Hello people ...
not much to say ...
i think i bricked my phone .... =(
i installed one of the ROM downloaded from here ...
and it brick my device ...
what should i do ? :`(
it says on the screen :
" Your OS ROM isn't customized for you hardware.
Please refresh the proper ROM code or contact the service center. " ((
p.s. i cant install other ROM
couse it cant see the usb (((
i got the problem solved =)
guess it came from it self couse i was nurvios )))
i entered the hard boot menu pressed the UP (volume) button and then pressed 2 time i think the up(coluve) and down(volume) then it not entered the boot option but connected the USB ...
i installed other ROM and its working fine again ... )))))
so far I have seen 1000 people on xda developers that assume to have bricked their phone...and probably 1 out of 1000 has truly done something stupid to brick his phone.
[email protected] said:
so far I have seen 1000 people on xda developers that assume to have bricked their phone...and probably 1 out of 1000 has truly done something stupid to brick his phone.
Click to expand...
Click to collapse
And then there are the 999 who think they have done something clever, but still bricked their phone...
gladly im not one othe 1\1000 people that done it =)
i had my luck on this one =)
i guess i was celebrated too early...
i tryed to delete the HSPL
by the video tut ... ( yeh yeh ... what can be more easier )
well ...
it says to get a stock rom ( i did it )
it say to put it on the SD after formating it to 32 bit ( i did it )
then hard boot ... ( i did it )
power button ...
and ........... puff ...
now i get: ( On boot ):
PB81100 HX-BC
SPL-1.42.0000 XE
microP(LED) 0x05
microP(TOUCH) 0x03
Upgrage ROM code error
Please try again ...
WHAT IS THAT ? :`(
dose it means i brick it ?
(p.s.)
Tryed to install the HSPL again ...
the install is successfull. ... but no change on the device ...
you have used the wrong rom.
you must use the correct rom that was on the phone when you got it.
Or the correct region. In doubt, just enter your phone's serial number on the HTC download page (here for 1.66) to make sure you get the correct official rom.
Then extract it, put the nbh on your card, etc.
" Sorry, this software download is not suitable for your device. "
hhmm .... i had the hong kong rom originaly ...
maybe it means i have to download it from an hong kong htc site ?
yes....choose the hk site
Are you solved the problem?
How?
I have a similar problem.
I have the same screen at boot, but when I try load anything my device as stuck in progress bar (0%) even for shipped rom’s…
This happens when I try load a shipped rom from SD. Before that I have loaded several cocked rom’s from SD without problem.
the fix...
hold volume up and down together and insert the USB cable then run a different or a good ROM
Bricked friends hd2!!!?!?
PLEASE HELP... I was trying to install android throught NAND on my friends hd2,, in the process of flashing the ROM via Magdalr or whatever.. it froze so i pulled the battery.... and it doesn't turn on. I've pulled the battery on my other friends HD2 so im confused as to why this one in particular does not turn on! PLEASE HELP!!! SHE'LL KILL ME IF SHE FINDS OUT!!!
EDIT: PHEW i figured it out... but im having trouble installing these ROMs
Did i brick my phone??
So my brother was trying to do who knows what to my hd2 and now the hd2 powers on and it says "stick together" (its a t-mobile hd2) and it just stays on that screen.. I'm not the most tech savvy person so bare with me... usually below where it says "stick together" it would show a bunch of numbers and codes and after a few seconds it would load windows mobile and the phone would work fine. However, mine just stays on the stick together and theres no more of those numbers and codes on the bottom.
Did he just brick my phone? And if he did... HOW THE HECK DO I FIX THIS???
HELP :*( i need to use my phone!!
Thanks
Heh I'm in the process of doing my very first flash to get a full install of Andriod 2.2 on my HD2, once I find out a specific answer I've been looking for I'm gonna start the process
HD2 brick
I just bricked my HD2 (USA T-Mous). I tryied update RADIO when was progress on PC 100% in PDA 96% and freezed. I just pulled battery and phone is bricked. When I connect to PC via USB, i can listen twice short plug sound and this is all. No bootloader, nothing. Any reason? Thanks
Did you try to turn on your mobile pushing "vol down" to load usb mode ?
