Database Users

[Need Help] Soft Bricked my G2 , Fastboot Loop

I have a Korean LG G2 32GB D80220C_00, I was trying to install recovery yesterday but AutoRec bricked my phone. Now whenever I power on my phone I can only enter fastboot mode nothing else. I've tried finding some of the online solutions but none of them work. I think I may have flashed D802B partitions instead of D802C ones *facepalm* by following the tutorial here http://androidforums.com/threads/lg-g2-d802-international-hong-kong-version-32gb.877957/.
Can someone please share the partitions imgs for the 32GB LG G2 D80220C_00 . I would really appreciate it if someoone could point me to a working tutorial too ^^;
Update: My phone now turns on but is stuck at LG logo and the front LED is blinking. :/ I have no clue.
Update: Ok So I managed to get download mode working and my PC has detected the phone *Sigh of Relief* can someone please link me the kdz for a 32GB LG G2 D80220C_00 , It seems I can only find 16GB ones.

Flash 16GB version.

ceza1380 said:
Flash 16GB version.
Click to expand...
Click to collapse
Are you sure about that?
The KDZ doesn't work where can I find the TOT file instead?
BIN_LGD802AT-00-V10a whis that work?

Did you try to write your IMEI here http://www.lgkdz.com/ or look here http://storagecow.eu/index.php?dir=Xda/LG+G2/Stock/

ceza1380 said:
Did you try to write your IMEI here http://www.lgkdz.com/ or look here http://storagecow.eu/index.php?dir=Xda/LG+G2/Stock/
Click to expand...
Click to collapse
Yup I've entered my IMEI and got the kdz but after flashing my phone turns on and gets stuck at the LG logo and then the Led Flashed on and off. I don't know what to do.

wantei said:
Yup I've entered my IMEI and got the kdz but after flashing my phone turns on and gets stuck at the LG logo and then the Led Flashed on and off. I don't know what to do.
Click to expand...
Click to collapse
Try LG support tool http://lg-support-tool.en.lo4d.com/ someone tried it and it worked. It installs stock firmware.
---------- Post added at 03:54 PM ---------- Previous post was at 03:50 PM ----------
Check here http://forum.xda-developers.com/showthread.php?t=2685517

Check if your phone is original or from ebay - refurbished

I bought my phone from eBay India, apparently it's an imported edition from Korea. LG Support Tool doesn't work.
Does anyone have the dll for a 32gb version?

Can anyone please help me out here? My phone is still bricked.

Are you still in fastboot mode?

bender_007 said:
Are you still in fastboot mode?
Click to expand...
Click to collapse
Yup my phone always powers up into fastboot mode. I can still access Download mode though.

When flashing with lg flash tool 2014 ->
select cdma -> CSE FLASH
if it doesn't work then your phone might be some refurbished from ebay.
try
1. download the kdz
2. extract using kdz extractor (I might have the files here so I can maybe manage and upload a doubleclick ready solution for you)
3. flash aboot, boot, laf..
Then flash kdz

[Help Needed !!] HARD BRICKED Note 4 N910F

Hi Xda,
i m new here, sorry for my bad English.!
I have a note 4 n910f model and i installed "[5.0.1][N910F] DN ROM from E-Team v0.6" this rom on my Cell phone, it was all working fine and until yesterday my battery was like 13% and it suddenly turned off.
I plugged it to the charger and it was stuck at Samsung Logo, i thought its a boot loop so i Cleared Cache etc..
it didn't work, so i installed this rom again clearing all the Data and it was fine but today while i using Gmail and it suddenly turned off and then samsumg Logo came on the screen and then...:'(, nothing !!.
I plugged it to my laptop via usb cable and it was detected as "qhsusb_dload" so i installed Drivers and now it shows "qualcomm hs-usb qdloader 9008 ".
I think its Hard Bricked :crying:
Anyone with Same Device could help creating a Unbrick Disk image...

