Database Users

Anyone find a good screen protector film or glass?

Can't find any ones that I like so far. I know the edge makes things difficult but all the glass one I've seen don't have adhesive all over just along the edge and the film one i bought doesn't stay down on the edge so has anyone found a good one or decent one?
Please specify it's full coverage...glass or film...works with case and of so what case

flimflam06 said:
Can't find any ones that I like so far. I know the edge makes things difficult but all the glass one I've seen don't have adhesive all over just along the edge and the film one i bought doesn't stay down on the edge so has anyone found a good one or decent one?
Please specify it's full coverage...glass or film...works with case and of so what case
Click to expand...
Click to collapse
I try using the screen protector that came with the ghostek case I bought install it cover the entire front area of phone plus edges let set for about an hour try to put case on but everytime I did it would lift off the sides of the screen protector so I just took off the screen protector till I find that works. Also try the supershieldz ones same thing.

This is the one I am going to get https://www.amazon.com/dp/B01G7LQZW...TF8&colid=38DVAL1VV0RQM&coliid=I2N75A0MPNERT6

Omega Ra said:
This is the one I am going to get https://www.amazon.com/dp/B01G7LQZW...TF8&colid=38DVAL1VV0RQM&coliid=I2N75A0MPNERT6
Click to expand...
Click to collapse
I was thinking about that one but im not sure about the wet install. I'm good at putting screen protectors on but I've never did a wet install before...i May have to check it out

If you have some time and patience go for the Invisible Shield hd dry full body coverage. I originally ordered a Naked skin from slickwraps but its been processing since the 18th. So when my N7 arrived today I went on the search around town and ended up in a Verizon store. They kindly put it on for me, took two tries lol. Mid-install the Verizon guy just rips it and balls it up and went to grab another. When I got home I went through the packaging and noticed he skimmed me on the install. and didn't install the back.. I tell you what that was the worst torture in my life but hey pics below! Came out beautiful. +extra dbrand lens laying around conveniently . :good: winning

I put on a IQ shield matte. I like the matte finish but it is not for everyone. There is some lost clarity but much less glare and no fingerprints. I like the wet install for no bubbles and being easy. It takes some time to let the edges dry so they will stick. Let it sit at least overnight before using or putting on a case.
My case (Spigen Ultra Hybrid)did cause the corners to lift, a common problem with cases. IQ Shield has since come out with a "case friendly" updated version that is getting good reviews. I've got one on its way.

Phredeee said:
I put on a IQ shield matte. I like the matte finish but it is not for everyone. There is some lost clarity but much less glare and no fingerprints. I like the wet install for no bubbles and being easy. It takes some time to let the edges dry so they will stick. Let it sit at least overnight before using or putting on a case.
My case (Spigen Ultra Hybrid)did cause the corners to lift, a common problem with cases. IQ Shield has since come out with a "case friendly" updated version that is getting good reviews. I've got one on its way.
Click to expand...
Click to collapse
I ended up buying the skinomi matte screen protector which stuck on the edges perfect. Went without a case for a week and then put the spigen neo hybrid on which is my favorite case of all time and it peeled the corners still. I warmed the screen protector and was able to reform the corners a bit and it helped but i still want a problem free combination

This is the case and glass screen protector that I use. The setup is perfect for me. You could use any screen protector with this case. It also holds the glass ones down and keep them in place.
https://www.amazon.com/dp/B01INYYYDI/ref=cm_sw_r_other_apa_CE9Zxb7RJCJPC
https://www.amazon.com/dp/B01JTYPSLI/ref=cm_sw_r_other_apa_hB9ZxbR2MKR17

duracool said:
This is the case and glass screen protector that I use. The setup is perfect for me. You could use any screen protector with this case. It also holds the glass ones down and keep them in place.
https://www.amazon.com/dp/B01INYYYDI/ref=cm_sw_r_other_apa_CE9Zxb7RJCJPC
https://www.amazon.com/dp/B01JTYPSLI/ref=cm_sw_r_other_apa_hB9ZxbR2MKR17
Click to expand...
Click to collapse
Without clicking the link I'm gonna guess that's the unicorn beetle case. I have that myself and love it. I use the holster while at work

Great case. It works well with a glass screen protector.

I have an armorsuit on this phone, as well as several tablets and phones prior. Was originally skeptical of the curved edge, but it is working great so far. In the past 6 years armorsuits and common sense have kept me from having any cracked screens. And when I upgrade and sell the old phones, removing the armorsuit has always left a perfect as-new screen (but the housings usually have suffered damage from drops, etc.).

Skinomi

duracool said:
This is the case and glass screen protector that I use. The setup is perfect for me. You could use any screen protector with this case. It also holds the glass ones down and keep them in place.
https://www.amazon.com/dp/B01INYYYDI/ref=cm_sw_r_other_apa_CE9Zxb7RJCJPC
https://www.amazon.com/dp/B01JTYPSLI/ref=cm_sw_r_other_apa_hB9ZxbR2MKR17
Click to expand...
Click to collapse
Is your tempered glass screen protector any good? How is the clarity? Sensitivity?

