hi
i have a a7 2016 live demo unit.
in retail mod buttons are working but charge is max %70
when i upload rom with odin, charge is okey but buttons are not working.
i tried a lot of rom but no solved
Related
Good morning, I'm MARCO from Milan Italy. I hope that someone can help me
I have got an Avin unit Avant 2 for BMW E46 purchased on january 2015 with Android 4.4.1 and last firmware release
After two years of perfect run now I have a big problem. I want to make a short summary of avin e46 isuues. (sorry for my bad english)
On the 2th January 2017 in the afternoon I start my car from a park and avin unit run without problem;
After 10 min of travel with navi on, unit stop to run screen become black and when I restart the car or the unit avin logo was showed for a few second and after disappear:
On the 3th January 2017 when I start my car in the mornng unit was run regular but during the day i park my car and when i restart I've got the same issue of day before. So I try to make a soft reset but nothing run (
On the 4th january 2017 I hope then unit start after the night but when I start my car in the morning nothing run. Avin logo appears NOW for less than a second and anything run.
So I wrote an email to Avin support and after I try to:
- check wires and check battery (wires ok battery is a brand new exide plus)
- made reset factory whit power button (8 shot + 1 15 sec as you suggest) result RESET FACTORY DON'T START
- update with sd card in navi slot and reset hole with your software update result UPDATE DON'T START
- remove unit from the car and power in with a 12v dc external power source result SAME ISSUE THAN MOUNTED IN CAR
All thing that I do give me the same response: nothing.... run and avin logo for less then a second (power is ok because red light is on, cd run ecc ecc)
Please someone can help me because buying this quality unit was very expensive I have preferred it for a cinese unit but I need that it works fine. Thank you Marco
When my Avin Avant 2 was bricked i used this link with the malaysk rom.
https://forum.xda-developers.com/showpost.php?p=67184851&postcount=50
Create the sd card with malaysk rom. Put in the sd in the gps slot and set the car to acc. This should start the update. At least thats what happend to my Avin Avant.
THANK YOU my unit think does not boot. Avin logo appears for less than a second
what kind of rom did you choose for Avin Avant 2? Thank you very much Marco
Hi!
I’m still new here and I’m not very experienced. I recently bought a Hi! I’m still new here and I’m not very experienced. I recently bought a Junsun v1 2 / 32Gb headunit. Everything was fine during installation. All cables are in place. (Checked.)
Everything works perfectly except the air conditioning application. The air conditioner buttons on the "plug-in frame" control the air condition, but the app doesn't work. The steering wheel buttons and reversing camera work well except for the air conditioning application. When I start the app it just doesn’t respond to the buttons. The button flashes but does nothing.
I uploaded a video to youtube about the problem. The title of the youtube video is Junsun V1 problem Honda Accord 2007.
I wired everything according to the installation manual.
What could be the problem? Maybe the head unit is bad? Is the device not communicating via CANBUS?
I have already received two types of firmware upgrades from the vendor, but neither helped? Maybe a newer firmware version? What should i check?
Thanks for the help!
Hello I bought junsun 2G +32G Android 10 but after 2 months using device with full function the buttons suddenly stopped working and also I couldnt see any button function on the screen and also even if I couldnt see any funtion on the screen the air condition was also not working and I tried to enter 8888 and 201 also 8888 75 dual conditioner or 8878 75 but nothing changed and the buttons are not working and also my cars air condition is stopped working but when I plug in the original tape recorder the air condition is working I will be glad if you can inform me how do I make the buttons and air condition work again ...I am consent to air condition works even if it is not shown on the screen...And if you have a firmware or something I will be glad to have it...thanks in advance
I usually spend my summers with my grandparents , because I miss them a lot during the year. It is very hot lately and I can't live without an aircon and they have junsun 2G +32G Android 10. But something was wrong about it, because it had some problems. I couldn't see any function on the screen and the aircon pipe leaking and we tried our best to solve it, but did worse, being completely disappointed. After doing several researches on the internet I found a good website , that really saved us,and made my grandparents happy again. Thanks to the professional employees we solved all the problems and we were satisfied of their services.
HI
I have a Seicane head unit. I has been working till today. I have tried soft and hard resets. Power is flowing to the unit.
When i turn on the car ACC switch.....
1. My mazda info display reads Raise Tech
2. the unit fails to boot up
Questions
I am not sure if the issue is on the motherboard or core itself. Is there a way to asses if the core is damaged?
Is it possible to boot off a USB stick instead?
Other suggestion?
TIA
Hello!
I bought a Teyes CC3 in June 2021 for a VW Scirocco R 2012. I managed to install the product and everthing worked fine until this week when i hat to change the battery of the car. After the battery was changed the teyes stopped working. It only works when the car is in reverse mode. When the car is in driving mode the screen turns black. I also did an update of the software but changed nothing. Also checked the fuses and no problem there.
Any advices please?
Hello, I’m having some problems with 2 px6 android 9.0 headunits with display problem, factory won’t give me straight solution yet! Need some help please.
The problem is that after 1 or 2 days installed, the display screen starts to turn off and on really quick and also flickering.
This only happens when units are installed, when I test on a 12v power supply it doesn’t show any problem at all.
I was trying to post some videos but I think can’t do it.
Going to post system info