Database Users

Upgrade to 5.1 beta?

Hello Everyone, I have ALE-L21 and my current firmware is C185B130 (apparently C185 is UAE region but i live in pakistan). Device is bootloader unlocked, rooted with TWRP installed.
I have a TWRP backup of current rom. I wanna try the 5.1 beta released for Europe but it says here ( http://forum.xda-developers.com/p8lite/general/beta-firmware-p8-lite-ale-l21-c432b008-t3243228 ) that i need C432B132 to upgrade to this. So I downloaded this firmware(C432B132) from Huawei website. There were two folders in it, dload and CUSTOM(not sure what that for). I extracted system.img, recovery.img, CUST.img, boot.img from UPDATE.APP given in the dload folder. So here is what i'm thinking.
1) Flashing the extracted system.img, recovery.img, CUST.img, boot.img would get me to C432B132?
2) After i install B132 can I upgrade to 5.1 using EMUI local update?
3) If something goes wrong, can I just flash TWRP and restore the backup?
-
Or this whole idea is foolish and i would screw up my phone after flashing system, cust and boot of some other firmware designed for some other region???

SobanAmin said:
Hello Everyone, I have ALE-L21 and my current firmware is C185B130 (apparently C185 is UAE region but i live in pakistan). Device is bootloader unlocked, rooted with TWRP installed.
I have a TWRP backup of current rom. I wanna try the 5.1 beta released for Europe but it says here ( http://forum.xda-developers.com/p8lite/general/beta-firmware-p8-lite-ale-l21-c432b008-t3243228 ) that i need C432B132 to upgrade to this. So I downloaded this firmware(C432B132) from Huawei website. There were two folders in it, dload and CUSTOM(not sure what that for). I extracted system.img, recovery.img, CUST.img, boot.img from UPDATE.APP given in the dload folder. So here is what i'm thinking.
1) Flashing the extracted system.img, recovery.img, CUST.img, boot.img would get me to C432B132?
2) After i install B132 can I upgrade to 5.1 using EMUI local update?
3) If something goes wrong, can I just flash TWRP and restore the backup?
-
Or this whole idea is foolish and i would screw up my phone after flashing system, cust and boot of some other firmware designed for some other region???
Click to expand...
Click to collapse
No this is wrong
1. You need to downgrade to B052
2. Install B136a
3. Install B008(Android 5.1.1)
After each install is recommended to make wipe

Thanks
sokkoban said:
No this is wrong
1. You need to downgrade to B052
2. Install B136a
3. Install B008(Android 5.1.1)
After each install is recommended to make wipe
Click to expand...
Click to collapse
I dont think that you need to go all the way to B052 and then flash the required version
This is what i did:
1) Flashed 132 cust, recovery, boot, system. My build number changed to something like balong ( I dont remember exactly :silly: ).
2) I flashed the UPDATE.APP file that was in the CUSTOM folder (that came with B132 rar file) via EMUI and it restored my build to B132.
3) Tried updating to 5.1 via EMUI but failed.
4) To give it a last try, I downloaded and flashed my phone with CUST, recovery, system, boot.img of B136a and then the update worked. My phone is now 5.1.1 B006
Thanks for the reply mate :good:

Confirmation ?
sobanamin said:
i dont think that you need to go all the way to b052 and then flash the required version
this is what i did:
1) flashed 132 cust, recovery, boot, system. My build number changed to something like balong ( i dont remember exactly :silly: ).
2) i flashed the update.app file that was in the custom folder (that came with b132 rar file) via emui and it restored my build to b132.
3) tried updating to 5.1 via emui but failed.
4) to give it a last try, i downloaded and flashed my phone with cust, recovery, system, boot.img of b136a and then the update worked. My phone is now 5.1.1 b006 :d
thanks for the reply mate :good:
Click to expand...
Click to collapse
i also have p8 lite c185b130 is this confirmly working ?

wahaj0892 said:
i also have p8 lite c185b130 is this confirmly working ?
Click to expand...
Click to collapse
yeah its working fine. I think the battery life has improved a little bit or maybe it is just because i haven't installed much apps after flashing this rom compared to when I was using the B130. The only thing i miss from B130 is that small 2g, 3g written on the signal bars. This one only shows the 2g or 3g network type when the mobile data is turned on. Huawei cloud is also not present in it so you may wanna backup your contacts and stuff

SobanAmin said:
yeah its working fine. I think the battery life has improved a little bit or maybe it is just because i haven't installed much apps after flashing this rom compared to when I was using the B130. The only thing i miss from B130 is that small 2g, 3g written on the signal bars. This one only shows the 2g or 3g network type when the mobile data is turned on. Huawei cloud is also not present in it so you may wanna backup your contacts and stuff
Click to expand...
Click to collapse
thanks for the reply ...
some more question do i need a unlock bootloader ?
secondly i have a wired problem while typing my phone has a double tap issue is that gone ?

