Hello, and sorry for my English.
I flashed a TWRP on my Huawei P10 lite, and I want to know if I still can install official upgrades without any issues.
Thanks.
elchino!!! said:
Hello, and sorry for my English.
I flashed a TWRP on my Huawei P10 lite, and I want to know if I still can install official upgrades without any issues.
Thanks.
Click to expand...
Click to collapse
You can take a look at this:https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
mrleja said:
You can take a look at this:https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
Click to expand...
Click to collapse
Thanks, but I mean install the upgrades via Settings > System Update, that would brick my phone? Thanks again
I know that if you install twrp in recovery1 then you will not get an update.
If you have a root phone, you will not even get it.
If you install twrp in recovery2 and do not root, you will receive the update and the update will overwrite the twrp.
pity02 said:
I know that if you install twrp in recovery1 then you will not get an update.
If you have a root phone, you will not even get it.
If you install twrp in recovery2 and do not root, you will receive the update and the update will overwrite the twrp.
Click to expand...
Click to collapse
Hello. I downloaded the upgrade and when I tried to install it the TWRP sent an error message (I don't remember which one). Yesterday I was able to install the stock recovery, but I don't know what I did wrong that I had to drain the battery out just to get out from the logo screen before the boot animation, and now I can enter into eRecovery.
Related
I'm using clean slate rom.. but i got OTA update... I have attached the screenshot... can i install it?.. will it brick? or do I have to wait for new build cleanslate..
no don't update i did mistake updated 2 days ago now surfing with WiFi not connected most of time hide all connection some time connect bad update
Update :
After Reset Factory Setting my Wifi Now Ok So if anyone face this problem Make Factory Reset After OTA Update
Backup Before Doing This Ur User Data
thanks
It is a version for the firmware 1.89
you will work better if you have s-off.
so every room. s call-off.
hmmmm okay guys.. thanks for the info... when we will be getting atleast android 5.1!!
Doesn't look like we're going to get 5.1, the update schedule has us going straight to Marshmallow in early 2016
I am on 1.88.707.1 and have rooted my M9+ and have TWRP 2.8.7.0 recovery installed with S-ON (I installed Sunshine and it passed the tests and S-off can be done but I haven't.)
I also got this update notification, and downloaded it. But now, after the first reboot, it boots into TWRP and I have no clue how to apply this update.
Is there a way I can flash (only) stock recovery? How do I go about it? Can someone please help?
IndianHacker said:
I am on 1.88.707.1 and have rooted my M9+ and have TWRP 2.8.7.0 recovery installed with S-ON (I installed Sunshine and it passed the tests and S-off can be done but I haven't.)
I also got this update notification, and downloaded it. But now, after the first reboot, it boots into TWRP and I have no clue how to apply this update.
Is there a way I can flash (only) stock recovery? How do I go about it? Can someone please help?
Click to expand...
Click to collapse
you cant apply this update since you are rooted
karlanal said:
you cant apply this update since you are rooted
Click to expand...
Click to collapse
You can't do an OTA update with a custom recovery. Root is irrelevant.
str8upx said:
You can't do an OTA update with a custom recovery. Root is irrelevant.
Click to expand...
Click to collapse
So if i root my phone without the custom recovery im stil able to get OTA-s
I download the packacke via OTA and restart device. Then it boots to TWRP. I have to reboot device again and it goes back 6.0.1 with failed update notification. My deivice is unroot and still lock bootloader. Is there anyone having the same issue with me? And possible way to fix?
Thanks
Thalias said:
I download the packacke via OTA and restart device. Then it boots to TWRP. I have to reboot device again and it goes back 6.0.1 with failed update notification. My deivice is unroot and still lock bootloader. Is there anyone having the same issue with me? And possible way to fix?
Thanks
Click to expand...
Click to collapse
You have to restore stock B29 recovery. You can't accept an OTA with TWRP.
bkores said:
You have to restore stock B29 recovery. You can't accept an OTA with TWRP.
Click to expand...
Click to collapse
Thanks. I am downloading again. Hope it works this time.
bkores said:
You have to restore stock B29 recovery. You can't accept an OTA with TWRP.
