Related
Hi! I tried to downgrade my P8 Lite (DUAL) from ALE-L21C432B574 firmware (West European), Android 6.0 and emui 4.0, to Android 5.1, emui 3.1.
The downgrade failed and after restart, the device have emui 4, android 6.0 but firmware ALE-L21C432B132 that, normally, is for android 5 and emui 3.1. Now, as result (I think this is the reason), I cant to update neither downgrade, in any way my device: I'm stuck in this situation ...
Any idea about how can I do to solve?
Thanks in advance for any advice.
No one can help??? I'm desperate :crying::crying::crying:
milt983 said:
Hi! I tried to downgrade my P8 Lite (DUAL) from ALE-L21C432B574 firmware (West European), Android 6.0 and emui 4.0, to Android 5.1, emui 3.1.
The downgrade failed and after restart, the device have emui 4, android 6.0 but firmware ALE-L21C432B132 that, normally, is for android 5 and emui 3.1. Now, as result (I think this is the reason), I cant to update neither downgrade, in any way my device: I'm stuck in this situation ...
Any idea about how can I do to solve?
Thanks in advance for any advice.
No one can help??? I'm desperate :crying::crying::crying:
Click to expand...
Click to collapse
From stock recovery wipe data factory reset and wipe cache(this will delete all data from phone,so make a backup before),putt phone in fastboot/rescue mod an flash again b132,reboot phone,now use this vendor (extract and rename folder to dload,copy to memory phone and make local update),when is done,use this ota update (extract,and putt update.zip in folder dload and make local update),now your phone should have build number Ale-L21C432B170,and for android 6.0 just make a local update with this
cristi.blidariu said:
From stock recovery wipe data factory reset and wipe cache(this will delete all data from phone,so make a backup before),putt phone in fastboot/rescue mod an flash again b132,reboot phone,now use this vendor (extract and rename folder to dload,copy to memory phone and make local update),when is done,use this ota update (extract,and putt update.zip in folder dload and make local update),now your phone should have build number Ale-L21C432B170,and for android 6.0 just make a local update with this
Click to expand...
Click to collapse
Many thanks for your guide! I will apply your advices and will report the result.
Also, I would like to ask something that makes me worry a little, why the Nandroid restore has not restored everything exactly as before?
milt983 said:
Many thanks for your guide! I will apply your advices and will report the result.
Also, I would like to ask something that makes me worry a little, why the Nandroid restore has not restored everything exactly as before?
Click to expand...
Click to collapse
Before restore,wipe all,then restore your backup
cristi.blidariu said:
... putt phone in fastboot/rescue mod an flash again b132 ...
Click to expand...
Click to collapse
At this point, what B132 I have to flash? I have this: ALE-L21 C432B132 Europe channel Dual but inside is the update.app (in dload folder). I presume that you mean a zip file, maybe a OTA?
milt983 said:
At this point, what B132 I have to flash? I have this: ALE-L21 C432B132 Europe channel Dual but inside is the update.app (in dload folder). I presume that you mean a zip file, maybe a OTA?
Click to expand...
Click to collapse
You must extract from update.app using huawei update extractor and extract files:boot,recovery,cust and systems then flash by using fastboot commands
cristi.blidariu said:
You must extract from update.app using huawei update extractor and extract files:boot,recovery,cust and systems then flash by using fastboot commands
Click to expand...
Click to collapse
I wiped the system and cache from stock recovery, extract the files from update.app, flash them in fastboot&rescue mode and reboot, but the device stops at the boot loop...
milt983 said:
I wiped the system and cache from stock recovery, extract the files from update.app, flash them in fastboot&rescue mode and reboot, but the device stops at the boot loop...
Click to expand...
Click to collapse
Try again,and If is not work,then try with Ale-l21C432B170,flash files with fastboot
cristi.blidariu said:
Try again,and If is not work,then try with Ale-l21C432B170,flash files with fastboot
Click to expand...
Click to collapse
Ok, I will. Thanks
Let me ask you something, please: for downgrade from android 6.0 to 5.0, do you know if can I use the transition firmware ALE-L21C900B500 (I will start from ALE-L21C432B574)?
milt983 said:
Ok, I will. Thanks
Let me ask you something, please: for downgrade from android 6.0 to 5.0, do you know if can I use the transition firmware ALE-L21C900B500 (I will start from ALE-L21C432B574)?
