I finally got my JIG and was able to put the phone in the DOWNLOAD mode.
1) After that I tried to update my faulty bootloader (4.10.1.9) using the guide - http://forum.xda-developers.com/showthread.php?t=1019112 but I got stuck with the message "CONFIRM PHONE MODEL" !!
2) Then I tried flashing the ROM "I8700 XEN I8700XENJK1" and subsequently "I8700XXKC1_XXKB2" (using all 4 files - csc,eb0,nb0,bin) but got the same error.
(I had installed the Samsung drivers - "I8700_Samsung_Mobile_USB_Driver_V5.2__V1.2.1050.0") before doing the above mentioned steps.
3) Next I tried to use the Samsung update tool "Device_Update_Support_Tool_for_OMNIA7_KC3_Ver1.2" and it detected the phone correctly but after clicking START, it stopped at 12% with the error "SLDR WRITE FLASH Failed".
So for me even after putting the phone in the DOWNLOAD mode using he JIG, it am unable to overwrite my faulty bootloader.
My Phone Info:
OS Version: 7.0.7390.0
Firmware revision number: 0222.10.10.6
Radio software version: 2424.10.10.6
Bootloader version: 4.10.1.9
Carrier: Orange (Switzerland)
By the way, my wife has the same phone from Orange and I have tried the same steps with her phone and it had the same errors reported.
So it looks like all the SAMSUNG OMNIA 7 phones from Orange Switzerland may have issues !!
Any help would be appreciated.
Attaching the screen-shots for the errors
Attaching the screen-shot of the errors that I explained in my previous post.View attachment 605821
View attachment 605822
Sameer Battoo said:
Attaching the screen-shot of the errors that I explained in my previous post.View attachment 605821
View attachment 605822
Click to expand...
Click to collapse
to the first pic - confirm model name:
I had this as well when I didn't put the phone in download mode by mistake
after I was in download mode, flashing my device went without any errors
cheers,
simon
Had the exacly same issue (sldr write flash failed, stuck at 13%). Bootloader 4.10.1.9. I wanted to execute the Device_Update_Support_Tool_for_OMNIA7_KC3_Ver1.2 to update to latest WP7 version. I tried on another computer and it worked.
Hi everyone,
I just received at&t unlocked focus having rev 1.4 . I am not using this phone with at&t sim.
I am facing too many problems:
1. GPS is not working. GPSInfo says that location service is disabled, though it's enabled in settings. When I tried with samsung diagnosis app (##634## then *#1472365#), it says "location service is not supported on this device".
2.
A] Device is not updating to mango. Zune recognizes the device only when it's connected to computer and rebooted. After that zune works fine but when I try to update, I get error 800705b4 and sometimes 800706be.
B] Tried phone support tool but it says that device is not in "connect to pc" mode.
C] When tried manually updating via cab files using updatew.exe, it doesn't work.
Is there any way of updating it to mango? Also can just gps be fixed somehow?
Device details:
Samsung focus i917 rev 1.4 at&t
OS version: 7.0.7392.0
Firmware: 2103.11.4.1
Hardware: 3.1.0.7
Radio software: 2103.11.4.1
Radio hardware: 0.0.0.4
Bootloader: 5.4.2.1
Chip SOC: 0.36.2.0
Solution found:
I flashed Samsung i917 Focus firmware UCJK3 ATT USA 4K available in one of the threads and then zune updated it to mango 7720 in about 2 hrs. Now everything is working properly. Thanks to all those who took time to view my post.
I sensed something wrong with you PC.
Maybe you should reset your phone, and dial ##634# and enter *#7284#, switch to ZUNE SYNC.
three days, trying to repair the imei= nul , i trayed all methode posted in this forum plus others from exDeveloper, this new security came with all misfortune, please any developer save us, as a superman makes always!!
the issue is the *#9090# serviceMode don't working, so Z3X dont recognize the phone i trayed a lot of ways *#0808# and go with serial port , 0 phone detected, flash modem.bin 4.2.2 but no chance,
Selected model: M919V
Selected port: COM5 USB Serial Port
Selected port speed: 115200
Reading phone info... no answer from phone
please help , i wont get back my phone
tadj said:
three days, trying to repair the imei= nul , i trayed all methode posted in this forum plus others from exDeveloper, this new security came with all misfortune, please any developer saved us, as a superman make always!!
the issue is the *#9090# serviceMode don't working, so Z3X dont recognize the phone i trayed a lot of ways *#0808# and go with serial port , 0 phone detected, flash modem.bin 4.2.2 but no chance,
Selected model: M919V
Selected port: COM5 USB Serial Port
Selected port speed: 115200
Reading phone info... no answer from phone
please help , i wont get back my phone
Click to expand...
