Related
Hello,
I Hard Bricked My LG Optimus L3 E400 And On The Forums Somewhere I Found A Method Using QPST I Can Unbrick IT!
I am Not Able To Turn On The Device! (When I Try To Switch IT On IT Just Vibrates Once)
I am Not Able To Use Any Key Combos {For E.g Recovery Or Emergency Mode} (The Capctive Buttons Light Up For A Second Or Two, The Device Vibrates And Then Again Dead!)
When I Try To Fix IT Using QPST I Get An Error "Unable To Acquire A Lock On The Selected Phone"
How To Fix This??
I Used The Following Method ---->
Used Lg Extract To Unpack Kdz File (V10L_00.kdz)
Used DzDcrypt To Unpack The cab File I Got After Unpacking KDZ File!
It Needed A EMMCBLD.hex File For The Device Which I Could Not Find! So I Used bin2hex Converter And Converted emmc_appsboot.bin to EMMCBLD.hex
The ARMPRG I Used Is MSM7225A (NAND Flash)
Boot System - Multi Img 1.0
Please Help Me And Tell Me What Wrong I Am Doing PLEASE HELP ME!! PLEASE!!
Screenshots :
Turn off your phone, remove the battery and connect your phone to your PC. Then you should see animation shoving you to put battery in and put the battery cover back, while it's shoving you that, your phone is in so called "download mode".
mr_techno said:
Turn off your phone, remove the battery and connect your phone to your PC. Then you should see animation shoving you to put battery in and put the battery cover back, while it's shoving you that, your phone is in so called "download mode".
Click to expand...
Click to collapse
Well Bro I Can Enter The Download Mode By
Remove Back Battery> Plug In USB While Holding Volume Down Button
I have the same problem plz give me solution or your contact no so that I can talk to u for solution mine no is 9988911729. Plzplzpl
robin ck said:
I have the same problem plz give me solution or your contact no so that I can talk to u for solution mine no is 9988911729. Plzplzpl
Click to expand...
Click to collapse
Hello, Are You Still Stuck With The Problem?
Sorry For Replying WAY TO LATE
problem
AppY.fTw.wOw^ said:
Hello, Are You Still Stuck With The Problem?
Sorry For Replying WAY TO LATE
Click to expand...
Click to collapse
yes bro
robin ck said:
yes bro
Click to expand...
Click to collapse
Well then i would suggest to go to a local mobile repair shop they will charge around 600 INR!
The Problem is we can no more flash the phone using USB ports, we need a serial port and a RIff Box JTAG Tool Which Requires Soldering Job So Better Let Them Do It!
I Did The Same Thing
Hope You Get It Fixed ASAP!
Hey guys i've Hard Bricked my Yureka. Phone Doesnt turn on nor goes to fastbooot, instead is only detected in windows as Qusbs-Bulk. Please help ME
Follow the steps shown in link below;
https://cyngn.com/support/
http://forums.yuplaygod.com/threads/factory-images-and-flashing-tools-official.2178/
But my phone does not boot into fastboot
Search at play god forum, there are some procedures given there which may solve your prob. http://forums.yuplaygod.com/threads/help-completely-bricked.4641/#post-45794
HI thanks for help but in all above cases they were soft bricked ..i.e their phones booted in fastboot but mine isnt.
Hmmm ... seriously worried situation haan. {Kiya kya tumne}
If you can tell us what exactly you did, may be then we can help.
I also hardbricked when i tried to port MIUI. But i got replaced by YU without any cost and within 3 days
Exactly me too flashed miui of f2 without boot.img..Was trying to port...
@ Suhas Is the new phone same as old one or a used one??
suhas.holla said:
I also hardbricked when i tried to port MIUI. But i got replaced by YU without any cost and within 3 days
Click to expand...
Click to collapse
I also hardbricked when i tried to port MIUI, Now waiting for the repacement.
Called them and raised the ticket 6 days before, but they are yet to dispatch.. . . . Very frustrating !
Do you have any information on how to unbrick. I searched much but wouldn't find files to unbrick !
1. 8939_msimage.mbn
2. MPRG8939.hex
3. rawprogram0.xml
4. patch0.xml
Hope some one comes to rescue me :crying:
Video Tutorial HOW TO UNBRICK YUREKA
Srry i cant post the youtube link as i am new here
Just go to youtube
Search kanwal deep unbrick yureka
And watch the video
To go in fastbool mode remove battery insert again and press vol up while connecting usb
quakze said:
I also hardbricked when i tried to port MIUI, Now waiting for the repacement.
