Lineage 15.1 does not boot - OnePlus 2 Q&A, Help & Troubleshooting

So, i've installed Lineage 15.1 and GApps following the instructions provided in the oneplus2 wiki.
However, when pressing reboot I see the Lineage logo and then I'm asked for my pattern. After entering a (it does not have to be the right one, but the right one works neither) pattern two times I get the following message:
"Decryption unsuccessful:
The password that you entered is correct, but unfortunately your data is corrupt.
To resume using your phone, you need to perform a factory reset. When you set up your phone after the reset, you'll have an opporturnity to restore any data that was backed up to your Google account."
When I click on "Reset Phone" it boots to TWRP again and performs said reset. But when booting again, the pattern still does not work.
Any help would be appreciated.

It seems I have discovered the problem. Apparently, I had to format the /data partition as well (not just wipe it) and now everything seems to fine.
Could someone update the guide to avoid further confusion?

Azulath said:
It seems I have discovered the problem. Apparently, I had to format the /data partition as well (not just wipe it) and now everything seems to fine.
Could someone update the guide to avoid further confusion?
Click to expand...
Click to collapse
One other issue just to check on. Are you running the latest TWRP? It makes a big difference.

shonkin said:
One other issue just to check on. Are you running the latest TWRP? It makes a big difference.
Click to expand...
Click to collapse
Yeah, I'm already on the newest version. As mentioned above it was fixed by formatting the/data partition.

Related

[Q] Can't wipe or factory reset encrypted phone

I made the mistake of encrypting my phone and am now paying the price. It is rooted and I had installed the Google Edition 4.4.2 ROM by Danvdh, Kryten2k35 & Ktoonsez. I'm using TWRP 2.7.0.1.
I first tried going into recovery and doing a factory reset and got the an "Unable to mount '/data'" error, followed by a big red FAIL. So I rebooted into the system and tried to do a factory reset from there. Went through all the steps, phone rebooted into recovery and I got the same error - unable to mount.
So I did a bit of searching on the forums here and someone had suggested using the format option in TWRP. So I did that and it seemed to work - did not get the dreaded unable to mount error. So I tried flashing the new rom (the updated version from a couple of weeks ago). Got a message indicating it was successful. Rebooted, and to my dismay, got the prompt for the encryption password. Saw the little line drawing Android, then... nothing - I found myself in brick land.
Managed to get back into TWRP and, based on another post I found, tried Advanced Wipe, selecting everything except Micro SDcard and USB-OTG. Tried installing the new ROM again, says successful, but nothing has changed - I still boot into blackness after inputting my encryption password.
Not sure what else to try. Any suggestions would be most appreciated.
not_su said:
I made the mistake of encrypting my phone and am now paying the price. It is rooted and I had installed the Google Edition 4.4.2 ROM by Danvdh, Kryten2k35 & Ktoonsez. I'm using TWRP 2.7.0.1.
I first tried going into recovery and doing a factory reset and got the an "Unable to mount '/data'" error, followed by a big red FAIL. So I rebooted into the system and tried to do a factory reset from there. Went through all the steps, phone rebooted into recovery and I got the same error - unable to mount.
So I did a bit of searching on the forums here and someone had suggested using the format option in TWRP. So I did that and it seemed to work - did not get the dreaded unable to mount error. So I tried flashing the new rom (the updated version from a couple of weeks ago). Got a message indicating it was successful. Rebooted, and to my dismay, got the prompt for the encryption password. Saw the little line drawing Android, then... nothing - I found myself in brick land.
Managed to get back into TWRP and, based on another post I found, tried Advanced Wipe, selecting everything except Micro SDcard and USB-OTG. Tried installing the new ROM again, says successful, but nothing has changed - I still boot into blackness after inputting my encryption password.
Not sure what else to try. Any suggestions would be most appreciated.
Click to expand...
Click to collapse
Can you go into download mode, revert back to a stock rom (or flash a stock one or something) and turn encryption off? edit: on further research it looks like the only way to completely unencrypt is to reset your device. dunno if that's something you'd want to try, but considering you already wiped multiple times.. i'd say try it?
Also what carrier do you have? That's pretty important. AT&Ts i337 and Verizon's variant cannot flash AOSP roms (more specifically, kernels) due to the bootloader being locked. That might be the issue you're experiencing? I looked up the ROM and it's using ktoonsez kernel, so I imagine that'd be why. Someone just made a version that does not include the kernel and has multiple issues the ROM you're trying to use fixed here.
Rhymey said:
Can you go into download mode, revert back to a stock rom (or flash a stock one or something) and turn encryption off? edit: on further research it looks like the only way to completely unencrypt is to reset your device. dunno if that's something you'd want to try, but considering you already wiped multiple times.. i'd say try it?
Thanks - that's exactly what I've been trying to do. I haven't tried reflashing back to stock with Odin though. Hmmm...
Also what carrier do you have? That's pretty important. AT&Ts i337 and Verizon's variant cannot flash AOSP roms (more specifically, kernels) due to the bootloader being locked. That might be the issue you're experiencing? I looked up the ROM and it's using ktoonsez kernel, so I imagine that'd be why. Someone just made a version that does not include the kernel and has multiple issues the ROM you're trying to use fixed here.
Click to expand...
Click to collapse
Bell, up here in the Great White North. I don't think locked bootloader is an issue - I was on the previous version of Danvdh's ROM, and everything was hunkydory. I just made the unfortunate decision to encrypt. Big mistake.
May try flashing back to stock. Nothing to lose, at this stage...
Thanks!
Hey just wanted to mention for the benefit of anyone else who got into this bind, flashing back to stock using Odin did the trick. Still wouldn't boot, but then I rebooted into stock recovery and did a factory reset, and finally was able to reboot back into stock. What a nightmare. Ugh. Thanks for the tip though - never occurred to me to try to go back to stock. Lesson learned though - no more encryption for me!
not_su said:
Hey just wanted to mention for the benefit of anyone else who got into this bind, flashing back to stock using Odin did the trick. Still wouldn't boot, but then I rebooted into stock recovery and did a factory reset, and finally was able to reboot back into stock. What a nightmare. Ugh. Thanks for the tip though - never occurred to me to try to go back to stock. Lesson learned though - no more encryption for me!
Click to expand...
Click to collapse
Good to hear. Should be able to flash to the rom once again no problem now that it's unencrypted!

