Database Users

Anyone find a good screen protector film or glass?

Can't find any ones that I like so far. I know the edge makes things difficult but all the glass one I've seen don't have adhesive all over just along the edge and the film one i bought doesn't stay down on the edge so has anyone found a good one or decent one?
Please specify it's full coverage...glass or film...works with case and of so what case

flimflam06 said:
Can't find any ones that I like so far. I know the edge makes things difficult but all the glass one I've seen don't have adhesive all over just along the edge and the film one i bought doesn't stay down on the edge so has anyone found a good one or decent one?
Please specify it's full coverage...glass or film...works with case and of so what case
Click to expand...
Click to collapse
I try using the screen protector that came with the ghostek case I bought install it cover the entire front area of phone plus edges let set for about an hour try to put case on but everytime I did it would lift off the sides of the screen protector so I just took off the screen protector till I find that works. Also try the supershieldz ones same thing.

This is the one I am going to get https://www.amazon.com/dp/B01G7LQZW...TF8&colid=38DVAL1VV0RQM&coliid=I2N75A0MPNERT6

Omega Ra said:
This is the one I am going to get https://www.amazon.com/dp/B01G7LQZW...TF8&colid=38DVAL1VV0RQM&coliid=I2N75A0MPNERT6
Click to expand...
Click to collapse
I was thinking about that one but im not sure about the wet install. I'm good at putting screen protectors on but I've never did a wet install before...i May have to check it out

If you have some time and patience go for the Invisible Shield hd dry full body coverage. I originally ordered a Naked skin from slickwraps but its been processing since the 18th. So when my N7 arrived today I went on the search around town and ended up in a Verizon store. They kindly put it on for me, took two tries lol. Mid-install the Verizon guy just rips it and balls it up and went to grab another. When I got home I went through the packaging and noticed he skimmed me on the install. and didn't install the back.. I tell you what that was the worst torture in my life but hey pics below! Came out beautiful. +extra dbrand lens laying around conveniently . :good: winning

I put on a IQ shield matte. I like the matte finish but it is not for everyone. There is some lost clarity but much less glare and no fingerprints. I like the wet install for no bubbles and being easy. It takes some time to let the edges dry so they will stick. Let it sit at least overnight before using or putting on a case.
My case (Spigen Ultra Hybrid)did cause the corners to lift, a common problem with cases. IQ Shield has since come out with a "case friendly" updated version that is getting good reviews. I've got one on its way.

Phredeee said:
I put on a IQ shield matte. I like the matte finish but it is not for everyone. There is some lost clarity but much less glare and no fingerprints. I like the wet install for no bubbles and being easy. It takes some time to let the edges dry so they will stick. Let it sit at least overnight before using or putting on a case.
My case (Spigen Ultra Hybrid)did cause the corners to lift, a common problem with cases. IQ Shield has since come out with a "case friendly" updated version that is getting good reviews. I've got one on its way.
Click to expand...
Click to collapse
I ended up buying the skinomi matte screen protector which stuck on the edges perfect. Went without a case for a week and then put the spigen neo hybrid on which is my favorite case of all time and it peeled the corners still. I warmed the screen protector and was able to reform the corners a bit and it helped but i still want a problem free combination

This is the case and glass screen protector that I use. The setup is perfect for me. You could use any screen protector with this case. It also holds the glass ones down and keep them in place.
https://www.amazon.com/dp/B01INYYYDI/ref=cm_sw_r_other_apa_CE9Zxb7RJCJPC
https://www.amazon.com/dp/B01JTYPSLI/ref=cm_sw_r_other_apa_hB9ZxbR2MKR17

duracool said:
This is the case and glass screen protector that I use. The setup is perfect for me. You could use any screen protector with this case. It also holds the glass ones down and keep them in place.
https://www.amazon.com/dp/B01INYYYDI/ref=cm_sw_r_other_apa_CE9Zxb7RJCJPC
https://www.amazon.com/dp/B01JTYPSLI/ref=cm_sw_r_other_apa_hB9ZxbR2MKR17
Click to expand...
Click to collapse
Without clicking the link I'm gonna guess that's the unicorn beetle case. I have that myself and love it. I use the holster while at work

Great case. It works well with a glass screen protector.