The clarity and sensitivity is great. I have one on my phone and my fiances phone. This is the third one we bought and its pretty close to the flat ones. Just line it up because the cut outs are exact. No room for error.

To those who kept the pre-installed screen protector on. How's it holding up?

Looking to purchase a OP5 here soon. After seeing a few reviews/unboxing videos, I find it pretty great that OnePlus provides a pre-installed screen protector on the OnePlus 5.
While I know it isn't on par with a tempered glass protector, I like the idea of avoiding the hassle of after market protectors and sticking with the pre-installed one. With that in mind I'm curious to hear how the pre-installed protector is holding up for those who opted to keep theirs on.
Thanks for the input!

Had no problems, does what it is supposed to do.
Using a case that closes and covers the screen now but for the 1st week or so I had nothing but the pre-installed protector on which bore the brunt of my keys and other items depositted into my pockets with the Oneplus5..
Don't know about others but it does appear to be a glass screen protector.

It's definitely not glass, that's the first thing. It's fine. Scratched easy, doesn't repair itself. After a few months it'll probably look like a mess but I'm happy it came with one. You can even scratch it with your nail if you feel like trying that out. If it was really great, people wouldn't be trying out all the terrible 3rd party protectors, none of which pass anyone's test so far.

Mine still looks new and holding up well, but the damn thing is a dust magnet. I've never seen anything like it. Got my phone 2 days after launch.

That's what I figured. I know it won't feel as good to the touch as a glass protector but with the new rounded edges that phones have these days, getting a solid glass protector installed with 0 flaws is proving to be impossible. I've experienced this myself with the Pixel. With the S8, I didn't bother with a protector because of how rounded the screen is and the fact that I'm simply leasing it from T-Mobile. However, the S8 already has some nasty scratches in the screen from standard usage. It's brought me to the realization that if I buy another phone outright, a screen protector from day 1 is still a necessity to keep resale value high.
Glad to hear that the pre-applied protector is going to be adequate for at least a few months. I'd rather have to deal with some dust collection and scratches in the protector than scratches on the physical screen on a phone I intend to sell at some point.

The pre-applied screen protector works ok. Obviously not as good as a tgsp but its much better than the bare screen. I left mine on my 1+3 which I had for about 9 months until I sold it to upgrade. Screen was still in excellent condition. Keep it on until when ever a proper tgsp comes out

What brand is tgsp? I just received my rhino shield but haven't installed it yet. The factory one is holding up fine for me. Given, I haven't dropped it yet, so I really can't give an opinion.

ultramag69 said:
Had no problems, does what it is supposed to do.
Using a case that closes and covers the screen now but for the 1st week or so I had nothing but the pre-installed protector on which bore the brunt of my keys and other items depositted into my pockets with the Oneplus5..
Don't know about others but it does appear to be a glass screen protector.
Click to expand...
Click to collapse
What case are you using?

Pre-installed one works fine for me until now.
Tempered glass protectors, those that are available online are really unreliable atm, so unless you want to keep a knife or diamond cutter in your pocket, this protector will do just fine

A few minor scratches appeared on it since now a month I have my OP5 but the original screen protector is holding in place very good.
Only drawback for me, the plastic of this pre-applied protector is a dust and fingerprint magnet (as opposed to the glass screen protectors)

sn0warmy said:
That's what I figured. I know it won't feel as good to the touch as a glass protector but with the new rounded edges that phones have these days, getting a solid glass protector installed with 0 flaws is proving to be impossible. I've experienced this myself with the Pixel. With the S8, I didn't bother with a protector because of how rounded the screen is and the fact that I'm simply leasing it from T-Mobile. However, the S8 already has some nasty scratches in the screen from standard usage. It's brought me to the realization that if I buy another phone outright, a screen protector from day 1 is still a necessity to keep resale value high.
Glad to hear that the pre-applied protector is going to be adequate for at least a few months. I'd rather have to deal with some dust collection and scratches in the protector than scratches on the physical screen on a phone I intend to sell at some point.
Click to expand...
Click to collapse
And oh boy will you want resale value to be high. I sold my 3T for $430 (Bought for $479) before I bought the OP5 on launch day. It should keep value quite well as long as it remains in mint or very good condition.

My screen protector bailed ship after 2 weeks, it peeled off on a corner and from there it got worse. I ripped it off and have been happy since although I'm trying to find a good tempered glass replacement. One thing I noticed only after I removed it is how much dust the original protector had on it. It's a pure dust magnet. So that problem is gone too now.

My OP5 factory install screen protector had a small scratch in it within the first week. On my previous screened devices I'd always used these type of protectors (Tech Amour being my preferred brand) compared with the OP5's was very low quality. I'd recommend leaving it on until better protectors become available.
I've replaced my OP5 protector, after several weeks, with the Orzly tempered glass screen protector and followed the application advise from a user who didn't have any of the issues mentioned about that brand. It's been a week since I've applied it and I've not had any of the issues some have had. I'm very happy with the Orzly and am unlikely to go back to a plastic film protector assuming this one lasts as it is now. See the OP5 Accessories threads for your best discussions on the pros and cons of various protector brands.