[i9505] Cannot enter Recovery after Format Data

My i9505 was running stock KitKat from Samsung and I tried to install CM13 ROM.
So I used Odin to root the phone and installed TWRP 2.8.6.0. After that I flashed the CM13 ROM and the Gapps Nano.
I got as far as rebooting into CM13. But then the "Google Play Store has stopped working" message keeps popping up starting from the initial setup phase. I ignored the message and went on to setup the wifi but couldn't progress any further. The wifi was detected and connected but then it was stuck on the Checking Connection/Software Update step.
I tried to reflash the rom and gapps again to no avail. The third time to Format Data from TWRP before reflashing - still didn't make a difference.
What's worst is now I cannot even get into TWRP! Whenever I press Vol Up + Power + Home, it will show the small 'entering recovery' message momentarily on the top left corner but then it phone simply restarted again.
I tried re-flashing TWRP using Odin, but still didn't work.
I'm stuck now, cannot get into the OS nor the recovery. Any suggestion as to what to do?
Thank you.
vizavalk said:
My i9505 was running stock KitKat from Samsung and I tried to install CM13 ROM.
So I used Odin to root the phone and installed TWRP 2.8.6.0. After that I flashed the CM13 ROM and the Gapps Nano.
I got as far as rebooting into CM13. But then the "Google Play Store has stopped working" message keeps popping up starting from the initial setup phase. I ignored the message and went on to setup the wifi but couldn't progress any further. The wifi was detected and connected but then it was stuck on the Checking Connection/Software Update step.
I tried to reflash the rom and gapps again to no avail. The third time to Format Data from TWRP before reflashing - still didn't make a difference.
What's worst is now I cannot even get into TWRP! Whenever I press Vol Up + Power + Home, it will show the small 'entering recovery' message momentarily on the top left corner but then it phone simply restarted again.
I tried re-flashing TWRP using Odin, but still didn't work.
I'm stuck now, cannot get into the OS nor the recovery. Any suggestion as to what to do?
Thank you.
Click to expand...
Click to collapse
Format Data from twrp sometime corrupts the file system and brick the phone. (It's happened to me once)
The best way is to flash official firmware via odin and start from there.
I see - I'll try re-flashing the official rom. Btw, would you recommend CWM recovery instead then? Honestly, I'm not very proficient with this whole thing. The reason why I formatted was because I still could see all of my old folders in the phone memory. So I thought Factory Reset didn't really clean up my old rom data.
What do I have to do if I want to start with a really clean slate with CM13 (after reflashing the official one first)?
Also, I still have the issue of CM13 setup being stuck at the Software Update step (right after Wifi setup). Any clue why that happened?
Thanks for taking the time to reply.
vizavalk said:
I see - I'll try re-flashing the official rom. Btw, would you recommend CWM recovery instead then? Honestly, I'm not very proficient with this whole thing. The reason why I formatted was because I still could see all of my old folders in the phone memory. So I thought Factory Reset didn't really clean up my old rom data.
What do I have to do if I want to start with a really clean slate with CM13 (after reflashing the official one first)?
Also, I still have the issue of CM13 setup being stuck at the Software Update step (right after Wifi setup). Any clue why that happened?
Thanks for taking the time to reply.
Click to expand...
Click to collapse
CWM is outdated. Your best bet is TWRP. Try version 3.0.0.
Factory reset doesn't wipe your internal memory, if that's what you mean, you will have to do it manually.
Also, I recommend wiping data, cache, dalvik and system partitions manually from the advanced wipe menu. Factory reset only wipes data and caches, not system.
Oh, and about that stuck at setup issue, just skip that step if possible, you can still change that crap later
If you are unable to set up the ROM, you could flash back to a completely stock ROM and start over.
OK, I'm back on stock Android now.
Before I try flashing CM13 again, I just need suggestions about these two issues I had from previous try:
Unfortunately, Google Play Store has stopped
