Database Users

Help unbrick Mate 8 l29c636b521 nougat

I successfully upgraded my Mate 8 to nougat. Then I tried to root the phone. In the middle of flashing superSu, my phone suddenly rebooted and stuck on the bootloop. It never booted again. I tried searching for all the possibilities to unbrick it, but no hope. My mate 8 is bootloader-unlocked. My phone won't boot to trwp even I tried to fashboot flash the it. I really need help from the experts. Thank you all in advance.
I accidentally posted on the wrong subf-forum, please move this post over to the Q&A troubleshooting . thanks you

1.Turn off the phone
2.Connect pc usb cable
3.Hold power+vol down
u should see rescue bootloader page,
now u can flash twrp recovery (for emui5 of course) then u can boot into twrp and do the firmware flashing again
Sent from my HUAWEI NXT-L29 using Tapatalk

amin318 said:
1.Turn off the phone
2.Connect pc usb cable
3.Hold power+vol down
u should see rescue bootloader page,
now u can flash twrp recovery (for emui5 of course) then u can boot into twrp and do the firmware flashing again
Sent from my HUAWEI NXT-L29 using Tapatalk
Click to expand...
Click to collapse
Do Exatly what he said

I did flash the 3.0.2.0-next twrp My phone won't boot to TWRP mode. I don't know if I should flash the stock nougat recovery.img and then flash the twrp.img ?
Was the 3.0.2.0-next right for the nougat ? thanks
After trying to flash twrp many times, the screen is always on " your device is booting now .. "

Did u tried frd-twrp for emui5?
https://mega.nz/#!xg8lVBgJ!4v0DbY-QLGtQVnYvTkTtIXRBmx5q-ZoJp90PSMqlh-U
If it didn't worked try to dload ur last emui4.x via SD card, sometimes it work
Sent from my HUAWEI NXT-L29 using Tapatalk

anthony.ha92 said:
I did flash the 3.0.2.0-next twrp My phone won't boot to TWRP mode. I don't know if I should flash the stock nougat recovery.img and then flash the twrp.img ?
Was the 3.0.2.0-next right for the nougat ? thanks
After trying to flash twrp many times, the screen is always on " your device is booting now .. "
Click to expand...
Click to collapse
If you downloaded from the official TWRP app. It can't be use. You need twrp Nougat that given by @amin318

I successfully unbricked my Mate. It is fully working again. Thank you guys for the help. I really appreciate it.
Flash twrp, flash both update zip and hw_data side by side, reboot to recovery to do a factory reset and then system reboot wait few minutes and then boom, working Mate 8 again.
oh and one more question, im currently on the official beta b521, I found the b563 via the firmware finder.
There are 2 files, one OTA for 400mb, and the other OTA for 1.3 gb. which one should I download in order to upgrade to B563 ? And do I do it by the dload method ?

anthony.ha92 said:
I successfully unbricked my Mate. It is fully working again. Thank you guys for the help. I really appreciate it.
Flash twrp, flash both update zip and hw_data side by side, reboot to recovery to do a factory reset and then system reboot wait few minutes and then boom, working Mate 8 again.
oh and one more question, im currently on the official beta b521, I found the b563 via the firmware finder.
There are 2 files, one OTA for 400mb, and the other OTA for 1.3 gb. which one should I download in order to upgrade to B563 ? And do I do it by the dload method ?
Click to expand...
Click to collapse
Just get the 1.3gb and push it to system updater.

HELP
I need your help¡¡ I have the same error , can you explain that :Flash twrp, flash both update zip and hw_data side by side. tks

Huawei p9 lite

Hi Guys
I have huawei p9 lite and I need firmware VNS-L31C900B150
I can't find it in the internet
Please help I need it to reflash my phone ..

Use Huawei firmware finder or just use the c432 version, I recommend it

Potato997 said:
Use Huawei firmware finder or just use the c432 version, I recommend it
Click to expand...
Click to collapse
I already tryed C432 and it doesn't work
And my phone is off because it doesn't have any OS so I can't use huawei firmware finder
Is there any idea or solution for this problem..!

Huawei firmware finder is also a program for Windows, Google it

Potato997 said:
Huawei firmware finder is also a program for Windows, Google it
Click to expand...
Click to collapse
Yeah now I found it and tried it but it's doesn't work
I can't found my device firmware ..
Please any more idea

Can you access to fastboot and TWRP?