Click to expand...
Click to collapse
you can give a try,that is a rollback package created by huawei so it might work
cristi.blidariu said:
you can give a try,that is a rollback package created by huawei so it might work
Click to expand...
Click to collapse
Ok, I did the downgrade with the Huawei official procedure . Many thanks for the help.
**Disclaimer-I won't be responsible if you BRICK your MATE 9.Proceed with own RISK,make sure you know what you are doing**
Mate 9
Andriod 8.0 to Andriod 7.0
1.unlock+flash twrp oreo
2.rebrand to china ,you deviece will be lock again
3.boot to eRecovery for download firmware cn via wifi but also it failed.
4.dload cn from otg (device theme error)
5.hwota any brand
----------------------------------------------------------------------------------------------------------------------
File
Dload Cn B213[ MHA-AL00B_C00B213_Firmware_China_Nonspecific_Android+7.0_EMUI5.0.zip]
https://drive.google.com/open?id=0BxrQz6OBtBICTDRBSTFKQ3JQOWs
Oeminfo Al00 : https://www.mediafire.com/download/37n3jqv23j6erq5
----------
New method for rollback Mate 9 (no root,no unlock)
You can use hisuite update mode for rollback from andriod 8.0 to 7.0
Just to clarify 2: You need to rebrand to AL00C00. C636 won't work, it fails at 32%.
Use this to get AL00C00 dload and oeminfo https://forum.xda-developers.com/mate-9/how-to/guide-rebrand-chinese-al00-mate9-to-t3554656
ante0 said:
Just to clarify 2: You need to rebrand to AL00C00. C636 won't work, it fails at 32%.
Use this to get AL00C00 dload and oeminfo https://forum.xda-developers.com/mate-9/how-to/guide-rebrand-chinese-al00-mate9-to-t3554656
Click to expand...
Click to collapse
Yes,rebrand to china is work.
newyesor said:
Yes,rebrand to china is work.
Click to expand...
Click to collapse
I found out the hard way. lol
ante0 said:
I found out the hard way. lol
Click to expand...
Click to collapse
I am so sorry for answer slow .
Rolback to Nougat
newyesor said:
Yes,rebrand to china is work.
Click to expand...
Click to collapse
Hallo my friend. How can you do that? i'm tried to 2 days com back to Nougat by Oreo beta but i can't..... Whay whay whay i don't know...
i tried every method but i can't back to Nougat my Mate 9.
chineese versiyon dload begin the install but when it comes to %5 say Software install failed. İ am trying to ERecovery to. İ can do FunkyHuawei Dns method well. İ can download the packed but when is you go to upload then say again Software install failed...
İ don't know what can i do... Please help me..
Are you investigating rollback ROMs? Huawei posted them to HiCloud and they are available in FF. Do they work?
They can be installed via hwota only, cause they have online_update tag (no dload option).
5[Strogino] said:
Are you investigating rollback ROMs? Huawei posted them to HiCloud and they are available in FF. Do they work?
They can be installed via hwota only, cause they have online_update tag (no dload option).
Click to expand...
Click to collapse
They are not approved (yet anyway) so it's HWOTA only.
They should work. The "rollback" FH uses is just the B194 OTA, but it won't flash if you modified /system etc.
I'm trying to get a hold of mankindtw to create a patched recovery for Oreo.
erhandavran said:
Hallo my friend. How can you do that? i'm tried to 2 days com back to Nougat by Oreo beta but i can't..... Whay whay whay i don't know...
i tried every method but i can't back to Nougat my Mate 9.
chineese versiyon dload begin the install but when it comes to %5 say Software install failed. İ am trying to ERecovery to. İ can do FunkyHuawei Dns method well. İ can download the packed but when is you go to upload then say again Software install failed...
İ don't know what can i do... Please help me..
Click to expand...
Click to collapse
Follow op.
1. Unlock bootloader and flash TWRP for Oreo
2. Rebrand to AL00C00. Download dload b115 from here: https://mega.nz/#!88RmjJjA!gGmuc0gL-_sPHOQ0VAXZgTJ3lXmlRRmBqXIYNEyw9XY extract and copy dload folder to external sd.