I have searched for similar issues but can't quite pinpoint the cause. I used the correct GApps for my device and I also removed my SD card prior to installing.
Stuck on Check Connection/Software Update step
Last time I was stuck at this point and, responding to GDReaper, this step couldn't be skipped. The option was grayed out.
vizavalk said:
OK, I'm back on stock Android now.
Before I try flashing CM13 again, I just need suggestions about these two issues I had from previous try:
Unfortunately, Google Play Store has stopped
I have searched for similar issues but can't quite pinpoint the cause. I used the correct GApps for my device and I also removed my SD card prior to installing.
Stuck on Check Connection/Software Update step
Last time I was stuck at this point and, responding to GDReaper, this step couldn't be skipped. The option was grayed out.
Click to expand...
Click to collapse
The sd card has nothing to do with it.
Sometimes gapps don't work on certain roms.
Just try another package.
If you use A-Gapps, the whole first time setup step will be skipped altogether. So that means that you won't run into the risk of getting stuck at that step again.
Or, after flashing the rom, you could use the recovery file manager to delete the setupwizard.apk after you flashed gapps. That should also prevent the initial setup process from initializing at first boot.
vizavalk said:
OK, I'm back on stock Android now.
Before I try flashing CM13 again, I just need suggestions about these two issues I had from previous try:
Unfortunately, Google Play Store has stopped
I have searched for similar issues but can't quite pinpoint the cause. I used the correct GApps for my device and I also removed my SD card prior to installing.
Stuck on Check Connection/Software Update step
Last time I was stuck at this point and, responding to GDReaper, this step couldn't be skipped. The option was grayed out.
Click to expand...
Click to collapse
You probably used Opengapps. That also gives me a lot of errors.
Use Bankgs Gapps instead. They always work for me.
http://download.dirtyunicorns.com/files/gapps/banks_gapps/
GDReaper said:
The sd card has nothing to do with it.
Sometimes gapps don't work on certain roms.
Just try another package.
If you use A-Gapps, the whole first time setup step will be skipped altogether. So that means that you won't run into the risk of getting stuck at that step again.
Or, after flashing the rom, you could use the recovery file manager to delete the setupwizard.apk after you flashed gapps. That should also prevent the initial setup process from initializing at first boot.
Click to expand...
Click to collapse
I used Open GApps, as was recommended in the CM13 post. So are you saying that my two issues were caused solely by the GApps? Because I thought me being stuck at Software Update was due to something else.
Lennyz1988 said:
You probably used Opengapps. That also gives me a lot of errors.
Use Bankgs Gapps instead. They always work for me.
http://download.dirtyunicorns.com/files/gapps/banks_gapps/
Click to expand...
Click to collapse
There are two files - one says Dynamic. But the file sizes are exactly the same. Is there any difference?
vizavalk said:
I used Open GApps, as was recommended in the CM13 post. So are you saying that my two issues were caused solely by the GApps? Because I thought me being stuck at Software Update was due to something else.
There are two files - one says Dynamic. But the file sizes are exactly the same. Is there any difference?
Click to expand...
Click to collapse
Not that I know. Just pick the one without Dynamic.
vizavalk said:
I used Open GApps, as was recommended in the CM13 post. So are you saying that my two issues were caused solely by the GApps? Because I thought me being stuck at Software Update was due to something else.
Click to expand...
Click to collapse
The initial setup process is related to gapps. And I don't recall there being any software update requests during the initial setup. It tells me to wait while it scans for network and WiFis, but I always skip those steps.
Open gapps sometimes work and sometimes they don't. It varies from day to day, since they are updated daily.
Just find a gapps package that works and stick to it until another version of android.
I just want to report back that my CM13 works perfectly with Banks GApps. Thanks to everyone who has helped!