Click to expand...
Click to collapse
It still fails. After restarting device it boots into installing screen with miFavor logo instead of TWRP. The processing bar runs to about 24% then stops to reboot. I notice that the log at bottom screen say mismatch. And I got message system update package does not match the phone.
Thalias said:
It still fails. After restarting device it boots into installing screen with miFavor logo instead of TWRP. The processing bar runs to about 24% then stops to reboot. I notice that the log at bottom screen say mismatch. And I got message system update package does not match the phone.
Click to expand...
Click to collapse
You modified /system . You should probably flash official b29 firmware from ZTE and then update to nougat
Teet1 said:
You modified /system . You should probably flash official b29 firmware from ZTE and then update to nougat
Click to expand...
Click to collapse
I got b29 from zte website. Can I install it with stock recovery?
Thalias said:
Is there a link to download it?
Click to expand...
Click to collapse
https://www.zteusa.com/axon-7
Go under Support<Software Updates.
bkores said:
https://www.zteusa.com/axon-7
Go under Support<Software Updates.
Click to expand...
Click to collapse
Can I install it with stock recovery?
Thalias said:
Can I install it with stock recovery?
Click to expand...
Click to collapse
You have to install it in stock recovery. Put it on your FAT32 sdcard and then in stock recovery select "Apply update from sdcard".
bkores said:
You have to install it in stock recovery. Put it on your FAT32 sdcard and then in stock recovery select "Apply update from sdcard".
Click to expand...
Click to collapse
I got following message at bottom left of screen
Supported API: 3
Sorry, you can't sd upgrade
I think you have to enable OEM unlock in developer options, first. Then, you can install B29 via SDCard.
MiMtnBiker said:
I think you have to enable OEM unlock in developer options, first. Then, you can install B29 via SDCard.
Click to expand...
Click to collapse
Thanks. I forgot to unzip the file and put it in the root of sd card and I have done what you said too. It is running installation now.
I'm failing now? I went from ZAD v.3 back to stock B29 (I have an unlocked bootloader). I do have the MiFavor recovery (not TWRP)
I got the notification there was an upgrade, it took 6 hours to download... but the update "failed". I tried applying the update via SD card, but I get about 32% in and says "Update failed"......It also lists "Status 8" and "system partition has unexpected contents".
Sounds like y'all are having a hell of a time between the slow OTA speeds and then getting it to actually flash.
So I think I'll hold off for now. Hopefully we can get some TWRP-flashable zips soon enough... I think DrakenFX is already busy with all that
You guys are making this way too complicated.
The full B29 firmware will flash just fine with twrp.
Only OTA *updates* require the stock recovery. The difference is the update patches existing files while the full firmware contains full partition images.
Be aware if you download the full b29 firmware from zte, it will also replace your recovery and bootloader. You won't be able to flash recovery from the bootloader/fastboot screen then. Also, it wipes all your data.
DrakenFX put out a modified version of the full firmware file which doesn't modify the bootloader. I believe it also leaves the recovery intact.
After flashing official A2017U B29 firmware from ZTE the signal network service is lost. I ignore this and continue to upgrade to Nougat successfully and I get lost signal. I notice that Dual Sim Setting is working. Does official firmware overwrite original chinese baseband/bootstack? Can someone please upload chinese baseband/bootstack A2017 please?
gpz1100 said:
You guys are making this way too complicated.
The full B29 firmware will flash just fine with twrp.
Only OTA *updates* require the stock recovery. The difference is the update patches existing files while the full firmware contains full partition images.
Be aware if you download the full b29 firmware from zte, it will also replace your recovery and bootloader. You won't be able to flash recovery from the bootloader/fastboot screen then. Also, it wipes all your data.
DrakenFX put out a modified version of the full firmware file which doesn't modify the bootloader. I believe it also leaves the recovery intact.
Click to expand...
Click to collapse
No more complicated than it's turned out to be....
I followed DrakenFX's guide to B29 stock... The Nougat OTA downloaded, in 6 hours, but failed. So, I tried the SD card method, and it also failed at 32%.