Very well actually! I'm quite happy with it and will keep it until it breaks or peel off which does not look to be the case anytime soon. Surely, I dislike the fact that fingerprints keeps being present on it but it's something that gets easily wiped off in my pocket or with my shirt. The protector also enables my fingers to glide on it quite well. So, for now, no need for me to buy a Phantom Glass or something like it. \o/

It sticked fine.. No air gaps on corners

campfred said:
Very well actually! I'm quite happy with it and will keep it until it breaks or peel off which does not look to be the case anytime soon. Surely, I dislike the fact that fingerprints keeps being present on it but it's something that gets easily wiped off in my pocket or with my shirt. The protector also enables my fingers to glide on it quite well. So, for now, no need for me to buy a Phantom Glass or something like it. \o/
Click to expand...
Click to collapse
HatRiGt said:
It sticked fine.. No air gaps on corners
Click to expand...
Click to collapse
I've had the same experience. This is one of the best I've used. The oleophobic layer is great, whenever I pull it out of my pocket it's clear.
All the tgsp I've ever used (except for this brand I cannot remember for my nexus 6p) would have been smudged up and had rainbow glass by now.

MrWilsonxD said:
I've had the same experience. This is one of the best I've used. The oleophobic layer is great, whenever I pull it out of my pocket it's clear.
All the tgsp I've ever used (except for this brand I cannot remember for my nexus 6p) would have been smudged up and had rainbow glass by now.
Click to expand...
Click to collapse
Ah! I do remember seeing some glass screen protectors that had a rainbow effect when wearing sunglasses in my car. I don't have that effect on the stock one.

On my OP3 I took the screen protector off after 2 days because it got immensely smudged but on the OP5 which I've had for a month now the screen protector is still on. It seems to be made of a lot better quality so no reason yet to peel it off.

aenews said:
And oh boy will you want resale value to be high. I sold my 3T for $430 (Bought for $479) before I bought the OP5 on launch day. It should keep value quite well as long as it remains in mint or very good condition.
Click to expand...
Click to collapse
Yeah, with all my previous unlocked phones, I always put a screen protector on the phone immediately after unboxing. Which has allowed me to always sell the phone to cover almost all of the cost of the new one I wanted to purchase. I'll be keeping the pre-applied protector installed on the OnePlus 5 until a solid TG protector is released without issues.
I have absolutely no issue having a scratched up screen protector, knowing that the screen underneath is still perfect.

I left the stock protector on, but it scrathed to he** already. Even though i NEVER put it in the sam epocket as my keys.
Still waiting for a tempered protector that doesnt suck...

[Question] What is a good brand of tempered glass that works and effective?

So the question is probably familiar from past phones from Sammy such as Note8 or S8/s8+ lol... The consensus from previous reads on XDA and reddit seems to be Whitestone Dome but a lot also gave negative reviews of it due it either lose touch response, or peeling off too easy. I had purchased a full adhesive from aliexpress for my Note8 but could not really use it since I sold the phone to get the S9+ . Anyone has any good recommendation for a tempered glass based on the brands they got for their previous Sammy? I mean recommendation as in, they dropped the phone with it on, like on the corners and the screen survived even though the glass shattered? Case would be great too, as I have a Supcase on the way. Thanks!!

Not the Whitestone then? I was almost about to pull the trigger on getting one for the S9+ but I'm hesitant now.

I've been using Whitestone for myself and my kids, although it has it's fragilities (cold, an snow can alter it) its the best i've tried. I've already ordered mine for the S9+... If i were you get a couple... just in case. As once you've tested it, you won't go back on the side glued ones. You just need to glue it well, and don't be in a hurry.
I've never had issues with touch sensitivity or peeling off (that's even nuts as it's literally glued to the screen, if you break the dome and need to peel it off you should be careful as it's glued it shatters and pieces can jump).

There may be another option now and as upset as I was with the first interation of Zagg's tempered glass screen protector for the s8+, they have come out with the glass curve elite. https://www.zagg.com/us/en_us/invisibleshield/glass-curve-elite-samsung-galaxy-s9-plus/ They say that it has full adhesion. So if it actually works well they supply a lifetime warranty. It is 49.99 so it's expensive but I'm going to give it a shot.
Whitestone was great but with a long installation process, I went for it twice, I'm going to (no offense) pass on Whitestone for my s9+. If there was a tempered glass product for curved screens that was as easy to install as a flat screen tempered glass screen protector, and like a conventional screen protector has good full glass adhesion I'm going to go for that option.

I have tried almost 5 brands but still did not get satisfactory result.

Just pre ordered the white stone. It was the best on the note 8.