Hello,
Double tap issue still present in beta

sokkoban said:
Hello,
Double tap issue still present in beta
Click to expand...
Click to collapse
I dont use it often so I cant tell for sure

please im on b130 (5.0.1)
can you tell me (step by step) how can i get (5.1.1) my (bootloader unlocked with stovk recovery) please please

mimoriich said:
please im on b130 (5.0.1)
can you tell me (step by step) how can i get (5.1.1) my (bootloader unlocked with stovk recovery) please please
Click to expand...
Click to collapse
Hello,
Read this post, will help you http://forum.xda-developers.com/showpost.php?p=63993458&postcount=3

sokkoban said:
Hello,
Read this post, will help you http://forum.xda-developers.com/showpost.php?p=63993458&postcount=3
Click to expand...
Click to collapse
please tell me how u flash it i putted dload file to sd card & i reeboted (home + vol down + vol up ) its said error

SobanAmin said:
I dont think that you need to go all the way to B052 and then flash the required version
This is what i did:
1) Flashed 132 cust, recovery, boot, system. My build number changed to something like balong ( I dont remember exactly :silly: ).
2) I flashed the UPDATE.APP file that was in the CUSTOM folder (that came with B132 rar file) via EMUI and it restored my build to B132.
3) Tried updating to 5.1 via EMUI but failed.
4) To give it a last try, I downloaded and flashed my phone with CUST, recovery, system, boot.img of B136a and then the update worked. My phone is now 5.1.1 B006
Thanks for the reply mate :good:
Click to expand...
Click to collapse
Can I apply this process for my ALE-L21C636B150...?

mimoriich said:
please tell me how u flash it i putted dload file to sd card & i reeboted (home + vol down + vol up ) its said error
Click to expand...
Click to collapse
If you are in stock recovery and have B132 try to put dload folder in internal memory and use software updater
Rifat Nurr said:
Can I apply this process for my ALE-L21C636B150...?
Click to expand...
Click to collapse
No, you can't. This beta is only for B136a(may be work also in B132)

sokkoban said:
Hello,
Double tap issue still present in beta
Click to expand...
Click to collapse
what about b170 ??

SobanAmin said:
I dont think that you need to go all the way to B052 and then flash the required version
This is what i did:
1) Flashed 132 cust, recovery, boot, system. My build number changed to something like balong ( I dont remember exactly :silly: ).
2) I flashed the UPDATE.APP file that was in the CUSTOM folder (that came with B132 rar file) via EMUI and it restored my build to B132.
3) Tried updating to 5.1 via EMUI but failed.
4) To give it a last try, I downloaded and flashed my phone with CUST, recovery, system, boot.img of B136a and then the update worked. My phone is now 5.1.1 B006
Thanks for the reply mate :good:
Click to expand...
Click to collapse
can i flash c136a direcly over c185b130

MAYBE
wahaj0892 said:
can i flash c136a direcly over c185b130
Click to expand...
Click to collapse
Give It a try. If i doesn't work then you can just flash 132->136 and then apply update. But there maybe some problem with the version number changing to "BALONG". I faced this problem when I flashed 132 over my 130 but then I applied UPDATE.APP file(the small file in the custom folder) via EMUI Updater and it fixed the version number. But the 136a rom did not had any UPDATE.APP in custom folder so I dont know what to do if you get a version number problem. You can try flashing the 5.1 update via EMUI and maybe it will fix the version number problem (if it happened in the first place) or you can always goto 132->136 and apply 5.1

wahaj0892 said:
thanks for the reply ...
some more question do i need a unlock bootloader ?
secondly i have a wired problem while typing my phone has a double tap issue is that gone ?
Click to expand...
Click to collapse
yes you need to unlock the boot loader. What exactly do you mean by double tap issue? are you talking about the double tap to wake feature not working sometimes? Yes the DoubletapToWake dont works sometime which can be very annoying so I just disabled that feature and using the power button ever since. As for the typing issue, No I'm not facing any typing issues, never did on the B130 and not on this 5.1 version. Try using someother keyboard app?

SobanAmin said:
yes you need to unlock the boot loader. What exactly do you mean by double tap issue? are you talking about the double tap to wake feature not working sometimes? Yes the DoubletapToWake dont works sometime which can be very annoying so I just disabled that feature and using the power button ever since. As for the typing issue, No I'm not facing any typing issues, never did on the B130 and not on this 5.1 version. Try using someother keyboard app?
Click to expand...
Click to collapse
it is related to typing .. fast typing cause this issue .. i tired many apps nothing fix the issue

wahaj0892 said:
can i flash c136a direcly over c185b130
Click to expand...
Click to collapse
I tried to install b132 and b136a on my c185b130 but it failed both times.
---------- Post added at 06:27 PM ---------- Previous post was at 06:22 PM ----------
SobanAmin said:
Give It a try. If i doesn't work then you can just flash 132->136 and then apply update. But there maybe some problem with the version number changing to "BALONG". I faced this problem when I flashed 132 over my 130 but then I applied UPDATE.APP file(the small file in the custom folder) via EMUI Updater and it fixed the version number. But the 136a rom did not had any UPDATE.APP in custom folder so I dont know what to do if you get a version number problem. You can try flashing the 5.1 update via EMUI and maybe it will fix the version number problem (if it happened in the first place) or you can always goto 132->136 and apply 5.1
Click to expand...
Click to collapse
I have c185b130, there is c185b131 update on consumer.huawei.com for UAE region uploaded on 31-12-2015, will it work on my device? What are the changes in c185b130 and c185b131?

