Related
If you've broken the screen on your week-old G3 (new rescue pup thought my TPU-covered G3 was a chew toy) and wondered whether to (a) try to fix it yourself with parts off the Internet, (b) take it to a local shop, or (c) ship it to LG for a "warranty" repair, here's my experience with the process.
There's nothing out there showing how to fix the G3 screen other than one shop's teardown that claims it's easy to fix G3 hardware issues (nothing about the screen though). Parts are posted all over the Internet and eBay, but they're all generic-looking stuff and who knows if the digitizer glass is really GG3. Prices of parts ranging $140 to $200, and I need both the digitizer glass and the LCD, maybe a front frame because it has a couple of small dings from the dog's teeth. Already dreading the price quotes from shops, since the QHD LCD must be more expensive than anything out there, and it's fairly new. Figuring that it will cost hundreds of dollars no matter who I have repair it, since that's what some shops quote for newer smartphones and tablets like the Galaxy S5 and Note 3, I decided to ship my G3 to LG so I wouldn't void what warranty I had left.
LG received the phone 7/28/14. The next day, they email me a diagnosis and repair quote since it's not covered by warranty (duh!).
It will cost $146 to repair, $153 to fully refurbish. Pretty much justifies not getting the insurance policy. YMMV, from what I read in the G2 forum about LG factory service (the parts/repair prices may vary depending on availability and demand).
So if you drop and break the screen of your precious new G3, then don't worry about how much it will cost to repair this relatively new device, if you are not too concerned about turnaround time.
jklew said:
If you've broken the screen on your week-old G3 (new rescue pup thought my TPU-covered G3 was a chew toy) and wondered whether to (a) try to fix it yourself with parts off the Internet, (b) take it to a local shop, or (c) ship it to LG for a "warranty" repair, here's my experience with the process.
There's nothing out there showing how to fix the G3 screen other than one shop's teardown that claims it's easy to fix G3 hardware issues (nothing about the screen though). Parts are posted all over the Internet and eBay, but they're all generic-looking stuff and who knows if the digitizer glass is really GG3. Prices of parts ranging $140 to $200, and I need both the digitizer glass and the LCD, maybe a front frame because it has a couple of small dings from the dog's teeth. Already dreading the price quotes from shops, since the QHD LCD must be more expensive than anything out there, and it's fairly new. Figuring that it will cost hundreds of dollars no matter who I have repair it, since that's what some shops quote for newer smartphones and tablets like the Galaxy S5 and Note 3, I decided to ship my G3 to LG so I wouldn't void what warranty I had left.
LG received the phone 7/28/14. The next day, they email me a diagnosis and repair quote since it's not covered by warranty (duh!).
It will cost $146 to repair, $153 to fully refurbish. Pretty much justifies not getting the insurance policy. YMMV, from what I read in the G2 forum about LG factory service (the parts/repair prices may vary depending on availability and demand).
So if you drop and break the screen of your precious new G3, then don't worry about how much it will cost to repair this relatively new device, if you are not too concerned about turnaround time.
Click to expand...
Click to collapse
The issue is that your phone loses approximately $5/day in value everyday. So even bigger loss each day its out of your hands ... So insurance isn't that bad! I really think with the life cycles of cell phones the G3 will be on craigslist for $250 in a few months !
Hey All,
My two bits...I dropped my G3 4 days in and destroyed the screen. As you can imagine I was pretty upset and concerned that I had just wasted $800 and had no clue what to do. I ended up finding a retailer online that sold the Oem screen, digitizer and casing for what ended up to be just over $200. With a little help from the disassembly video I tried to do myself. I am happy to report that it was unbelievably easy to complete the repair and I have a 100% working phone again. As the video shows you remove 13 screws, remove the two pieces of the backing and pull out the mother board. The only thing you need to do then it gently remove the vibrator, camera..front and rear, speaker, head phone jack and little daughter board. These are all stuck with two sided tape and just require a little light prying to remove. The replacement unit even had the two sided tape pre installed and you only had to remove the little plastic tabs that covered the sticky tape and then place each part in its corresponding place. I reassembled the phone and voila...a brand new working G3. The nice thing is the replacement was the case as well so the dings and dents from the drop on the case were all gone as well. So if you do the same don't be afraid to save the labour and do it yourself
imapfsr said:
Hey All,
My two bits...I dropped my G3 4 days in and destroyed the screen. As you can imagine I was pretty upset and concerned that I had just wasted $800 and had no clue what to do. I ended up finding a retailer online that sold the Oem screen, digitizer and casing for what ended up to be just over $200. With a little help from the disassembly video I tried to do myself. I am happy to report that it was unbelievably easy to complete the repair and I have a 100% working phone again. As the video shows you remove 13 screws, remove the two pieces of the backing and pull out the mother board. The only thing you need to do then it gently remove the vibrator, camera..front and rear, speaker, head phone jack and little daughter board. These are all stuck with two sided tape and just require a little light prying to remove. The replacement unit even had the two sided tape pre installed and you only had to remove the little plastic tabs that covered the sticky tape and then place each part in its corresponding place. I reassembled the phone and voila...a brand new working G3. The nice thing is the replacement was the case as well so the dings and dents from the drop on the case were all gone as well. So if you do the same don't be afraid to save the labour and do it yourself
Click to expand...
