Will Only Boot Into Download Mode
Currently running BlackPearl Rom Android 8.1.0
Won't let me re-install earlier 7.0.0 firmware
gives me Complete(Write) operation failed
Also I've got the "SW REV. CHECK FAIL. DEVICE: 2 , BINARY: 1" error
please help
Related
Ok so i tried rooting my snapdragon G950U S8 well it failed and now i cant boot into system cause all i get is the blue screen with installing system update then no command I then boot into download mode and then use odin with 4 files from updato.com I looked up my phone is USA CSPIRE ACG its got the bootloader 2.......Well it cant get it to work. I keep getting Complete(Write) Operation Failed while on the phone i get SW REV CHECK FAIL : (ABL)Fused 4 > Binary 2
I just need to know what I need to do to get my phone back to working.
If you need anymore information I will be glad to give it.
my g930p phone was on 6.0.1 i used combination files and flashed to factory binary now
"MODEL : SM-g930V [SS]"
PDA: FA60_G930AUCU8ARJ2
PHONE: G930AUCU8ARJ1
H/W: REV0.6
and when i try to flash to stock G930PVPU4APL6 firmware i get a "sw rev check fail: [boot] fused 8 > binary 4" can someone please help get me back to stock firmware
boglysenko said:
my g930p phone was on 6.0.1 i used combination files and flashed to factory binary now
"MODEL : SM-g930V [SS]"
PDA: FA60_G930AUCU8ARJ2
PHONE: G930AUCU8ARJ1
H/W: REV0.6
and when i try to flash to stock G930PVPU4APL6 firmware i get a "sw rev check fail: [boot] fused 8 > binary 4" can someone please help get me back to stock firmware
Click to expand...
Click to collapse
You can't flash a firmware with binary 4 if you are on binary 8. You need to install a firmware with binary 8.
I need help im stuck in the same situation Enmanuel255 could you please help us
My phone is a verizon s7
SM-G930V
PDA FA60_G930AUCU8ARJ2
PHONE G930AUCU8ARJ1
MEMORY 32GB iam able to flash using a custom binary room this file allows me to get in binary mode (COMBINATION_VZW_FA60_G930AUCU8ARJ2_VZWFAC_CL7396706_QB20148956_REV02_user_mid_noship_MULTI_CERT.tar)
but after i try to reflash to the stock firmware i get a fail message please help.
pluy said:
I need help im stuck in the same situation Enmanuel255 could you please help us
My phone is a verizon s7
SM-G930V
PDA FA60_G930AUCU8ARJ2
PHONE G930AUCU8ARJ1
MEMORY 32GB iam able to flash using a custom binary room this file allows me to get in binary mode (COMBINATION_VZW_FA60_G930AUCU8ARJ2_VZWFAC_CL7396706_QB20148956_REV02_user_mid_noship_MULTI_CERT.tar)
but after i try to reflash to the stock firmware i get a fail message please help.
Click to expand...
Click to collapse
What issue specifically?
[/COLOR]
boglysenko said:
my g930p phone was on 6.0.1 i used combination files and flashed to factory binary now
"MODEL : SM-g930V [SS]"
PDA: FA60_G930AUCU8ARJ2
PHONE: G930AUCU8ARJ1
H/W: REV0.6
and when i try to flash to stock G930PVPU4APL6 firmware i get a "sw rev check fail: [boot] fused 8 > binary 4" can someone please help get me back to stock firmware
Click to expand...
Click to collapse
If you dnt like bloatware on your phone then its good to install G930U firmware on your phone and its updated to V8 so no binary error when flashing..
https://updato.com/firmware-archive-...15FA163EE8F90B
Bricked my s8+ hope someone can help!
Model SM-G955F
I tried to root it couldn't get some stuff working I ended up going in dev options and turned OEM unlocking either on or off..Then tried to root... Ended up getting the FRP lock and tried to flash to basic rom again.