EMUI 4.0 Android 6.0.1 KIW-L21 C185 (Middle East Version)

Warning : I am not responsable for any bricked devices, dead sd cards, or other issues, I just wanted to share this, because I know, there are many Honor 5x KIW-L21 C185 users, and this, in my case, worked.
Warning :
***This will turn your device into a single sim phone.***
This WILL CHANGE your CUST version to 432.
Because I couldn't wait anymore for the official MM update from Huawei. I managed to install EMUI 4.0 Android 6.0.1 on my KIW-L21 C185, Middle East Version following this steps here: http://forum.xda-developers.com/showpost.php?p=67851428&postcount=2 .
1. You need to install TWRP, obviously . http://forum.xda-developers.com/devdb/project/dl/?id=19454
2. Download mm-update from here http://forum.xda-developers.com/devdb/project/dl/?id=19446 and extract files, you should be seeing 2 image files : TZ.img and MODEM.img .
3. Download and install Huawei Update Extractor http://forum.xda-developers.com/showthread.php?t=2433454 .
4. In my case, I downloaded this firmware here http://download-c.huawei.com/download/downloadCenter?downloadId=84663&version=327467 .
5. Now, using the Huawei Update Extractor, open the downloaded firmware and extract BOOT.img , CUST.img , SYSTEM.img on your computer.
6. Reboot phone in recovery mode and make a full TWRP backup.
7.Wipe data/factory reset and then wipe system, Data, Cache, Cust, Dalvik/Art Cache.
8. Install, and in the bottom of the screen, choose install image as following:
I. BOOT.img install to Boot.
II. CUST.img install to cust_image.
III. SYSTEM.img install to system_image.
IV. TZ.img install to tz_image.
V. MODEM.img install to modem_image.
9. After installing all of the above files, just reboot and there it is.
Untill now, I haven't found any bugs or issues, except that in the 'About Phone' panel at Model Number it doesn't say anymore KIW-L21 , but says 'MSM8916 for arm64'.

Screenshots

Is it stable and all options working
Sent from my KIW-L21 using Tapatalk

kevoxy said:
Is it stable and all options working
Click to expand...
Click to collapse
So it seems, in my case,everything is working, no FC's , camera working fine in professional mode, extends battery life.
Only thing I didn't try is going back to stock C185 Rom.
Also,didn't try flashing others rom,because I really like how it's working on EMUI 4.0

hi boro Im flash this rom in honor 5x kiw-l21c185b140 everything good just rom one sim card not dual sim???

mammadpsy said:
hi boro Im flash this rom in honor 5x kiw-l21c185b140 everything good just rom one sim card not dual sim???
Click to expand...
Click to collapse
Never tried using dual sim mod,as I only use one sim, that I didn't check.

cosminvr27 said:
Warning : I am not responsable for any bricked devices'.
Click to expand...
Click to collapse
Hi, i flashed cm13 and i wanna do flash for this build because of change tz number to get newer builds of cm.
Is it work on cm 13 or i must have stock rom before doing flash, accidentally i removed my stock rom i think, and twrp backup didn't restored my previous rom.
Pls help. Tnx.
Sent from my KIW-L21 using XDA-Developers mobile app

najafi.ali.68 said:
Hi, i flashed cm13 and i wanna do flash for this build because of change tz number to get newer builds of cm.
Is it work on cm 13 or i must have stock rom before doing flash, accidentally i removed my stock rom i think, and twrp backup didn't restored my previous rom.
Pls help. Tnx.
Click to expand...
Click to collapse
I'm not sure, I would try going back to stock rom first , as I not know how would it affect flashing over CM. Try to revert to stock first , than do update,than flash CM again.

cosminvr27 said:
I'm not sure, I would try going back to stock rom first , as I not know how would it affect flashing over CM. Try to revert to stock first , than do update,than flash CM again.
Click to expand...
Click to collapse
You're right, I'll do that, but i didn't get back tu stock rom in my life, if i wanna do that how? Its like flashing cm? I didn't find KIW-L21 C185 VERSION stock rom for download anywhere, i don't know why.
Thanks again for your help ?
Sent from my KIW-L21 using XDA-Developers mobile app

najafi.ali.68 said:
You're right, I'll do that, but i didn't get back tu stock rom in my life, if i wanna do that how? Its like flashing cm? I didn't find KIW-L21 C185 VERSION stock rom for download anywhere, i don't know why.
Thanks again for your help ?
Click to expand...
Click to collapse
Here it is
http://click.xda-developers.com/api...d 5.1_EMUI 3.1_C185B130_Kuwait_Channel-Others
You have to put it on the sd card in dload folder than hold volume - , volume + and power , and the rest does it by itself..also, after , make sure you update to b140 , as it will ask for it after you configure the phone.

Tried installing twrp but didn't boot
And in twrp 3-0-0 doesn't have option to flash images in cust or tz partitions

cosminvr27 said:
e.
8. Install, and in the bottom of the screen, choose install image as following:
I. BOOT.img install to Boot.
II. CUST.img install to cust_image.
III. SYSTEM.img install to system_image.
IV. TZ.img install to tz_image.
V. MODEM.img install to modem_image.
9. After installing all of the above files, just reboot and there it is.
Untill now, I haven't found any bugs or issues, except that in the 'About Phone' panel at Model Number it doesn't say anymore KIW-L21 , but says 'MSM8916 for arm64'.
Click to expand...
Click to collapse
Hi, when.i wanna flash cust.img its not a cust partition to flash on to it, what is wrong? Is sth with my phone or my twrp version (3.0.2.0)?

najafi.ali.68 said:
Hi, when.i wanna flash cust.img its not a cust partition to flash on to it, what is wrong? Is sth with my phone or my twrp version (3.0.2.0)?
Click to expand...
Click to collapse
What partitions do you see ?

cosminvr27 said:
What partitions do you see ?
Click to expand...
Click to collapse
Boot and recovery, it can be fixed?

najafi.ali.68 said:
Boot and recovery, it can be fixed?
Click to expand...
Click to collapse
But you did revert to stock , right ?