Click to collapse
Why on earth did you pay 800 for the g3 when they were only 599 on release day?
thegrants82 said:
Why on earth did you pay 800 for the g3 when they were only 599 on release day?
Click to expand...
Click to collapse
I purchased it from a reseller before it was released here and I also live in Canada where everything just costs a little more ?
thegrants82 said:
Why on earth did you pay 800 for the g3 when they were only 599 on release day?
Click to expand...
Click to collapse
Some things cost more in other countrys. And I also wanted a really good reseller in case anything happens. With quick and good support. without need to send it, wait two weeks etcetc.
And ye. Payed 800$ here in Sweden.
GG3
Reading this made me look up just what's so great about Corning's various hardened glass, and I've realised it's much more to do with being scratch-resistant than actually shatter proof. Funny how easily marketing will leave you stuck with the wrong (inflated) idea ... and, sure, scratch resistance is nice, but then that's why you buy a nice cheap case for your phone rather than put it in your pocket together with your keys.
armadafan271 said:
The issue is that your phone loses approximately $5/day in value everyday. So even bigger loss each day its out of your hands ... So insurance isn't that bad! I really think with the life cycles of cell phones the G3 will be on craigslist for $250 in a few months !
Click to expand...
Click to collapse
It won't be THAT cheap for a while. G2's were still going for like $400 up until the g3 launched.
jklew said:
If you've broken the screen on your week-old G3 (new rescue pup thought my TPU-covered G3 was a chew toy) and wondered whether to (a) try to fix it yourself with parts off the Internet, (b) take it to a local shop, or (c) ship it to LG for a "warranty" repair, here's my experience with the process.
There's nothing out there showing how to fix the G3 screen other than one shop's teardown that claims it's easy to fix G3 hardware issues (nothing about the screen though). Parts are posted all over the Internet and eBay, but they're all generic-looking stuff and who knows if the digitizer glass is really GG3. Prices of parts ranging $140 to $200, and I need both the digitizer glass and the LCD, maybe a front frame because it has a couple of small dings from the dog's teeth. Already dreading the price quotes from shops, since the QHD LCD must be more expensive than anything out there, and it's fairly new. Figuring that it will cost hundreds of dollars no matter who I have repair it, since that's what some shops quote for newer smartphones and tablets like the Galaxy S5 and Note 3, I decided to ship my G3 to LG so I wouldn't void what warranty I had left.
LG received the phone 7/28/14. The next day, they email me a diagnosis and repair quote since it's not covered by warranty (duh!).
It will cost $146 to repair, $153 to fully refurbish. Pretty much justifies not getting the insurance policy. YMMV, from what I read in the G2 forum about LG factory service (the parts/repair prices may vary depending on availability and demand).
So if you drop and break the screen of your precious new G3, then don't worry about how much it will cost to repair this relatively new device, if you are not too concerned about turnaround time.
Click to expand...
Click to collapse
How long did it take lg to send it back to you?
armadafan271 said:
The issue is that your phone loses approximately $5/day in value everyday. So even bigger loss each day its out of your hands ... So insurance isn't that bad! I really think with the life cycles of cell phones the G3 will be on craigslist for $250 in a few months !
Click to expand...
Click to collapse
Loses $5 a day in value a day lol??
That would mean my phone would be worth $0 in a month from now...
The value goes down more like .50 cents a day at most...
Amb669 said:
Loses $5 a day in value a day lol??
That would mean my phone would be worth $0 in a month from now...
The value goes down more like .50 cents a day at most...
Click to expand...
Click to collapse
In a couple months you will have to pay someone to take it from you.