I used al00 oeminfo from hwota (https://drive.google.com/open?id=0B2D9GdWntw69RXRTcHBKbV9SMWM) then flashed it manually in TWRP using terminal.
Copy MHA-AL00C00.bin to root of external sdcard.
cp /external_sd/MHA-AL00C00.bin /tmp/oeminfo.bin
dd if=/tmp/oeminfo.bin of=/dev/block/sdd5 bs=1048576
3. Now reboot to eRecovery and let it download firmware which will fail. (Not sure if this is really necessary)
4. Reboot using Vol up+vol down+power, wait for install to finish
5. Use this https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108 to rebrand back to your firmware.
erhandavran said:
Hallo my friend. How can you do that? i'm tried to 2 days com back to Nougat by Oreo beta but i can't..... Whay whay whay i don't know...
i tried every method but i can't back to Nougat my Mate 9.
chineese versiyon dload begin the install but when it comes to %5 say Software install failed. İ am trying to ERecovery to. İ can do FunkyHuawei Dns method well. İ can download the packed but when is you go to upload then say again Software install failed...
İ don't know what can i do... Please help me..
Click to expand...
Click to collapse
You can email funkyhuawei support for help using the downgrade version.
erhandavran said:
Hallo my friend. How can you do that? i'm tried to 2 days com back to Nougat by Oreo beta but i can't..... Whay whay whay i don't know...
i tried every method but i can't back to Nougat my Mate 9.
chineese versiyon dload begin the install but when it comes to %5 say Software install failed. İ am trying to ERecovery to. İ can do FunkyHuawei Dns method well. İ can download the packed but when is you go to upload then say again Software install failed...
İ don't know what can i do... Please help me..
Click to expand...
Click to collapse
You must to unlock device for flash twrp oreo via adb first step. >Boot to twrp recovery mode for restore oem china,Phone will be lock again.>Boot to eRecovery mode for download firmware china B135 on wifi(update failed)>You must to dload by press Volume up+Volume Down+ power together for boot to download mode.(When you device boot up theme error,you cand dload china again for fix it.>HWOTA to any brand.
I rolled back successfully with this guide. The Oreo's Wireless tethering is utterly buggy and useless for me. Thanks for the guide!
I have new method for rollback from andriod 8.0 to andriod 7.0 by use hisuite update mode(no root).
Please backup data before done it.
newyesor said:
I have new method for rollback from andriod 8.0 to andriod 7.0 by use hisuite restore mode(no root).
Please backup data before done it.
Click to expand...
Click to collapse
No need to rebrand or anything, right?
No need rebrand.(hisuite update mode)
newyesor said:
I have new method for rollback from andriod 8.0 to andriod 7.0 by use hisuite update mode(no root).
Please backup data before done it.
Click to expand...
Click to collapse
Simply updating by hisuite from the PC?
Enviado desde mi MHA-L29 mediante Tapatalk
Yes,you can rollback from pc.
Update mode Hisuite on pc.
Update mode (no root,no unlock)
confrim mate 9with oreo -8 lock boot can rollback to nougat-7 with hisuit sure sure
..........so glad......
Please,
If I install the oreo twrp and my mate9 does not start, I get brik, can I restore via hisuite?
Code:
Flash at own Risk-
Firmware Information –
Device – Huawei Mate 8
Model – NXT-L09/NXT-L29
Android Version – 7.0
EMUI Version – 5.0
Firmware – B582
Build Number – NXT-L09C432B582/NXT-L29C432B582
Region – Europe
Status – Official
Type – Full firmware image
What’s New – Changelog
1) Nougat update for Huawei Mate 8 NXT-L09C432B582
update.zip http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1889/g1755/v101158/f1/full/update.zip
update_full_NXT-L09_hw_eu.zip http://update.hicloud.com:8180/TDS/...l/NXT-L09_hw_eu/update_full_NXT-L09_hw_eu.zip
update_data_full_public.zip http://update.hicloud.com:8180/TDS/...58/f1/full/public/update_data_full_public.zip
2) Nougat update for European Mate 8 for NXT-L29C432B582
update.zip http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1889/g1755/v101156/f1/full/update.zip
update_full_NXT-L29_hw_eu.zip http://update.hicloud.com:8180/TDS/...l/NXT-L29_hw_eu/update_full_NXT-L29_hw_eu.zip
update_data_full_public.zip http://update.hicloud.com:8180/TDS/...56/f1/full/public/update_data_full_public.zip
guide for newbie https://romprovider.com/2017/11/b582-nougat-update-huawei-mate-8-europe/
Step by step guide with screenshots with https://goo.gl/Qx1fE4
beingteja.yt said:
Step by step guide with screenshots with https://goo.gl/Qx1fE4
Click to expand...