"Decryption unsuccessful" message on stock 7.0/7.1.1

This is the second time I get this message. First time was on stock Android 7.0. next time, ~2 weeks later on stock Android 7.1.1. To revive my phone I had to perform a factory reset twice.
What causes this message? Is it software or hardware related? I assumed the former, but the fact that it happened twice after a reset and on a new version made me wonder...
I'm heading to a country without 3G coverage and barely any WiFi, so if this happens then, I'm screwed on 2 levels: -Loss of pictures, due to not able to back-up -Not able to reset, since that requires WiFi.
Anyone else who had this issue? Any recommendations, RMA?
Full error message: "Decryption unsuccessful" The password that you entered is correct but unfortunately your data is corrupt. To resume using your phone, you need to perform a factory reset. When you set up your phone after the reset, you'll have an opportunity to restore any data that was backed up to your Google account"
Thx.
You can set the phone to back up without wifi if you are good with that I've had my phone since December I have not had that happen odd.
Sent from my Nexus 6P using Tapatalk
gjkrisa said:
You can set the phone to back up without wifi if you are good with that I've had my phone since December I have not had that happen odd.
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
And how would you do that? Can't seem to find any way to do that...
In Google photos there is in settings also drive after that I believe the rest of settings will back up w/o wifi I know photos will
Sent from my Nexus 6P using Tapatalk
Dytoonn said:
This is the second time I get this message. First time was on stock Android 7.0. next time, ~2 weeks later on stock Android 7.1.1. To revive my phone I had to perform a factory reset twice.
What causes this message? Is it software or hardware related? I assumed the former, but the fact that it happened twice after a reset and on a new version made me wonder...
I'm heading to a country without 3G coverage and barely any WiFi, so if this happens then, I'm screwed on 2 levels: -Loss of pictures, due to not able to back-up -Not able to reset, since that requires WiFi.
Anyone else who had this issue? Any recommendations, RMA?
Full error message: "Decryption unsuccessful" The password that you entered is correct but unfortunately your data is corrupt. To resume using your phone, you need to perform a factory reset. When you set up your phone after the reset, you'll have an opportunity to restore any data that was backed up to your Google account"
Thx.
Click to expand...
Click to collapse
Did you experience any random reboots?
When you say stock you confirm that it's full stock (no root and running google's kernel) ?
rchtk said:
Did you experience any random reboots?
When you say stock you confirm that it's full stock (no root and running google's kernel) ?
Click to expand...
Click to collapse
Never had any troubles with random reboots.
My phone froze, got unresponsive. I had to restart, and when it tried to boot I got this message. This happened twice.
No root, standard kernel. Bootloader not even unlocked.
Dytoonn said:
Never had any troubles with random reboots.
My phone froze, got unresponsive. I had to restart, and when it tried to boot I got this message. This happened twice.
No root, standard kernel. Bootloader not even unlocked.
Click to expand...
Click to collapse
That's it. Storage corruption and the decryption unsuccessful is a consequence of your problem.
Sorry but that looks like a defective device.
ram/emmc/power, it's hard to find without root/twrp. Unless an update got wrong but I don't think that would show these symptoms.
First, I would also raise a PR on google to see what they suggest: https://source.android.com/source/report-bugs.html
You really need to backup your data and have a backup phone in case the following gets you a brick..
I'd actually try flashing factory images (you won't be able to flash recovery image but others yes ). Make sure to record the messages returned on your PC to see if something went wrong. The update process is a bit dumb, it goes on even if errors are encountered so even if it finishes it doesn't mean much.