cosminvr27 said:
But you did revert to stock , right ?
Click to expand...
Click to collapse
Yes, i flashed cm build of 18july @crpalmer, for newer builds and FP i need mm base because of tz number, i revovered my twrp.backup to stock and when i want to do your steps i see this problem.
It could be because of version of twrp? I donno how to change twrp.
Thanks for your help.

najafi.ali.68 said:
Yes, i flashed cm build of 18july @crpalmer, for newer builds and FP i need mm base because of tz number, i revovered my twrp.backup to stock and when i want to do your steps i see this problem.
Thanks for your help.
Click to expand...
Click to collapse
Yes,but you got back to stock using the update.app or your recovery ? If You did recovery try force updating stock using the dload folder and the update.app.

cosminvr27 said:
Yes,but you got back to stock using the update.app or your recovery ? If You did recovery try force updating stock using the dload folder and the update.app.
Click to expand...
Click to collapse
I said that i got back to stock with twrp restore,that i think it means recovery you said and now
im on kiw-l21 c185.
I dont get that, you mean that i put stock rom in dload forder then what? Use local update in updater? It will work?
d

najafi.ali.68 said:
I said that i got back to stock to stock with twrp restore,that ithink.it means
recovery you said and now im on kiw-l21 c185
I dont get that, you mean that i put stock rom in dload forder then what? Use local update in updater? It will work?
d
Click to expand...
Click to collapse
Yes.
Download this https://mega.nz/#!Q0YQmIQD!KSwQvGymMUf-YA4A5oDFBvg12UwQlPDm5dIOdTDsEjc
You should be seeing either an archive either the update.app file, wich is the stock b130 rom.
Now, copy the update.app on the sd card into a folder called dload ( If you don't see it, just create it ).
Power off the phone, then press at the same time volume +, volume - and power and it should install the stock b130 rom. Next just do the update to b140 through the updater and reinstall twrp and try again .
If while updating you encounter any errors , try reinstalling stock recovery first.

cosminvr27 said:
Yes.
Download this https://mega.nz/#!Q0YQmIQD!KSwQvGymMUf-YA4A5oDFBvg12UwQlPDm5dIOdTDsEjc
You should be seeing either an archive either the update.app file, wich is the stock b130 rom.
Now, copy the update.app on the sd card into a folder called dload ( If you don't see it, just create it ).
Power off the phone, then press at the same time volume +, volume - and power and it should install the stock b130 rom. Next just do the update to b140 through the updater and reinstall twrp and try again .
If while updating you encounter any errors , try reinstalling stock recovery first.
Click to expand...
Click to collapse
Ok when i got home i'll do.that and tell what happened.
Thank you so much

Problem downgrading to MM from N

Hey guys!
I've installed the Nougat beta for my P9 Lite VNS-L21 Dual Sim, but now I want to downgrade to MM. This is what I did:
0. Installed Nougat via Melticulus TWRP
1. Installed Revolution Recovery (because Melticulus TWRP had stopped working, idk why)
2. Flashed OEMInfo
3. Copied Version B150/B151 (I've tried both) to the SDCard
4. Started the P9 Lite with Power + Volume UP + Volume DOWN and tried to flash one of the versions.
I'm stuck here, the Huawei Recovery says the following: "Software install failed! Incompatibility with current version. Please download the correct update package!"
I've used HTC Mania, Thread NR 1200630 to download the stock rom for my P9 Lite, I've tried both the VNS-L21C432B151 Android 6.0 EMUI 4.1.1 Europa and the VNS-L21C432B150 Android 6.0 EMUI 4.1.1 Europa

4240Benny said:
Hey guys!
I've installed the MM beta for my P9 Lite VNS-L21 Dual Sim, but now I want to downgrade to MM. This is what I did:
0. Installed MM via Melticulus TWRP
1. Installed Revolution Recovery because Melticulus TWRP had stopped working (idk why)
2. Flashed OEMInfo
3. Copied B150/B151 (I've tried both) to the SDCard
4. Started the P9 Lite with Power + Volume UP + Volume DOWN
I'm stuck here, the Huawei Recovery says the following: "Software install failed! Incompatibility with current version. Please download the correct update package!"
I've used HTC Mania, Thread NR 1200630 to download the stock rom for my P9 Lite, I've tried both the VNS-L21C432B151 Android 6.0 EMUI 4.1.1 Europa and the VNS-L21C432B150 Android 6.0 EMUI 4.1.1 Europa
Click to expand...
Click to collapse
You installed MM BETA on MM and now wanna downgrade to MM ..? You know what means MM? On which mm you ware before?

sorry. I've corrected my question, looks like I was a bit brain afk... Whatever, thank you for your help!
(Yes, i know what MM means (Marshmallow), N menas Nougat)

4240Benny said:
sorry. I've corrected my question, looks like I was a bit brain afk... Whatever, thank you for your help!
(Yes, i know what MM means (Marshmallow), N menas Nougat)
Click to expand...
Click to collapse
SALUT have you, before flashing oeminfo, allowed Storage parameters, default location SD card.

Chisetdel31260 said:
SALUT have you, before flashing oeminfo, allowed Storage parameters, default location SD card.
Click to expand...
Click to collapse
I've changed the default location to SD Card in TWRP (Install Zip --> Select storage) because don't have access to my os any more, bot how do I allow Storage Parameters?