Not sure what else I can do? Just wait for DrakenFX to make ZAD v.4 is my plan for now since I already wasted about 11 hours trying to upgrade today, and another 3 restoring back 6.0.1 and all my apps.
tele_jas said:
No more complicated than it's turned out to be....
I followed DrakenFX's guide to B29 stock... The Nougat OTA downloaded, in 6 hours, but failed. So, I tried the SD card method, and it also failed at 32%.
Not sure what else I can do? Just wait for DrakenFX to make ZAD v.4 is my plan for now since I already wasted about 11 hours trying to upgrade today, and another 3 restoring back 6.0.1 and all my apps.
Click to expand...
Click to collapse
No problem upgrading using the OTA on an sdcard here. Flashed the draken stock_system zip, then fastboot flashed the B29 stock recovery. Reboot to recovery (which is now stock) and update from sd card. If you've messed with other partitions, you may need to flash more B29 .img's.
Thalias said:
After flashing official A2017U B29 firmware from ZTE the signal network service is lost. I ignore this and continue to upgrade to Nougat successfully and I get lost signal. I notice that Dual Sim Setting is working. Does official firmware overwrite original chinese baseband/bootstack? Can someone please upload chinese baseband/bootstack A2017 please?
Click to expand...
Click to collapse
hey why you flashed us version firmware on chinise version?
i have aslo chinise version of the phone with b09G firmware im afraid loose signal too
yosef019 said:
hey why you flashed us version firmware on chinise version?
i have aslo chinise version of the phone with b09G firmware im afraid loose signal too
Click to expand...
Click to collapse
I don't know Chinese so I prefer Eng community with support and US region always get latest update first.
I tried rooting my phone and decided to downgrade my os from 7.0.1 to 6.0.1 I downloaded and flashed a modded version of 6.0.1 and now my device is not rooted and i can't update my phone to nougat. It keeps showing the not recognizing package error what do i do?
I haven't modded mine so just guessing but if you have twrp I expect it won't update.
Most phones need stock recovery to take an update. Not modding mine for this reason. I think Android 8 will come for A7.
RobboW said:
I haven't modded mine so just guessing but if you have twrp I expect it won't update.
Most phones need stock recovery to take an update. Not modding mine for this reason. I think Android 8 will come for A7.
Click to expand...
Click to collapse
is there a way for me to remove twrp and get stock recovery?
Haven't looked into modding the Axon 7, mine stays standard. Have a look around the forum here, do a search. Maybe someone who knows will join in to help you.
PESRMS said:
is there a way for me to remove twrp and get stock recovery?
Click to expand...
Click to collapse
RobboW said:
Haven't looked into modding the Axon 7, mine stays standard. Have a look around the forum here, do a search. Maybe someone who knows will join in to help you.
Click to expand...
Click to collapse
Yes there are many. You can:
-use a backup of the recovery, via axon7tool ('axon7tool -r recovery' backs up your recovery)
-flash a full stock system image through MiFlash
-flash a stock recovery zip through twrp, then reboot (there are recovery zips for the G on the download center, although there may be zips made for the U and Chinese)
Hi, everyone!
Today i recived a system update, I press quick update but then twrp starts and when I reboot, a notification says "system update failed" (or somthing like this), how can I update?
topongo said:
Hi, everyone!
Today i recived a system update, I press quick update but then twrp starts and when I reboot, a notification says "system update failed" (or somthing like this), how can I update?
Click to expand...
Click to collapse
otas doesn't work with custom recovery installed, yes or yes you need sotck recovery, maybe you try with firmware finder.
Here is the stock recovery. Flash this, then U will be able to update. After that U can re-flash TWRP
https://drive.google.com/open?id=0B38rwPwR6EtKdDdDQTNrbW81Mk0
thank you very much, I will do this tomorrow
topongo said:
thank you very much, I will do this tomorrow
Click to expand...
Click to collapse
Better flash TWRP to erecovery, always)
topongo said:
thank you very much, I will do this tomorrow
Click to expand...
Click to collapse
Did it work for you?
Belgas14 said:
Did it work for you?
Click to expand...