Click to collapse
go lost data if you install it that way?
letschky said:
go lost data if you install it that way?
Click to expand...
Click to collapse
It is optional. If you want to perform clean install then you can go to TWRP main menu, Click on Wipe and swipe to factory reset
Or you can totally skip this step.
But it is always better to take a backup of your data --> Here is the guide to backup your data
:good:
Yes i know,but the Mate8 is from my Wife,she kill me with losing Data,hehe,for me is always better a Full Wipe before i install a new Full Update on my Honor Note 8
i'm on L29c185b580 i've tried to install via twrp it says recovery error 7 ' is that because the c185 ??? and what if deleted the asserts from the rom will it work or i'll brick my phone help please
No its because its not a twrp zip , a
If it was it would have letters PV after the title. Must be done over firmware finder.
Yep,not working flash in Twrp.
With firmware finder works.
letschky said:
Yep,not working flash in Twrp.
With firmware finder works.
Click to expand...
Click to collapse
what??? check the first replies of the thread it's about flashing it via twrp??
and what is the point of downloading zip file is it even possible to flash with firmware finder??
Does anyone checked if there is any improvement in battery life with B582 ?
Megotedx said:
what??? check the first replies of the thread it's about flashing it via twrp??
and what is the point of downloading zip file is it even possible to flash with firmware finder??
Click to expand...
Click to collapse
Are you install B582 in Twrp?
No it does not work with ANY twrp , the thread is written by a ideot.
Yes,i have a Honor Note 8 and it's the same,since the last Nougat Update does not work to flash in Twrp.
Megotedx said:
i'm on L29c185b580 i've tried to install via twrp it says recovery error 7 ' is that because the c185 ??? and what if deleted the asserts from the rom will it work or i'll brick my phone help please
Click to expand...
Click to collapse
were you able to solve this? I am having the same problem.
i think in a few days this will become ota from huawei, right?
Absolutely. Usually it's 1-2 weeks from it's appearance on FF.
I have twisted mate 8 rom and I am interested in upgrading.. downloaded 580 but wasn't able to flash in using twrp .. read somewhere that I would need rom-pv file so downloaded 560-pv but have a question before flashing it.. will it make the phone full stock ?? I mean will it also remove twrp recovery and flash the original one ?
Update error 7
When I try to flash in TWRP the update.zip I get a 'error 7' notification. In the file is no assert code so what could cause the problem?
ghettobass said:
When I try to flash in TWRP the update.zip I get a 'error 7' notification. In the file is no assert code so what could cause the problem?
Click to expand...
Click to collapse
B582 does not work with Twrp
Hi, since i'm not confident with adb/fastboot commands, i'm asking help for restoring the original firmware and recovery in my MLA-L11.
I've downloaded the two files from Firmware Finder (i'm sure 100% they are the right one) but i don't know how to proceed. Anyone can help there? Thank you
GertFromTheWell said:
Hi, since i'm not confident with adb/fastboot commands, i'm asking help for restoring the original firmware and recovery in my MLA-L11.
I've downloaded the two files from Firmware Finder (i'm sure 100% they are the right one) but i don't know how to proceed. Anyone can help there? Thank you
Click to expand...
Click to collapse
Hey!
You have to go back to EMUI 4.1 by restoring a TWRP backup and then you will update to EMUI 5. Ive used the following process on my CAN-L11 and worked fine. It should work on all models. @virusdunil has followed the same process on his MLA-L03 and everything went fine.
Let me know if you experience some trouble during this process.
Go back to EMUI 4.1 (MM)
1) Download this TWRP backup of MM: https://forum.xda-developers.com/showpost.php?p=73003510&postcount=60.