Potato997 said:
Can you access to fastboot and TWRP?
Click to expand...
Click to collapse
do u know how to flash Cust, Vendor, Product etc. for p9 lite???
or can you give me link to download them and flash?

Potato997 said:
Can you access to fastboot and TWRP?
Click to expand...
Click to collapse
yes I can access to fastboot only
can't access to TWRP

Try to flash Meticulus's TWRP, if it does not work try Revolution recovery

Potato997 said:
Try to flash Meticulus's TWRP, if it does not work try Revolution recovery
Click to expand...
Click to collapse
Already I tried to flash TWRP and it flashed good but when I try to get TWRP mode my device doesn't work
here is my full problem https://forum.xda-developers.com/huawei-p9lite/help/huawei-p9-lite-flashed-formating-t3576669

Potato997 said:
Try to flash Meticulus's TWRP, if it does not work try Revolution recovery
Click to expand...
Click to collapse
Now I get revolution recovery and I can access to it
I want to install lineageOS 14.1 like here https://www.youtube.com/watch?v=hNhv-fKJFaw
but after I finish my phone doesn't work
I think that's because revolution recovery " I cant install TWRP recovery but my phone doesn't work on TWRP I don't know why "
can you help me with this please..

To install LineageOS you have first to downgrade to stock 6.0
You can find countless thread about how-to, after you downgrade to MM you can install LineageOS following the video that you found

Potato997 said:
To install LineageOS you have first to downgrade to stock 6.0
You can find countless thread about how-to, after you downgrade to MM you can install LineageOS following the video that you found
Click to expand...
Click to collapse
I'm not sure if I understand to you
I don't have any os on my phone now
and I tried to install lineageos like video above and everything done but phone doesn't work..

Follow these steps:
1. Unbrick your phone installing stock EMUI 4.1.1 Android 6
2. Unlock bootloader
3. Flash Meticulus's TWRP
4. Install LineageOS following the video
The reason why you have first to install EMUI 4 is because it's the only way to install LineageOS. To restore your device, you can find a lot of thread on our P9 lite subforum, search in Q&A and Guides and you will find a lot of tutorial to unbrick and restore the phone to stock Android 6.

Potato997 said:
Follow these steps:
1. Unbrick your phone installing stock EMUI 4.1.1 Android 6
2. Unlock bootloader
3. Flash Meticulus's TWRP
4. Install LineageOS following the video
The reason why you have first to install EMUI 4 is because it's the only way to install LineageOS. To restore your device, you can find a lot of thread on our P9 lite subforum, search in Q&A and Guides and you will find a lot of tutorial to unbrick and restore the phone to stock Android 6.
Click to expand...
Click to collapse
Thank you because you're here with me..
I tried every firmware to flash it on my device and no one help me
I can't find my device firmware " VNS-L31C900B150 " even with huawei firmware finder
each time I get new problem or just phone tel me incorrect version please download correct version ..
I don't know what I will do to use my phone :crying:
Do you have any idea to re-life my phone..

Did you searched in the forum the guides..? To unbrick the phone you have to boot to TWRP, either Meticulus's or Revolution one, flash the oeminfo of your device, the dload the c432 firmware

Potato997 said:
Did you searched in the forum the guides..? To unbrick the phone you have to boot to TWRP, either Meticulus's or Revolution one, flash the oeminfo of your device, the dload the c432 firmware
Click to expand...
Click to collapse
yeah I tried c432 and device get error " incorrect version please download correct version "
and what you mean in "oeminfo" I can't find results after search for it and my device name on this forum..!

Download this
https://drive.google.com/open?id=0B3sZyHMlYDO0S1c2Y1lNMlJaVXM
Flash it in TWRP
Retry dload c432

Potato997 said:
Download this
https://drive.google.com/open?id=0B3sZyHMlYDO0S1c2Y1lNMlJaVXM
Flash it in TWRP
Retry dload c432
Click to expand...
Click to collapse
Now I really have bad luck :crying::crying::crying:
I flashed the file you give me
and after that reboot phone to try re-dload C432 and I get same problem " incorrect version "
after that I reboot my phone ti back to recovery mode and I get bootloader lucked
And I don't have bootloader code to re-unlock it
What I can do .. " my phone doesn't work "

baselmd47 said:
Now I really have bad luck :crying::crying::crying:
I flashed the file you give me
and after that reboot phone to try re-dload C432 and I get same problem " incorrect version "
after that I reboot my phone ti back to recovery mode and I get bootloader lucked
And I don't have bootloader code to re-unlock it
What I can do .. " my phone doesn't work "
Click to expand...
Click to collapse
Man, you flash wrong oeminfo...
That oeminfo is maybe for VNS-L21...
Regarding bootloader unlock code if you can provide IMEI/SN from phonebox i can generate a unlock code for you.