Turn download Mode on and Flash Stock Rom.

robotnikz said:
Turn download Mode on and Flash Stock Rom.
Click to expand...
Click to collapse
It doesn't, no Download no Recovery...
i think its Bricked

HusniBaig said:
It doesn't, no Download no Recovery...
i think its Bricked
Click to expand...
Click to collapse
I need the Debrick Image, can anyone create it for me...?
http://forum.xda-developers.com/showthread.php?t=2625628
Just Flash it and get me the debrick.img, please Zip and upload if Possible..?
here is tutorial too...?
http://forum.xda-developers.com/showthread.php?t=2625628

HusniBaig said:
I need the Debrick Image, can anyone create it for me...?
http://forum.xda-developers.com/showthread.php?t=2625628
Just Flash it and get me the debrick.img, please Zip and upload if Possible..?
here is tutorial too...?
http://forum.xda-developers.com/showthread.php?t=2625628
Click to expand...
Click to collapse
If you don't have recovery and download mode, why you want flash the unbrick image?
You need a repair center. No?

Download Kies and use the Emergency recover.

NickVXD said:
Download Kies and use the Emergency recover.
Click to expand...
Click to collapse
Bro I tried it is not being detected by Kies..:'(

Rajada said:
If you don't have recovery and download mode, why you want flash the unbrick image?
You need a repair center. No?
Click to expand...
Click to collapse
No Bro using a Debrick Image It will Boot from SD Card instead of its EMmc Memory...?
Got it..?

Anyone with N910F can get me system files dump,
http://forum.xda-developers.com/showpost.php?p=45725480&postcount=45

Here is a Similar POst for unbricking i just that Unbrick file, any volunteer..?
http://forum.xda-developers.com/galaxy-grand-2/general/how-to-unbrick-sm-g7102-t2824576
and link to file to generate Debrick image is here..
http://forum.xda-developers.com/showpost.php?p=45725480&postcount=45

HusniBaig said:
Here is a Similar POst for unbricking i just that Unbrick file, any volunteer..?
http://forum.xda-developers.com/galaxy-grand-2/general/how-to-unbrick-sm-g7102-t2824576
and link to file to generate Debrick image is here..
http://forum.xda-developers.com/showpost.php?p=45725480&postcount=45
Click to expand...
Click to collapse
HI, I am having the same problem with my note 4 N910F, Will this Debrick image generator work with Note 4?

HI, I tried and successfully created the Debrick image from another N910F (bought for the process), Transferred to sd card, But still no success, Tried 2 different cards, 2 Different roms. But no success. IDK what i'm doing wrong.

Shared a Guide here
http://forum.xda-developers.com/note-4/help/samsung-official-debrick-guide-note-4-t3363248

[email protected]% said:
HI, I tried and successfully created the Debrick image from another N910F (bought for the process), Transferred to sd card, But still no success, Tried 2 different cards, 2 Different roms. But no success. IDK what i'm doing wrong.
Click to expand...
Click to collapse
Hi, I've got the same problem, could you please send me the files so I could try on my sd card. Thanks

This Method Works Only If U Have A fine Working (Not Damaged EMMC)....

please i need the unbrick image for the note 4 sm-n910a for at&t. please if you have the note 4 ,do the file and send me to [email protected] .
the link of my bootloader : http://www.mediafire.com/file/vc49m...196496_REV00_user_low_ship_MULTI_CERT.tar.md5
the link of the method: http://www.mediafire.com/file/53n5r...comm_APQ8084+(includes+SM-N910F)++Rev+3_0.rar
the pit link: http://www.mediafire.com/file/o5wvr5ytx228pen/APQ8084_boot_recovery_v2.rar
password for this is daseul123
please help! scuse my english
thank

Need help please (sm-n910f)
don't have recovery and download mode no power on it shows a qualcomm hs-usb qdloader 9008 on device manager
can any one know to to debrick it please
thank in advance

[SOLVED] Galaxy J5 not booting and also can't boot into Download or Recovery mode

So, after I've updated my J500h to the newest firmware, my phone is stuck at the Samsung logo and the screen is also slowly turning green. So the problem is that I CAN'T boot into recovery or download mode. Odin recognizes the devices when it's hanging at the boot screen. ADB also recognizes the device after a few minutes:
Code:
E:/platform_tools>adb devices
List of devices attached:
18019a5b unauthorized
So, the problem is that I can't boot into download mode... Otherwise I would already flashed the stock firmware.
When connected to USB, the phone sometimes vibrates.
Can someone please help me? I've tried everything, but nothing helped
Does someone have any idea's to solve this problem? Looks like it's bricked.

gg. you just messed up the bootloader...
only way is jtag, nothing else...