2) You can put the backup to internal memory or sdcard, After you've chose where you wanna put it, take a backup of boot.img with TWRP to internal/sdcard (where you wanna put the backup), so you'll get a folder with this structure: TWRP > BACKUPS > FPFDU16A20001907 (you'll have different number I guess). Then you'll put the twrp backup folder (which you have downloaded) in that folder with numbers
3) Boot in TWRP, wipe system, data, cache, dalvik cache from twrp > wipe > advanced and then you restore the backup from TWRP > restore (restore only system + data + boot). Then you reboot and you're good to go.
Click to expand...
Click to collapse
Now update to EMUI 5 (N)
After youve downloaded the stock firmware using Firmware Finder, you should have two files:
- update.zip
- update_data_full_CAN-L11_hw_eu.zip (example)
Backup your internal memory as it will be wiped at step 8).
1) Extract update.zip. Then you get UPDATE.APP.
2) Download Huawei Update Extractor.
3) Open Huawei Update Extractor, choose UPDATE.APP from the folder where youve extracted it. Right click RECOVERY.img and extract it.
4) Now boot your phone in fastboot mode by pressing and holding the power and the volume down buttons at the same time.
5) Type in terminal / command prompt on PC to flash the stock recovery which youve extracted at step 3):
Code:
fastboot flash recovery recovery.img
.
6) Reboot.
7) Put update.APP in a folder called dload on your sdcard.
8) Dial *#*#2846579#*#* and choose Sofware Upgrade > SDCard Upgrade. Now EMUI 5 will be installed, bootloader gets relocked and internal memory gets wiped. Now wait about 5 mins (maximum 10 mins). If the phone isnt booting within that time, then boot the phone in stock recovery by pressing and holding power and volume up buttons and choose "Wipe data / factory reset" and then "Wipe cache partition". After you reboot, the phone should boot. Skip the setup wizard.
9) Remove update.APP from dload folder from your sdcard and extract the other zip (example update_data_full_CAN-L11_hw_eu.zip) and put all the files/folders extracted in dload folder.
10) Dial *#*#2846579#*#* and choose Sofware Upgrade > SDCard Upgrade.
11) You are done.
Click to expand...
Click to collapse
To fix the themes app on EMUI 5, you can check this thread.
PS: im sorry for the missing apostrophe, but im not used to add that from PC keyboard. In fact, i dont even know how to add it, i think i need to change keyboard settings (language).
#Henkate said:
Hey!
You have to go back to EMUI 4.1 by restoring a TWRP backup and then you will update to EMUI 5. Ive used the following process on my CAN-L11 and worked fine. It should work on all models. @virusdunil has followed the same process on his MLA-L03 and everything went fine.
Let me know if you experience some trouble during this process.
Go back to EMUI 4.1 (MM)
Now update to EMUI 5 (N)
.
6) Reboot.
7) Put update.zip in a folder called dload on your sdcard.
8) Dial *#*#2846579#*#* and choose Sofware Upgrade > SDCard Upgrade. Now EMUI 5 will be installed, bootloader gets relocked and internal memory gets wiped. Now wait about 5 mins (maximum 10 mins). If the phone isnt booting within that time, then boot the phone in stock recovery by pressing and holding power and volume up buttons and choose "Wipe data / factory reset" and then "Wipe cache partition". After you reboot, the phone should boot. Skip the setup wizard.
9) Remove update.zip from dload folder from your sdcard and place the other zip there (example update_data_full_CAN-L11_hw_eu.zip.
10) Dial *#*#2846579#*#* and choose Sofware Upgrade > SDCard Upgrade.
11) You are done.
To fix the themes app on EMUI 5, you can check this thread.
PS: im sorry for the missing apostrophe, but im not used to add that from PC keyboard. In fact, i dont even know how to add it, i think i need to change keyboard settings (language).
Click to expand...
Click to collapse
Love you, i'll try ASAP.
#Henkate said:
Hey!
You have to go back to EMUI 4.1 by restoring a TWRP backup and then you will update to EMUI 5. Ive used the following process on my CAN-L11 and worked fine. It should work on all models. @virusdunil has followed the same process on his MLA-L03 and everything went fine.
Let me know if you experience some trouble during this process.
Go back to EMUI 4.1 (MM)
Now update to EMUI 5 (N)
To fix the themes app on EMUI 5, you can check this thread.
PS: im sorry for the missing apostrophe, but im not used to add that from PC keyboard. In fact, i dont even know how to add it, i think i need to change keyboard settings (language).
Click to expand...
