola/omni_luz/lux:5.1.1/LYZ28J/sultan02101841 : userdebug/test-keys
I'm confused to what to do now and i'm not expert in this. Please some one help me on this isssue
Click to expand...
Click to collapse
WHAT ARE THE ODDS, same thing happened to me on that site, and I tired on that site's method too... It bricked me phone too. I couldn't think of anything else to do so i tried to played dumb with the clerk of the place I bought my Moto x Play. they gave me back my money and I bought a new one, after that I used the method on XDA site, and nowhere else.

HerySean said:
WHAT ARE THE ODDS, same thing happened to me on that site, and I tired on that site's method too... It bricked me phone too. I couldn't think of anything else to do so i tried to played dumb with the clerk of the place I bought my Moto x Play. they gave me back my money and I bought a new one, after that I used the method on XDA site, and nowhere else.
Click to expand...
Click to collapse
Is there any way to get a ROM for X Play?

since you already have twrp installed, try flashing stock rom in this page - http://forum.xda-developers.com/moto-x-play/general/rom-xt1563-brasil-stock-6-0-twrp-t3272979

pijes said:
since you already have twrp installed, try flashing stock rom in this page - http://forum.xda-developers.com/moto-x-play/general/rom-xt1563-brasil-stock-6-0-twrp-t3272979
Click to expand...
Click to collapse
Thanks for the reply,
Post says to copy the zip file to twrp Backup folder.
But how can i copy without booting the device ?

fr3akb0y said:
Thanks for the reply,
Post says to copy the zip file to twrp Backup folder.
But how can i copy without booting the device ?
Click to expand...
Click to collapse
Micro SD card

fr3akb0y said:
Thanks for the reply,
Post says to copy the zip file to twrp Backup folder.
But how can i copy without booting the device ?
Click to expand...
Click to collapse
You could reboot the phone into recovery and connect the phone to the computer. You could then mount the USB storage onto the computer and simply copy paste the zip into the storage. Although I'm not up to date with the features of the current TWRP, but the mount USB storage option was present in a previous version of it. I dunno whether it's still there or not, but still worth a try.

Thanks a lot! it worked

Galaxy J5 (2017) stuck in recovrey mode.

Hi. During the update to Android 10 the phone turned off and after switching on it goes into recovery mode.
The phone is not mine and this description was provided to me by the owner of the phone. I was unable to see the phone directly because of the quarantine, so as a first solution I thought about a restore via odin. Has anyone had this problem? And is there a less drastic way than Odin to solve? Because the owner has some data that he would prefer not to lose.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

How did you get android 10 on j530f?
I get the same messages when I enter recovery but I'm able to get out. You could use odin to reflash the firmware but keep all the data.

You won't be able to do a thing with Odin if the device doesn't have an unlocked bootloader and USB debugging enabled which I doubt it has seeing as it's a stock update that was attempted.
What happens to the device once plugged into a PC? Is the data corrupt or is the device recognized and files can be seen?

I have the same problem with almost the same recovery messsges. It also says dm verity failed. Odin and samsung 300k tool both dont work.

myusernamesucks said:
I have the same problem with almost the same recovery messsges. It also says dm verity failed. Odin and samsung 300k tool both dont work.
Click to expand...
Click to collapse
Hi,
can you give some details what has happened?
I think you have to install TWRP. Otherwise you have no chance to debug anything...

Emelin.2004 said:
How did you get android 10 on j530f?
I get the same messages when I enter recovery but I'm able to get out. You could use odin to reflash the firmware but keep all the data.
Click to expand...
Click to collapse
I don't know how the phone has Android 10, as I said "The phone is not mine and this description was provided to me by the owner of the phone", sorry.
garylawwd said:
You won't be able to do a thing with Odin if the device doesn't have an unlocked bootloader and USB debugging enabled which I doubt it has seeing as it's a stock update that was attempted.
What happens to the device once plugged into a PC? Is the data corrupt or is the device recognized and files can be seen?
Click to expand...
Click to collapse
Not even to flash a stock firmware? It seems strange to me, in the past I have often used odin on my S2 also for the stock ROM.
The device always reboot in recovery, I don't think the PC can see it.
jaggedN said:
Hi,
can you give some details what has happened?
I think you have to install TWRP. Otherwise you have no chance to debug anything...
Click to expand...
Click to collapse
Hi, the details were given to me by another person, the only thing that I (and this person knows) is that the phone during an update has turned off and reboots in the attached image window.
Thanks for the tips, I will report it to the person concerned, hoping that he can install the twrp.

TheNightmare97 said:
I don't know how the phone has Android 10, as I said "The phone is not mine and this description was provided to me by the owner of the phone", sorry.
Not even to flash a stock firmware? It seems strange to me, in the past I have often used odin on my S2 also for the stock ROM.
The device always reboot in recovery, I don't think the PC can see it.
Hi, the details were given to me by another person, the only thing that I (and this person knows) is that the phone during an update has turned off and reboots in the attached image window.
Thanks for the tips, I will report it to the person concerned, hoping that he can install the twrp.
Click to expand...
Click to collapse
Put the j5ylte update onto sd card.
Get the update from updato or sammobile or somewhere.
Then reboot stock recovery and apply update from sd card. Or sideload it using adb on a computer. Not very complicated at all

Install the stock rom like i described here: https://forum.xda-developers.com/galaxy-j5/help/to-stock-rom-t4099857

jaggedN said:
Hi,
can you give some details what has happened?
I think you have to install TWRP. Otherwise you have no chance to debug anything...
Click to expand...
Click to collapse
I cant even access download mode neither can I apply an update from SD card. It says dm-verity failed. System is completely stock. I didn't modify anything.

