Please help - I have an unuseful phone right now.
I'm trying to update from 4.2.2 -> 4.3 using Odin software. I've tried several versions of Odin - but they all fail with following error:
*****
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9506XXUBML5_I9506FTMBML1_I9506XXUBMK7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sbl1.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> aboot.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> modem.bin
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> FAIL! (Size)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
*****
After that my phone does not work, it will only boot to screen saying "Odin mode" ....... "UDC START".
The firmware is downloaded from sammobile.com: I9506XXUBML5_I9506FTMBML1_I9506XXUBMK7_HOME.tar.md5
I have to mention that I come from Denmark and the firmware is meant for "France (Orange)" - version 4.3 is not yet released for other european countries.
Afterwards I've also tried to reinstall 4.2.2 - but this one fails with following error:
*****
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> HOME_I9506XXUAMI3_I9506NEEAMI1_I9506XXUAMHD.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
*****
Sorry for putting same thread in two forums - was not able to move the first one.
Odin failed while updating to KitKat. I don't understand it as I have flashed roms before. Can anybody help on the message or what to do to restore it? It seems to be failing on a size issue but the MD5 checks are correct.
<ID:0/046> Removed!!
<ID:0/046> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENA7_N9005DTMENA2_N9005XXUENA2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/046> Odin v.3 engine (ID:46)..
<ID:0/046> File analysis..
<ID:0/046> SetupConnection..
<ID:0/046> Initialzation..
<ID:0/046> Get PIT for mapping..
<ID:0/046> Firmware update start..
<ID:0/046> SingleDownload.
<ID:0/046> aboot.mbn
<ID:0/046> NAND Write Start!!
<ID:0/046> sbl1.mbn
<ID:0/046> rpm.mbn
<ID:0/046> tz.mbn
<ID:0/046> sdi.mbn
<ID:0/046> NON-HLOS.bin
<ID:0/046> boot.img
<ID:0/046> recovery.img
<ID:0/046> system.img.ext4
<ID:0/046> modem.bin
<ID:0/046> cache.img.ext4
<ID:0/046> hidden.img.ext4
<ID:0/046> FAIL! (Size)
<ID:0/046>
<ID:0/046> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
ALD2355 said:
Odin failed while updating to KitKat. I don't understand it as I have flashed roms before. Can anybody help on the message or what to do to restore it? It seems to be failing on a size issue but the MD5 checks are correct.
<ID:0/046> Removed!!
<ID:0/046> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENA7_N9005DTMENA2_N9005XXUENA2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/046> Odin v.3 engine (ID:46)..
<ID:0/046> File analysis..
<ID:0/046> SetupConnection..
<ID:0/046> Initialzation..
<ID:0/046> Get PIT for mapping..
<ID:0/046> Firmware update start..
<ID:0/046> SingleDownload.
<ID:0/046> aboot.mbn
<ID:0/046> NAND Write Start!!
<ID:0/046> sbl1.mbn
<ID:0/046> rpm.mbn
<ID:0/046> tz.mbn
<ID:0/046> sdi.mbn
<ID:0/046> NON-HLOS.bin
<ID:0/046> boot.img
<ID:0/046> recovery.img
<ID:0/046> system.img.ext4
<ID:0/046> modem.bin
<ID:0/046> cache.img.ext4
<ID:0/046> hidden.img.ext4
<ID:0/046> FAIL! (Size)
<ID:0/046>
<ID:0/046> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Looks to me like you need a PIT file. What variant are you running?
We are using Odin 3.09 and the tar file as above.
I don't think you need a pit file , have you re tried the odin flash ?
I used the polish NB3 version (multi csc)
It works on my BTU N9005
Sent from my SM-N9005 using xda app-developers app
---------- Post added at 10:34 PM ---------- Previous post was at 10:26 PM ----------
http://forum.xda-developers.com/showthread.php?p=50201265
Try the Poland multi csc
Sent from my SM-N9005 using xda app-developers app
There is no PIT file in the download from Sammobile. There is only one file for the PDA/PIT.