Upgrading from two S7 edge to two S9+ (already pre-ordered) I never tried tempered glass on my smartphones because I found them a little too expensive to justify given that I have to buy two glass protectors. The OTAO 3D glass protector looked to be an "inexpensive" way to give tempered glass a try, but someone on the S9 thread about Screen Protectors complained about the OTAO falling off his phone whenever he took it out of his pocket. Some folks have also mentioned that this protector doesn't fully cover the curve edge which makes it "case friendly", but this also make it less appealing. These two negative findings put some doubt in my mind about ordering this specific protector for now. Folks using the S8+ have given this protector a "good" review on Amazon. But I also don't know if most of these reviews are for the "old" version or for the "Updated" version on this protector for the S8+. If there's someone here that has used the "Updated" OTAO protector on a Galaxy phone with a curved screen (preferably the S8+)... can you tell us about your experience? I guessthe "Updated" version is the one being used for the S9+.
I have used Zagg's Invisible HD shields on all my smartphones. I found them to be durable and compatible with many cases. Including cases for the S7 edge.Installing them is a little complex and you need to get it right the first time in order to avoid bubbles and the edges from lifting. I had to return the one that I installed on my wife's S7 edge once because a corner kept lifting and getting dust under it. All I had to do was return the old one and they send me a new one. Once I installed the replacement correctly, it has stayed on her phone for over a year without any issues. I'm waiting for it to be available in Amazon as they're usually discounted. The Zagg website indicates that they're sold out of their Invisible HD shield for the S9+

tamanaco said:
Upgrading from two S7 edge to two S9+ (already pre-ordered) I never tried tempered glass on my smartphones because I found them a little too expensive to justify given that I have to buy two glass protectors. The OTAO 3D glass protector looked to be an "inexpensive" way to give tempered glass a try, but someone on the S9 thread about Screen Protectors complained about the OTAO falling off his phone whenever he took it out of his pocket. Some folks have also mentioned that this protector doesn't fully cover the curve edge which makes it "case friendly", but this also make it less appealing. These two negative findings put some doubt in my mind about ordering this specific protector for now. Folks using the S8+ have given this protector a "good" review on Amazon. But I also don't know if most of these reviews are for the "old" version or for the "Updated" version on this protector for the S8+. If there's someone here that has used the "Updated" OTAO protector on a Galaxy phone with a curved screen (preferably the S8+)... can you tell us about your experience? I guessthe "Updated" version is the one being used for the S9+.
Click to expand...
Click to collapse
OTAO have two versions, a case-friendly one, which has to leave a couple of areas exposed for the case to fit, and a full cover one. I have had the case friendly one on my S8 and been very pleased with it. Never popped off. One person complaining his came off should not be taken to be evidence that there is something inherently wrong. There could be two reasons - either his was slightly faulty with not enough glue - no company has 100% quality control - or maybe he didn't press it on hard enough when he fitted it.
I've had two. The first one cracked when I dropped the phone on a marble floor but the phone screen was unmarked. Even though it cracked, it did not pop off. The edges still stuck. The second one is still on the phone.

Peanuttree said:
There may be another option now and as upset as I was with the first interation of Zagg's tempered glass screen protector for the s8+, they have come out with the glass curve elite. https://www.zagg.com/us/en_us/invisibleshield/glass-curve-elite-samsung-galaxy-s9-plus/ They say that it has full adhesion. So if it actually works well they supply a lifetime warranty. It is 49.99 so it's expensive but I'm going to give it a shot.
Whitestone was great but with a long installation process, I went for it twice, I'm going to (no offense) pass on Whitestone for my s9+. If there was a tempered glass product for curved screens that was as easy to install as a flat screen tempered glass screen protector, and like a conventional screen protector has good full glass adhesion I'm going to go for that option.
Click to expand...
Click to collapse
Will be interested to hear how this full adhesive version stacks up against the LOCA types.
Sent from my SM-G935F using Tapatalk

n-j-f said:
OTAO have two versions, a case-friendly one, which has to leave a couple of areas exposed for the case to fit, and a full cover one. I have had the case friendly one on my S8 and been very pleased with it. Never popped off. One person complaining his came off should not be taken to be evidence that there is something inherently wrong. There could be two reasons - either his was slightly faulty with not enough glue - no company has 100% quality control - or maybe he didn't press it on hard enough when he fitted it.
I've had two. The first one cracked when I dropped the phone on a marble floor but the phone screen was unmarked. Even though it cracked, it did not pop off. The edges still stuck. The second one is still on the phone.
Click to expand...
Click to collapse
Thanks for your reply... The complains put "some doubt" in my mind about the protector, I had not concluded that there was something inherently wrong with the OTAO. I posted here because I wanted to hear comments from other folks before I made my decision.
I didn't know that OTAO also made a protector that fully covers the screen, but after you mentioned it... I searched further and also found the OTAO Full Screen Coverage - Double Strong 3D in Amazon. At the same $12 price as the Case Friendly. At this price point, I might get one of each and test them with the case I'm going to use. I'm looking for a slim TPU cases from Spigen, EasyAcc, ESR and Caseologic. Currently, I use a Ringke Slim case with my S7 edge, but given the larger screen size of the S9+; I'd like a more protective setup. What case are you using on your S8 with the OTAO case friendly protector?... Thanks again.