Twrp nougat install image?

Hello
I am not a hope in TWRP.
And I wonder if TWRP for nougat can install .img file as it is written install image.
Is it possible to install cust.img, product.img, etc .....?
and how?
Thank you

Chisetdel31260 said:
Hello
I am not a hope in TWRP.
And I wonder if TWRP for nougat can install .img file as it is written install image.
Is it possible to install cust.img, product.img, etc .....?
and how?
Thank you
Click to expand...
Click to collapse
i tried to flash stock boot.img by twrp and it doesn't work, my phone stucks at your bootloader is unlocked ...

simo255 said:
i tried to flash stock boot.img by twrp and it doesn't work, my phone stucks at your bootloader is unlocked ...
Click to expand...
Click to collapse
OK,
I wanted to be on.
Because twrp revolution rc3 shows install image boot and recovery.
And twrp 3.1.0.2 shows boot, recovery, cust, misc, oeminfo, system, vendor, product, version.
But nothing goes. I thought I was hurting him. thank you

Chisetdel31260 said:
OK,
I wanted to be on.
Because twrp revolution rc3 shows install image boot and recovery.
And twrp 3.1.0.2 shows boot, recovery, cust, misc, oeminfo, system, vendor, product, version.
But nothing goes. I thought I was hurting him. thank you
Click to expand...
Click to collapse
yes but they aren't working well

simo255 said:
yes but they aren't working well
Click to expand...
Click to collapse
As you see I am still trying to install b380.
What I managed to do is;
Since rom revolution rc4,
Installs root v5.2 because boot is b380.
Adb flash system.img from b380
Reboot.
It is not broken everything works, but it does not write b380.

Chisetdel31260 said:
As you see I am still trying to install b380.
What I managed to do is;
Since rom revolution rc4,
Installs root v5.2 because boot is b380.
Adb flash system.img from b380
Reboot.
It is not broken everything works, but it does not write b380.
Click to expand...
Click to collapse
trying to install b380? first go back to mm, then upgrade to b380

mjz2cool said:
trying to install b380? first go back to mm, then upgrade to b380
Click to expand...
Click to collapse
Yes, I have already tried, since MM, it started but it writes nrd90m, and the parameters do not go anymore. And it lacks significant appl.
Datafull public installs but it is not complete.
And datafull hw eu does not install error 7.
Not serious I will test again tonight to the calm.
And tomorrow huawei will publish LOL

Chisetdel31260 said:
Yes, I have already tried, since MM, it started but it writes nrd90m, and the parameters do not go anymore. And it lacks significant appl.
Datafull public installs but it is not complete.
And datafull hw eu does not install error 7.
Not serious I will test again tonight to the calm.
And tomorrow huawei will publish LOL
Click to expand...
Click to collapse
if you follow the instructions closely and have the correct oeminfo and firmware all should be fine

So, here, what I could find and install nougat.
Firmware full-ota-mf not pv.
For, full ota mf, there are three files.
_ Update.zip.
_file public.zip.
_file datafull.zip.
Uses huawei extractor to unpack update.app of update.zip and file datafull.zip.
You can find and install.
With adb and flash fastboot
_boot.img
_system.img
With twrp edit hassan install image.
_vendor.img
_ Cust.img
_ Version.img.
On nougat the device works correctly.
Now I am looking for a solution to install product.img
Any help or advice, would be welcome.
thank you