I have an armorsuit on this phone, as well as several tablets and phones prior. Was originally skeptical of the curved edge, but it is working great so far. In the past 6 years armorsuits and common sense have kept me from having any cracked screens. And when I upgrade and sell the old phones, removing the armorsuit has always left a perfect as-new screen (but the housings usually have suffered damage from drops, etc.).

Skinomi

duracool said:
This is the case and glass screen protector that I use. The setup is perfect for me. You could use any screen protector with this case. It also holds the glass ones down and keep them in place.
https://www.amazon.com/dp/B01INYYYDI/ref=cm_sw_r_other_apa_CE9Zxb7RJCJPC
https://www.amazon.com/dp/B01JTYPSLI/ref=cm_sw_r_other_apa_hB9ZxbR2MKR17
Click to expand...
Click to collapse
Is your tempered glass screen protector any good? How is the clarity? Sensitivity?

The clarity and sensitivity is great. I have one on my phone and my fiances phone. This is the third one we bought and its pretty close to the flat ones. Just line it up because the cut outs are exact. No room for error.

Best Full glue/adhesive tempered glass ,case friendly for s8/s8+/n8 Discussions

I want to open a discussion about full glue / adhesive tempered glass case friendly. What do you think is the best and where do you buy it? let's discuss!

I have tried the following, all without success:
https://www.amazon.com/dp/B074HZV81Z/ref=cm_sw_r_cp_apa_7adlAb2B1WK44
https://www.amazon.com/dp/B075XN6L5Z/ref=cm_sw_r_cp_apa_SbdlAbD6GRT26
https://www.amazon.com/dp/B071RFGSBF/ref=cm_sw_r_cp_apa_ncdlAbQQJ7YPJ
https://www.amazon.com/dp/B06XXWPJYC/ref=cm_sw_r_cp_apa_QcdlAb60FC1FN
Glass ones felt ok, but left an air bubble (gap) between the two pieces of glass. Adhesive not very sticky, fell off very easily. Took off completely after 2 days.
Rubberized ones showed imperfections very easily, and felt weird. Definitely reduced the appearance of the phone. Very distracting. Took off completely after about 15 minutes of use.
I fully suspect these adverse experiences have nothing to do with a particular brand, but the solution in general... Currently have no screen protection on at all now.

This is the best full adhesive. It's alittle thinner than the average glass believe its .28
Check this out at Amazon.com
Galaxy S8 Screen Protector - ICHECKEY Upgraded [Full Adhesive][3D Curved Edge] [Case Friendly] Tempered Glass Screen Cover for Samsung Galaxy S8 https://www.amazon.com/dp/B076F1Y18G/ref=cm_sw_r_other_apa_uRdmAbVJV3JB1

May not be exactly what you were looking for but, I used this.
Pros:
Perfect install, no air bubbles. No adhesive showing. The best one I've used ever in all the phones and screen protectors I've owned.
Cons:
Its expensive. The price went up since when I bought it from $30 to $45.
https://www.amazon.com/gp/product/B06ZZBPXMK/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

MrTrumpz said:
https://www.amazon.com/gp/product/B06ZZBPXMK/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
19 STEPS to the install process!? Intense...
And comes with a free Apple Magic Mouse stand...
So you have one of these installed? If so, please share more: how long, any imperfections after install, how durable, concerns about removal later, etc.
Thanks

hijax2001 said:
19 STEPS to the install process!? Intense...
And comes with a free Apple Magic Mouse stand...
So you have one of these installed? If so, please share more: how long, any imperfections after install, how durable, concerns about removal later, etc.
Thanks
Click to expand...
Click to collapse
I've had mine now for about a month. Looks brand new still. The only main thing to be sure of is getting rid of the dust and any particles on the screen. They will show up. The kit comes with alcohol swabs and dust stickers. Removal is quite simple as it peals of like any other protector would. With clean up such as alcohol wipes. I should also note, that any minor scratches on the screen will be filled with UV glue that is supplied with the kit. This causes the screen to look brand new when the protector is applied. So that's a nice bonus if your screen has any scratches. Not sure if it could hide a deep scratch though.
If you get it, you should watch the official video first.
https://www.youtube.com/watch?v=uCqwSRAiS4s&t=
Read all precautions. Be patient and the results are perfect.
Then, this one. This is the newer 2017 install kit. (Which is what you will most likely receive.)
https://www.youtube.com/watch?v=mC6H1fK3ie4
This video is with a note 8 but gives more insight on the install process.
https://www.youtube.com/watch?v=52fZsu--05g
Here is a review after 3 months.
https://www.youtube.com/watch?v=sUTgIYe6wGk
I'm pretty happy with it. You may be able to find a better deal than on amazon. You'd have to look around though.
There is some light bleeding from the edges of the protector, and is indeed quite apparent on light backgrounds. To me however, this is a small price to pay for the perfect tempered glass protector. This is the best protector I've ever owned.