After that, you can flash an official rom.
That "saves" my Leo...
NarkotiQUE said:
I tryied update RADIO
Click to expand...
Click to collapse
if the radio had 51 in the version (example 2.07.51.xx) then it is a brick, dead, gone.
NarkotiQUE said:
I just bricked my HD2 (USA T-Mous). I tryied update RADIO when was progress on PC 100% in PDA 96% and freezed. I just pulled battery and phone is bricked. When I connect to PC via USB, i can listen twice short plug sound and this is all. No bootloader, nothing. Any reason? Thanks
Click to expand...
Click to collapse
Did you have any luck? Does your device have HSPL? Let me know if you still need assistance.
xtntx said:
Hello people ...
not much to say ...
i think i bricked my phone .... =(
i installed one of the ROM downloaded from here ...
and it brick my device ...
what should i do ? :`(
it says on the screen :
" Your OS ROM isn't customized for you hardware.
Please refresh the proper ROM code or contact the service center. " ((
p.s. i cant install other ROM
couse it cant see the usb (((
Click to expand...
Click to collapse
hi i'm looking for a motherboard htc hd2 bricked? can you sell yours?
hello ,
yesterday i tried to flash my omnia II for the first time , and it seems that it will be the last one
i made every single step as it should be , i was upgrading to the original version I8000NXXJB3 ... my pc operating system is win xp ..
but after starting it stucks while downloading img to ram ... and i tried to reflash it but it used to stuck on different values every time like 41% , 39 % , 75 % ... and it reached once 99% and then stopped .
now for sure when i turn it on it shows the ( download mode ) screen but nothing else , and i couldnt format it using buttons method as it has no operating system of course .....
any help please ? and is there another method to flash the rom ( as to use the sd card ) ?
Are you using octans and the correct drivers for flashing? try downloading a different rom!! for example.. maybe you´re trying with jd5 try with jh2!! or maybe.. try flashing 1 thing!! Start with eboot, then csc, then pda, and maybe if you wanna try the phone!! sometime i have the same problem.. the solution was veeery simple!!! Don´t worry!!
.... $$$
na wnoooooo .....
Hey Guys .. How u doin?
Ok now ..
i wanted 2 Flash The linuxDX kernel 2 my phone
Thru the Flashtool .. On my Pc
Anyway
Downloaded The file put it in place ..
Turned off the phone (( i FORGOT 2 TICK THE USB DEBUGGING )) !
So Turned the flasher On .. Clicked on Flash
i selected the LinuxDX on the Right there was Loader.sin And kernel.sin
i've chosen Both .. Anyway .. While Flashing .. Got an Error
Telling me 2 Tick the usb debugging .. I said no problem
Disconnected the phone
Then clicked the power button..
shakes .. Then nothin ..
Wtf???? Screen is Dead??
i waited .. so it goes on
Tried 2 call with another phone ..
its off.. Uhmm???????
..
Okay
No problem
Turned SEUS ( sony ericsson update service )
Started the repairing Process
The phone is connected FINE!!
software is downloaded .. Damn !!
Installing the software ..
Wait ..
It's Stuck .. ?
waited even more..
Still stuck :S ??
After a while i got this:
__________________________________________________ _______________
The installation Failed
Please disconnect the phone and make sure the battery is fully charged before trying. if the problem presists, please contact support.
For more information and help please See .. ETC !!
__________________________________________________ _______________
So now .. i go back to you guys..
Please??
Help my little Device
:/ !!!
did u unlock your bootloader before flashing the kernel?
dmcb123 said:
did u unlock your bootloader before flashing the kernel?
Click to expand...
Click to collapse
Yes i Did !!
I REALLY NEED HELP!
please follow on this Thread http://forum.xda-developers.com/showthread.php?t=1294021
Have u got the .ftf file for the 015 baseband?
Hi!
First ...THANKS @AdamOutler
Trying several ICS Customs Roms , after installing one of the ROM,the device no longer wanted to open !!!