Called them and raised the ticket 6 days before, but they are yet to dispatch.. . . . Very frustrating !
Do you have any information on how to unbrick. I searched much but wouldn't find files to unbrick !
1. 8939_msimage.mbn
2. MPRG8939.hex
3. rawprogram0.xml
4. patch0.xml
Hope some one comes to rescue me :crying:
Click to expand...
Click to collapse
ahh Same situation I too searched for that files when i had bricked my device
Since the chipset is new. So not able to find
suhas.holla said:
ahh Same situation I too searched for that files when i had bricked my device
Since the chipset is new. So not able to find
Click to expand...
Click to collapse
I have got rom of Huawei C199s (MSM8939), which has many file packed into UPDATE.APP.
I have unpacked it, but the file name and extensions are unknown.
At present I am trying to identify the msimage.mbm and mprg files.
The rom link is http://www.needrom.com/wp-content/uploads/2015/03/C199s-V100R001C92B260-Telecom.zip
Shrihari007 said:
Hey guys i've Hard Bricked my Yureka. Phone Doesnt turn on nor goes to fastbooot, instead is only detected in windows as Qusbs-Bulk. Please help ME
Click to expand...
Click to collapse
ask for replace in customer care. as they told they will replace your mobile even after unlocking boot loader, root.
my device also gone hard bricked not get into the fastboot mode..
and no customer care no. to contact not correct > this one 18602122122
any help
thnks..
You guys can take a look at this thread -
http://forum.xda-developers.com/yureka/help/question-qualcomm-download-mode-k-t3068040
Hit thanks to the creator and me if helped.
suhas.holla said:
I also hardbricked when i tried to port MIUI. But i got replaced by YU without any cost and within 3 days
Click to expand...
Click to collapse
What did you tell the customer support about your phone getting bricked.
I tried calling the support, but they said that they will chargers. 3000 for replacing .
please help
my device got bricked 2 days ago and now there is no fastboot mode and not even the led lights showing up if the device is connected to the pc!! and whats even worse the cc is not picking up the calls
my mobile also hard bricked.
suhas.holla said:
I also hardbricked when i tried to port MIUI. But i got replaced by YU without any cost and within 3 days
Click to expand...
Click to collapse
hi.... my yu yureka also get hard bricked after installing lollipop update from yu.. please tell me the steps you followed to replace your yureka...... please reply fast...
:crying::crying::crying:
issue regarding in functionality in yu yureka after upgrading with lpllipop
dear sir,
my name is anurag. i am using yureka ao 5510 phone after launching official update for phone i upgrade my phone.
i faced sevral problem after updating. the list are provided below.
1) overheating device than normal one while comparing with kitkat.
2) automatically turned off and un- responsive and on screen multicolor circle appeared wih cross over circle, its upto 5-6 hrs after that suddenly screen appeared after turning on mobile and start working.(in this process sevral times i remove battery & reinsert and trying to start it normally).
3) when phone connecting to wi-fi hotspot network (apple tablet over 3g) and i am trying to update apps from playstore its not updated(google play services unfortunately stopped) over wi fi network, but its working good on mobile data.
4) now currently issue in brightnesss control and in setting < storage option < USB computer connection the checkbox option are not apperared & phone not connected to computer(using windows 8.1 ),
please kindly fix this buges...
and provide some patch or system updates as earliar as possible to overcomethis issue.
Hi, i want to fix a phone of my friend by flashing it with odin, but things go wrong, the phone after failing wont start or respond to any button, i dont know what to do, please any help would be appreciated
Samsung Galaxy J1 SM-J100H
Edit:
Thanks xEmre66 for your reply, unfortunately no, i think i break the boot image, the phone wont boot on download mode even if i use 300k jig, i think the only solution is to use an sd card filled with the boot image, but i dont find in website a solution like that.
I tryed many solution but no one work, please if someone have the some problem tell me.
Can you get into the DownloadMode? (ODIN MODE)???
Sent from my SM-J100H using XDA-Developers mobile app
---------- Post added at 08:58 AM ---------- Previous post was at 08:57 AM ----------
I have this phone but it is not my main phone but maybe I can help you.
Sent from my SM-J100H using XDA-Developers mobile app
i'm working on this problem..
i resolved,
share there
OSKCHAST said:
i resolved,
share there
Click to expand...