hijax2001 said:
I have tried the following, all without success:
https://www.amazon.com/dp/B074HZV81Z/ref=cm_sw_r_cp_apa_7adlAb2B1WK44
https://www.amazon.com/dp/B075XN6L5Z/ref=cm_sw_r_cp_apa_SbdlAbD6GRT26
https://www.amazon.com/dp/B071RFGSBF/ref=cm_sw_r_cp_apa_ncdlAbQQJ7YPJ
https://www.amazon.com/dp/B06XXWPJYC/ref=cm_sw_r_cp_apa_QcdlAb60FC1FN
Glass ones felt ok, but left an air bubble (gap) between the two pieces of glass. Adhesive not very sticky, fell off very easily. Took off completely after 2 days.
Rubberized ones showed imperfections very easily, and felt weird. Definitely reduced the appearance of the phone. Very distracting. Took off completely after about 15 minutes of use.
I fully suspect these adverse experiences have nothing to do with a particular brand, but the solution in general... Currently have no screen protection on at all now.
Click to expand...
Click to collapse
The tempered glass screen protectors you linked are not full adhesive. The OP was asking about full adhesive protectors.
As far as the rubbery wet install protectors, if you only left them on 15 minutes then it's no wonder you weren't happy. If you read the instructions, they explain they can look bubbly and distorted for the first 12-24 hours. I'm currently using the Armor Suit one on my Note 8. It's smooth as glass, crystal clear, and you'd never know it's on there. My wife has the Illumishield wet apply protector on her S8+ and again, you'd never know it waa there.
Install it at night before you go to bed. Make sure to get all the dust off the screen, use plenty of of the application solution, and take your time lining it up. Then squeegee all the liquid out from under it. Once installed, let it set overnight. The bubbles go away after 12-48 hours. I've done these enough, I rarely have any bubbles at all immediately after installation. Any rubbery feeling goes away after a day or two.

Case compatibility with the Whitestone Dome Glass master list

I found this master list of cases that work and do not work with the whitestone dome glass on Reddit. I thought it would be helpful for those here as well! There seems to be a submission form for other cases that people have tested out and whether or not they fit, so it is continually updated.
Hope this helps others as it really stinks to spend so much on that screen protector only to have a case screw it up because it doesn't fit
mod edit - affiliate links list removed

Thanks,
I submitted a couple models that work using the link.

Spigen skin air works perfect with my dome protector ?

Nice! Looks like they were already added.

I pre-ordered the Moment case... it's a gamble.

Did the Moment wind up fitting? I was thinking of getting that with the Dome Glass screen protector as well. Haven't seen it on any of these lists.

I have the Spigen Neo hybrid. I noticed that the corners of the screen have a little gap between the screenprotector and the case. On the sides , the gap isnt noticable.

Is the Samsung Alcantara case definitely compatible? Anyone have this case with the whitestone dome?

redeus said:
Is the Samsung Alcantara case definitely compatible? Anyone have this case with the whitestone dome?
Click to expand...
Click to collapse
Yes I have that case for my S9+ and whitestone dome glass.
Sent from my Samsung SM-G965U1 using XDA Labs

Warning about the Moment case. The bottom 2 lips of the case touch the glass (the sides and top are fine). I don't know if I want to keep it on long enough to see if the bottom of the glass lifts....
Edit: The Moment case is not compatible with the Whitestone.

Your list says the OtterBox Pursuit series does not fit, this is false. I would say it is an exact fit with only a few millimeters of "wiggle room" but it does fit with no glass touching or conflicts with the case.