xterminater07 said:
So the question is probably familiar from past phones from Sammy such as Note8 or S8/s8+ lol... The consensus from previous reads on XDA and reddit seems to be Whitestone Dome but a lot also gave negative reviews of it due it either lose touch response, or peeling off too easy. I had purchased a full adhesive from aliexpress for my Note8 but could not really use it since I sold the phone to get the S9+ . Anyone has any good recommendation for a tempered glass based on the brands they got for their previous Sammy? I mean recommendation as in, they dropped the phone with it on, like on the corners and the screen survived even though the glass shattered? Case would be great too, as I have a Supcase on the way. Thanks!!
Click to expand...
Click to collapse
For my gs8+, I've had good experiences with both the Otao TGSP and the newer full-adhesive ones.
Until a full-adhesive TGSP comes out for the gs9+ from a company I recognize, I'm gonna start with the Otao gs9+ TGSP.
Sent from my SM-N910C using Tapatalk

optimummind said:
For my gs8+, I've had good experiences with both the Otao TGSP and the newer full-adhesive ones.
Until a full-adhesive TGSP comes out for the gs9+ from a company I recognize, I'm gonna start with the Otao gs9+ TGSP.
Click to expand...
Click to collapse
https://www.zagg.com/us/en_us/invis...protector/glass-curve-elite-samsung-galaxy-s9

optimummind said:
For my gs8+, I've had good experiences with both the Otao TGSP and the newer full-adhesive ones.
Until a full-adhesive TGSP comes out for the gs9+ from a company I recognize, I'm gonna start with the Otao gs9+ TGSP.
Sent from my SM-N910C using Tapatalk
Click to expand...
Click to collapse
How's the adhesive on the OTAO full adhesive for the s8+ that u got?

xterminater07 said:
How's the adhesive on the OTAO full adhesive for the s8+ that u got?
Click to expand...
Click to collapse
I'm using this one:
EyeO2 Screen Protector for Samsung Galaxy S8 Plus 9H Full Adhesive 3D Curved Tempered Glass Guard High Sensitivity HD Full Cover Edge Protector S8+ Protective Film Replacement Accessories Black 2 Pack https://www.amazon.com/dp/B074QN6ZB5/ref=cm_sw_r_cp_apa_jPHNAbDN9V2VR
And it's good.
Sent from my SM-N910C using Tapatalk

Well I've gambled on the zagg + defender combo, I hope they play nice.....
Will report back......

i've just ordered this can anyone recommend a decent case please.
https://www.amazon.co.uk/Protector-...=merchant-items&ie=UTF8&qid=1520177568&sr=1-3

I just ordered the Zagg. Saved £4 using promo code zagg10 at checkout. £36 felt easier to swallow then £40!
Sent from my SM-G935F using Tapatalk

n-j-f said:
OTAO have two versions, a case-friendly one, which has to leave a couple of areas exposed for the case to fit, and a full cover one. I have had the case friendly one on my S8 and been very pleased with it. Never popped off. One person complaining his came off should not be taken to be evidence that there is something inherently wrong. There could be two reasons - either his was slightly faulty with not enough glue - no company has 100% quality control - or maybe he didn't press it on hard enough when he fitted it.
I've had two. The first one cracked when I dropped the phone on a marble floor but the phone screen was unmarked. Even though it cracked, it did not pop off. The edges still stuck. The second one is still on the phone.
Click to expand...
Click to collapse
I also have an OTAO on my Note 8 - fits beautifully - holds very well - smooth - full responsiveness - no issues at all.

Geekser said:
I also have an OTAO on my Note 8 - fits beautifully - holds very well - smooth - full responsiveness - no issues at all.
Click to expand...
Click to collapse
What version of the OTAO are you using on your Note 8 [Case Friendly] or [Full Screen Coverage]? Are you using the "Updated" version that I believe has "full-adhesive"? Are you also using a case and if so... which one?

xterminater07 said:
So the question is probably familiar from past phones from Sammy such as Note8 or S8/s8+ lol... The consensus from previous reads on XDA and reddit seems to be Whitestone Dome but a lot also gave negative reviews of it due it either lose touch response, or peeling off too easy. I had purchased a full adhesive from aliexpress for my Note8 but could not really use it since I sold the phone to get the S9+ . Anyone has any good recommendation for a tempered glass based on the brands they got for their previous Sammy? I mean recommendation as in, they dropped the phone with it on, like on the corners and the screen survived even though the glass shattered? Case would be great too, as I have a Supcase on the way. Thanks!!
Click to expand...
Click to collapse
I'll be working on a buyers guide today and tomorrow it will be on my channel.. In the mean time I posted a thread about a 10 dollar dome glass copy from the supplying factory and their are a few full adhesive glass protectors I'm tested.. All the others are the same generic ones just like the S8/N8