Huawei P9 Lite VNS-L31 Problem

Hi guys,
I would like to ask help with the problem I'm facing with my Huawei phone.
I had EMUI 4.1 which was in Stock Marshmallow and I updated it to the EMUI 5.0 | Nougat 7.0
THEN, I tried to flash a Revolutionary TWRP Nougat B.9 and it was ok, but then when I flashed SuperSU from onhax.me it got stuck on the part where it says
" Your phone has been unlocked and unsafe ... "
It was stuck there for almost an hour and thought that it is now softbricked. So I made a move of flashing bunch of ROMs that I thought that would fix it, the last ROM I tried to flash is RevolutionROM-P9Lite-B161-RC3_17-11-16
It seemed like it flashed it fine but says
Updating partition details...
mount -o bind '/data/media' 'sdcard' process ended with ERROR: 134
So I rebooted my phone and it went to
Your device has been unlocked and can't be trusted.
To learn more, visit:
http://zh.ui.vmail.com/emotiondownload.php?mod=restore
-------------------------------------------------
(1) Press Power key to continue
(2) Press Volume Up key up to 3 seconds to enter erecovery to restore your device.
(3) Your device will continue to boot 5 seconds later if there is no operation.
-------------------------------------------------
Click to expand...
Click to collapse
^ It shows that screen twice and after the 2nd boot, it goes to Huawei eRecovery which I think is the stock recovery for my phone.
Now I don't know what to do with my phone, I don't know what ROM I should try to flash, I don't know how I can restore my phone back.
Does anyone know what to do in this kind of situation?
Please, I need help

If you have no /dload/ folder in your sd card, and your are not connected with usb, a boot with 3 buttons method should be boot on TWRP.
Then flash oemInfo and put the update.app of the version of your choice in /dload/ folder in sd card and boot with 3 buttons method
(Sorry for my bad english i'm french)

Ax3noX_ said:
If you have no /dload/ folder in your sd card, and your are not connected with usb, a boot with 3 buttons method should be boot on TWRP.
Then flash oemInfo and put the update.app of the version of your choice in /dload/ folder in sd card and boot with 3 buttons method
(Sorry for my bad english i'm french)
Click to expand...
Click to collapse
I can still boot to TWRP, the only problem is finding out the right ROM I can flash to restore my phone. I can't seem to find a good guide/tutorial that would help for my situation

Please I need help

RuffneckFlex said:
I can still boot to TWRP, the only problem is finding out the right ROM I can flash to restore my phone. I can't seem to find a good guide/tutorial that would help for my situation
Click to expand...
Click to collapse
When i was bricked on EMUI 5.0, I have reflash EMUI 5 though TWRP ( the 2 update.zip) ans it booted

Ax3noX_ said:
When i was bricked on EMUI 5.0, I have reflash EMUI 5 though TWRP ( the 2 update.zip) ans it booted
Click to expand...
Click to collapse
Do you still have the link where I can get those files? Is there any stock EMUI 5.0 ROM that I can flash through TWRP?

RuffneckFlex said:
Do you still have the link where I can get those files? Is there any stock EMUI 5.0 ROM that I can flash through TWRP?
Click to expand...
Click to collapse
This is stock EMUI 5 :
https://forum.xda-developers.com/hu...-7-emui-5-0-vns-l-cb360-links-t3565117/page93

Ax3noX_ said:
This is stock EMUI 5 :
https://forum.xda-developers.com/hu...-7-emui-5-0-vns-l-cb360-links-t3565117/page93
Click to expand...
Click to collapse
Thank you for the link. What about the oeminfo? Do you happen to know where I could get it?

I want restore the stock firmware of my L23

Hello, the problem is what i want restore my Huawei p9 Lite vns-l23c212 but i have installed the EliteRom and the TWRP Elite, so i dont have the partitions (cust, vendor..) and not have a backup of that.
So I downloaded the Find firmware and i downloaded my Huawei version, but i dont have a idea of how install the .zip, i tried using fastboot but when i want install the partitions (cust,vendor..) the console give me a error saying "vendor command failed" or some
I want help from us, sorry for the bad english, im waiting ur comments

Hello,
use rollback method.
First revert your DATA filesystem from
F2FS to EXT4 using TWRP, then follow guide
in UNIFIED HELP THREAD..
Here the link..
https://forum.xda-developers.com/huawei-p9lite/how-to/unified-help-thread-huawei-p9-lite-t3649152
Read carefully, you need L23C212 rollback...
Regards.

Hey
so i have to install the emiui4.1 and then update the huawei until reach to the emui5

Sertinium said:
so i have to install the emiui4.1 and then update the huawei until reach to the emui5
Click to expand...
Click to collapse
Yes, the rollback package will give you
c900 global firmware. From there install
B160 for dual sim, B161 for single sim..
When you will stay with this firmware,
update using updater stock or use Firmware Finder..
Follow the guide..
Regards..

Edit: sorry B160 and B161 are firmware persent in C432 Europe area-
Dont know the one for your cust/region (C212).
Let google do the work for you..