Anyone tried the Youmaker? https://www.amazon.com/gp/product/B07BMSMFC8/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Looks similar to the Unicorn Beetle and was wondering if it worked. I just ordered that and The Unicorn Beetle Hybrid: https://www.amazon.com/gp/product/B079BSJH8M/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Figured Ive never really had a problem except when I had my S7 Edge that the screen shattered twice. Hoping cause its not as curved that itll be less likely to break as long as I have a decent case on it. But still want a screen protector.

Anyone have Vena vArmor case?
https://www.ebay.com/itm/Vena-vArmo...er-Shockproof-Stand-Case-/312153941342?_ul=HR
Poslano sa mog SM-T555 koristeći Tapatalk

https://forum.xda-developers.com/ga...innest-minimalist-case-kevlar-aramid-t3780879
pitaka case also works well

xbmoyx said:
Your list says the OtterBox Pursuit series does not fit, this is false. I would say it is an exact fit with only a few millimeters of "wiggle room" but it does fit with no glass touching or conflicts with the case.
Click to expand...
Click to collapse
It fits with pursuit? Mind sharing pics with it?

Whitestone Dome glass fits Galaxy S9+ perfectly with Incipio Dual Pro case ?
Sent from my Galaxy S9+ using XDA Labs

infamousvincci said:
It fits with pursuit? Mind sharing pics with it?
Click to expand...
Click to collapse
No problem, here ya go. Been installed for almost a month now with no issues, definitely the best combo for overall protection IMO.

xbmoyx said:
No problem, here ya go. Been installed for almost a month now with no issues, definitely the best combo for overall protection IMO.
Click to expand...
Click to collapse
I just went with this combo as well. Whitestone said that they haven't had any problems so far with this case so I got it. Now that both are in my hands, it seems initially that it might cause problems... However I don't think the case bezel actually sits fully flush with the glass. There's a soft, flexible barrier used to keep dust out, and I think this is what keeps the comparability. I can try posting a picture if needed but from what I'm reading around I haven't seen anybody claiming incompatibility with the Pursuit so far.
Of course, I just installed my Dome today so I'll let you guys know how the pursuit goes for me.
EDIT: Fits perfectly fine. No part of the case is really touching the glass. Just be careful when putting the case on is all.

Radboy16 said:
I just went with this combo as well. Whitestone said that they haven't had any problems so far with this case so I got it. Now that both are in my hands, it seems initially that it might cause problems... However I don't think the case bezel actually sits fully flush with the glass. There's a soft, flexible barrier used to keep dust out, and I think this is what keeps the comparability. I can try posting a picture if needed but from what I'm reading around I haven't seen anybody claiming incompatibility with the Pursuit so far.
Of course, I just installed my Dome today so I'll let you guys know how the pursuit goes for me.
Click to expand...
Click to collapse
Yes it seems like the case come close to the screen, but there is a gap with a barrier which is raised off the glass letting the WhiteStone dome fit.

I have Spigen Liquid Armor, Slim Armor, Ultra Hybrid Clear, and Air Skin.
I'm very sure Air Skin can fit, and also Slim Armor cannot fit.
I need to verify Liquid Armor and Ultra Hybrid can fit. Anyone also using the same type?
Master list indicate Liquid Armor cannot fit, and Ultra Hybrid can fit. But I need a review from the users direct if there's any.