Once the device is flashed, if it boots, you could try filling your data partition by moving big files using usb transfer. When its full, reboot and see what's happening.
If you are short on time, prepare the RMA process...
edit: oh btw, I'm sure people would be interested to get the information displayed in bootloader mode (power on the phone by pressing volume down)
rchtk said:
That's it. Storage corruption and the decryption unsuccessful is a consequence of your problem.
Sorry but that looks like a defective device.
ram/emmc/power, it's hard to find without root/twrp. Unless an update got wrong but I don't think that would show these symptoms.
First, I would also raise a PR on google to see what they suggest: https://source.android.com/source/report-bugs.html
You really need to backup your data and have a backup phone in case the following gets you a brick..
I'd actually try flashing factory images (you won't be able to flash recovery image but others yes ). Make sure to record the messages returned on your PC to see if something went wrong. The update process is a bit dumb, it goes on even if errors are encountered so even if it finishes it doesn't mean much.
Once the device is flashed, if it boots, you could try filling your data partition by moving big files using usb transfer. When its full, reboot and see what's happening.
If you are short on time, prepare the RMA process...
edit: oh btw, I'm sure people would be interested to get the information displayed in bootloader mode (power on the phone by pressing volume down)
Click to expand...
Click to collapse
Thanks for your reply.
I sent it for an RMA, so unfortunately not able to do what you described. Couldn't chance it getting this error message when abroad.
Curious though if they will grant an RMA, nothing much is looking wrong at the moment. Hope they will, because else I'm screwed.
If they don't, though, I'll see if I can get the information displayed in bootloader mode.
I'm having the same issue.
Same message, only I'm BL unlocked, rooted and twrp.
It happened twice. Once on 7.1 DP1, and again on DP2.
Once I get into recovery, the system is encrypted, and I can't do a thing.
I'm going to try and back up to a flash drive, and try to mount that in twrp if it happens again.
rwj5279955 said:
I'm having the same issue.
Same message, only I'm BL unlocked, rooted and twrp.
It happened twice. Once on 7.1 DP1, and again on DP2.
Once I get into recovery, the system is encrypted, and I can't do a thing.
I'm going to try and back up to a flash drive, and try to mount that in twrp if it happens again.
Click to expand...
Click to collapse
Recent Twrp now supports full disk encryption so you should be able to see your files? And even do a backup from there. Take twrp 3.0.2-3
rchtk said:
Recent Twrp now supports full disk encryption so you should be able to see your files? And even do a backup from there. Take twrp 3.0.2-3
Click to expand...
Click to collapse
Strange, that's exactly the version I'm using.
rwj5279955 said:
Strange, that's exactly the version I'm using.
Click to expand...
Click to collapse
Weird. I don't have twrp so I can't check but you should see your data. Maybe the partition needs to be mounted (I think it is by default though). No /data/media ? /sdcard is the same but as a virtualized FAT file system to be able to be access from Windows. Could be that /sdcard is empty in twrp but /data/media shouldn't.
rchtk said:
Weird. I don't have twrp so I can't check but you should see your data. Maybe the partition needs to be mounted (I think it is by default though). No /data/media ? /sdcard is the same but as a virtualized FAT file system to be able to be access from Windows. Could be that /sdcard is empty in twrp but /data/media shouldn't.
Click to expand...
Click to collapse
I'll have to look if it happens again.
I only remember trying to access /sdcard. Empty
https://twrp.me/faq/datamedia.html
Same issue , rooted and twrp noto e4 plus , any help ? Idk what's is going on
Joeykatie said:
Same issue , rooted and twrp noto e4 plus , any help ? Idk what's is going on
Click to expand...
Click to collapse
If I understand this thread flash custom kernel like ElementalX to unencrypt your device.