Click to collapse
Please can you share the solution ?, i cant fix the phone.
same problem here
I have same problem here, samsung j100h of my friend do not boot, i download odin and correct rom to flash i flashed device correctly, but device now is fully dead, display not start, black screen, my win10 not recognise device, now cant flash using odin and using sp_flashtool....
device respond at win10 when i push vol up + power but can't make anything
i try to install all drivers signed and unsigned from samsung and mkt.. nothing works any idea???
caseres84 said:
I have same problem here, samsung j100h of my friend do not boot, i download odin and correct rom to flash i flashed device correctly, but device now is fully dead, display not start, black screen, my win10 not recognise device, now cant flash using odin and using sp_flashtool....
device respond at win10 when i push vol up + power but can't make anything
i try to install all drivers signed and unsigned from samsung and mkt.. nothing works any idea???
Click to expand...
Click to collapse
You broke the boot image. I'm sorry but you hard bricked the device. I had this phone but it was terrible because of its touchscreen. Maybe I could help you. Send me a PM and describe how you really broke the device.
xEmre66 said:
You broke the boot image. I'm sorry but you hard bricked the device. I had this phone but it was terrible because of its touchscreen. Maybe I could help you. Send me a PM and describe how you really broke the device.
Click to expand...
Click to collapse
same in here. I flash original rom from sam mobile site and my samsung sm-j100h is bricked now. i flash using odin and everthing was ok and it was pass. but nothing happend later on, screen remains black and I don't know what to do.
or atleast tell me can I get somehow all data stored on phone, if yes how to do it
guys still nothing???
same problem guys i bricked the phone 2 days ago with the original firmware from sam mobile u.u i put my samusung j1 in download mode and with odin i done the reflash odin it was green and said me passed but then when i tried to turn on the phone nothing happened my phone is died hard bricked is there a guys something to do to repair him?
i got the same problem..
the phone was completely DEAD after i followed all the instructions here => https://www.youtube.com/watch?v=1T9fxno2s68
Please somebody help us..
Here's my thread => http://forum.xda-developers.com/android/help/help-sm-j100h-dead-power-flash-t3511894
Thank you very much..
im using sm j110h and i too flashed orginal stock rom via odin but unfortunately i forget to put the batteries on and i fonud that after that i got pass message only now the screen remaines black and not getting to download mode and not switching on. does anyone help me on this problem hope will get a solution thanks in advance
Gal J1 of sadness.... but still hoping
2 days ago a friend asked me to fix his J1 stuck in boot image. I gladly said yes for I've done it 4x already different units same model with satisfying results. This one is the exact opposite because after flashing with Odin and getting the Passed result, the phone didn't reboot. Actually it never booted right after that moment. System didn't recognize the phone not even a dim light or blink or any reaction from it even when plugged in a wall charger. tried all possible solutions even the galaxy tab procedure of total batt drain and so on. The firmware I got is from xda, J100MLDXU0AOB3_OLC0AOB5_v4.4.4_Repair_Firmware.zip, and I'm sure it's fine because I've used it already with good results...
Guys, any of you with a solution on this or any suggestions would be much appreciated... Thanks very much in advance!!! :fingers-crossed:
Chrisjopett said:
2 days ago a friend asked me to fix his J1 stuck in boot image. I gladly said yes for I've done it 4x already different units same model with satisfying results. This one is the exact opposite because after flashing with Odin and getting the Passed result, the phone didn't reboot. Actually it never booted right after that moment. System didn't recognize the phone not even a dim light or blink or any reaction from it even when plugged in a wall charger. tried all possible solutions even the galaxy tab procedure of total batt drain and so on. The firmware I got is from xda, J100MLDXU0AOB3_OLC0AOB5_v4.4.4_Repair_Firmware.zip, and I'm sure it's fine because I've used it already with good results...
Guys, any of you with a solution on this or any suggestions would be much appreciated... Thanks very much in advance!!! :fingers-crossed:
Click to expand...
Click to collapse
PM me pls and tell me how you flashed it etc.
Help
I have same problem,hard brick.Can anyone help?
somebody got solution? i did update by kies and now the phone is dead at all. i can use odin mode and also can using recovery anymore. hmm i think my problem come from the battery :crying:
kkq29 said:
somebody got solution? i did update by kies and now the phone is dead at all. i can use odin mode and also can using recovery anymore. hmm i think my problem come from the battery :crying:
Click to expand...