[REVIEW] amFilm Ultra Glass Screen Protector

Hello all!
First time posting in a while, so forgive me if I'm a bit rusty. I just got my Samsung Galaxy Note 10+ yesterday, and my amFilm Ultra Glass Screen Protector today, so I thought I'd write up a little review. Sorry for no pics, but I was busy installing and trying to keep things dust-free
I've used Whitestone in the past but was disappointed with both my Note 8 and 9 installs, primarily because of the LOCA spiderwebbing on the edges. I figured I'd give another brand a shot, so I went searching here and found the amFilm Ultra Glass Screen Protector. A quick trip over to Amazon, and $40 later (for a full kit including *2* protectors) and here we are!
PACKAGING: The box is nice - wider and flatter than the WS product. It's clean and simple, but professional looking. Plus their website and install video are well done also. Inside the outer box are three smaller boxes. The largest contains the plastic frame, screen protectors, and wipes (I think). The medium size box contains the UV light and the MicroUSB cable. It appears to be identical to the WS product, but I don't know this for a fact, so take that for what it's worth. The smallest box contains the LOCA (2 tubes), extra absorption pads, plastic pin, tabs to place over the speaker, a bubble level, and a weight. Everything you need comes in this kit, including plenty of wet and dry wipes, microfiber cloths, and dust removal stickers. On the packaging is a QR code to go to the install video.
PRODUCT: Everything seems to be on the same quality scale as the WS product, with a few minor changes - 1) there is no LOCA applicator "bridge", you have to aim and dribble the solution by hand, 2) the pin is different - there's no more tilting the entire phone to move the liquid into position - the pin is angled and sets the glass down at an angle, and 3) the "fingerprint" weight (more on this later). Otherwise, if you've done the WS before, this isn't significantly different.
INSTALLATION: **REMINDER** REMOVE the factory plastic screen protector and clean your screen THOROUGHLY before proceeding! I ALMOST forgot, which would have been a disaster! I watched the video twice and didn't see any mention of this, so amFilm, here's a tip for you. Anyway, installation is straightforward -put the little feet on the bottom of the phone to bring it flush with the pins inside, make sure the screen is 100% clean, install the sticker over the speaker, apply the liquid (making sure to absorb any "splatter" before proceeding!), peel the protective film off the glass, place it, and pull the pin. Once the liquid starts to spread, put the weight where the fingerprint sensor is and let it settle and "ooze" for 3-ish minutes. (NOTE - it's hard to locate the fingerprint scanner, so you might want to mark the frame in advance with a Sharpie (another tip for amFilm - marking that plastic with some kind of raised bumps or hash marks might be a good idea, or maybe a film for on top of the glass that marks where to place it - just a thought). After that, it's bake-time under the UV light, then you're done.
RESULTS: I'm very impressed so far. The glass appears to be nice and clear, and I can't even see the little "spots" in the corners others mentioned. I lucked out this time and no dust specs at all. No bubbles, etc. the fingerprint scanner appears to be working fine, although I haven't re-registered anything. It DOES require a little extra "umph" to scan, but that's not a big deal. Part of that could be me getting used to an in-screen scanner. There was minimal over-oozing, and the pre-installed pads absorbed everything fine. Barely needed a wipedown afterward.
FITMENT: There appears to be no flaws in placement using the guide, or in the fitment of the glass. It sits flat, and lines up exactly where it should. The cutout for the front-facing camera is exactly where it should be, and it's not overly-exaggerated in size. The edges leave plenty of room for putting the phone in a case (I've tried 4 so far, all fit without touching the glass edge, so there's no worry about case push on the glue). The bottom edge is just a tad bit short, maybe a 1/16", but that could be allowing for larger cases (I don't use the big bulky ones, so IDK).
OVERALL ASSESSMENT: 4.5/5 Stars - Great product, especially for the price. I'll keep you posted on long-term wear & quality, but for now, I'd say it's a great deal versus the competition.

Great review. I just installed mine yesterday and I've had exactly the same great experience with the product. It really does work well with the fp scanner. I had a terrible time with the S10 plus fp scanner and the Whitestone. Great price as well. I'll buy again for sure.

Mine note come with preinstalled glass protector

fazi78 said:
Mine note come with preinstalled glass protector
Click to expand...
Click to collapse
So did everyone's. There's three or four threads about it already. And that's why the OP said to make sure to removed the factory installed screen protector.

Will this work with the samsung clearview cover ?
and can this protector be easily removed?
thanks

I just picked up a set of the amfilm install went flawless a lot easier than the whitestone I had on my S8 fingerprint worked right of the bat with what I had already registered I think it even sensed it better than the stock protector that came with the phone, well spent $40 bucks on amazon
Forgot to mention it fits perfect with my otterbox case

neils31 said:
Will this work with the samsung clearview cover ?
and can this protector be easily removed?
thanks
Click to expand...
Click to collapse
Not sure about the Clearview cover, I haven't ordered it yet.
As for removal, it uses LOCA glue to adhere the screen protector to the phone, so it's not the easiest thing to remove, but will come off with a little effort. You will want to have lots of alcohol wipes handy to clean the screen afterwards. Maybe a few Band-Aids, too

AMfilm doesn't seem to gather dust at the edges like it did with the Whitestone install on my Galaxy Note 9. That's a blessing! I was always cleaning clingy dust away on a daily basis. The edges on this install are clean!