Click to collapse
Hi robert, i succesfully downgraded to MM and restored (i guess) stock recovery. But when I try to upgrade to nougat via sdcard upgrade the phone can't find the update.zip file.
Maybe the problem is my phone believe he is a CAN instead of a MLA, and don't recognize a MLA update.zip file?
If that is the case, you need to use the firmware extractor and "fastboot flash system system.img" to get your build.prop back. That would get your device to recognize as what it is.
wangdaning said:
If that is the case, you need to use the firmware extractor and "fastboot flash system system.img" to get your build.prop back. That would get your device to recognize as what it is.
Click to expand...
Click to collapse
I found the issue, I had to unzip the update.zip tp UPDATE.app file in dload folder. The phone got bootloop at first flash, but wiping all solved the problem. Now i'm back to stock with proper build number, thanks @wangdang and @#Henkate for your support :victory:
GertFromTheWell said:
Hi robert, i succesfully downgraded to MM and restored (i guess) stock recovery. But when I try to upgrade to nougat via sdcard upgrade the phone can't find the update.zip file.
Maybe the problem is my phone believe he is a CAN instead of a MLA, and don't recognize a MLA update.zip file?
Click to expand...
Click to collapse
GertFromTheWell said:
I found the issue, I had to unzip the update.zip tp UPDATE.app file in dload folder. The phone got bootloop at first flash, but wiping all solved the problem. Now i'm back to stock with proper build number, thanks @wangdang and @#Henkate for your support :victory:
Click to expand...
Click to collapse
I'm sorry, it looks like I've wrote update.zip instead update.APP and also at step 9). It was my fault .
I've updated the steps 7 and 9. Thank you!
#Henkate said:
Hey!
You have to go back to EMUI 4.1 by restoring a TWRP backup and then you will update to EMUI 5. Ive used the following process on my CAN-L11 and worked fine. It should work on all models. @virusdunil has followed the same process on his MLA-L03 and everything went fine.
Let me know if you experience some trouble during this process.
Go back to EMUI 4.1 (MM)
Now update to EMUI 5 (N)
To fix the themes app on EMUI 5, you can check this thread.
PS: im sorry for the missing apostrophe, but im not used to add that from PC keyboard. In fact, i dont even know how to add it, i think i need to change keyboard settings (language).
Click to expand...
Click to collapse
Can you please give me the backup of cust.img and product? or cust.img file and product? because when i try to restore twrp backup or 4.1
Failed to mount /product (invalid argument).
Failed to mount /cust (invalid argument). Got this error
and my phone stuck on unlocked bootloader option.
1: click power button to continues
2 click vol Up for Erecovery
3: will be boot into 5 seconds etc and when i click power button phone reboot and again these options
abuapka said:
Can you please give me the backup of cust.img and product? or cust.img file and product? because when i try to restore twrp backup or 4.1
Failed to mount /product (invalid argument).
Failed to mount /cust (invalid argument). Got this error
and my phone stuck on unlocked bootloader option.
1: click power button to continues
2 click vol Up for Erecovery
3: will be boot into 5 seconds etc and when i click power button phone reboot and again these options
Click to expand...
Click to collapse
Cust: https://www.mediafire.com/file/oncwuuob84ubisy/cust_backup.zip
Product: http://www.mediafire.com/file/el054rk7a6tuya2/product_backup.zip
The backups are from N partitions.
#Henkate said:
Cust: https://www.mediafire.com/file/oncwuuob84ubisy/cust_backup.zip
Product: http://www.mediafire.com/file/el054rk7a6tuya2/product_backup.zip
The backups are from N partitions.
Click to expand...
Click to collapse
N partitions? Nougat ?
abuapka said:
N partitions? Nougat ?
Click to expand...
Click to collapse
Yes.
#Henkate said:
Yes.
Click to expand...
Click to collapse
THanks Bro.
Thanku so Much
Got My Phone back to stock 4.1 but its CAN
Before It was MLa-l11 By the way thanku so much
You sure you flashed stock MLA firmware?
no
wangdaning said:
You sure you flashed stock MLA firmware?
Click to expand...
Click to collapse
i didnt flash stock mla firmware i jus5 flashed 4.1 twrp backup
#Henkate said:
Hey!