Click to collapse
Can you get into Odin Mode? If yes, flash the stock firmware of your region (here is a fast server which provides very fast downloads: fw.updato.com) If no, then you should change your battery as you're saying "it came from my battery" and try the first step again.
If it doesn't help as expected, then your phone is hard bricked and can't be repaired at all. The only solution would be changing the motherboard, but I would not waste my money on a low-end device motherboard and I would directly buy a new phone. :/
Regards,
xEmre66
If I am correct...
Then SM-J110H have Spreadtrum SC7727S
Here is Pinout for Direct eMMC...
https://postimg.cc/image/ul680l5jv/
This Pinout seems also to work with:
Code:
SM-G318HZ
SM-Z130H
I have leaked SM-Z130H PDF... where Instruction is inside to repair with tweezer... USB cable + Spreadtrum Tool:
Code:
[B]ResearchDownload[/B]
In theory something similar should be possible with SM-J110H...
I have at the moment only 1 problem... to create PAC file...
No idea from where I can get:
Code:
FDL1
FDL2
Best Regards
Edit 1.
Sorry, seems I was drunken...
It is sooo hard to find Posts or Threads about SM-J110H...
But it seems SM-J100H also Spreadtrum device...
xEmre66 said:
PM me pls and tell me how you flashed it etc.
Click to expand...
Click to collapse
PM me too please
My teacher phone has a same problem, hehehe.
same problem here. my phone got stuck up with samsung logo then i just dowloaded a firmware on sammobile and i flash it via odin at first it passed then my phone did'nt turn on anymore.
J100H / DD Finding Deadboot solution
Hi ... guys me too having this sort of problem and i found bad about samsung using 32bit - Spreadtrum SC8830A EMMC chipset here
Fix solution Not Found still! if i done i will tell you!
on = SM-J100H/DD --- corp =samsung yateley, uk
ok friend iam searching for Solution for 3days bt i found none= with a clue
It is J100H on serial port= SPRD U2S Daig (ComXX) usb says= SPRD COM Emumerator
this means - all sprd flashing been done on this 2 port only - in Miracle Box it says -
Scanning USB Serial port...
SU2Serial Port: COM64
Connecting to Phone,Wait..
Done.
Infor: SPRD3
Initialize boot19...
>>BootLoad Error. ID: 1
so my option is if we build a sprdp.bin and flash in AP(PDA) it will boot to Download mode
and dont ask me where is that file i dont no - if any one can provide a real backup pit.pit file
via phone to me i can find something and let u know it. Only from a alive phone J100H/DD
plz friends i need help any dumps or pit. and if any one has a alive J100H/DD please tell me.!
so i can get some help from u --If you wish to help
The device is on a bootloop and cannot be powered off until the battery dies. After Leeco splash screen something shows up in Chinese and again this continues (as shown in images).
Unable to access recovery.
What can I do?
Please help.
[email protected] said:
The device is on a bootloop and cannot be powered off until the battery dies. After Leeco splash screen something shows up in Chinese and again this continues (as shown in images).
Unable to access recovery.
What can I do?
Please help.
Click to expand...
Click to collapse
Use sp flesh tool
If u know fast boot process then install twrp recovery
Above both solution available on you tube
sumitgp said:
Use sp flesh tool
If u know fast boot process then install twrp recovery
Above both solution available on you tube
Click to expand...
Click to collapse
Ok...will give it a try.
Thanks.
sumitgp said:
Use sp flesh tool
If u know fast boot process then install twrp recovery
Above both solution available on you tube
Click to expand...
Click to collapse
SP Flash Tool detected my device and it freezed for a long time on "Downloading DA 100%" and it crashed.
Now my device does not even show charging.
Only sign of life is a Red Notification Light when connecting Charger or USB.
Is there anything I can do?
Also..SP Flash Tool no longer recognises my device.
Windows Device Manager shows it as Android MTK Device.
[email protected] said:
Also..SP Flash Tool no longer recognises my device.
Windows Device Manager shows it as Android MTK Device.
Click to expand...
Click to collapse
https://forum.xda-developers.com/leeco-le-1s/development/index-leeco-le-1s-roms-kernels-t3621748
sumitgp said:
https://forum.xda-developers.com/leeco-le-1s/development/index-leeco-le-1s-roms-kernels-t3621748
Click to expand...
Click to collapse
That link opens a thread containing Le1s roms.