I'm currently trying to use Odin to install this rom:
DOWNLOAD SAMSUNG GALAXY S8+ SM-G955F EVR UNITED KINGDOM (EE) G955FXXS6DTA1 FIRMWARE on SAMMOBILE
If I try turn it on it says
An error has occured while updating the device software. Use the emergency recovery function in the smart switch pc software. I tried to use smart switch to fix it but they removed the section where you search for models and I used a old verison which said the device was not supported
If I try use odin whilst in download mode it gives the following error
SW REV. Check fail )bootloader) device: 7 Binary: 6 (I think it says SW REV my eyes are terrible and its hard to read lol)
I'm thinking about taking the loss and just selling it on ebay as broken unless someone can help.
Thanks guys
Tobbo88 said:
Bricked my s8+ hope someone can help!
Model SM-G955F
I tried to root it couldn't get some stuff working I ended up going in dev options and turned OEM unlocking either on or off..Then tried to root... Ended up getting the FRP lock and tried to flash to basic rom again.
I'm currently trying to use Odin to install this rom:
DOWNLOAD SAMSUNG GALAXY S8+ SM-G955F EVR UNITED KINGDOM (EE) G955FXXS6DTA1 FIRMWARE on SAMMOBILE
If I try turn it on it says
An error has occured while updating the device software. Use the emergency recovery function in the smart switch pc software. I tried to use smart switch to fix it but they removed the section where you search for models and I used a old verison which said the device was not supported
If I try use odin whilst in download mode it gives the following error
SW REV. Check fail )bootloader) device: 7 Binary: 6 (I think it says SW REV my eyes are terrible and its hard to read lol)
I'm thinking about taking the loss and just selling it on ebay as broken unless someone can help.
Thanks guys
Click to expand...
Click to collapse
You are trying to flash older firmware than what is on your phone. Device 7 = current bootloader version on phone.Binary 6 = bootloader your trying to flash.
When looking at firmware names the 5th number from the right is the bootloader version number of the firmware you are downloading.You will need version 7 bootloader firmware or higher to flash in Odin.
spawnlives said:
You are trying to flash older firmware than what is on your phone. Device 7 = current bootloader version on phone.Binary 6 = bootloader your trying to flash.
When looking at firmware names the 5th number from the right is the bootloader version number of the firmware you are downloading.You will need version 7 bootloader firmware or higher to flash in Odin.
Click to expand...
Click to collapse
The one I'm downloading says its the latest version tho
Tobbo88 said:
The one I'm downloading says its the latest version tho
Click to expand...
Click to collapse
I have checked and for EVR (EE) version 6 bootloader is the latest one out.
All I can suggest is wait for an update or flash BTU firmware which is on version 7 firmware.
For downloading latest firmware use PC app called frija or samfirm. Far quicker than downloading through sammobile.
Frija
https://forum.xda-developers.com/s10-plus/how-to/tool-frija-samsung-firmware-downloader-t3910594
Or samfirm
https://samfirm.en.lo4d.com/windows
spawnlives said:
I have checked and for EVR (EE) version 6 bootloader is the latest one out.
All I can suggest is wait for an update or flash BTU firmware which is on version 7 firmware.
For downloading latest firmware use PC app called frija or samfirm. Far quicker than downloading through sammobile.
Frija
https://forum.xda-developers.com/s10-plus/how-to/tool-frija-samsung-firmware-downloader-t3910594
Or samfirm
https://samfirm.en.lo4d.com/windows
Click to expand...
Click to collapse
Thanks loads for your help!
I've got the file manage to get around 90% of the bar done then it fails just after saying cache.img then I get red error on the screen which says Custom Binary(USERDATA) Blocked by FRP Lock
<ID:0/003> Now Writing.. Please wait about 2 minutes
<ID:0/003> Receive Response from boot-loader
<ID:0/003> cache.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any ideas?
Thanks again
Hello everyone!
I have got an official update via wifi for my Samsung Galaxy J5 Prime (SM-G570F), which broke my phone after the update.
After update was install phone gone to reboot. After reboot I see only this message:
system rev. check fail device 1 binary 0
Odin don't see any connection of my phone.
How to debrick my phone? Please help.
i wanted to root my device so i flashed twrp for sm-g9350 and now my phone is stuck in boot loop. i tried installing a firmware from 2019 but it say
sw rev check fail: [aboot] fused 5> binary 4 . i only have a non premium account on sammobile so i cant download the latest firmware.​https://www.sammobile.com/samsung/g...e/SM-G9350/CHC/download/G9350ZCS5CTA1/313222/ can anyone help me with this