Click to collapse
I had an At&t S4 phone and somehow I messed up my IMEI so it became null , I got it back incredibly by rooting the phone using the Kingo Android Root Method : http://www.kingoapp.com/android-root.htm
try it , you don't lose nothing . wish you good luck
machhho said:
I had an At&t S4 phone and somehow I messed up my IMEI so it became null , I got it back incredibly by rooting the phone using the Kingo Android Root Method : http://www.kingoapp.com/android-root.htm
try it , you don't lose nothing . wish you good luck
Click to expand...
Click to collapse
thank you but it didn't work , rooting ok but still imei problem
I used this method....
http://forum.xda-developers.com/showthread.php?t=1264021
Good luck.
TheAxman said:
I used this method....
http://forum.xda-developers.com/showthread.php?t=1264021
Good luck.
Click to expand...
Click to collapse
i will tray, thank you
Do you still need help with S4 IMEI repair? Let me know. Have you used z3x box few times?
TheAxman said:
I used this method....
http://forum.xda-developers.com/showthread.php?t=1264021
Good luck.
Click to expand...
Click to collapse
there is no .nv_data file, it's new security
help
atinder said:
Do you still need help with S4 IMEI repair? Let me know. Have you used z3x box few times?
Click to expand...
Click to collapse
yes, i have used z3x box a lotof . but i din't find a solution for this issue , the problem is when i type: *#9090# then black screen comes in steed serviceCode menu for choosing uart port, on serial port i can't find the phone not like M919 and others , the M919V is different ,please help me,
ok, can you please tell me how you did it ? i will appreciate that.
this is all DAta work my bad nv_data and a true nv_data from other good same s4 with two methode this is the link https://www.mediafire.com/?3b0elx4r835jjl3
please can some one edit the good nv_data to make it compatible with my phone, all backups are in the file
tadj said:
ok, can you please tell me how you did it ? i will appreciate that.
this is all DAta work my bad nv_data and a true nv_data from other good same s4 with two methode this is the link https://www.mediafire.com/?3b0elx4r835jjl3
please can some one edit the good nv_data to make it compatible with my phone, all backups are in the file
Click to expand...
Click to collapse
please can any one help?????
waooooooooooooooooooo
the big problem become no thing , i resolve my problem i did it waooooo
Selected model: M919
Selected port: COM5 USB Serial Port
Selected port speed: 115200
Searching ADB device... OK
Reading phone info...
Model: SGH-M919V
Android version: 4.3
Product code: Not Active
Phone version: M919VVLUEMK5
PDA version: M919VVLUEMK5
CSC version: M919VYVLEMK5
IMEI: Unknown
Checking Super user right... true
Writing data to phone... OK
Rebooting phone... OK
Now connect phone to UART cable
Checking phone at COM5 OK
Reading phone info...
Model: SGH-M919V
Country code: VTR
Cal date: -
Factory SW: M919VVLUEMK5
Unique number: C16B01E89xxxxxx
Memory phone: -
Bypass MSL... OK
Repairing IMEI... OK
Rebooting... OK
Repair done
Done with Samsung Tool v.14.7
just use this version of z3x as you have m919v use just m919 and this methode
IMEI REPAIR for T999 T999L I747 M919 I337 with New Security and 4.3
. go to setting and enable debugging, dial *#0808#(with I337) or *#7284# (with M919, T999, I747) and chose DM+ADB+MODEM, then install drivers.
2. Root the phone, there are too many root methods out there, just chose the one that you feel appropriate for you.
3. Open Z3X 14.7 and chose the correct model.
4. Write the correct IMEI and click repair
5. Use Uart cable when prompt.
Done.
Code:
Selected model: I337
Selected port: COM535 Z3X BOX Serial Port
Selected port speed: 115200
Searching ADB device...
Please, allow USB debugging on phone... OK
Reading phone info...
Model: SAMSUNG-SGH-I337
Android version: 4.3
Product code: SGH2I337ZKMATT
Phone version: I337UCUEMK2
PDA version: I337UCUEMK2
CSC version: I337ATTEMK2
IMEI: Unknown
Checking Super user right... true
Writing data to phone... OK
Rebooting phone... OK
Now connect phone to UART cable
Checking phone at COM535 OK
Reading phone info...