I have downloaded and tried a second copy and get the same as it gets to the end of the first section
<ID:0/046> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENB4_N9005DBTENB1_N9005XXUENB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/046> Odin v.3 engine (ID:46)..
<ID:0/046> File analysis..
<ID:0/046> SetupConnection..
<ID:0/046> Initialzation..
<ID:0/046> Get PIT for mapping..
<ID:0/046> Firmware update start..
<ID:0/046> SingleDownload.
<ID:0/046> sbl1.mbn
<ID:0/046> NAND Write Start!!
<ID:0/046> aboot.mbn
<ID:0/046> rpm.mbn
<ID:0/046> tz.mbn
<ID:0/046> sdi.mbn
<ID:0/046> NON-HLOS.bin
<ID:0/046> boot.img
<ID:0/046> recovery.img
<ID:0/046> system.img.ext4
<ID:0/046> modem.bin
<ID:0/046> cache.img.ext4
<ID:0/046> hidden.img.ext4
<ID:0/046> FAIL! (Size)
<ID:0/046>
<ID:0/046> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
ALD2355 said:
There is no PIT file in the download from Sammobile. There is only one file for the PDA/PIT.
Thanks for your help on this - this worked with the PIT file in place
Click to expand...
Click to collapse
ALD2355 said:
Odin failed while updating to KitKat. I don't understand it as I have flashed roms before. Can anybody help on the message or what to do to restore it? It seems to be failing on a size issue but the MD5 checks are correct.
<ID:0/046> Removed!!
<ID:0/046> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENA7_N9005DTMENA2_N9005XXUENA2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/046> Odin v.3 engine (ID:46)..
<ID:0/046> File analysis..
<ID:0/046> SetupConnection..
<ID:0/046> Initialzation..
<ID:0/046> Get PIT for mapping..
<ID:0/046> Firmware update start..
<ID:0/046> SingleDownload.
<ID:0/046> aboot.mbn
<ID:0/046> NAND Write Start!!
<ID:0/046> sbl1.mbn
<ID:0/046> rpm.mbn
<ID:0/046> tz.mbn
<ID:0/046> sdi.mbn
<ID:0/046> NON-HLOS.bin
<ID:0/046> boot.img
<ID:0/046> recovery.img
<ID:0/046> system.img.ext4
<ID:0/046> modem.bin
<ID:0/046> cache.img.ext4
<ID:0/046> hidden.img.ext4
<ID:0/046> FAIL! (Size)
<ID:0/046>
<ID:0/046> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
hv a look a this http://forum.xda-developers.com/showthread.php?t=2643572
Are trying to flash a carrier rom, it seems there's a problem when trying to flash these...
The reason I ask is carrier roms generally have the "hidden" partition and it almost always screws up there...
ultramag69 said:
Are trying to flash a carrier rom, it seems there's a problem when trying to flash these...
The reason I ask is carrier roms generally have the "hidden" partition and it almost always screws up there...
Click to expand...
Click to collapse
Thanks for the help in getting me out of the mess. I used these links:
Pit: http://forum.xda-developers.com/showpost.php?p=50614669&postcount=77
Files: http://forum.xda-developers.com/showthread.php?p=50201265
ALD2355 said:
There is no PIT file in the download from Sammobile. There is only one file for the PDA/PIT.
I have downloaded and tried a second copy and get the same as it gets to the end of the first section
<ID:0/046> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUENB4_N9005DBTENB1_N9005XXUENB1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/046> Odin v.3 engine (ID:46)..
<ID:0/046> File analysis..
<ID:0/046> SetupConnection..
<ID:0/046> Initialzation..
<ID:0/046> Get PIT for mapping..
<ID:0/046> Firmware update start..
<ID:0/046> SingleDownload.
<ID:0/046> sbl1.mbn
<ID:0/046> NAND Write Start!!
<ID:0/046> aboot.mbn
<ID:0/046> rpm.mbn
<ID:0/046> tz.mbn
<ID:0/046> sdi.mbn
<ID:0/046> NON-HLOS.bin
<ID:0/046> boot.img
<ID:0/046> recovery.img
<ID:0/046> system.img.ext4
<ID:0/046> modem.bin
<ID:0/046> cache.img.ext4
<ID:0/046> hidden.img.ext4
<ID:0/046> FAIL! (Size)
<ID:0/046>
<ID:0/046> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
DBT NB4 is faulty. Pit file error.