RaymondPJR said:
AMfilm doesn't seem to gather dust at the edges like it did with the Whitestone install on my Galaxy Note 9. That's a blessing! I was always cleaning clingy dust away on a daily basis. The edges on this install are clean!
Click to expand...
Click to collapse
Hey Ray, do you know why? is it because of different density loca glue? I really want to switch to glass protector but hesitant because of dust built up around the edges.
Sent from my SM-N975W using Tapatalk

neils31 said:
Will this work with the samsung clearview cover ?
and can this protector be easily removed?
thanks
Click to expand...
Click to collapse
yep. works with every case i got so far. Might have issue with the ones with a front plastic piece though like on some heavy duty cases.
not sure about removal, but ive not had issue with any loca based one so far in the years ive used them.

lexi250 said:
Hey Ray, do you know why? is it because of different density loca glue? I really want to switch to glass protector but hesitant because of dust built up around the edges.
Click to expand...
Click to collapse
It must be a difference in the glue, I don't know what else accounts for it. I had really fuzzy edges all the time with WS.

How hard is it if you want to remove the screen protector pls?

I'll add my review...
I applied this to my S20+ yesterday. The steps were clear on paper, but the video was more helpful still.
Everything went fine with the exception that when I opened the adhesive tube it sprayed out a bit even before the top cap was opened, and I suspect this is due to me living at a high altitude. As a result my glue didn't fully spread to the whole screen, but close, and there were many small bubbles in the center of the screen. Next time I might try opening and closing the top first to equilibrate pressure.
That said, this is a promising product. It has a smooth and even finish, remains low profile so my case fits which still wraps the lateral edges, and the fingerprint part works a bit better than with the cheap plastic screen protector that samsung supplied (which also scratched easily).
I've never used screen protectors on prior phones, but this product is nice enough that I'll use it on future phones as well.
Additionally, the customer service was outstanding and they immediately sent me a replacement protector and more adhesive to try again.
Thumbs up so far, I'm confident my next application will be successful.

For those who installed this last year, how has it held up?

Jammol said:
For those who installed this last year, how has it held up?
Click to expand...
Click to collapse
Not good I'm guessing, based on the lack of replies. Wish someone woulda replied, oh well...
Sent from my SM-N950U using Tapatalk

Sorry, haven't been on XDA much. I've had my amfilm since Dec, 2019 and it's still like new. Oleophobic coating has not wear off.

Cheap Aliexpress Loca Screen Protectors

I ordered a $2.15 LOCA tempered glass screen protector on Aliexpress. Purchased 08/28 and received it today 09/17. I live in San Francisco. Overall the quality of the screen is pretty much the same as the Whitestone. This one doesn't come with the plastic alignment case that the Whitestone comes with, but you get a UV light and single bottle of glue. I used the same procedure as Whitestone but just without the guide. Also you don't get any tapes to protect the USB ports, etc. I just cut some packing tape and covered those up. I did ok, there is a small air bubble at the bottom. I hope it slowly cures over time. My experience with Whitestone is that you don't want to push and squeeze too hard. You can barely notice it when screen is on, but I'm kind of OCD so I ordered another and may swap it.
So if you have experience and can wait (Note 10/10+ comes with a screen protector), save some money. BTW, finger print works just fine.
Aliexpress Link

is that an Spigen tough armor case?
cheers

Same experience. Nothing fancy, but it gets the job done. Just tape over the speakers. There are some on ebay for a similar price if you don't like using Ali for some reason.
Whitestone and AMFILM are good if you need to be spoon fed.

*looks at my Whitestone with no bubbles* Hmmm... Maybe being "spoon-fed" isn't so bad.

Mr. Orange 645 said:
*looks at my Whitestone with no bubbles* Hmmm... Maybe being "spoon-fed" isn't so bad.
Click to expand...
Click to collapse
I had bubble with my first Whitestone. I think having the guide cage helps but if you have experience, it's not necessary. There is just some luck to it.
Sent from my SM-N975U using Tapatalk