Sent from my LG-D851 using XDA Free mobile app
LG G3 repair
The G3 is ten times easier to repair than the G2. The back comes right off like any other normal android phone. Remove the screws that you see holding the back on the midframe/bezel. remove the top half using a safety pry tool and do the same with the bottom half. Disconnect the two ribbon connections at bottom near charging port. Take out battery if you haven't already. Heat the back using heat gun or hairdryer. Heat front of assembly using the same heat gun or hairdryer. There are no other ribbons or connections to worry about at this point. Using iSesamo bar or other prying tool remove the broken assembly. (Note: There is no adhesive holding the LCD to the midframe so the removal is very easy.) Just pry around the top and sides of the phone and pull up at top then slide old LCD assembly out. Be sure to use a good 3M adeesive when putting in the new assembly. Connect the ribbons back to the board, close phone, power the phone on and enjoy. The whole process should take no more than half an hour if you ever done any previous repairs to another phone. Hit thanks if this helps
https://www.youtube.com/watch?v=I-LUBTADX2U
Thanks a ton for this thread. I may be able to repair my G3 now. It has been unusable for 3 months now cause I could not find anyone that would repair it.
I need to replace display with bazel
imapfsr said:
Hey All,
My two bits...I dropped my G3 4 days in and destroyed the screen. As you can imagine I was pretty upset and concerned that I had just wasted $800 and had no clue what to do. I ended up finding a retailer online that sold the Oem screen, digitizer and casing for what ended up to be just over $200. With a little help from the disassembly video I tried to do myself. I am happy to report that it was unbelievably easy to complete the repair and I have a 100% working phone again. As the video shows you remove 13 screws, remove the two pieces of the backing and pull out the mother board. The only thing you need to do then it gently remove the vibrator, camera..front and rear, speaker, head phone jack and little daughter board. These are all stuck with two sided tape and just require a little light prying to remove. The replacement unit even had the two sided tape pre installed and you only had to remove the little plastic tabs that covered the sticky tape and then place each part in its corresponding place. I reassembled the phone and voila...a brand new working G3. The nice thing is the replacement was the case as well so the dings and dents from the drop on the case were all gone as well. So if you do the same don't be afraid to save the labour and do it yourself
Click to expand...
Click to collapse
Hey I am trying to do the same thing you did.
My question is how hard was removing the daughter board? What tool and technique you used?
I can't find a video or tutorial where they remove the little daughter board and wanted to know how hard it is to remove before ordering parts.
It really was very easy, much easier than I expected. The daughter board was also pretty easy and I think I ended up using my finger and a guitar pick but anything small will suffice. The two sides sticky is really not that strong so just have patience when pulling those pieces out as they do come off pretty easy, Just use caution, you will be fine.
I need help to apply my pre-cut adhesive to my LG G3 D850
I bought an lg g3 d850 digitizer+lcd combo and a precut adhesive sticker for the model. Howwever, I am not sure how to apply the adhesive because there is less than 1 mm of room on the sides. What is the best approach for me to apply the pre -cut adhesive. Here is the link to the adhesive that I am talking about.
Will LG still repair your LG G3 even if you tried repairing it yourself? I tried ordering a new screen and putting it in myself but that didn't work so the lg g3 has been opened which voids warranty.
My wife's G3 developed this weird mark on the screen (always visible when the screen is on), and she claims to have never done anything like drop it in the tub or toilet... but it appears to be water damage to me. (See pic attached)
I put it in rice for a few weeks, and it's not going away... so I'm ready to try to fix it. Has anyone seen anything like this? Since the glass is still in good shape (it wasn't dropped or cracked)... what do I need to order to fix it?
I had the same concerns as the OP... buying a replacement LCD panel from Amazon or eBay, I wasn't sure if I'd get a full-res OEM replacement or a cheap knock-off. Can anyone point me to a reliable reseller (preferably on Amazon for several reasons) that would have the right parts to fix her phone up?
Thanks
The crack you see is in a tempered glass screen protector... not the screen itself.
Hai guys,
I have broken my glass on g3, display works fine but shuttered portion of screen is not fully functional, please can someone point me to reliable reseller, preferable on eBay, cos don't want to trash my money on knock-offs, I wanna real deal 100% OEM original display. So I need you guys from personal experience to point me in the right direction. Thx in advance!
Let a buddy hold my phone and my luck kicked in, he dropped it. It was a very light fall and only have it 2 cracks on the edge and one hairline Crack across the screen. Phone works fine and I can see and touch everything. I've heard it's pricey to replace the screen on this thing because the screen assembly is one piece? Meaning I can't just buy the glass? Any advice or helpful links to reputable sites would be greatly appreciated. I've always just bought a new phone when I Crack my screen but this phone cost too much to just sell off for cheap. Thanks in advance
I need some help guys. No repair shop will touch the phone without replacing the glass and lcd and charging $399. I've seen multiple people claim to have changed the glass only and looking online that part isn't expensive at all. If anyone can confirm their success I may make the attempt to do it my self. I've already spent $400 on this phone so I'd like to spend as little as possible to fix it
Called every shop I could and all said it would he anywhere from 350-400 for the whole lcd assembly. I asked every store (in my state and neighboring state) if they could just replace the glass and all said no. So my question is if anyone reading this has a link to a reputable site to get the lcd assembly, under $270 if possible. And lastly, if I buy the necessary tools and watch videos, what's the chances of messing up the phone replacing the WHOLE lcd assembly, if I've never used a heat gun to remove glass? I've replaced the lcd assembly on my lg g2 but the back being plastic eliminated the need for any heat. I'm lost and don't want to spend $400 more.