Cheap Aliexpress Loca Screen Protectors

I ordered a $2.15 LOCA tempered glass screen protector on Aliexpress. Purchased 08/28 and received it today 09/17. I live in San Francisco. Overall the quality of the screen is pretty much the same as the Whitestone. This one doesn't come with the plastic alignment case that the Whitestone comes with, but you get a UV light and single bottle of glue. I used the same procedure as Whitestone but just without the guide. Also you don't get any tapes to protect the USB ports, etc. I just cut some packing tape and covered those up. I did ok, there is a small air bubble at the bottom. I hope it slowly cures over time. My experience with Whitestone is that you don't want to push and squeeze too hard. You can barely notice it when screen is on, but I'm kind of OCD so I ordered another and may swap it.
So if you have experience and can wait (Note 10/10+ comes with a screen protector), save some money. BTW, finger print works just fine.
Aliexpress Link

is that an Spigen tough armor case?
cheers

Same experience. Nothing fancy, but it gets the job done. Just tape over the speakers. There are some on ebay for a similar price if you don't like using Ali for some reason.
Whitestone and AMFILM are good if you need to be spoon fed.

*looks at my Whitestone with no bubbles* Hmmm... Maybe being "spoon-fed" isn't so bad.

Mr. Orange 645 said:
*looks at my Whitestone with no bubbles* Hmmm... Maybe being "spoon-fed" isn't so bad.
Click to expand...
Click to collapse
I had bubble with my first Whitestone. I think having the guide cage helps but if you have experience, it's not necessary. There is just some luck to it.
Sent from my SM-N975U using Tapatalk

gordec said:
I had bubble with my first Whitestone. I think having the guide cage helps but if you have experience, it's not necessary. There is just some luck to it.
Sent from my SM-N975U using Tapatalk
Click to expand...
Click to collapse
I've installed quite a few LOCA TGSPs. Some I bought LOCA separate and then bought a TGSP and made my own kit. Worked great, was messy AF to install, cause I had NO idea how much to use, LOL. and they all chipped and cracked in a week or two.
I've also bought some cheaper kits that included the right amount of LOCA and a TGSP. They ended up lifting on the edges. Last one I tried was Note 9.
I wound buying a second used Note 9 that already had Whitestone Dome installed by the previous owner, and I loved it. So when I pre-ordered my Note 10+, I pre-ordered a Whitestone Dome for it. Sucked paying over $40, but honestly, I've spent hundreds in the past trying to find the "perfect" screen protector. Don't regret Whitestone or the money spent at all. And the installation tray made it dead simple. It was worth it to get it right the first time.
If I had to change TGSPs, if go with AmFilm, just because they're also getting great reviews are basically half the price. Or I'd go back to a soft screen protector, the Ringke Dual Easy Film. It's just basically invisible.

Mr. Orange 645 said:
I've installed quite a few LOCA TGSPs. Some I bought LOCA separate and then bought a TGSP and made my own kit. Worked great, was messy AF to install, cause I had NO idea how much to use, LOL. and they all chipped and cracked in a week or two.
I've also bought some cheaper kits that included the right amount of LOCA and a TGSP. They ended up lifting on the edges. Last one I tried was Note 9.
I wound buying a second used Note 9 that already had Whitestone Dome installed by the previous owner, and I loved it. So when I pre-ordered my Note 10+, I pre-ordered a Whitestone Dome for it. Sucked paying over $40, but honestly, I've spent hundreds in the past trying to find the "perfect" screen protector. Don't regret Whitestone or the money spent at all. And the installation tray made it dead simple. It was worth it to get it right the first time.
If I had to change TGSPs, if go with AmFilm, just because they're also getting great reviews are basically half the price. Or I'd go back to a soft screen protector, the Ringke Dual Easy Film. It's just basically invisible.
Click to expand...
Click to collapse
Soft ones are uncomfortable with spen right? I tried one for the Note 9.
Sent from my SM-N975U using Tapatalk

gordec said:
Soft ones are uncomfortable with spen right? I tried one for the Note 9.
Sent from my SM-N975U using Tapatalk
Click to expand...
Click to collapse
Depends on which one you buy the wet install ones typically suck to use with the SPen. The Ringke was awesome. Couldn't tell it was there, even with the SPen. I honestly can't speak highly enough of them. They honestly feel like glass.