Click to collapse
sorry, I was inactive for a while. Yes, it worked, I flashed with success and updated but when I tried to reflash twrp the terminal say "flash failed" "permission denied" or something. I tried to relock and unlock bootloader but nothing...
Hi everyone, recently I downloaded the latest update from huawei system updater and then I wanted to flash it with flashfire but when it restarts it says "check_write_data_to_partition,write data error" and "update_huawei_pkg_from_ota_zip: update package from zip failed" then it reboot normaly without system changes, what can I do?
edit:
in the head of the log it says olso:
"mountencrypt: failed to mount /data: success"
It's pretty ambiguous...
topongo said:
Hi everyone, recently I downloaded the latest update from huawei system updater and then I wanted to flash it with flashfire but when it restarts it says "check_write_data_to_partition,write data error" and "update_huawei_pkg_from_ota_zip: update package from zip failed" then it reboot normaly without system changes, what can I do?
edit:
in the head of the log it says olso:
"mountencrypt: failed to mount /data: success"
It's pretty ambiguous...
Click to expand...
Click to collapse
Unlocked bootloader, custom recovery?
nemanjsb said:
Unlocked bootloader, custom recovery?
Click to expand...
Click to collapse
yeah TWRP
topongo said:
yeah TWRP
Click to expand...
Click to collapse
With twrp u can't install update u need stock recovery. Try to boot in erecovery and press download last recovery and then reboot in recovery.
nemanjsb said:
With twrp u can't install update u need stock recovery. Try to boot in erecovery and press download last recovery and then reboot in recovery.
Click to expand...
Click to collapse
I'm trying to install update through flashfire and not twrp or system recovery
Armin.K said:
Here is the stock recovery. Flash this, then U will be able to update. After that U can re-flash TWRP
https://drive.google.com/open?id=0B38rwPwR6EtKdDdDQTNrbW81Mk0
Click to expand...
Click to collapse
Can we use twrp to flash the stock recovery or must your pc with ADB ?
nainaabd said:
Can we use twrp to flash the stock recovery or must your pc with ADB ?
Click to expand...
Click to collapse
I used my pc with "fastboot".
I don't think is possible to flash stock recovery from a custom recovery
topongo said:
I used my pc with "fastboot".
I don't think is possible to flash stock recovery from a custom recovery
Click to expand...
Click to collapse
Thank you .
I have a P9 lite VNS-L31C432B412 dual sim. It is rooted with TWRP. Super su installed.
When I click on 'update', my huawei p9 lite offers me to upgrade to version B414. I currently have version B412.
I accept the 'quick update' he offers me.
The mobile reboot on TWRP and there a red line with: error 7.
I would like to know where are the TWRP error logs stored?
And I would also like to know what to do?
Thank you
toto6976 said:
I have a P9 lite VNS-L31C432B412 dual sim. It is rooted with TWRP. Super su installed.
When I click on 'update', my huawei p9 lite offers me to upgrade to version B414. I currently have version B412.
I accept the 'quick update' he offers me.
The mobile reboot on TWRP and there a red line with: error 7.
I would like to know where are the TWRP error logs stored?
And I would also like to know what to do?
Thank you
Click to expand...
Click to collapse
You have to uninstall SU first. Then flash through TWRP the stock recovery. Reboot and then install the new ROM
mermigas said:
You have to uninstall SU first. Then flash through TWRP the stock recovery. Reboot and then install the new ROM
Click to expand...
Click to collapse
Hi,
Where do i find the 'stock recovery' ?
toto6976 said:
Hi,
Where do i find the 'stock recovery' ?
Click to expand...
Click to collapse
Look here
https://forum.xda-developers.com/huawei-p9lite/help/stock-recovery-nougat-t3516182
update ok. on the other hand I have more TWRP! I installed the recovery stock via 'fastboot'.
How can I reinstall TWRP? the problem of updates is it happening ??
mermigas said:
Look here
https://forum.xda-developers.com/huawei-p9lite/help/stock-recovery-nougat-t3516182
Click to expand...
Click to collapse
update ok. on the other hand I have more TWRP! I installed the recovery stock via 'fastboot'.
How can I reinstall TWRP? the problem of updates is it happening ??