No way to replace only the glass without risking damage to the AMOLED screen or digitizer. The screen is glued together, and a slight force will cause the screen to shatter. If you want to take that risk, you can go ahead and look up a tutorial, but it seems to be very difficult to only replace the glass and not the entire assembly(Thats why repair shops don't do them as the chance of failure is too high)
Eric1084 said:
No way to replace only the glass without risking damage to the AMOLED screen or digitizer. The screen is glued together, and a slight force will cause the screen to shatter. If you want to take that risk, you can go ahead and look up a tutorial, but it seems to be very difficult to only replace the glass and not the entire assembly(Thats why repair shops don't do them as the chance of failure is too high)
Click to expand...
Click to collapse
What's the cheapest option? Buy the whole lcd assembly and change it my self? Or pay samsung and wait? I bought this second hand from a guy who come to find out still owed payments so no insurance route is possible. I'd have to send in my phone and wait
brd912 said:
What's the cheapest option? Buy the whole lcd assembly and change it my self? Or pay samsung and wait? I bought this second hand from a guy who come to find out still owed payments so no insurance route is possible. I'd have to send in my phone and wait
Click to expand...
Click to collapse
Well, cheapest option is to do as you said, replace the glass. But if you fail during the process, your only bet would be to replace the whole assembly, and even if you had warranty, that would be completely voided. So if you are going to replace the assembly anyway, might be worth a try to separate the glass, and replace only the glass. And if it fails, you can just replace the entire assembly. But if you plans to send it to Samsung anyway, I would suggest you to do that without any diy modification to the device. If you are planning to buy the assembly, make sure you get a genuine OEM screen. I saw a lot of fake China lcd assembly, and S7 have amoled at much better resolution.
I had a S6, and display while glueing? itself off, cracked the whole amoled screen completely. And Edge is even more dangerous. So all You can do is to pretty much either replace it Yourself (not too difficult if You ask me) but You will eventually make it not waterproof anymore. And You might break something while fixing it(like the paint or the back panel, although paint 90%) and then You will have to pay even more. Or just take it to repair service, pay.. I don't know. 50-100$ more and get a professional repair without any risk. And if it's going to be made by Samsung, You still might have waterproof phone after that. So I guess You should take it to a repair service. 50-100$ more, but trust me. You will most likely mess up the pain and ruin Your phone visually. As well as You will need to buy tiny screw drivers, some flat plastic tool, and adhesive tape. And sometimes using a hair dryer to open the back, will destroy some components inside. So be careful with that as well.
Or sell Your friends kidneys and pay for the repair
This sucks dude. I could literally purchase a nexus 6 for less than the price to fix this phone. I've looked at every phone out right now and nothing catches my eye like this one. I'd almost opt to buy the 3t before spending 400 to have a shop repair this one
If ur friend has insurance maybe they would pay for it. If not.
A new screen costs around 200$ from ebay or etrade supply. Those one come even without a samsung logo like the models in asia. Which imo looks super cool. If you a that screen transfering the old stuff isn't that hard. And there are many tutorials online. Maybe you could split? I mean he dropped it even if it's on accident he could give like 100$ then you have to spend 100$.
You could sell ur S7 edge. Trust me if it's just cracked and everything else is working you will find someone that buys it. In Germany you could get something between 250€~ 300€ for that. And then you spend again maybe 200€ and get a new or used one thats in good condition.
There are few options that you have. I wouldn't go to repair shops because they are often overpriced and don't treat ur stuff well.
And one last thing. Forget about replacing only the glas because that is impossible.
So if I buy the whole lcd assembly, all I need to do is heat up the back, cut the adhesive with a guitar pick, remove screws and unhook the connectors and replace?
yes exactly like that. like i said there are a ton of guides like on ifixit or on youtube. bur instead of a guitar pick i would you a playing card or pokemon card or something. the guitar pick or metal tools can scratch the backplate and the "sticker".