What am I supposed to do with that.
I already have stock rom. But the problem is SP flash tool not detecting my phone.
[email protected] said:
That link opens a thread containing Le1s roms.
What am I supposed to do with that.
I already have stock rom. But the problem is SP flash tool not detecting my phone.
Click to expand...
Click to collapse
U can find in that trend telegram group they help u just join telegram le 1s helping GRP
They can assist u via team viewer
For sp flesh tool help
Hi.
My Leeco le s3 x626, helio x20 is bricked with red light.
I Just work with win7, Windows 10, but don't work.
It is recognised like
Mtk usb and with mtk preloaded.
Flashtool, with download give back error or doesn't start.
I see guide for mediateck x6...
b1gb1ng said:
Hi.
My Leeco le s3 x626, helio x20 is bricked with red light.
I Just work with win7, Windows 10, but don't work.
It is recognised like
Mtk usb and with mtk preloaded.
Flashtool, with download give back error or doesn't start.
I see guide for mediateck x6...
Click to expand...
Click to collapse
Hello, if you're still looking for a way to restore, then write to me in private messages, I'll help you with this deal)
bricked my Leeco le s3 x626
AxtExpos said:
Hello, if you're still looking for a way to restore, then write to me in private messages, I'll help you with this deal)
Click to expand...
Click to collapse
Hi, i am new to this and i just bricked my Le s3 x626. please help me. the phone is just showing a red blinking light when i connect the usb cable to charger or pc. tahnks
I have the same problem...
leeco le x626 red light brick
AxtExpos said:
Hello, if you're still looking for a way to restore, then write to me in private messages, I'll help you with this deal)
Click to expand...
Click to collapse
Please what is the solution i need help mine also bricked while trying to root
Hi,
i have the same problem - stuck on red light.
Its recommended to use SP Flashtool to flash Stock.
Before, installing correct VCOM drivers. I've done that successfully.
But now...
I need the Stock ROM for this LeEco Le S3 X626 WITH the scatter file (MT6797_Android_scatter) that is needed for SP Flashtool.
None of the downloadable Stock ROMs i could get contain this scatter file. These Stock ROMs are all for devices that can still access fastboot.
This brick, stuck on red light can't access fastboot anymore..........
Any help? i need this ROM with the scatter file... please!
majo334 said:
Hi,
i have the same problem - stuck on red light.
Its recommended to use SP Flashtool to flash Stock.
Before, installing correct VCOM drivers. I've done that successfully.
But now...
I need the Stock ROM for this LeEco Le S3 X626 WITH the scatter file (MT6797_Android_scatter) that is needed for SP Flashtool.
None of the downloadable Stock ROMs i could get contain this scatter file. These Stock ROMs are all for devices that can still access fastboot.
This brick, stuck on red light can't access fastboot anymore..........
Any help? i need this ROM with the scatter file... please!
Click to expand...
Click to collapse
I have the files you need.
blueasteroid said:
I have the files you need.
Click to expand...
Click to collapse
Hey, i also recently bricked my phone, it has the red light problem and i have the flash tool installed, i am looking for a rom with the scatter files or the files themselves since i can't access fastboot, could you send them over?
Here you have some.
https://www.leakite.com/2017/09/download-letv-le-s3-x622-stock-firmware-flash-file.html
https://bbs.le.com//zt/eui/le_2.html
https://mega.nz/#F!MI9w3T6L
password: !YMutE59mUDbdOs9BoYY59Q
https://www.youtube.com/watch?v=xOKFI_eFq9o
blueasteroid said:
Here you have some.
https://www.leakite.com/2017/09/download-letv-le-s3-x622-stock-firmware-flash-file.html
https://bbs.le.com//zt/eui/le_2.html
https://mega.nz/#F!MI9w3T6L
password: !YMutE59mUDbdOs9BoYY59Q
https://www.youtube.com/watch?v=xOKFI_eFq9o
Click to expand...