You have to go back to EMUI 4.1 by restoring a TWRP backup and then you will update to EMUI 5. Ive used the following process on my CAN-L11 and worked fine. It should work on all models. @virusdunil has followed the same process on his MLA-L03 and everything went fine.
Let me know if you experience some trouble during this process.
Go back to EMUI 4.1 (MM)
Now update to EMUI 5 (N)
To fix the themes app on EMUI 5, you can check this thread.
PS: im sorry for the missing apostrophe, but im not used to add that from PC keyboard. In fact, i dont even know how to add it, i think i need to change keyboard settings (language).
Click to expand...
Click to collapse
hey how are you hope you fine
my mobile NOVA PLUS MLA11
i just bricked it and unbricked it by your method ( RESTORE TWRP BACKUP ) https://forum.xda-developers.com/nov...tboot-t3708585
now iam tring to get the correct firmware from huwaei finder but idont know wchich the correct one
because idont know my model (MLA-L11C"?????") idont know if it c185 or c432 !!
itried installlast one from c185 but it faild on 5%
thankss
Echtar said:
hey how are you hope you fine
my mobile NOVA PLUS MLA11
i just bricked it and unbricked it by your method ( RESTORE TWRP BACKUP ) https://forum.xda-developers.com/nov...tboot-t3708585
now iam tring to get the correct firmware from huwaei finder but idont know wchich the correct one
because idont know my model (MLA-L11C"?????") idont know if it c185 or c432 !!
itried installlast one from c185 but it faild on 5%
thankss
Click to expand...
Click to collapse
Hey!
I've got your PM, but I see that meanwhile you've posted here and you made a new thread too... You don't have to make so many posts, a post or a thread is enough to get the attention of someone.
In your case, the phone model is MLA-L11 and C185/C432 is the build number as far as I remember. You can check the build number in Settings > About phone. I don't know if there's any other way to check, if you're on other build number now and you don't know which one was yours.
#Henkate said:
Hey!
I've got your PM, but I see that meanwhile you've posted here and you made a new thread too... You don't have to make so many posts, a post or a thread is enough to get the attention of someone.
In your case, the phone model is MLA-L11 and C185/C432 is the build number as far as I remember. You can check the build number in Settings > About phone. I don't know if there's any other way to check if you're on other build number now and you don't know which one was yours.
Click to expand...
Click to collapse
iam on nrd90m test-keys
Echtar said:
iam on nrd90m test-keys
Click to expand...
Click to collapse
Post a screenshot of Settings > About phone as I don't really remember how it looks there.
Hi
I've managed to backup EMUI 4.1, however I'm getting error message "software install failed" trying to update EMUI to 5.0 (pops up, every time when it reach 5% progress).
Any idea how to fix it?
best regards
#Henkate said:
Now update to EMUI 5 (N)
Click to expand...
Click to collapse
Steps #9 and #10 do not work for me ("Software install failed"). But I wonder if they are necessary after all, because Product Id, IMEI, Build-number (and of course EMUI-Version and Android-Version) are stock again.
And isn't "update_full_CAN-L01_hw_eu.zip" supposed to be included in the "update.zip"-file? I thougt "update.zip" allready delivers every part of the ROM.
hi everyone
i have p9 lite l31 with emui 4.1.1 and mm
i can't update it to nougat can anyone tell me how ? i tried with dload and twrp and still can't
pls if u have full method tell me or give me link
ps : bootloader unlocked
rrr8 said:
hi everyone
i have p9 lite l31 with emui 4.1.1 and mm
i can't update it to nougat can anyone tell me how ? i tried with dload and twrp and still can't
pls if u have full method tell me or give me link
ps : bootloader unlocked
Click to expand...
Click to collapse
Hello,
what is your complete firmware ?
EX. VNS-L31C432B160
EX. VNS-L31C185B151
EX. VNS-L31C636B170
Having this info you can use Firmware Finder app
and upgrade to Emui 5, android 7.
I can help you doing this...
Cheers
Dadditz said:
Hello,
what is your complete firmware ?
EX. VNS-L31C432B160
EX. VNS-L31C185B151
EX. VNS-L31C636B170
Having this info you can use Firmware Finder app
and upgrade to Emui 5, android 7.
I can help you doing this...
Cheers
Click to expand...
Click to collapse
hi, thank you for your help
my complete firmware is VNS-L31C432B160
can you figure out how to update ?
rrr8 said:
hi, thank you for your help
my complete firmware is VNS-L31C432B160
can you figure out how to update ?