This morning I stupidly shattered the glass on my HN8. I propped it up whilst talking on Skype then it fell face down on the floor. The glass is completely shattered. However the the digitiser and touch screen all appear to be working fine with no bleed or loss of touch sensitivity anywhere on the screen. So I'm guessing I could just replace the glass or get one of these little repair shops you see around to do it? Any advice would be great right now. Seems such a shame. Saw a German Youtube on how to change the glass on a Huawei P8 possibly looks like it might be a bit too involved for my skill level?
Going to get it fixed at local mobile repair shop. £195 and it will take about a month. Moral of the story DO NOT DROP and smash your screen!!! Had a look on ebay and a few other places £150 for digitiser and screen frame, but not brave enough to attempt repair myself. The only good thing to come out of this is when I get it back. Nougat might be available. Did I mention... Don't drop your phone and smash your screen?
https://www.youtube.com/watch?v=A3kP2NOT9kA
Sorry to hear that, did you have the official matrix case? can highly recommend, only a few dollars more ali express.
sanein said:
https://www.youtube.com/watch?v=A3kP2NOT9kA
Click to expand...
Click to collapse
Also I hate Big bulky cases. The Handset is big enough. I realise It probably would have spared my screen, but still. Thanks for taking time to offer a solution though. Appreciated!!!:good:
I have already handed my device in for repair. doesn't look too involved in this video. However I still don't feel confident enough to attempt something like this. Maybe the next time I shatter the screen In all seriousness though Just be aware if you fix your phone by yourself or get it done like I have, It's not going to be a cheap, quick job.
Take good care of your HN8'sguys!
generic2 said:
Also I hate Big bulky cases. The Handset is big enough. I realise It probably would have spared my screen, but still. Thanks for taking time to offer a solution though. Appreciated!!!:good:
I have already handed my device in for repair. doesn't look too involved in this video. However I still don't feel confident enough to attempt something like this. Maybe the next time I shatter the screen In all seriousness though Just be aware if you fix your phone by yourself or get it done like I have, It's not going to be a cheap, quick job.
Take good care of your HN8'sguys!
Click to expand...
Click to collapse
I think the main problem is availability of the display unit, where did you find yours? I
sanein said:
I think the main problem is availability of the display unit, where did you find yours? I
Click to expand...
Click to collapse
Like I said, I took it in for repair to a repair shop so, They are sourcing digitiser display. Probably One from China I would imagine.
You can get the LCD assembly on Aliexpress for 120GBP/148USD/198AUD
I think it's a bit cheaper than eBay.
ozzy lion said:
You can get the LCD assembly on Aliexpress for 120GBP/148USD/198AUD
I think it's a bit cheaper than eBay.
Click to expand...
Click to collapse
Done now. Want to forget about it. Left a bitter taste in my wallet.
Unfortunately my screen broke, the LCD is working fine, and recognizes touches.
Is it possible to change only the glass and digitizer? Eg
I'm afraid of LCD panels from eBay. The service said that warranty is void at all events (even if they repair it).
I'm currently in the same situation. Any update on your phone's screen?
A local repair shop can't fix it unless I buy a panel myself and let them fix it for me. I want to know what I need if the glass is broken, but touches and LCD are fine: just glass or a complete screen replacement, like this one: https://www.aliexpress.com/item/Rau...Panel-Replacement-for-Xiaomi/32835465822.html .
I will order a complete LCD panel with frame and try to replace myself. But I don't know if they are the same quality as original.
erikieperikie said:
I'm currently in the same situation. Any update on your phone's screen?
A local repair shop can't fix it unless I buy a panel myself and let them fix it for me. I want to know what I need if the glass is broken, but touches and LCD are fine: just glass or a complete screen replacement, like this one: https://www.aliexpress.com/item/Rau...Panel-Replacement-for-Xiaomi/32835465822.html .
Click to expand...
Click to collapse
Let us know when you do! Please also specify which replacement you bought. It's a good idea to document these things, because in the coming years many more people will break their screens, unfortunately, but we can help them finding out what screens are worth buying.
I'm especially interested in touch performance and LCD similarity to the original. If you could pay attention to those properties and comment on them when you know, that would be really helpful.
Never try replacing one yourself, no matter how tempting and easy it looks on youtube videos, without proper gears and experience, you will end up damaging the whole panel. I know because I tried and failed myself and ended up buying the whole front panel with the LCD.
It will be much cheaper to buy it off ebay and let a experienced guy do it.
Did you tried with LCD+frame kit? It looks much easier that way. What happened exactly?
billysam said:
Never try replacing one yourself, no matter how tempting and easy it looks on youtube videos, without proper gears and experience, you will end up damaging the whole panel. I know because I tried and failed myself and ended up buying the whole front panel with the LCD.