4240Benny said:
I've changed the default location to SD Card in TWRP (Install Zip --> Select storage) because don't have access to my os any more, bot how do I allow Storage Parameters?
Click to expand...
Click to collapse
Ok so if you have allowed it, well, flasher b130full it will have to go.
If not, twrpnougat nougat fash, just to start, authorized SD card storage location.
Returned to TWRPNougat flash oeminfo and restarted with dload.
http://www.htcmania.com/showthread.php?t=1265458

Chisetdel31260 said:
Ok so if you have allowed it, well, flasher b130full it will have to go.
If not, twrpnougat nougat fash, just to start, authorized SD card storage location.
Returned to TWRPNougat flash oeminfo and restarted with dload.
http://www.htcmania.com/showthread.php?t=1265458
Click to expand...
Click to collapse
Thank you, I'll try this

It doesn't work for me. The strange thing is I can't even flash system using fastboot, it gives me a FAILED (remote: sparse flash write failure) error...

can someone send me a NANDROID BACKUP of MM for VNS-L21?
PLS!!!!!!

Check bootloader,? The fastboot works, ?
TWRPNougat could install you a firmware nougat b3xx.zip + b3xxhw.zip and restart telephone.?
Which oeminfo used you ?

Chisetdel31260 said:
Check bootloader,? The fastboot works, ?
TWRPNougat could install you a firmware nougat b3xx.zip + b3xxhw.zip and restart telephone.?
Which oeminfo used you ?
Click to expand...
Click to collapse
Well, fastboot works, I'm able to flash recovery, recovery2 and boot but I'm not able to flash system. I can't install any os. I've used the C432OemInfo-DUALSIM-P9LITE.zip from @BadWolfYe.

???
what do you want now?
downgarde to mm or install Android N you can do both in this situation

Pls help me asap!!!!!!!
Just send me a nandroid backup of mm for vns-l21 dual sim please!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

soory dude I have also installed android n on vns l21 dual sim and don`t have mm back up but I can tell you the process by whick you can also install mm or n on your device in this situation tooo

shann1231 said:
what do you want now?
downgarde to mm or install Android N you can do both in this situation
Click to expand...
Click to collapse
Well, no, I can't. Thats the problem. When I try to flash MM system.img it doesn't work (see post above) and when I try to do it with the dload method it tells me that the version is not compatible...

shann1231 said:
soory dude I have also installed android n on vns l21 dual sim and don`t have mm back up but I can tell you the process by whick you can also install mm or n on your device in this situation tooo
Click to expand...
Click to collapse
well...how?
and pls help me ASAP!!!!!

All you Have to do us download huawei update.app extracter and open mm update.app in it and extract boot.img,recover.img,system.img,userdata.img,oem.img and extract these files in adb tools folder then open maf32 and reboot your p9 lite in fastboot by going in revolutionary recovery>reboot>bootloader
then after your device is in boot loader enter the following commands
coomand will be In next message

shann1231 said:
All you Have to do us download huawei update.app extracter and open mm update.app in it and extract boot.img,recover.img,system.img,userdata.img,oem.img and extract these files in adb tools folder then open maf32 and reboot your p9 lite in fastboot by going in revolutionary recovery>reboot>bootloader
then after your device is in boot loader enter the following commands
coomand will be In next message
Click to expand...
Click to collapse
alright...

shann1231 said:
soory dude I have also installed android n on vns l21 dual sim and don`t have mm back up but I can tell you the process by whick you can also install mm or n on your device in this situation tooo
Click to expand...
Click to collapse
Could you explain it here? Maybe it solves my problem too

just tell me one thing why are you installing mm when you can install android n

Back to stock using fastboot

Hi, since i'm not confident with adb/fastboot commands, i'm asking help for restoring the original firmware and recovery in my MLA-L11.
I've downloaded the two files from Firmware Finder (i'm sure 100% they are the right one) but i don't know how to proceed. Anyone can help there? Thank you

GertFromTheWell said:
Hi, since i'm not confident with adb/fastboot commands, i'm asking help for restoring the original firmware and recovery in my MLA-L11.
I've downloaded the two files from Firmware Finder (i'm sure 100% they are the right one) but i don't know how to proceed. Anyone can help there? Thank you
Click to expand...
Click to collapse
Hey!
You have to go back to EMUI 4.1 by restoring a TWRP backup and then you will update to EMUI 5. Ive used the following process on my CAN-L11 and worked fine. It should work on all models. @virusdunil has followed the same process on his MLA-L03 and everything went fine.
Let me know if you experience some trouble during this process.
Go back to EMUI 4.1 (MM)
1) Download this TWRP backup of MM: https://forum.xda-developers.com/showpost.php?p=73003510&postcount=60.
2) You can put the backup to internal memory or sdcard, After you've chose where you wanna put it, take a backup of boot.img with TWRP to internal/sdcard (where you wanna put the backup), so you'll get a folder with this structure: TWRP > BACKUPS > FPFDU16A20001907 (you'll have different number I guess). Then you'll put the twrp backup folder (which you have downloaded) in that folder with numbers
3) Boot in TWRP, wipe system, data, cache, dalvik cache from twrp > wipe > advanced and then you restore the backup from TWRP > restore (restore only system + data + boot). Then you reboot and you're good to go.
Click to expand...
Click to collapse
Now update to EMUI 5 (N)
After youve downloaded the stock firmware using Firmware Finder, you should have two files:
- update.zip
- update_data_full_CAN-L11_hw_eu.zip (example)
Backup your internal memory as it will be wiped at step 8).
1) Extract update.zip. Then you get UPDATE.APP.
2) Download Huawei Update Extractor.
3) Open Huawei Update Extractor, choose UPDATE.APP from the folder where youve extracted it. Right click RECOVERY.img and extract it.
4) Now boot your phone in fastboot mode by pressing and holding the power and the volume down buttons at the same time.
5) Type in terminal / command prompt on PC to flash the stock recovery which youve extracted at step 3):
Code:
fastboot flash recovery recovery.img
.
6) Reboot.
7) Put update.APP in a folder called dload on your sdcard.
8) Dial *#*#2846579#*#* and choose Sofware Upgrade > SDCard Upgrade. Now EMUI 5 will be installed, bootloader gets relocked and internal memory gets wiped. Now wait about 5 mins (maximum 10 mins). If the phone isnt booting within that time, then boot the phone in stock recovery by pressing and holding power and volume up buttons and choose "Wipe data / factory reset" and then "Wipe cache partition". After you reboot, the phone should boot. Skip the setup wizard.
9) Remove update.APP from dload folder from your sdcard and extract the other zip (example update_data_full_CAN-L11_hw_eu.zip) and put all the files/folders extracted in dload folder.
10) Dial *#*#2846579#*#* and choose Sofware Upgrade > SDCard Upgrade.
11) You are done.
Click to expand...
Click to collapse
To fix the themes app on EMUI 5, you can check this thread.
PS: im sorry for the missing apostrophe, but im not used to add that from PC keyboard. In fact, i dont even know how to add it, i think i need to change keyboard settings (language).