Phone encrypted but not asking for password on TWRP

Hello, so i was running @xXx 9.1 and i decided to update to 9.2. So I simply dirty flashed (which should normally work) and rebooted. However I was stuck on the booting logo for ages to I bootted back to TWRP to try and reflash, however when I got to TWRP, everything was encrypted (sdcard/ was full of nonsense which looks like encrypted files). However it didn't ask for my password as it usually did and I can't find a single way to manually decrypt. Does anyone know what I can do to not loose ALL my data?! I backup via Titanium Backup as I usually do incase of a data problem but my entire internal storage is not accessible.
Hope someone can help!
just flash stable oos5 firmware+modem, phone should boot and able to decrypt.
Im_Mattgame said:
Hello, so i was running @xXx 9.1 and i decided to update to 9.2. So I simply dirty flashed (which should normally work) and rebooted. However I was stuck on the booting logo for ages to I bootted back to TWRP to try and reflash, however when I got to TWRP, everything was encrypted (sdcard/ was full of nonsense which looks like encrypted files). However it didn't ask for my password as it usually did and I can't find a single way to manually decrypt. Does anyone know what I can do to not loose ALL my data?! I backup via Titanium Backup as I usually do incase of a data problem but my entire internal storage is not accessible.
Hope someone can help!
Click to expand...
Click to collapse
same problem any answer?
Suraxit said:
same problem any answer?
Click to expand...
Click to collapse
What version of TWRP are you running. This is an old thread.

Stuck at boot screen animation... was working fine!