Click to expand...
Click to collapse
If you have TWRP on board, download two files from link, copy it to the SD card. Reboot in TWRP, flash first file update.zip , go back to the TWRP main menu and flash second file hw_eu.zip . Reboot system and do factory reset from Stock recovery .
Links (VNS-L31C432B370):
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v80460/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...-L31_hw_eu/update_data_full_VNS-L31_hw_eu.zip
thank you,
yes i have twrp but i don't know if it's the right version to install this rom
i'll try this asap and tell you about the result
rrr8 said:
thank you,
yes i have twrp but i don't know if it's the right version to install this rom
i'll try this asap and tell you about the result
Click to expand...
Click to collapse
Use this TWRP:
https://mega.nz/#!MsNXRCgI!4ZQW2ebrN-cvO21J9lJ2qz3UYwcE3onMFZzRMcdRY9o
TWRP for Nougat:
https://mega.nz/#!EsESQQhK!uc_lfXEfDW6U7Lq2VeNOYq5OWUID0G-YyhK-oUL4deU
It's recommended to install TWRP over the huawei eRecovery with the command
fastboot flash recovery2 twrp.img
bozka1 said:
Use this TWRP:
https://mega.nz/#!MsNXRCgI!4ZQW2ebrN-cvO21J9lJ2qz3UYwcE3onMFZzRMcdRY9o
TWRP for Nougat:
https://mega.nz/#!EsESQQhK!uc_lfXEfDW6U7Lq2VeNOYq5OWUID0G-YyhK-oUL4deU
It's recommended to install TWRP over the huawei eRecovery with the command
fastboot flash recovery2 twrp.img
Click to expand...
Click to collapse
thank you for all your help, sry for the late tho.
i'll try this TWRP and inform you about the result.
btw, if i flash it as recovery2, how can i boot it ?
rrr8 said:
thank you for all your help, sry for the late tho.
i'll try this TWRP and inform you about the result.
btw, if i flash it as recovery2, how can i boot it ?
Click to expand...
Click to collapse
I automatically wrote 'recovery2', but in this case it doesn't matter, the new FW will overwrite TWRP.
I apologize for the unnecessary complication .
(Why recovery2 ? eRecovery is basically useless on this phone. It's useful flash TWRP over it by having stock recovery as 'recovery' and TWRP as 'eRecovery' (recovery2).
Among other things, you can have access to official OTA updates yet still being able to do everything you could do with TWRP etc. etc.
It makes things easier
How to boot it:
reboot your phone, as soon as the "yellow warning" appears on the screen, hold down the Volume Up for 3 seconds, phone will boot in TWRP.)
bozka1 said:
I automatically wrote 'recovery2', but in this case it doesn't matter, the new FW will overwrite TWRP.
I apologize for the unnecessary complication .
(Why recovery2 ? eRecovery is basically useless on this phone. It's useful flash TWRP over it by having stock recovery as 'recovery' and TWRP as 'eRecovery' (recovery2).
Among other things, you can have access to official OTA updates yet still being able to do everything you could do with TWRP etc. etc.
It makes things easier
How to boot it:
reboot your phone, as soon as the "yellow warning" appears on the screen, hold down the Volume Up for 3 seconds, phone will boot in TWRP.)
Click to expand...
Click to collapse
thank you for all this, i'll try your method and hope it will work
rrr8 said:
hi, thank you for your help
my complete firmware is VNS-L31C432B160
can you figure out how to update ?
Click to expand...
Click to collapse
Dude,
i was replying to you suggesting to use Firmware Finder
in order to upgrade to android 7,
but i assume you will reach the same using @bozka1 guide.
Enjoy the community and good luck..
Cheers
bozka1 said:
If you have TWRP on board, download two files from link, copy it to the SD card. Reboot in TWRP, flash first file update.zip , go back to the TWRP main menu and flash second file hw_eu.zip . Reboot system and do factory reset from Stock recovery .
Links (VNS-L31C432B370):
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v80460/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...-L31_hw_eu/update_data_full_VNS-L31_hw_eu.zip
Click to expand...
Click to collapse
thanks, you saved my life, it worked !!
I successfully installed android 7 with emui 5 in my device, ty