Dadditz said:
Edit: sorry B160 and B161 are firmware persent in C432 Europe area-
Dont know the one for your cust/region (C212).
Let google do the work for you..
Click to expand...
Click to collapse
Okay but the problem now is what in number of compilation say nrd90m test keys and i installed the firmware of my phone

Sertinium said:
Okay but the problem now is what in number of compilation say nrd90m test keys and i installed the firmware of my phone
Click to expand...
Click to collapse
Hello,
according with the guide you flashed
wrong package...
You need FULL OTA UPDATE package, it must be
1.7/1.9 gbytes in size wich cames with data..
Flash new one or repeat the whole process.
I found this firmware on internet,
but do not assume any responsability.
If you want give a try here the direct download..
Check it with an antivirus/antimalware software..
http://download-c.huawei.com/download/downloadCenter?downloadId=92443&version=361914&siteCode=mx
If all will go in the right direction at the end
reboot to e-recovery (vol+ + Power)
and make a factory reset.
Hope this time will work..
Best regards

Dadditz said:
Hello,
according with the guide you flashed
wrong package...
You need FULL OTA UPDATE package, it must be
1.7/1.9 gbytes in size wich cames with data..
Flash new one or repeat the whole process.
I found this firmware on internet,
but do not assume any responsability.
If you want give a try here the direct download..
Check it with an antivirus/antimalware software..
http://download-c.huawei.com/download/downloadCenter?downloadId=92443&version=361914&siteCode=mx
If all will go in the right direction at the end
reboot to e-recovery (vol+ + Power)
and make a factory reset.
Hope this time will work..
Best regards
Click to expand...
Click to collapse
Hello, I have already downloaded that file and I already flashed it but the compilation says that it is C900B130 .... instead of C212B130, so how do I change the cust to C212 ?, because with the other I can not receive the update of emui5, and if the effort with the Finder Firmware gives me the NRD90M test keys.
Sorry for the inconvenience

Sertinium said:
Hello, I have already downloaded that file and I already flashed it but the compilation says that it is C900B130 .... instead of C212B130, so how do I change the cust to C212 ?, because with the other I can not receive the update of emui5, and if the effort with the Finder Firmware gives me the NRD90M test keys.
Sorry for the inconvenience
Click to expand...
Click to collapse
Hello man,
really dont know if i badly explained..
My friend to bring back to MM
you have to strictly follow the guide i posted you..
So you need VNS-L23C212 rollback package then
extract update.app, create a "dload" folder in SD and
pur in it. Turn off and proceed with three buttons method*****
When finished you will have C900 firmware..
(that's a LIMBO firmware)
Delete update.app from SD card...(not dload folder)
Now take tour VNL-L23C212Bxxx firmware,
extract update.app, put in dload folder in SD card
and repeat with three buttons metod.
If all take right direction at end of flash, after booting,
reboot to e-recovery (vol up+ power button) and make a factory reset. Now you have MM firmware..
That's the guide say...
*****= vol up+vol down+power button until It start flashing
That's all my friend...
The other way is to flash L23C212 oeminfo.zip (if you find It)
with TWRP, then VNS-L23C212Bxxx with dload and three
button method. At the end factory reset..
Best regards

same problem,
Dadditz said:
Hello man,
really dont know if i badly explained..
My friend to bring back to MM
you have to strictly follow the guide i posted you..
So you need VNS-L23C212 rollback package then
extract update.app, create a "dload" folder in SD and
pur in it. Turn off and proceed with three buttons method*****
When finished you will have C900 firmware..
(that's a LIMBO firmware)
Delete update.app from SD card...(not dload folder)
Now take tour VNL-L23C212Bxxx firmware,
extract update.app, put in dload folder in SD card
and repeat with three buttons metod.
If all take right direction at end of flash, after booting,
reboot to e-recovery (vol up+ power button) and make a factory reset. Now you have MM firmware..
That's the guide say...
*****= vol up+vol down+power button until It start flashing
That's all my friend...
The other way is to flash L23C212 oeminfo.zip (if you find It)
with TWRP, then VNS-L23C212Bxxx with dload and three
button method. At the end factory reset..
Best regards
Click to expand...
Click to collapse
same problem but it shows update package does not exist.