I'm not sure what happened with my US Axon 7. I was getting it ready to give to my son, and now it won't boot. Even with a full wipe (including system) and reinstall of the OS. It tries to boot, but just sits at the Google animation forever.
Here is basically the steps of what happened during the wipe/install of the unofficial RR Oreo build:
- Wiped everything
- Flashed the B32+B10 bootstack (A2017X_BootStack_B32+B10.zip)
- Flashed the latest (at the time) unofficial RR Oreo build (RR-O-v6.0.0-20180511-axon7-Unofficial.zip)
- Flashed opengapps micro (open_gapps-arm64-8.1-micro-20180512.zip)
- Flashed Magisk 16.0 (Magisk-v16.0.zip)
- Booted up and setup the phone for his google account
- Rebooted multiple times during setup
- Installed TiBu and froze the apps I normally freeze for the kids.... things they don't need
- Rebooted one final time and got stuck on the boot screen
- Re-performed steps above (minus setup... because I still can't get it to boot)
The best I can figure is that I froze something I shouldn't have... but a wipe and reinstall should have fixed that. I don't understand why it wouldn't. I've even wiped system.
I'm going to see if I saved a backup somewhere, as it's not on the phone. I can still get into recovery and such, which is good.
Flapjack said:
I'm not sure what happened with my US Axon 7. I was getting it ready to give to my son, and now it won't boot. Even with a full wipe (including system) and reinstall of the OS. It tries to boot, but just sits at the Google animation forever.
Here is basically the steps of what happened during the wipe/install of the unofficial RR Oreo build:
- Wiped everything
- Flashed the B32+B10 bootstack (A2017X_BootStack_B32+B10.zip)
- Flashed the latest (at the time) unofficial RR Oreo build (RR-O-v6.0.0-20180511-axon7-Unofficial.zip)
- Flashed opengapps micro (open_gapps-arm64-8.1-micro-20180512.zip)
- Flashed Magisk 16.0 (Magisk-v16.0.zip)
- Booted up and setup the phone for his google account
- Rebooted multiple times during setup
- Installed TiBu and froze the apps I normally freeze for the kids.... things they don't need
- Rebooted one final time and got stuck on the boot screen
- Re-performed steps above (minus setup... because I still can't get it to boot)
The best I can figure is that I froze something I shouldn't have... but a wipe and reinstall should have fixed that. I don't understand why it wouldn't. I've even wiped system.
I'm going to see if I saved a backup somewhere, as it's not on the phone. I can still get into recovery and such, which is good.
Click to expand...
Click to collapse
Which apps do you freeze? If you froze some Google apps you can just use the pico package and avoid having to use TiBU entirely
You're saying that after doing the whole installation you set up the ROM, but after you freeze apps with titanium and reboot the phone refuses to boot?
Choose an username... said:
Which apps do you freeze? If you froze some Google apps you can just use the pico package and avoid having to use TiBU entirely
Click to expand...
Click to collapse
I don't remember exactly... nothing I haven't frozen on their phones before.
You're saying that after doing the whole installation you set up the ROM, but after you freeze apps with titanium and reboot the phone refuses to boot?
Click to expand...
Click to collapse
It seems to be that way. I had already installed Magisk, but it's not like I installed Xposed or anything "dangerous" to the operation of the phone. The only thing I can think of is I froze something that kept it from booting. But if that's the case, why wouldn't reinstalling the ROM fix it? Wouldn't that fix anything I changed/froze?
Flapjack said:
I don't remember exactly... nothing I haven't frozen on their phones before.
It seems to be that way. I had already installed Magisk, but it's not like I installed Xposed or anything "dangerous" to the operation of the phone. The only thing I can think of is I froze something that kept it from booting. But if that's the case, why wouldn't reinstalling the ROM fix it? Wouldn't that fix anything I changed/froze?
Click to expand...
Click to collapse
well, if you wiped and installed everything again it should work...
Something must have been wrong with the ROM itself. I don't get it, since it worked fine the first install. I installed AOSP instead and it booted right up. I'm going to take a full backup, freeze the things I normally freeze, then see what happens.
I was having a very similar issue while trying to move to exactly the same ROM. My problem was that I was accidentally encrypting the phone (I didn't realize that this is what the "require pin at startup" prompt was doing). If TWRP is asking you to put in a pin number every time you boot into recovery, then your phone is encrypted. RR ROM (or at least the most common version of it) does not support encryption, so it will refuse to boot.
To get rid of encryption, you have to select the "format data" option in the wipe menu. You can't just wipe the usual partitions.
I can't be certain that this is your issue, but hopefully it helps.
beokabatukaba said:
I was having a very similar issue while trying to move to exactly the same ROM. My problem was that I was accidentally encrypting the phone (I didn't realize that this is what the "require pin at startup" prompt was doing). If TWRP is asking you to put in a pin number every time you boot into recovery, then your phone is encrypted. RR ROM (or at least the most common version of it) does not support encryption, so it will refuse to boot.
To get rid of encryption, you have to select the "format data" option in the wipe menu. You can't just wipe the usual partitions.
I can't be certain that this is your issue, but hopefully it helps.
Click to expand...
Click to collapse
Not similar at all. In your case the ROM would boot fine, but it woupd fail to load your data, so it asks for a password that not necessarily exists. In his case the ROM never gets to boot
Choose an username... said:
Not similar at all. In your case the ROM would boot fine, but it woupd fail to load your data, so it asks for a password that not necessarily exists. In his case the ROM never gets to boot
Click to expand...
Click to collapse
You misunderstand. I could only boot RR once, and if I accidentally encrypted the device during setup or afterward, the next time I tried to restart, it would be stuck on the boot screen. All subsequent reinstalls also got stuck on the boot animation since I wasn't removing encryption even if I wiped data, system, cache, etc. Moving to AEX allowed me to boot with encryption, and it was at that point that I realized my mistake. That sounds precisely like what is happening to flapjack, except that the cause may or may not be the same since he got through multiple boots the first time and presumably had already setup a pin/password on one of the first boots.
Immediately after the pin is setup should be when it asks if you want to require the pin on startup (aka if you want to encrypt), so if he opted to do that after setting everything up rather than on the very first boot, he may have exactly the same issue I had.

Categories

Resources