Click to collapse
i am panicked
so so so panicked
i tried everything i could already but it is giving me errors and the red led persists, i followed https://forum.xda-developers.com/le-2/help/bricked-le-s3-x626-flashing-twrp-power-t3715937 but it doesn't work at all, just gives me a lot of errors that when i google nothing turns up, when i try to flash only the preloader alone it gets me somewhat through the process but gets stuck and there pops up the same error as always, i will try your files (as i was using the ones provided in the tutorial) tomorrow and report back, thanks for posting them so quickly.
marksklava said:
i am panicked
so so so panicked
i tried everything i could already but it is giving me errors and the red led persists, i followed https://forum.xda-developers.com/le-2/help/bricked-le-s3-x626-flashing-twrp-power-t3715937 but it doesn't work at all, just gives me a lot of errors that when i google nothing turns up, when i try to flash only the preloader alone it gets me somewhat through the process but gets stuck and there pops up the same error as always, i will try your files (as i was using the ones provided in the tutorial) tomorrow and report back, thanks for posting them so quickly.
Click to expand...
Click to collapse
Read the last post in that thread. 2 days ago I was like you. Read carefully.
i don't know at all, but it actually sounds like u didn't have the correct files before... i hope at least! things should work out with tutorials and instructions, i mean we're not that dumb right? but if we don't have the exact matching files..........
i will also try the same procedure with the new files thanks ALOT to blueasteroid, and write my results here.......
marksklava, are u actually on a L3 x626 aswell? cause most seem to operate with a x622
majo334 said:
i don't know at all, but it actually sounds like u didn't have the correct files before... i hope at least! things should work out with tutorials and instructions, i mean we're not that dumb right? but if we don't have the exact matching files..........
i will also try the same procedure with the new files thanks ALOT to blueasteroid, and write my results here.......
marksklava, are u actually on a L3 x626 aswell? cause most seem to operate with a x622
Click to expand...
Click to collapse
i am on an x626, it has a 21 mp camera and i bought it from china, sorry for not replying for 4 days.
---------- Post added at 02:14 PM ---------- Previous post was at 01:50 PM ----------
I get errors still, i believe it is a drivers issue but i don't really know how to fix it, i have tried uninstalling the drivers and installing the ones needed but they do not work at all. What do i do now? Am i out of options? What are the drivers supposed to look and how do i install them? i installed the ones that were provided in the inf file, those give me error 10 and my phone keeps disconnecting and connecting on a different COM port, although the driver seems to be installed, can someone help? If anyone is kind enough to screenshare with me i can do that via skype, discord and teamviewer, i also found a 5 year old camera here so i can catch any errors on video with my phone in the frame now which could be useful. Thanks for reading this, please help me any way you can, every bit helps.
marksklava said:
i am on an x626, it has a 21 mp camera and i bought it from china, sorry for not replying for 4 days.
Click to expand...
Click to collapse
Don't panic, i figured out this thing yesterday with my x626, it was successful and was not too hard in the end! don't worry much about the drivers, its completely normal that u lose connection all the time, it happens to all of us with bricked LeEco. The drivers won't keep still for the procedure, its normal...... I worked with the drivers in the Unbrick LeEco folder from blueasteroid. I installed all the stuff there was, and Windows said: Preloader VCOM 10 - it still switched but this is normal!
It is necessary to have the correct files, the correct paths in SPFlashtool and it only worked (for me) with DA_PL_HIGH and the pressing of buttons on the phone (Pow and Vol- holding it all the time). There was no BROM Error anymore and it all worked out.
All i can say don't give up, i have been at this point since beginning of December and now i finally got it unbricked! as much BROM errors u get, don't lose patience, keep on doing... u will finally find the right timing by happenstanc and it will work. The part after it is not that problematic then.
Check this thread, its very active at the moment and imo very very helpful: https://forum.xda-developers.com/le-2/help/bricked-le-s3-x626-flashing-twrp-power-t3715937/page5
Read the last pages...
leeco s3 x626 bricked
i also have the same problem with 4gb-32gb from the first day . Bricked after "fastboot reboot" command.
I tried to repair with flash_tools.exe but without success. I also tried various drivers.
Hello.
If anyone can help me... LeEco X625, blocked on red led, not charging, not connecting on PC, just red led when connect.
NOT seen in device manager.
jonyx87 said:
Hello.
If anyone can help me... LeEco X625, blocked on red led, not charging, not connecting on PC, just red led when connect.
NOT seen in device manager.
Click to expand...
Click to collapse
Same problem with mine. I once hard bricked mine, but whenever i connect to PC it gives sound, i was able to restore the phone @Long run. Few weeks after, i went to charge the phone and the phone went off, ever since then, not charging, no signs nor sounds when connected to PC... Took it to Engineers and all they say is dat i need to change the board... I'm so sad because i used all the money in my account to get the phone. The phone is still enjoying inside my wardrobe