Thanks. Bought one to try.
Sent from my SM-N975U using Tapatalk

Mr. Orange 645 said:
Depends on which one you buy the wet install ones typically suck to use with the SPen. The Ringke was awesome. Couldn't tell it was there, even with the SPen. I honestly can't speak highly enough of them. They honestly feel like glass.
Click to expand...
Click to collapse
Installed it. I like it. It's not glass but very smooth with Spen. The extreme edges has slight lift but very mild. Not sure if you had some tricks to get all the edges to stay down.

gordec said:
Installed it. I like it. It's not glass but very smooth with Spen. The extreme edges has slight lift but very mild. Not sure if you had some tricks to get all the edges to stay down.
Click to expand...
Click to collapse
I haven't tried one on my N10+, but installed them on my Note 9 and my wife's S10+. Neither one had any issues with the edges lifting at all. I wish I had some tricks to offer, but I just followed the directions.
It's funny, when I installed my wife's Ringke on her S10+ I was showing her the difference between it and the Whitestone Dome tempered glass (which are the time was on my Note 9). I was showing her how glass was smoother than her Ringke protector, but to my surprise, my finger actually glided easier across her Ringke than my Whitestone! Now my Whitestone Dome on that phone was a few months old, so some of the oleophobic coating had probably worn off and her Ringke screen protector was brand new, but I was really shocked and just how smooth it was to the touch.
As far as the lifting edges, two thoughts. One, you didn't get it lined up perfectly so maybe something is a little off? A half millimeter either way could make it uneven. But I don't think thats the issue. Two, perhaps the edges of your phone weren't clean enough and had some residual oils? Or three, you just got a faulty screen protector. If it gets worse, try the second one in the pack. If that fails, reach out to Ringke and they should replace it for free.

Mr. Orange 645 said:
I haven't tried one on my N10+, but installed them on my Note 9 and my wife's S10+. Neither one had any issues with the edges lifting at all. I wish I had some tricks to offer, but I just followed the directions.
It's funny, when I installed my wife's Ringke on her S10+ I was showing her the difference between it and the Whitestone Dome tempered glass (which are the time was on my Note 9). I was showing her how glass was smoother than her Ringke protector, but to my surprise, my finger actually glided easier across her Ringke than my Whitestone! Now my Whitestone Dome on that phone was a few months old, so some of the oleophobic coating had probably worn off and her Ringke screen protector was brand new, but I was really shocked and just how smooth it was to the touch.
As far as the lifting edges, two thoughts. One, you didn't get it lined up perfectly so maybe something is a little off? A half millimeter either way could make it uneven. But I don't think thats the issue. Two, perhaps the edges of your phone weren't clean enough and had some residual oils? Or three, you just got a faulty screen protector. If it gets worse, try the second one in the pack. If that fails, reach out to Ringke and they should replace it for free.
Click to expand...
Click to collapse
The lift is really very minor. Only the most OCD types will mind. Thanks for the rec. I agree how easy it's to glide your finger on it. Finger print also works better.

gordec said:
The lift is really very minor. Only the most OCD types will mind. Thanks for the rec. I agree how easy it's to glide your finger on it. Finger print also works better.
Click to expand...
Click to collapse
I installed Whitestone on my N10+, but bought a pack of Ringke as a back up. Crack the Whitestone, I can install the Ringke while waiting on a replacement.
But, I think what I'll do is next paycheck, I'm going to order the AmFilm LOCA screen protector and run a little comparison.
I've used Whitestone for a month now and am pleased, but I do think it made the FP sensor less accurate But I'll remove it and install the Ringke and see how I like it, especially with the fingerprint sensor.
I'll use that for a couple weeks then install the AmFilm tempered glass one and compare it to the others.
It means a waste of $40, but in the name of inaccurate anecdotal science, why not? And if I decide I prefer Whitestone after all, it's just a $10 replacement under warranty to go back to it. I'll post my results in a thread here, maybe with some pictures.
Sorry, I know that had nothing to do with your lifting edges. Just thinking out loud. And by out loud, I mean in silence and just typing it.

The lifting edges of ringke, when I installed on my s10+, I found it best to work them down initially then just wait a while before trying again. I waited around 30 mins to 1hr after fitting it and found they stuck down easily.
I struggled with the 1st protector so discarded it but using the waiting method, the 2nd protector sides stayed down.

If you like the original screen protector you can get OEM quality screen protectors cheap on eBay. You want ones made out of PET which are harder like the OEM ones and not the soft TPU ones that you have to install wet and they dent way too easily. I install the PET ones wet though as you have time to move it around on the screen to get it aligned perfectly and you just push out the solution (I spray purple cleaner on the screen before I install) and any dust is removed when you push out the solution.