gordec said:
I had bubble with my first Whitestone. I think having the guide cage helps but if you have experience, it's not necessary. There is just some luck to it.
Sent from my SM-N975U using Tapatalk
Click to expand...
Click to collapse
I've installed quite a few LOCA TGSPs. Some I bought LOCA separate and then bought a TGSP and made my own kit. Worked great, was messy AF to install, cause I had NO idea how much to use, LOL. and they all chipped and cracked in a week or two.
I've also bought some cheaper kits that included the right amount of LOCA and a TGSP. They ended up lifting on the edges. Last one I tried was Note 9.
I wound buying a second used Note 9 that already had Whitestone Dome installed by the previous owner, and I loved it. So when I pre-ordered my Note 10+, I pre-ordered a Whitestone Dome for it. Sucked paying over $40, but honestly, I've spent hundreds in the past trying to find the "perfect" screen protector. Don't regret Whitestone or the money spent at all. And the installation tray made it dead simple. It was worth it to get it right the first time.
If I had to change TGSPs, if go with AmFilm, just because they're also getting great reviews are basically half the price. Or I'd go back to a soft screen protector, the Ringke Dual Easy Film. It's just basically invisible.

Mr. Orange 645 said:
I've installed quite a few LOCA TGSPs. Some I bought LOCA separate and then bought a TGSP and made my own kit. Worked great, was messy AF to install, cause I had NO idea how much to use, LOL. and they all chipped and cracked in a week or two.
I've also bought some cheaper kits that included the right amount of LOCA and a TGSP. They ended up lifting on the edges. Last one I tried was Note 9.
I wound buying a second used Note 9 that already had Whitestone Dome installed by the previous owner, and I loved it. So when I pre-ordered my Note 10+, I pre-ordered a Whitestone Dome for it. Sucked paying over $40, but honestly, I've spent hundreds in the past trying to find the "perfect" screen protector. Don't regret Whitestone or the money spent at all. And the installation tray made it dead simple. It was worth it to get it right the first time.
If I had to change TGSPs, if go with AmFilm, just because they're also getting great reviews are basically half the price. Or I'd go back to a soft screen protector, the Ringke Dual Easy Film. It's just basically invisible.
Click to expand...
Click to collapse
Soft ones are uncomfortable with spen right? I tried one for the Note 9.
Sent from my SM-N975U using Tapatalk

gordec said:
Soft ones are uncomfortable with spen right? I tried one for the Note 9.
Sent from my SM-N975U using Tapatalk
Click to expand...
Click to collapse
Depends on which one you buy the wet install ones typically suck to use with the SPen. The Ringke was awesome. Couldn't tell it was there, even with the SPen. I honestly can't speak highly enough of them. They honestly feel like glass.

Thanks. Bought one to try.
Sent from my SM-N975U using Tapatalk

Mr. Orange 645 said:
Depends on which one you buy the wet install ones typically suck to use with the SPen. The Ringke was awesome. Couldn't tell it was there, even with the SPen. I honestly can't speak highly enough of them. They honestly feel like glass.
Click to expand...
Click to collapse
Installed it. I like it. It's not glass but very smooth with Spen. The extreme edges has slight lift but very mild. Not sure if you had some tricks to get all the edges to stay down.

gordec said:
Installed it. I like it. It's not glass but very smooth with Spen. The extreme edges has slight lift but very mild. Not sure if you had some tricks to get all the edges to stay down.
Click to expand...
Click to collapse
I haven't tried one on my N10+, but installed them on my Note 9 and my wife's S10+. Neither one had any issues with the edges lifting at all. I wish I had some tricks to offer, but I just followed the directions.
It's funny, when I installed my wife's Ringke on her S10+ I was showing her the difference between it and the Whitestone Dome tempered glass (which are the time was on my Note 9). I was showing her how glass was smoother than her Ringke protector, but to my surprise, my finger actually glided easier across her Ringke than my Whitestone! Now my Whitestone Dome on that phone was a few months old, so some of the oleophobic coating had probably worn off and her Ringke screen protector was brand new, but I was really shocked and just how smooth it was to the touch.
As far as the lifting edges, two thoughts. One, you didn't get it lined up perfectly so maybe something is a little off? A half millimeter either way could make it uneven. But I don't think thats the issue. Two, perhaps the edges of your phone weren't clean enough and had some residual oils? Or three, you just got a faulty screen protector. If it gets worse, try the second one in the pack. If that fails, reach out to Ringke and they should replace it for free.