It will be much cheaper to buy it off ebay and let a experienced guy do it.
Click to expand...
Click to collapse
Sec0nd said:
Did you tried with LCD+frame kit? It looks much easier that way. What happened exactly?
Click to expand...
Click to collapse
I was trying the glass with digitizer which was pretty much cheap, which needs to be removed with proper gears and lot of patience with a heat gun(I have seen local shop guys doing it without them with ease), It was an old samsung s3 which I kept to experiment on, ended up buying the whole front assembly which I did installed successfully(made me feel a lot better). That looks easy and there is less of chance of any breaking, unless you are very careful in removing all the tiniest sensors and wire and put them accordingly, but then you have to carefully pick the whole assembly there are plenty of low quality ones around, where you might get one that gives issues. for instance on Samsung s3 it was an original amoled display. but I got one that was an LCD panel display and there were issues where brightness sensor didn't worked at all.
Your best bet would be an original LCD+frame kit, I don't know if you really can get one off ebay.
So my three advices.
1. try to get only the glass with digitizer off ebay(If your Display works), then let a local expert change it. much cheaper and let you avoid getting a low quality LCD panel.
2. If it's your first time, I would suggest doing it on a cheaper phone to test your skills, I wouldn't recommend doing it for first timers who have no experience of doing it. there is high possibility that you might break a sensor or a wire.
3. if you want to go ahead with a whole new kit from ebay, make sure you check it without removing any sticker, and connect that display with the motherboard and see if the display is really good and make sure you check the brightness and touch. only if you are satisfied then go ahead, or return the product.
Thank you for the advices!
I couldn't find anybody, who can replace only the glass and digitizer.
The screen and digitizer work fine, only the glass is broken.
billysam said:
I was trying the glass with digitizer which was pretty much cheap, which needs to be removed with proper gears and lot of patience with a heat gun(I have seen local shop guys doing it without them with ease), It was an old samsung s3 which I kept to experiment on, ended up buying the whole front assembly which I did installed successfully(made me feel a lot better). That looks easy and there is less of chance of any breaking, unless you are very careful in removing all the tiniest sensors and wire and put them accordingly, but then you have to carefully pick the whole assembly there are plenty of low quality ones around, where you might get one that gives issues. for instance on Samsung s3 it was an original amoled display. but I got one that was an LCD panel display and there were issues where brightness sensor didn't worked at all.
Your best bet would be an original LCD+frame kit, I don't know if you really can get one off ebay.
So my three advices.
1. try to get only the glass with digitizer off ebay(If your Display works), then let a local expert change it. much cheaper and let you avoid getting a low quality LCD panel.
2. If it's your first time, I would suggest doing it on a cheaper phone to test your skills, I wouldn't recommend doing it for first timers who have no experience of doing it. there is high possibility that you might break a sensor or a wire.
3. if you want to go ahead with a whole new kit from ebay, make sure you check it without removing any sticker, and connect that display with the motherboard and see if the display is really good and make sure you check the brightness and touch. only if you are satisfied then go ahead, or return the product.
Click to expand...
Click to collapse
Sec0nd said:
Thank you for the advices!
I couldn't find anybody, who can replace only the glass and digitizer.
The screen and digitizer work fine, only the glass is broken.
Click to expand...
Click to collapse
I saw MiA1 LCD panel, Touchscreen and digitizer which is around $39-$46 on ebay, while I couldn't find just the glass with Digitizer. I think the best bet right now would be with the full kit with LCD. as they aren't selling without the LCD at the moment.
Although I would suggest you keep the original LCD panel with broken glass,(don't try to remove it yet, let the glue wear off itself until then) in case they do start to sell in future the glass with digitizer only. There could be a next time(who knows? or you can just sell that to someone), where you will at least have an original LCD, these things break very easily. be sure to keep them safe, and if you feel confident enough, you can try it yourself, just be careful with the glue, and the pins. go gentle, it's a surgery. best of luck!
I found several glass with digitizer on eBay: https://www.ebay.com/sch/i.html?_fr...RS0&_nkw=Xiaomi+A1+touchscreen+glass&_sacat=0
billysam said:
I saw MiA1 LCD panel, Touchscreen and digitizer which is around $39-$46 on ebay, while I couldn't find just the glass with Digitizer. I think the best bet right now would be with the full kit with LCD. as they aren't selling without the LCD at the moment.
Although I would suggest you keep the original LCD panel with broken glass,(don't try to remove it yet, let the glue wear off itself until then) in case they do start to sell in future the glass with digitizer only. There could be a next time(who knows? or you can just sell that to someone), where you will at least have an original LCD, these things break very easily. be sure to keep them safe, and if you feel confident enough, you can try it yourself, just be careful with the glue, and the pins. go gentle, it's a surgery. best of luck!