H3XabyT3LV said:
gg. you just messed up the bootloader...
only way is jtag, nothing else...
Click to expand...
Click to collapse
Thanks for the answer. I will try jtag to restore the bootloader.

Fixed.

How

TheModzOn said:
Fixed.
Click to expand...
Click to collapse
tell us how?

First tried JTAG, didn't worked.
Searched on Google for a debrick.img file, found it, "flashed" it on my micro sdcard, booted from the sdcard and from that into Download Mode and flashed the stock Firmware

TheModzOn said:
First tried JTAG, didn't worked.
Searched on Google for a debrick.img file, found it, "flashed" it on my micro sdcard, booted from the sdcard and from that into Download Mode and flashed the stock Firmware
Click to expand...
Click to collapse
Please share it with me .. Please

Come on just share it already!

SPYMAN2000 said:
Come on just share it already!
Click to expand...
Click to collapse
frfwr963 said:
Please share it with me .. Please
Click to expand...
Click to collapse
Here it is (J500h 6.0.1 marshmallow): https://drive.google.com/file/d/0B-R9lQbH9_gCUFBKMWNoUmJyeUE/view?usp=sharing

My LG F800L doesn't turn ON after H918 kdz installation! HELPPPP

Hello.
First, sorry for my bad english..
I got the F800L model and I rooted the device following the guide of Dirty Santa.
One day I read in forum that someone was able to flash H918 rom to the F800L device.
So I tried to do same.. but with the mistake of not backing up my original rom.
When I tried to flash the H918 rom through TWRP, it installed well, but when it booted, it just remained hanged in LG logo.
I just left it over a day waiting if it pass the LG logo. But it didn't.
Then I searched for the fix and read the guide about restoring the bricked device through LGUP and kdz file.
So I entered in download mode and connected to PC.
Executed LGUP software and my device appeared in H91810i model instead of F800L. I downloaded the F800L kdz file and tried to restore with LGUP but it appeared error saying kdz invalid.
So I managed to download the H918 10i kdz file and tried again to restore.. and WOW! it completed the process.
But.. Now my device is in worse condition. It doesn't even turn on.
Tried to enter again in download mode but nothing happens.. neither enters in fastboot mode...
Pulled out the battery and reinserted, and tried to turn on but nothing happens..
Can anybody help me please???

I think you destroyed your phone
You should get it to repair service

lol, u just facing the same problem with me, i did exactly the same what u do, was looking around for solution, but nothing really helpful out there, the only way i found is the method with sd card, u get the debrick img file, burn it to a 32gb sd card with the right tool, put sd card to your phone and hope it will get to downloadmode or fastboot or whatever idknow cause i'm don't have the debrick.img file for F800L, looking for it right now, people say u can get that file from the phone (has same model) that still working, that all i know for now, if u found anyway to fix your phone please told me :highfive:

It has been repeated over and over and over "DO NOT FLASH ANYTHING THAT IS NOT MEANT FOR YOUR DEVICE" and also "FLASH AT YOUR OWN RISK". Both of them together makes it pretty clear that you shouldn't have flashed something that was meant only for the h918 into an f800l variant. Developers dont write this down as fancy words or for fun. They do it in order to let everybody know that if flashed, it could easily alter your system in such a way that it might never be fixed except by the company itself. By flashing something that wasnt meant for your device, you are trying to override the system with an image. And if the developer never made the source compatible with yours, then software and hardware will be contradicting each other. The motherboards of the phones comes for its specific variants and only developers can alter an image of a system to make it somewhat compatible with the variant.
Now, lets hope you get an answer to how to fix it because LG wont be fixing it for you since you voided your warranty by a) the simple fact of unlocking the bootloader (which is pretty easy to identify since it shows the warning sign when you turn the phone on), and b) you rooted the device. And LG wont work with neither of those. Unless.... and this is a maybe because i dont know if they would agree too (if you pay the sum they request to fix it, which i assure you it will be more that $100+ maybe even significantly more). Then they fix it for you.
I personally made a backup in a separated MIcro SD card i have outside the phone. So that if i have problems with my system, then i just insert that micro sd card and restore the backup.
Good luck!