#Henkate said:
Hey!
You have to go back to EMUI 4.1 by restoring a TWRP backup and then you will update to EMUI 5. Ive used the following process on my CAN-L11 and worked fine. It should work on all models. @virusdunil has followed the same process on his MLA-L03 and everything went fine.
Let me know if you experience some trouble during this process.
Go back to EMUI 4.1 (MM)
Now update to EMUI 5 (N)
.
6) Reboot.
7) Put update.zip in a folder called dload on your sdcard.
8) Dial *#*#2846579#*#* and choose Sofware Upgrade > SDCard Upgrade. Now EMUI 5 will be installed, bootloader gets relocked and internal memory gets wiped. Now wait about 5 mins (maximum 10 mins). If the phone isnt booting within that time, then boot the phone in stock recovery by pressing and holding power and volume up buttons and choose "Wipe data / factory reset" and then "Wipe cache partition". After you reboot, the phone should boot. Skip the setup wizard.
9) Remove update.zip from dload folder from your sdcard and place the other zip there (example update_data_full_CAN-L11_hw_eu.zip.
10) Dial *#*#2846579#*#* and choose Sofware Upgrade > SDCard Upgrade.
11) You are done.
To fix the themes app on EMUI 5, you can check this thread.
PS: im sorry for the missing apostrophe, but im not used to add that from PC keyboard. In fact, i dont even know how to add it, i think i need to change keyboard settings (language).
Click to expand...
Click to collapse
Love you, i'll try ASAP.

#Henkate said:
Hey!
You have to go back to EMUI 4.1 by restoring a TWRP backup and then you will update to EMUI 5. Ive used the following process on my CAN-L11 and worked fine. It should work on all models. @virusdunil has followed the same process on his MLA-L03 and everything went fine.
Let me know if you experience some trouble during this process.
Go back to EMUI 4.1 (MM)
Now update to EMUI 5 (N)
To fix the themes app on EMUI 5, you can check this thread.
PS: im sorry for the missing apostrophe, but im not used to add that from PC keyboard. In fact, i dont even know how to add it, i think i need to change keyboard settings (language).
Click to expand...
Click to collapse
Hi robert, i succesfully downgraded to MM and restored (i guess) stock recovery. But when I try to upgrade to nougat via sdcard upgrade the phone can't find the update.zip file.
Maybe the problem is my phone believe he is a CAN instead of a MLA, and don't recognize a MLA update.zip file?

If that is the case, you need to use the firmware extractor and "fastboot flash system system.img" to get your build.prop back. That would get your device to recognize as what it is.

wangdaning said:
If that is the case, you need to use the firmware extractor and "fastboot flash system system.img" to get your build.prop back. That would get your device to recognize as what it is.
Click to expand...
Click to collapse
I found the issue, I had to unzip the update.zip tp UPDATE.app file in dload folder. The phone got bootloop at first flash, but wiping all solved the problem. Now i'm back to stock with proper build number, thanks @wangdang and @#Henkate for your support :victory:

GertFromTheWell said:
Hi robert, i succesfully downgraded to MM and restored (i guess) stock recovery. But when I try to upgrade to nougat via sdcard upgrade the phone can't find the update.zip file.
Maybe the problem is my phone believe he is a CAN instead of a MLA, and don't recognize a MLA update.zip file?
Click to expand...
Click to collapse
GertFromTheWell said:
I found the issue, I had to unzip the update.zip tp UPDATE.app file in dload folder. The phone got bootloop at first flash, but wiping all solved the problem. Now i'm back to stock with proper build number, thanks @wangdang and @#Henkate for your support :victory:
Click to expand...
Click to collapse
I'm sorry, it looks like I've wrote update.zip instead update.APP and also at step 9). It was my fault .
I've updated the steps 7 and 9. Thank you!