Model: SGH-I337
Country code: ATT
Cal date: -
Factory SW: I337UCUEMK2
Unique number: C16B05D6xxxxxxx
Memory phone: -
Bypass MSL... OK
Repairing IMEI... OK
Rebooting... OK
Repair done
Done with Samsung Tool v.14.7
thank you very much hasanr92 , thank you
Sorry to Jump thread but no point making a new on with same problem, I tried to repair IME on s4 I9505 (android 4.3) with IMEI = /01 using Z3X
code -
Selected model: I9505
Selected port: COM21 Z3X BOX Serial Port
Selected port speed: 115200
Searching ADB device...
Please, allow USB debugging on phone... OK
Reading phone info...
Model: GT-I9505
Android version: 4.3
Product code: Not Active
Phone version: I9505XXUENAA
PDA version: I9505XXUENAA
CSC version: I9505YXXENA7
IMEI:
spent 1ms
Phone S/N: 00000000000
Checking Super user right... true
Writing data to phone... OK
Rebooting phone... OK
Checking phone at COM21 OK
Repairing IMEI... OK
Repairing network settings... OK
Reseting... OK
Repair done
Done with Samsung Tool v.16.9
BUT on checking IMEI is still /01 ?
ive tried everythig but i cant get anything to change.
Samsung Tools 14.7
I cannot find Samsung Tools 14,7 can somebody send me the link or file.
Help me to unlock my Samsung S4 Sprint Tri-band
Modem Model: L720TVPUBOA3 SPH-L720T
1- before updating the device it is working correctly on UFONE Carrier.
2-after updating the device with ##72786# it's gone on country lock and give me the error of Invalid Sim.
3-I am trying to unlock it with Odin3 3.07 and it's not work ...
4- now my phone is given an error "Firmware upgrade encountered an issue. please select recovery mode in kies & try again."
And now my mobile is unable to use please give me the advice to active my device
SPH-L720T Tri-Band
[email protected] said:
Help me to unlock my Samsung S4 Sprint Tri-band
Modem Model: L720TVPUBOA3 SPH-L720T
1- before updating the device it is working correctly on UFONE Carrier.
2-after updating the device with ##72786# it's gone on country lock and give me the error of Invalid Sim.
3-I am trying to unlock it with Odin3 3.07 and it's not work ...
4- now my phone is given an error "Firmware upgrade encountered an issue. please select recovery mode in kies & try again."
And now my mobile is unable to use please give me the advice to active my device
Click to expand...
Click to collapse
Help me pls
Hi there,
Please wait until mods will move this thread to the device specific forum for more relevant answers.
Stand by
[email protected] said:
Help me to unlock my Samsung S4 Sprint Tri-band
Modem Model: L720TVPUBOA3 SPH-L720T
1- before updating the device it is working correctly on UFONE Carrier.
2-after updating the device with ##72786# it's gone on country lock and give me the error of Invalid Sim.
3-I am trying to unlock it with Odin3 3.07 and it's not work ...
4- now my phone is given an error "Firmware upgrade encountered an issue. please select recovery mode in kies & try again."
And now my mobile is unable to use please give me the advice to active my device
Click to expand...
Click to collapse
You shouldn't have used that dailer code to "upgrade " that only works for the phone when it is on the Sprint network and its known to take away the unlock. You have to unlock the phone again in order the activate it on your GSM network
Sent from my SM-N910W8
UICC Unlock ?
Firmware Upgrade is done ... now i just to unlock it's UICC it's given Invalid SIM what should i do ?
(Noob here)
My phone can't connect to mobile network. I tried reflashing the stock and many other roms, trying a new sim card. (I'm currectly on RR-OS 5.8.6)
----
ALE-L21
Baseband version: 22.355.03.00.00
----
*#*#4636#*#*:
IMEI: ******(not blacklisted)
Phone number: blank
Currect network: blank
...
Voice service: Emergency calls only
Data service: disconnected
...
Voice Call status: Idle
...
I tried many network types none of them seems to work.
----
When i try to manually connect to a networks it says: "Can't connect to this network right now.Try again later."
If i try to call someone "Mobile network not available."
APNs are looking okay
Thanks for help, sorry for bad english.