Boots only to TWRP - Need help fixing

Hi there. About a year or so ago I went about flashing my Tab but it went wrong and now all I can do is get it to boot to TWRP. Would someone be so kind as to tell me step by step what to do to get it back working? I'd prefer it to go back to stock ROM without TWRP or other 3rd party flash programs but I'll take what I can get. Help appreciated.
This is what I get when it boots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Bump.

fuzzyreets said:
I'd prefer it to go back to stock ROM without TWRP
Click to expand...
Click to collapse
Did you try booting to DL-mode (via adb reboot for example) and flash a stock ROM with ODIN?

DHGE said:
Did you try booting to DL-mode (via adb reboot for example) and flash a stock ROM with ODIN?
Click to expand...
Click to collapse
I got a reply! Thank you!
No I didn't try that. To be honest I used to flash android stuff all the time but kind of having been doing much of that stuff the last few years so I don't remember how to do any of that. If you were so kind to provide me a link or walkthrough on what to do that would be HUGELY appreciated. Thanks for the reply.

fuzzyreets said:
No I didn't try that. To be honest I used to flash android stuff all the time but kind of having been doing much of that stuff the last few years so I don't remember how to do any of that. If you were so kind to provide me a link or walkthrough on what to do that would be HUGELY appreciated. Thanks for the reply.
Click to expand...
Click to collapse
What was the goal when you started down the path of installing TWRP? It seems like you might have been part way there if you got that far?
There are Lineage install instructions here. <-- More importantly Odin Download if you don't already have it.
If you decide to try Lineage, the latest builds require new firmware found here. It can also be obtained by returning to stock and updating.
Anyways If you are in TWRP, in the restart menu there is an option to restart to download. If will reboot to a black screen, just hit the power button once when the screen goes off. Before you do this, you need to obtain stock firmware, from somewhere. (Sammobile or something like that) You will also need Odin, link above.
As with anything proceed at your own risk.
Once you have those files, you can extract the firmware. They will be labeled and go into those spots in Odin, AP, BL, CSC, then you should be able to hit start. I'm going from memory, as I haven't had to restore mine since I got it (and looking at the files in stock firmware file).

Idk how relevant this is anymore but I had this same issue after I install lineage 18, there's a multi-disabler zip I got awhile ago that fixes all my flashing problems related recovery loop. Just Google that zip, flash it then format and restart. That what I've done easy fix, this assumes you followed the basic steps to properly flash whatever it is you're trying to.

Question Help……Is there still warranty for brick the phone

This machine got bricked by me… Stuck at fast boot not turning on

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Purchase, Root, Use, Brick, Contact For Support, Just in one day……

how did you brick it?

Just wait for the factory or full OTA image to unbrick

Qiyue_ said:
Purchase, Root, Use, Brick, Contact For Support, Just in one day……
Click to expand...
Click to collapse
I warn you to wait slowly with your root without test another things.
You are not brick, you must only reinstall rom, you can always access fastboot/Bootloader
Have you tried to access to Recovery ?

Me also bricked my nothing phone 1 but it's bootloader is locked
I have only access to fastboot
When i try to boot in recovery or system it's boot into fastboot
I was trying to install dynamic system update from developer option. While phone was installing dsu phone has turned off for rebooting and never turned on again.
How can i get full rom for nothing os and flash tool

Pho3nX said:
I warn you to wait slowly with your root without test another things.
You are not brick, you must only reinstall rom, you can always access fastboot/Bootloader
Have you tried to access to Recovery ?
Click to expand...
Click to collapse
I tried to use fastbootd for accessing system_b but after once I tried I can’t open this mode again, same as recovery.

Qiyue_ said:
I tried to use fastbootd for accessing system_b but after once I tried I can’t open this mode again, same as recovery.
Click to expand...
Click to collapse
And right now it’s just bootloader, the warn of the bootloader unlock sigh didn’t even come up

Displax said:
Just wait for the factory or full OTA image to unbrick
Click to expand...
Click to collapse
You also need the unbricking tool like MsmDownloadTool to flash full rom right? Having the rom file isn't enough.

Displax said:
Just wait for the factory or full OTA image to unbrick
Click to expand...
Click to collapse
Pheggas said:
You also need the unbricking tool like MsmDownloadTool to flash full rom right? Having the rom file isn't enough.
Click to expand...
Click to collapse
You will find the latest Full Nothing OS 1.1.0 HERE
@Displax , I don't know if MsmDownloadTools is operationnal for the Phone(1) because it mainly concerns all devices produced by the BBK Electronics consortium.
I don't know if someone want to try, you will find here the link to MsmDownloadTools