#Henkate said:
Hey!
You have to go back to EMUI 4.1 by restoring a TWRP backup and then you will update to EMUI 5. Ive used the following process on my CAN-L11 and worked fine. It should work on all models. @virusdunil has followed the same process on his MLA-L03 and everything went fine.
Let me know if you experience some trouble during this process.
Go back to EMUI 4.1 (MM)
Now update to EMUI 5 (N)
To fix the themes app on EMUI 5, you can check this thread.
PS: im sorry for the missing apostrophe, but im not used to add that from PC keyboard. In fact, i dont even know how to add it, i think i need to change keyboard settings (language).
Click to expand...
Click to collapse
Can you please give me the backup of cust.img and product? or cust.img file and product? because when i try to restore twrp backup or 4.1
Failed to mount /product (invalid argument).
Failed to mount /cust (invalid argument). Got this error
and my phone stuck on unlocked bootloader option.
1: click power button to continues
2 click vol Up for Erecovery
3: will be boot into 5 seconds etc and when i click power button phone reboot and again these options

abuapka said:
Can you please give me the backup of cust.img and product? or cust.img file and product? because when i try to restore twrp backup or 4.1
Failed to mount /product (invalid argument).
Failed to mount /cust (invalid argument). Got this error
and my phone stuck on unlocked bootloader option.
1: click power button to continues
2 click vol Up for Erecovery
3: will be boot into 5 seconds etc and when i click power button phone reboot and again these options
Click to expand...
Click to collapse
Cust: https://www.mediafire.com/file/oncwuuob84ubisy/cust_backup.zip
Product: http://www.mediafire.com/file/el054rk7a6tuya2/product_backup.zip
The backups are from N partitions.

#Henkate said:
Cust: https://www.mediafire.com/file/oncwuuob84ubisy/cust_backup.zip
Product: http://www.mediafire.com/file/el054rk7a6tuya2/product_backup.zip
The backups are from N partitions.
Click to expand...
Click to collapse
N partitions? Nougat ?

abuapka said:
N partitions? Nougat ?
Click to expand...
Click to collapse
Yes.

#Henkate said:
Yes.
Click to expand...
Click to collapse
THanks Bro.
Thanku so Much
Got My Phone back to stock 4.1 but its CAN
Before It was MLa-l11 By the way thanku so much

You sure you flashed stock MLA firmware?

no
wangdaning said:
You sure you flashed stock MLA firmware?
Click to expand...
Click to collapse
i didnt flash stock mla firmware i jus5 flashed 4.1 twrp backup

#Henkate said:
Hey!
You have to go back to EMUI 4.1 by restoring a TWRP backup and then you will update to EMUI 5. Ive used the following process on my CAN-L11 and worked fine. It should work on all models. @virusdunil has followed the same process on his MLA-L03 and everything went fine.
Let me know if you experience some trouble during this process.
Go back to EMUI 4.1 (MM)
Now update to EMUI 5 (N)
To fix the themes app on EMUI 5, you can check this thread.
PS: im sorry for the missing apostrophe, but im not used to add that from PC keyboard. In fact, i dont even know how to add it, i think i need to change keyboard settings (language).
Click to expand...
Click to collapse
hey how are you hope you fine
my mobile NOVA PLUS MLA11
i just bricked it and unbricked it by your method ( RESTORE TWRP BACKUP ) https://forum.xda-developers.com/nov...tboot-t3708585
now iam tring to get the correct firmware from huwaei finder but idont know wchich the correct one
because idont know my model (MLA-L11C"?????") idont know if it c185 or c432 !!
itried installlast one from c185 but it faild on 5%
thankss

Echtar said:
hey how are you hope you fine
my mobile NOVA PLUS MLA11
i just bricked it and unbricked it by your method ( RESTORE TWRP BACKUP ) https://forum.xda-developers.com/nov...tboot-t3708585
now iam tring to get the correct firmware from huwaei finder but idont know wchich the correct one
because idont know my model (MLA-L11C"?????") idont know if it c185 or c432 !!
itried installlast one from c185 but it faild on 5%
thankss
Click to expand...
Click to collapse
Hey!
I've got your PM, but I see that meanwhile you've posted here and you made a new thread too... You don't have to make so many posts, a post or a thread is enough to get the attention of someone.
In your case, the phone model is MLA-L11 and C185/C432 is the build number as far as I remember. You can check the build number in Settings > About phone. I don't know if there's any other way to check, if you're on other build number now and you don't know which one was yours.

#Henkate said:
Hey!
I've got your PM, but I see that meanwhile you've posted here and you made a new thread too... You don't have to make so many posts, a post or a thread is enough to get the attention of someone.
In your case, the phone model is MLA-L11 and C185/C432 is the build number as far as I remember. You can check the build number in Settings > About phone. I don't know if there's any other way to check if you're on other build number now and you don't know which one was yours.
Click to expand...
Click to collapse
iam on nrd90m test-keys

Echtar said:
iam on nrd90m test-keys
Click to expand...
Click to collapse
Post a screenshot of Settings > About phone as I don't really remember how it looks there.

Hi
I've managed to backup EMUI 4.1, however I'm getting error message "software install failed" trying to update EMUI to 5.0 (pops up, every time when it reach 5% progress).
Any idea how to fix it?
best regards

#Henkate said:
Now update to EMUI 5 (N)
Click to expand...
Click to collapse
Steps #9 and #10 do not work for me ("Software install failed"). But I wonder if they are necessary after all, because Product Id, IMEI, Build-number (and of course EMUI-Version and Android-Version) are stock again.
And isn't "update_full_CAN-L01_hw_eu.zip" supposed to be included in the "update.zip"-file? I thougt "update.zip" allready delivers every part of the ROM.