Click to expand...
Click to collapse
billysam said:
I saw MiA1 LCD panel, Touchscreen and digitizer which is around $39-$46 on ebay, while I couldn't find just the glass with Digitizer. I think the best bet right now would be with the full kit with LCD. as they aren't selling without the LCD at the moment.
Although I would suggest you keep the original LCD panel with broken glass,(don't try to remove it yet, let the glue wear off itself until then) in case they do start to sell in future the glass with digitizer only. There could be a next time(who knows? or you can just sell that to someone), where you will at least have an original LCD, these things break very easily. be sure to keep them safe, and if you feel confident enough, you can try it yourself, just be careful with the glue, and the pins. go gentle, it's a surgery. best of luck!
Click to expand...
Click to collapse
I love advices like that.U r smart.
I've also cracked my screen.... happened yesterday when I accidentally dropped it on concrete. Touch is working fine, only glass is broken.
So would be buying only the digitizer like this one: goo.gl/ZDPoFd do its job if I let it do at the local repair shop or buy the whole LCD as mentioned above?
Roykooiman said:
I've also cracked my screen.... happened yesterday when I accidentally dropped it on concrete. Touch is working fine, only glass is broken.
So would be buying only the digitizer like this one: goo.gl/ZDPoFd do its job if I let it do at the local repair shop or buy the whole LCD as mentioned above?
Click to expand...
Click to collapse
You're going to need to ask your local repair shop. Some shops will be able to replace the digitzers, others only do the full LCD assembly. Again others will not even accept repairs where you bring in the parts, they'll source the parts themselves.
Localhorst86 said:
You're going to need to ask your local repair shop. Some shops will be able to replace the digitzers, others only do the full LCD assembly. Again others will not even accept repairs where you bring in the parts, they'll source the parts themselves.
Click to expand...
Click to collapse
I've contacted a local repair shop and said they couldn't do only the digitizer, but they can do the whole LCD repair which will cost me 25 euro. Now I have to find the right one..... as you have so much variant on Ebay and Alie. U have a suggestion on which one to choose?
My MI A1 display is craked .but display is working and phone functions are working .just I ask you if I using the craked display for long time is it problem come.phone sold 3 days ago so I cannot want to repair the lcd. .Plz advice
I bought this one: https://www.aliexpress.com/item/Ori...izer-Display-For-Xiaomi-MiA1/32831902856.html
I let a local phone repair shop do the repair for me. They did a great job. The screen itself is also great. I think it could be an original, as I can't tell any difference. The colours seem the same, it measures up to 10 simultaneous touches (like the original), the performance feels identical. I recommend this screen! I've also left a review with pictures on Ali Express, but it's still being processed.
I ordered a white screen for my black Mi A1, so now I have a stormtrooper! (or panda, whatever you want...)
Screen plus repair in total about €60, well worth it IMO. It's quite a fraction of the original purchase price, but hey, I shouldn't have dropped the phone after a month. I've also ordered a plain black back cover to help me better grip the device.
erikieperikie said:
I bought this one: https://www.aliexpress.com/item/Ori...izer-Display-For-Xiaomi-MiA1/32831902856.html
I let a local phone repair shop do the repair for me. They did a great job. The screen itself is also great. I think it could be an original, as I can't tell any difference. The colours seem the same, it measures up to 10 simultaneous touches (like the original), the performance feels identical. I recommend this screen! I've also left a review with pictures on Ali Express, but it's still being processed.
I ordered a white screen for my black Mi A1, so now I have a stormtrooper! (or panda, whatever you want...)
Screen plus repair in total about €60, well worth it IMO. It's quite a fraction of the original purchase price, but hey, I shouldn't have dropped the phone after a month. I've also ordered a plain black back cover to help me better grip the device.
Click to expand...
Click to collapse
Do buttons light work ?
NITRO_100 said:
Do buttons light work ?
Click to expand...
Click to collapse
Yes! See attached images. The LED also works, but isn't on in the pictures.
erikieperikie said:
Yes! See attached images. The LED also works, but isn't on in the pictures.
Click to expand...
Click to collapse
You are lucky then, because it's common for Xiaomi that the buttons won't lite when replacing screen.
NITRO_100 said:
You are lucky then, because it's common for Xiaomi that the buttons won't lite when replacing screen.
Click to expand...