Mr. Orange 645 said:
I haven't tried one on my N10+, but installed them on my Note 9 and my wife's S10+. Neither one had any issues with the edges lifting at all. I wish I had some tricks to offer, but I just followed the directions.
It's funny, when I installed my wife's Ringke on her S10+ I was showing her the difference between it and the Whitestone Dome tempered glass (which are the time was on my Note 9). I was showing her how glass was smoother than her Ringke protector, but to my surprise, my finger actually glided easier across her Ringke than my Whitestone! Now my Whitestone Dome on that phone was a few months old, so some of the oleophobic coating had probably worn off and her Ringke screen protector was brand new, but I was really shocked and just how smooth it was to the touch.
As far as the lifting edges, two thoughts. One, you didn't get it lined up perfectly so maybe something is a little off? A half millimeter either way could make it uneven. But I don't think thats the issue. Two, perhaps the edges of your phone weren't clean enough and had some residual oils? Or three, you just got a faulty screen protector. If it gets worse, try the second one in the pack. If that fails, reach out to Ringke and they should replace it for free.
Click to expand...
Click to collapse
The lift is really very minor. Only the most OCD types will mind. Thanks for the rec. I agree how easy it's to glide your finger on it. Finger print also works better.

gordec said:
The lift is really very minor. Only the most OCD types will mind. Thanks for the rec. I agree how easy it's to glide your finger on it. Finger print also works better.
Click to expand...
Click to collapse
I installed Whitestone on my N10+, but bought a pack of Ringke as a back up. Crack the Whitestone, I can install the Ringke while waiting on a replacement.
But, I think what I'll do is next paycheck, I'm going to order the AmFilm LOCA screen protector and run a little comparison.
I've used Whitestone for a month now and am pleased, but I do think it made the FP sensor less accurate But I'll remove it and install the Ringke and see how I like it, especially with the fingerprint sensor.
I'll use that for a couple weeks then install the AmFilm tempered glass one and compare it to the others.
It means a waste of $40, but in the name of inaccurate anecdotal science, why not? And if I decide I prefer Whitestone after all, it's just a $10 replacement under warranty to go back to it. I'll post my results in a thread here, maybe with some pictures.
Sorry, I know that had nothing to do with your lifting edges. Just thinking out loud. And by out loud, I mean in silence and just typing it.

The lifting edges of ringke, when I installed on my s10+, I found it best to work them down initially then just wait a while before trying again. I waited around 30 mins to 1hr after fitting it and found they stuck down easily.
I struggled with the 1st protector so discarded it but using the waiting method, the 2nd protector sides stayed down.

If you like the original screen protector you can get OEM quality screen protectors cheap on eBay. You want ones made out of PET which are harder like the OEM ones and not the soft TPU ones that you have to install wet and they dent way too easily. I install the PET ones wet though as you have time to move it around on the screen to get it aligned perfectly and you just push out the solution (I spray purple cleaner on the screen before I install) and any dust is removed when you push out the solution.

Just installed one myself that came from aliexpress. It turned out fine but was a bit disappointed that the glass is curvy on the edges like an s10 rather than being "boxy" so the edges are a bit exposed. Can't be bothered though to buy another one and go through the installation again as it took quite some time to get it done. Fingerprint is working fine, just press the fingerprint area while curing for the first time.

ajsmsg78 said:
If you like the original screen protector you can get OEM quality screen protectors cheap on eBay. You want ones made out of PET which are harder like the OEM ones and not the soft TPU ones that you have to install wet and they dent way too easily. I install the PET ones wet though as you have time to move it around on the screen to get it aligned perfectly and you just push out the solution (I spray purple cleaner on the screen before I install) and any dust is removed when you push out the solution.
Click to expand...
Click to collapse
I thought using a wet solution would make the glue not stick anymore for the PET types. Also I was told by Samsung that the stock screen protector is applied with a UV light to cure. So it's like a tempered glass install but a thin plastic type?

fusiondynamics said:
I thought using a wet solution would make the glue not stick anymore for the PET types. Also I was told by Samsung that the stock screen protector is applied with a UV light to cure. So it's like a tempered glass install but a thin plastic type?
Click to expand...
Click to collapse
The adhesive will stick fine on the protector even if you install it wet. I do it all the time.

what is the price this protector?
protector price,?

ajsmsg78 said:
The adhesive will stick fine on the protector even if you install it wet. I do it all the time.
Click to expand...
Click to collapse
What do you use, just water or lightly soapy solution?