XEF NB4 works just fine. At least on unbranded phones
Sent from my SM-N9005 using Tapatalk
mikkelrev69 said:
DBT NB4 is faulty. Pit file error.
XEF NB4 works just fine. At least on unbranded phones
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Thanks for the reply. It works with th PIT file. There is no note on the download site so that's why I posted the links above as other people will experience the same problem as me.
ALD2355 said:
Thanks for the help in getting me out of the mess. I used these links:
Pit: http://forum.xda-developers.com/showpost.php?p=50614669&postcount=77
Files: http://forum.xda-developers.com/showthread.php?p=50201265
Click to expand...
Click to collapse
No problem, happy you're back up and running... :good:
Hi everyone,
I have a galaxy s4 i9505 LTE and i had "i9505 XXUGNF1 4.4.2 Stock Firmware" installed.
I try to flash new Stock rom "I9505VJUGNI2_I9505ZTOGNI2_ZTO" but it failed. and said "Complete(Write) operation failed"
Now I try to reinstall the previous "i9505 XXUGNF1" but in middle of flashing following message appeared.
------------------------------------------------
<ID:0/010> Added!!
<ID:0/010> Removed!!
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUGNF1_I9505OXAGNF1_I9505XXUGNF1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin v.3 engine (ID:10)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SingleDownload.
<ID:0/010> aboot.mbn
<ID:0/010> NAND Write Start!!
<ID:0/010> sbl1.mbn
<ID:0/010> sbl2.mbn
<ID:0/010> sbl3.mbn
<ID:0/010> rpm.mbn
<ID:0/010> tz.mbn
<ID:0/010> boot.img
<ID:0/010> recovery.img
<ID:0/010> system.img.ext4
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/010> Removed!!
<ID:0/010> Added!!
-----------------------------------------------------------
please help, My phone is now soft break and stuck on "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again." message
martikp said:
<ID:0/010> system.img.ext4
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
It could be a damaged .tar.md5 file. Download it again from another source. I recommend you to download it at "sammobile.com"
i got this error
<ID:0/015> Removed!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGNI4_N9005AUTGNJ1_N9005XXUGNI3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/016> Added!!
<ID:0/016> Odin v.3 engine (ID:16)..
<ID:0/016> File analysis..
<ID:0/016> SetupConnection..
<ID:0/016> Initialzation..
<ID:0/016> Get PIT for mapping..
<ID:0/016> Firmware update start..
<ID:0/016> sbl1.mbn
<ID:0/016> NAND Write Start!!
<ID:0/016> aboot.mbn
<ID:0/016> rpm.mbn
<ID:0/016> tz.mbn
<ID:0/016> sdi.mbn
<ID:0/016> NON-HLOS.bin
<ID:0/016> boot.img
<ID:0/016> recovery.img
<ID:0/016> system.img.ext4
<ID:0/016> modem.bin
<ID:0/016> cache.img.ext4
<ID:0/016> hidden.img.ext4
<ID:0/016> FAIL! (Size)
<OSM> All threads completed. (succeed 0 / failed 1)
what should i do? help me...
Hello, I update my samsung s5 SM-G900F to stock firmware - G900FXXU1BOA3_G900FOXA1BOA4_BTU
And now i cant install anything via Odin, just the same firmware. Cant install twrp or root, trying to install G900FDXU1BOA2_G900FOLB1BOA2_G900FDXU1BNL1 but i get error at the last sec.
Here's the log:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G900FDXU1BOA2_G900FOLB1BOA2_G900FDXU1BNL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> modem.bin
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> FAIL! (Ext4)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Download Mode error in attached file
just installed G900FXXU1BOB7_G900FOXA1BOB7_BTU and it works as good as G900FXXU1BOA3.
is there any way to root G900FXXU1BOB7 ?
with autoroot i get failed. heres the log:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-klte-kltexx-smg900f.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
Help please :\