P9 Lite can't update

hi everyone
i have p9 lite l31 with emui 4.1.1 and mm
i can't update it to nougat can anyone tell me how ? i tried with dload and twrp and still can't
pls if u have full method tell me or give me link
ps : bootloader unlocked

rrr8 said:
hi everyone
i have p9 lite l31 with emui 4.1.1 and mm
i can't update it to nougat can anyone tell me how ? i tried with dload and twrp and still can't
pls if u have full method tell me or give me link
ps : bootloader unlocked
Click to expand...
Click to collapse
Hello,
what is your complete firmware ?
EX. VNS-L31C432B160
EX. VNS-L31C185B151
EX. VNS-L31C636B170
Having this info you can use Firmware Finder app
and upgrade to Emui 5, android 7.
I can help you doing this...
Cheers

Dadditz said:
Hello,
what is your complete firmware ?
EX. VNS-L31C432B160
EX. VNS-L31C185B151
EX. VNS-L31C636B170
Having this info you can use Firmware Finder app
and upgrade to Emui 5, android 7.
I can help you doing this...
Cheers
Click to expand...
Click to collapse
hi, thank you for your help
my complete firmware is VNS-L31C432B160
can you figure out how to update ?

rrr8 said:
hi, thank you for your help
my complete firmware is VNS-L31C432B160
can you figure out how to update ?
Click to expand...
Click to collapse
If you have TWRP on board, download two files from link, copy it to the SD card. Reboot in TWRP, flash first file update.zip , go back to the TWRP main menu and flash second file hw_eu.zip . Reboot system and do factory reset from Stock recovery .
Links (VNS-L31C432B370):
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v80460/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...-L31_hw_eu/update_data_full_VNS-L31_hw_eu.zip

thank you,
yes i have twrp but i don't know if it's the right version to install this rom
i'll try this asap and tell you about the result

rrr8 said:
thank you,
yes i have twrp but i don't know if it's the right version to install this rom
i'll try this asap and tell you about the result
Click to expand...
Click to collapse
Use this TWRP:
https://mega.nz/#!MsNXRCgI!4ZQW2ebrN-cvO21J9lJ2qz3UYwcE3onMFZzRMcdRY9o
TWRP for Nougat:
https://mega.nz/#!EsESQQhK!uc_lfXEfDW6U7Lq2VeNOYq5OWUID0G-YyhK-oUL4deU
It's recommended to install TWRP over the huawei eRecovery with the command
fastboot flash recovery2 twrp.img

bozka1 said:
Use this TWRP:
https://mega.nz/#!MsNXRCgI!4ZQW2ebrN-cvO21J9lJ2qz3UYwcE3onMFZzRMcdRY9o
TWRP for Nougat:
https://mega.nz/#!EsESQQhK!uc_lfXEfDW6U7Lq2VeNOYq5OWUID0G-YyhK-oUL4deU
It's recommended to install TWRP over the huawei eRecovery with the command
fastboot flash recovery2 twrp.img
Click to expand...
Click to collapse
thank you for all your help, sry for the late tho.
i'll try this TWRP and inform you about the result.
btw, if i flash it as recovery2, how can i boot it ?

rrr8 said:
thank you for all your help, sry for the late tho.
i'll try this TWRP and inform you about the result.
btw, if i flash it as recovery2, how can i boot it ?
Click to expand...
Click to collapse
I automatically wrote 'recovery2', but in this case it doesn't matter, the new FW will overwrite TWRP.
I apologize for the unnecessary complication .
(Why recovery2 ? eRecovery is basically useless on this phone. It's useful flash TWRP over it by having stock recovery as 'recovery' and TWRP as 'eRecovery' (recovery2).
Among other things, you can have access to official OTA updates yet still being able to do everything you could do with TWRP etc. etc.
It makes things easier
How to boot it:
reboot your phone, as soon as the "yellow warning" appears on the screen, hold down the Volume Up for 3 seconds, phone will boot in TWRP.)

bozka1 said:
I automatically wrote 'recovery2', but in this case it doesn't matter, the new FW will overwrite TWRP.
I apologize for the unnecessary complication .
(Why recovery2 ? eRecovery is basically useless on this phone. It's useful flash TWRP over it by having stock recovery as 'recovery' and TWRP as 'eRecovery' (recovery2).
Among other things, you can have access to official OTA updates yet still being able to do everything you could do with TWRP etc. etc.
It makes things easier
How to boot it:
reboot your phone, as soon as the "yellow warning" appears on the screen, hold down the Volume Up for 3 seconds, phone will boot in TWRP.)
Click to expand...
Click to collapse
thank you for all this, i'll try your method and hope it will work

rrr8 said:
hi, thank you for your help
my complete firmware is VNS-L31C432B160
can you figure out how to update ?
Click to expand...
Click to collapse
Dude,
i was replying to you suggesting to use Firmware Finder
in order to upgrade to android 7,
but i assume you will reach the same using @bozka1 guide.
Enjoy the community and good luck..
Cheers

bozka1 said:
If you have TWRP on board, download two files from link, copy it to the SD card. Reboot in TWRP, flash first file update.zip , go back to the TWRP main menu and flash second file hw_eu.zip . Reboot system and do factory reset from Stock recovery .
Links (VNS-L31C432B370):
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v80460/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...-L31_hw_eu/update_data_full_VNS-L31_hw_eu.zip
Click to expand...
Click to collapse
thanks, you saved my life, it worked !!
I successfully installed android 7 with emui 5 in my device, ty