If the phones screen is blank when you try to turn it on you bricked. Only fix is a replacement. There is NO debrick.img

oh my god, if u stop at the step KDZ tool found your device that H918, I can help you. Just boot to fastboot mode and fastboot the file name bootbackup.img and KDZ tool will found your device is F800L then KDZ normally. Sorry for my bad English.

gamza88 said:
Hello.
First, sorry for my bad english..
I got the F800L model and I rooted the device following the guide of Dirty Santa.
One day I read in forum that someone was able to flash H918 rom to the F800L device.
So I tried to do same.. but with the mistake of not backing up my original rom.
When I tried to flash the H918 rom through TWRP, it installed well, but when it booted, it just remained hanged in LG logo.
I just left it over a day waiting if it pass the LG logo. But it didn't.
Then I searched for the fix and read the guide about restoring the bricked device through LGUP and kdz file.
So I entered in download mode and connected to PC.
Executed LGUP software and my device appeared in H91810i model instead of F800L. I downloaded the F800L kdz file and tried to restore with LGUP but it appeared error saying kdz invalid.
So I managed to download the H918 10i kdz file and tried again to restore.. and WOW! it completed the process.
But.. Now my device is in worse condition. It doesn't even turn on.
Tried to enter again in download mode but nothing happens.. neither enters in fastboot mode...
Pulled out the battery and reinserted, and tried to turn on but nothing happens..
Can anybody help me please???
Click to expand...
Click to collapse
hi did you find any way to help ? i m in similar position

me2151 said:
If the phones screen is blank when you try to turn it on you bricked. Only fix is a replacement. There is NO debrick.img
Click to expand...
Click to collapse
Hello My Friend,
I have F800s and I rooted by your methos and did exactly the same thing as OP installed H918 rom through twrp. Now I can only go in download mode and LGUP reads my phone as H918 what should I do please help .

Huawei Nova 2I bricked Please help.

So I've recently unlocked my bootloader with my request code from emui.com and decided to root my phone so after flashing twrp to my phone it resets my phone and yea that's usual. During the process of rooting my phone , after flashing it is, my phone got into a bootloop after like an eight hour of searching I still can't find a fix for it.
I've followed all these steps cause mainly I dont have a nandroid backup, i followed all the steps https://forum.xda-developers.com/mate-10/huawei-mate-10-lite--roms-kernels-recoveries--other-development/oeminfo-collection-t3762385 my boot img has changed to Honor which at that time state I was very happy I thought all of these has come to an end, but ended up still booting my into erecovery,
I really need help to fix my problem, urgent please.
Thank you xda.

Bro, here is the solution u are looking for
forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279

ctlovecyc said:
Bro, here is the solution u are looking for
forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
Click to expand...
Click to collapse
Thank you very much it works but after flashing the firmware my camera isn't working that well so I flashed mate 10 lite's firmware and it work perfectly fine! Thank you!

Testpoint
When i connect testpoint to GND. in device manager, Windows display label : USB SER. It does not seem to have the driver? Please, give me Hisilicon EDL mode driver if you have it.

Help when i flashed a boot.img and system.img i bricked my phone.
what happens is when my phone boots up it goes directly to eRecovery

Sheeee said:
Help when i flashed a boot.img and system.img i bricked my phone.
what happens is when my phone boots up it goes directly to eRecovery
Click to expand...
Click to collapse
Yes, same with me.. any solutions? As I tried to flash TWRP thru fastboot, but still erecovery goues up.

Hello there good sir. May I ask how did you change the Boot.img of your Huawei Nova 2i to Honor? May you give details or do you have the link? Many thanks.