Hi all,
Ive just recently got an LES1 smartwatch, and whilst it charges fine, I cannot got the laptop to recognise it as a connected device, and nothing appers stating anything is connected. ive searched for drivers everywhere but nothing yet. I am using the dock that came with the device but cant believe that this is only for charging?
Any ideas?
cheers
Related
Hi,
I just sold my xda II mini to one of my friend. A day later, he just gave it back to me saying that the device doesn't work anymore. I asked him about what he did earlier with the phone, and he told me that he just wanna install a software/rom with it (he new to this phone and doesn't sure about what he did earlier). So i give a lil check with the phone and been trying to turn it on and connect it to my computer. The thing is, it's only showing USB v1.00 when it connected to my computer and then I've tried the full reset (when it still connected with the usb cable), it only gave me red light. What should i do now? It's 2 y.o. and the warranty not available anymore.
Cheers,
Luke
Feel like I am banging my head against a brick wall! I have a dell vostrol 1220 (with windows 7 home premium) and I managed to connect my Touch HD to the computer with bluetooth with no problems at all. I could use the computer to listen to music from the phone etc. However the hard drive went on my dell and was replaced. I have installed all the necessary drivers and spent days looking at internet forums and tried just about everything and can still not get the connection to work as before.
It seems that the problem is that the computer cannot download a peripheral device driver for the phone. My guess is that the computer is not picking up the full phone settings (all the phone is visible) and so can then not find a suitable driver, although I might be wrong.
Anyone got any ideas, this is so frustating as it used to work ok.
Hi!
Ive got a big problem cause my Galaxy S just stopped being recognized by any PC. I dont know whats wrong, it just treats USB cable like it was a charger, PC doesnt detect anything neither does the phone. Its very strange since everything worked perfect for the last couple of weeks. I tried to connect it to a notebook i used to flash the phone a week ago and it has been turned off ever since so it cant be any driver related issue. Im afraid my micro-USB port is damaged but i have a custom firmware in it and since i cant reflash it the warranty isnt vaild ehh...
Any ideas?
THX
silly question...
Do you mount the phone via the status bar after you plug it in?
Thats the point - PC doesnt detect the phone AT ALL theres not even a sound that an USB device has been plugged in. The same thing in the phone it just starts charing it doesnt seem to know that its connnected to PC.
sounds like your PC mobo got the USB port fried.
try turning off the PC, unplug the power cord, wait for the energy to drain out, then turning it back on
my Windows 7 x64 some time does that, but it's not a hardware error
on yours it could either be a hardware dead, or the Windows gone Bezerk as usual
I tried different USB devices - other phones, pendrives and a printer and everything works fine except for the Galaxy S. The Samsungs USB cable also works fine with other phones..
I wrote to Samsung and they said to send them the device because its most probably damaged :\ Will they check the firmware version?
btw. as I said in the first post the phone doesnt work on my notebook as well
I wouldnt care so much about this because I can send files using ftp but I cant change the firmware without an USB port working (or am I wrong?)
I sometimes also have this problem. For me rebooting the phone and if it then doesn't work again using another USB port at my PC solves the problem.
Yesterday when the problem occurred for the first time I removed SIM and microSD cards and PC detected a device but it was recognized as 'unknown malfunctioning USB device' but no luck ever since.
Just to let you know my Samsung just fixed itself 0_o Might have something to do with the Windows reinstallation on my PC but it suddely works on my notebook as well. Im really confused now...
Hi Guys
I recently acquired one of the 10.1 LE's and immediately ran into problems with my PC refusing to recognize the Tab. I searched high and low for a solution, including installing Kies, the USB drivers and ever other mad trick people suggested, but nothing worked.
What made this even worse was the Tab would charge while plugged into the PC, so the cable must have been working... well that assumption was wrong, read on.
I live in the UK and the Tab 10.1 is not available here yet, but I realised the 7" Tab appeared to have the same charger and usb cable, so I took a chance and purchased one of these, suddenly everything started working and my PC picks up the tab.
So the moral of the story is, if your does not work neither, try a different cable
What do to when one only has one cable. Where might I get another? Have tried to connect to two different computers already. Tab give notification but no reaction from computers. Kies will not transfer videos. Will contact Samsung support.
Have already downloaded device usb drivers from Samsung. Let Kies look for drivers but no avail. Any help would be appreciated. Tab showed connect one time, but pc wouldn't react. Window 7 64-bit and XP service pack 3.
Turn off USB Debugging!!!!! You're computer will not recognize your device if debugging is on. Turn it off.
Hi all,
After accidentally bricking a similar device I got Podofo RK-A175 a few days ago just to discover that it cannot be connected to PC via USB. I've been trying for days with different computers and cables and this device doesn't even pop up, it is like it is not sending dat, only receiving. Is this something that is common? My previous unit connected as MT65xx to my Win10 laptop.
Also it cannot enter any sort of Recovery Mode so I can't backup the ROM, can't root it - nothing. It has physical buttons for Power, Home, Back and Navigation. Tried every possible trick here on XDA and absolutely nothing.
Can someone confirm that some of these devices USB's are only working one way?
PS I made sure cables support OTG and tried both MacBook PRO and 2 different Windows 10 computers