Click to collapse
I didn't know that! It wouldn't have been bad, because I don't like the button backlight at all: it's on for too short, it's too bright, it's not like I can't find the buttons and it's not like I don't know what functions the buttons have... I hope we can turn it down or off in the stock ROM in the future!
hey i was wondering how difficult it is to replace just the front glass and digitizer on my S7E? mine is cracked at the bottom, the lcd and digitizer are both good, but the crack is getting worse and pieces are flaking off so i feel like if i dont fix it it might end up screwing up the lcd. I can get a glass/digitizer assembly for about 35 bucks, but if i buy this am i going to be able to install it without f*kn up my phone? ive been looking at youtube videos n stuff and pretty much every one i see theyre replacing the whole assembly with the lcd, which is like $200, is it possible to seperate the lcd from the glass/digitizer fairly easily at home? or should i just let it be and not mess with it?
Hi to be very honest here I've never ever had to replace or fix the glass to my $7 Edge, my $7 Edge is on excellent condition but I'm thinking of one day either updating to the Note 8 or even Note 9. Have you got any quotes yet from repair places
Sent from my SM-G935F using XDA-Developers Legacy app
BDog21 said:
hey i was wondering how difficult it is to replace just the front glass and digitizer on my S7E? mine is cracked at the bottom, the lcd and digitizer are both good, but the crack is getting worse and pieces are flaking off so i feel like if i dont fix it it might end up screwing up the lcd. I can get a glass/digitizer assembly for about 35 bucks, but if i buy this am i going to be able to install it without f*kn up my phone? ive been looking at youtube videos n stuff and pretty much every one i see theyre replacing the whole assembly with the lcd, which is like $200, is it possible to seperate the lcd from the glass/digitizer fairly easily at home? or should i just let it be and not mess with it?
Click to expand...
Click to collapse
On the newer phones is not really possible to separate the different layers on the display. (even back in the days when the layers where a lot easier to separate - it was hard, only on some displays and always the new layers started to separate leading to dust behind them and so on). You must change the whole screen as a one. Sorry... :/
Im a cell phone repair guy. Like stated above you must replace the entire digitizer/lcd assembly. They are pricey. If you have insurance it may be cheaper. Your looking at $200-$250 for a quality unit.
https://www.ebay.com/itm/LCD-Displa...hash=item4b178e5337:m:mtuyciust4Tmlx1CeklwU-g
Then you will want to get a good tool kit like so. Thats another $60
https://www.ifixit.com/Store/Tools/...pEP-Ge4NWU0H9RKOGFUtVKLOoWZ-d4BBoCMwkQAvD_BwE
Then you can follow this for teardown. Just remember you can damage more stuff when working the first time on something like this. It will cost even more money. It might just be better to use insurance or have a pro do it.
https://www.ifixit.com/Teardown/Samsung+Galaxy+S7+Edge+Teardown/56845
BDog21 said:
hey i was wondering how difficult it is to replace just the front glass and digitizer on my S7E? mine is cracked at the bottom, the lcd and digitizer are both good, but the crack is getting worse and pieces are flaking off so i feel like if i dont fix it it might end up screwing up the lcd. I can get a glass/digitizer assembly for about 35 bucks, but if i buy this am i going to be able to install it without f*kn up my phone? ive been looking at youtube videos n stuff and pretty much every one i see theyre replacing the whole assembly with the lcd, which is like $200, is it possible to seperate the lcd from the glass/digitizer fairly easily at home? or should i just let it be and not mess with it?
Click to expand...
Click to collapse
Well yeah its really hard to do it yourself, but changing only the glass is possible. I have tried it on my old samsung galaxy s6 edge. Although i have brought it to a repair shop which supports such change. They use a special separation machine. Try asking around your place. Btw, where you from?
awerqw22 said:
Well yeah its really hard to do it yourself, but changing only the glass is possible. I have tried it on my old samsung galaxy s6 edge. Although i have brought it to a repair shop which supports such change. They use a special separation machine. Try asking around your place. Btw, where you from?
Click to expand...
Click to collapse
nebraska
BDog21 said:
nebraska
Click to expand...
Click to collapse
So were continents away. Lol. Buy yeah its possible, with the right tools. You can do it yourself but its very risky. Some do it manually some use tools. Some separation machines use dry ice.
Also, remember that if you're replacing the entire OLED, glass and digitiser as a single unit, if you're buying a generic replacement rather than Samsung parts, the OLED panel in particular could easily be of inferior quality. Or perhaps not even OLED at all, rather a standard LCD replacement. I'd rather not think of this phone without the quality of screen it has, it's half the appeal and what makes it a premium device in the first place.
its possible, repair is done within 3h.
you can try it at home, you need slim cards and wire, but it's not worth the risk.
I paid 120$ in Poland for glass replacement. they have separating machine - it freeze the glue so it's easy to take the glass off the screen. later it's just loca or oca