( Before this operation.....flashing more roms ... I left without support usb funtion- very rarely or never connect on USB cable)
Tring to repair into aut. center ....no succes..they said they found traces of oxidation phone - because water.... ???
Ok ! but...can not pay for a repair more than we gave new phone ...isn't true ?
After that after few days tring to connect USB cable on Windows 7....I saw : update driver - Samsung SEC S5PC110 TEST B/D - unrecognized driver ...and windows did not want to install it ! OK ...was the first good sign after almost a week of downtime ....
Knowing the AdamOuter's tutorial....I only tried to revive him ..but each time unsuccessfully !!??
After almost a week since the phone was opened and no battery - today I try again the UnBrickable Resurrector method....and without touching it only after a few seconds....Big surprise !!!, resurrector work and was able to reinstall ( with fastboot - cmd) bootloader.img, boot.img and recovery.img
After that , into recovery I chose to reinstall the initial version 2.3.3 ( luckily mine was on the sdcard ) ...everything went magnificent ! ...but only up here .
tring to reboot devices ....device boot ....but again surprise...and not well .
Now the screen is dark yellow shadows....I do not think anything can be done to repair this defect....and USB connection problem remained the same ( USB not connected !)
( The shadows are now everywhere, the keyboard, the wallpapers on the menu, the bootloader but not in original recovery menu !)
In my opinion I think it might be graphics card fault but may be any....and why USB cable now does not want to connect ....and into ubunto with UnBrickable Resurrector it was able to connect ? ..very very strange !
I have all the driver installed into win 7 even samsung for Odin....trying all methods of connecting ( with USB debugging - on - off) - ....charging only works !
...wait your advice and opinions ! Thanks in advanced ...
Cheers,
surdu_petru
Hi!
Nobody can tell me if it is possible to damage the screen or video card after a ICS custom rom installation ?
If it not possible then I think that those in rep. service changed my screen, because I refused to pay reparation. ( before repair ,I was informed that I have to pay for this , but I refused and they sent me the phone back in a few days without repaired....) .
Now I have it queries....maybe the screen it was bricked after last custom flash ...or those in the service changed my screen - thinking that I will not fix it.
If anyone is willing to try this custom ??? to see about what happens afterwards ...then I'll post this custom rom...but attention you'll brick your device and only solution is AdamsOutler tools ...
surdu_petru said:
Nobody can tell me if it is possible to damage the screen or video card after a ICS custom rom installation ?
If it not possible then I think that those in rep. service changed my screen, because I refused to pay reparation. ( before repair ,I was informed that I have to pay for this , but I refused and they sent me the phone back in a few days without repaired....) .
Now I have it queries....maybe the screen it was bricked after last custom flash ...or those in the service changed my screen - thinking that I will not fix it.
If anyone is willing to try this custom ??? to see about what happens afterwards ...then I'll post this custom rom...but attention you'll brick your device and only solution is AdamsOutler tools ...
Click to expand...
Click to collapse
Lol. Great that your device is working
But, don't let others do it.
Btw you're saying your screen is fixed now?
Sent from my Nexus S using Tapatalk
shockem said:
Lol. Great that your device is working
But, don't let others do it.
Btw you're saying your screen is fixed now?
Sent from my Nexus S using Tapatalk
Click to expand...
Click to collapse
Hi!
Sorry but I do not understand your question....by the way - now my phone work great , you are right, everything work well without USB connections, and those spots dark yellow !!! ( at least white looks like dark yellow ).
I believe that the screen is not broken, because running Voodoo Screen Test , all colors are impeccable, no shadow , no colors mixed ....
If anyone knows a more complete test program, something to color or graphics...to see exactly what is defective ? ( or maybe a solution to remove this defect ?) - I will be grateful ! Thanks in advanced ....
Cheers,
surdu_petru
Hello a friend of mine gave me that phone to try to take it back from the death
The problem is that rubbish phone cant be recognised by the computer firts .... needed drivers are instaled but it refused to recognised it .... other phones are recognised with no problem at all including another lenovo devices also...the another problem is that when trying to install something from the sdcard a stock rom or custum via the recovery it returns error aborted .... and thats it
what to do with that piece of trash any suggestions :S
thanks in advance