muhammad22295bilal said:
same problem but it shows update package does not exist.
Click to expand...
Click to collapse
Hello dude please type here your phone model and firmware you're currently using.
Have a happy holidays

unable to mount vendor.
Dadditz said:
Hello dude please type here your phone model and firmware you're currently using.
Have a happy holidays
Click to expand...
Click to collapse
i have installed twrp, creat backup and went on to change the cust to 185 from c432. its bricked , i restored my backup but it went in boot loop with huawei logo, then i want to install coustom rom it said
"failed to mount '/vendor '(invalid argument) "
"failed to mount '/product '(invalid argument) "
its not end yet then i factory reset , restore again this time it doesnt goes to boot loop, but an error message "unable to wipe vendor"
__**** files attached****___

muhammad22295bilal said:
i have installed twrp, creat backup and went on to change the cust to 185 from c432. its bricked , i restored my backup but it went in boot loop with huawei logo, then i want to install coustom rom it said
"failed to mount '/vendor '(invalid argument) "
"failed to mount '/product '(invalid argument) "
its not end yet then i factory reset , restore again this time it doesnt goes to boot loop, but an error message "unable to wipe vendor"
__**** files attached****___
Click to expand...
Click to collapse
Dear user,
I really would like to help you, but do you really want it?
You were stuck on the update problem, you did it on your own and now you have TWRP and backup problems.
Also you did not answer any of my questions,
for me it's ok, but how can someone help you?
Good luck dear ..
Greetings

vns-l21c432 and p9 lite
Dadditz said:
Dear user,
I really would like to help you, but do you really want it?
You were stuck on the update problem, you did it on your own and now you have TWRP and backup problems.
Also you did not answer any of my questions,
for me it's ok, but how can someone help you?
Good luck dear ..
Greetings
Click to expand...
Click to collapse
p9 lite with vns-l21

muhammad22295bilal said:
p9 lite with vns-l21
Click to expand...
Click to collapse
Complete firmware please...
VNS-L21C432B??
TWRP you are using ?
What you're planning to do...
Wish you have a stock firmware / rebrand to C185
or flash a custom roms.

vns-l21c432b504
Dadditz said:
Complete firmware please...
VNS-L21C432B??
TWRP you are using ?
What you're planning to do...
Wish you have a stock firmware / rebrand to C185
or flash a custom roms.
Click to expand...
Click to collapse
the installed frimware was vns-l21c432b504 , then i want to go back to c185 so i installed twrp to make my phone root and to install c185 , it shows error i took restore of backup and phone goes to boot loop with huawei logo, then i again restore failed again. simply i have
p9lite
twrp recovery 3.1.1.0
when i restore my back up at last it shows "unable to wipe vendor" , but when i install other imges file it shows
"unable to mount vendor "
"unable to mount product".
now i just want my working phone back please healp

muhammad22295bilal said:
the installed frimware was vns-l21c432b504 , then i want to go back to c185 so i installed twrp to make my phone root and to install c185 , it shows error i took restore of backup and phone goes to boot loop with huawei logo, then i again restore failed again. simply i have
p9lite
twrp recovery 3.1.1.0
when i restore my back up at last it shows "unable to wipe vendor" , but when i install other imges file it shows
"unable to mount vendor "
"unable to mount product".
now i just want my working phone back please healp
Click to expand...
Click to collapse
Hello dear,
We will try to make your last one work
system, ie the L21C432B504.
Do you still have access to the system?
Do you have access to TWRP?
Do you have access to fastboot?
You have tried to install the oeminfo file
and this may have closed the bootloader,
so I invite you first, even if it says that it is unlocked, to re-unlock it,
but not before you have made backups of your stuff, as a factory reset will be done.
Reply me when you ready ...

here is your answers brother.
Dadditz said:
Hello dear,
We will try to make your last one work
system, ie the L21C432B504.
Do you still have access to the system?
Do you have access to TWRP?
Do you have access to fastboot?
You have tried to install the oeminfo file
and this may have closed the bootloader,
so I invite you first, even if it says that it is unlocked, to re-unlock it,
but not before you have made backups of your stuff, as a factory reset will be done.
Reply me when you ready ...
Click to expand...
Click to collapse
no access to system,
access to twrp
access to fasatboot
bootloader and phone both unlocked.

muhammad22295bilal said:
no access to system,
access to twrp
access to fasatboot
bootloader and phone both unlocked.
Click to expand...
Click to collapse
Ok dude reboot to fastboot and
unlock again your bootloader.
After factory reset see if have access to system...
Tell me...

no access to system.
Dadditz said:
Ok dude reboot to fastboot and
unlock again your bootloader.
After factory reset see if have access to system...
Tell me...
Click to expand...
Click to collapse
after unlock bootloader , cant access to system