Just installed one myself that came from aliexpress. It turned out fine but was a bit disappointed that the glass is curvy on the edges like an s10 rather than being "boxy" so the edges are a bit exposed. Can't be bothered though to buy another one and go through the installation again as it took quite some time to get it done. Fingerprint is working fine, just press the fingerprint area while curing for the first time.

ajsmsg78 said:
If you like the original screen protector you can get OEM quality screen protectors cheap on eBay. You want ones made out of PET which are harder like the OEM ones and not the soft TPU ones that you have to install wet and they dent way too easily. I install the PET ones wet though as you have time to move it around on the screen to get it aligned perfectly and you just push out the solution (I spray purple cleaner on the screen before I install) and any dust is removed when you push out the solution.
Click to expand...
Click to collapse
I thought using a wet solution would make the glue not stick anymore for the PET types. Also I was told by Samsung that the stock screen protector is applied with a UV light to cure. So it's like a tempered glass install but a thin plastic type?

fusiondynamics said:
I thought using a wet solution would make the glue not stick anymore for the PET types. Also I was told by Samsung that the stock screen protector is applied with a UV light to cure. So it's like a tempered glass install but a thin plastic type?
Click to expand...
Click to collapse
The adhesive will stick fine on the protector even if you install it wet. I do it all the time.

what is the price this protector?
protector price,?

ajsmsg78 said:
The adhesive will stick fine on the protector even if you install it wet. I do it all the time.
Click to expand...
Click to collapse
What do you use, just water or lightly soapy solution?

Cases that work with Whitestone screen protector

Are there any recommended cases that do not interfere with the Whitestone tempered glass screen protector? I know some cases can cause screen protectors to peel up in the corners, since I spent the money on the Whitestone, I want to make sure I don't get a case that won't play nicely with it.
Any recommendations?
Thanks.

I've used the Spigen Neo Hybrid on my Note 8 and now my Note 10. Both have whitestone protectors on them.
https://www.amazon.com/Spigen-Hybrid-Designed-Samsung-Galaxy/dp/B07SXSMXVW

Thanks, I had been looking at some Spigen cases since I previously had one on an S7. Decent cases and not expensive either.

Romans8vs1 said:
I've used the Spigen Neo Hybrid on my Note 8 and now my Note 10. Both have whitestone protectors on them.
https://www.amazon.com/Spigen-Hybrid-Designed-Samsung-Galaxy/dp/B07SXSMXVW
Click to expand...
Click to collapse
Really? I have the neo hybrid on my n10+ and have been eyeing the whitestone. I may just pull the trigger if it works with my current case.
I'm using the flimsy spigen neo flex, dont get me wrong it's a spigen so it works but hate all the finger prints, can scratch easy. The best part of it tho is its case friendly.

ssgunner20 said:
Really? I have the neo hybrid on my n10+ and have been eyeing the whitestone. I may just pull the trigger if it works with my current case.
I'm using the flimsy spigen neo flex, dont get me wrong it's a spigen so it works but hate all the finger prints, can scratch easy. The best part of it tho is its case friendly.
Click to expand...
Click to collapse
It certainly does. It is a perfect fit in my opinion. There is very little space between the screen protector and the edge of the case.

Whitestone protector delivered today, and a complete fail at installation.
I should have known something was up as it was missing the little suction cup, but since I figured that was just needed to remove the guide it should not be a big deal. Watched half a dozen or so videos, felt pretty confident to get started. Took everything slowly, but when I went to move the liquid to the center it kept flowing to the bottom. Even after I laid the phone back flat on my desk, I tried tilting it in the opposite direction, but the fluid appeared to be just running out the bottom between the 2 pieces of the holder.
At that point took everything out and cleaned it off, tried again, this time the glue did not spread to the top of the phone (my desk may not be perfectly level, but it's also not way off either). With the screen protector dropped I tried to coax as much of the glue towards the top as I could. For some reason all the glue seemed to just want to run off the bottom of the phone and then end up between the 2 pieces of the holder/alignment thing. The phone was pushed all the way into it, with the glue initially dropped on the screen it stayed in place, but for some reason after that it just wanted to run off the bottom no matter what.
Ultimately, what I am left with is a bunch of small bubbles and an area around the camera that has no glue. I should have just grabbed a cheap protector and been done with it. Leaving the Whitestone on there for now, even with the bubbles and piece around the camera it is still better than nothing. But, I'm pretty frustrated with the whole thing.

Sorry to hear this, I have been thinking about getting one of thhese whitestone protectors, but then I encounter sad stories, and there are worse ones! I will stick to the tpu/pet/hidrogel ones

It's definitely frustrating as I carefully followed all the steps. The Whitestone does feel great though and the fingerprint reader is not affected at all. Just have the annoying piece by the camera where it didn't stick.
Also, can confirm it works perfectly with the Spigen case mentioned above.

Mostly all of them have worked fine for me so far. I'm eyeing the new Marcel Case by samsung as well .. hope that fits it too

Dang I hope it goes well for me, just ordered 2 yesterday with promo code $52
Sent from my SM-N975U using Tapatalk

Good luck, take your time and you will more than likely be fine. What stinks in my case is I can't fix the messed up piece.

naiku said:
Are there any recommended cases that do not interfere with the Whitestone tempered glass screen protector? I know some cases can cause screen protectors to peel up in the corners, since I spent the money on the Whitestone, I want to make sure I don't get a case that won't play nicely with it.
Any recommendations?
Thanks.
Click to expand...
Click to collapse
Hej...
I'm using Clear Ringke Fusion with Whitestone and there's no problem at all...no peeling on the corners... nothing...
Between case and glass is little space which allows to cooperate perfectly