Hi guys, I have previously posted about my A-sure L2ovb Head unit crashing. Im looking for a way to restore the head unit that runcs on windows embedded automotive 7. I have contacted A-sure but their customer service is shocking.
What happened was the head unit =cut out when it was scolling pictures on the screen from the sd card i inserted.
now, the screen remains black until the reset button is pressed with a pin, then a quick flash of the vauxhall logo would appear on the screen before returing to the previous black screen
I removed the canbus box and run a direct 12v to the yellow wire on the unit and the red on canbus wire to test and it still remain in the same state, So that rules out the canbus box being faulty.
The only option left is to restore/reflash the unit with wince 7 but i cant find any recovery files for it.
Why did i buy from A-sure? its 8 month old and i was told i would be getting 2 years warranty! yeah, maybe if the replied to my Emails!! Though i did love the unit when it was Working.
Any you guys got any advice? I didnt get any replies on the previous post.
Regards Charlie
I am thinking of buying new HU becouse my existing Hu from Hizpo PX3 7.1.2 is kinda wired, mostly because none of beetter DVR cams do not work.
So I am thinking of this one
https://www.aliexpress.com/item/32934575168.html?spm=a2g0o.cart.0.0.78b03c00oKlwsb
anyone have experience with Eunavi HU?
It's similar to the one I have, it has a few problems with my Skoda Octavia.
It boots up every time it powers up taking about 20seconds.
The canbus doesn't work with all the steering wheel buttons.
The default apps are rubbish
The theme is shocking and you can't read the text properly.
Short of the power on issue, it's not too bad.
i see.. original rom I had on hizpo px3 had similar issues, like power up it was even longer.. but with hal9k rom or "malsik" that changed.
I'm still waiting on eunavi sending me the firmware so I can have a look at fixing the problems.
It's not a problem with it booting up each time, trust me.
I have a dash which goes into standby mode and it drains the battery in about 3-5 days of not using the car for a decent drive. I'm forever having to use jumper cables on the battery. I've since installed a switch, although you can use a relay - to make it boot up every time.
I've just bought this unit btw. I'll let you know how it goes in a month. Hopefully it can be modded.
Hi, how is the unit? Have you had any chance to use rca pre outs? I want to buy an android unit but the only thing stopping me is that Subwoofer preout are either of low voltage or doesn't work at all.
The seller claims its a 5v rca pre out for the sub.. Can you confirm this?
---------- Post added at 16:15 ---------- Previous post was at 16:11 ----------
Turbine1991 said:
It's not a problem with it booting up each time, trust me.
I have a dash which goes into standby mode and it drains the battery in about 3-5 days of not using the car for a decent drive. I'm forever having to use jumper cables on the battery. I've since installed a switch, although you can use a relay - to make it boot up every time.
I've just bought this unit btw. I'll let you know how it goes in a month. Hopefully it can be modded.
Click to expand...
Click to collapse
Hi, how is the unit? Have you had any chance to use rca pre outs? I want to buy an android unit but the only thing stopping me is that Subwoofer preout are either of low voltage or doesn't work at all.
The seller claims its a 5v rca pre out for the sub.. Can you confirm this?
same issue here
So I have the same unit and the same power-problem, takes long to startup every time.
Tried swapping +BATT and ACC but that didn't help the drainage.
Also, mine doesn't hold the radio presets and USB2 doesn't work.
Left a message with Ali-E. to help me with this problem.
My car is a 2011 Dacia Sandero Stepway, which is Renault, basically.
**** solved ******
wire was crossed in the pigtail - radio preset hold, eq.settings hold and lots of other stuff fixed by installing Malays full ROM for PX6/STM32
have autI have autoradio android vw Eunavi I need the secret numbers to open the settings and the habit of adjusting the factory.
HI
I have a Seicane head unit. I has been working till today. I have tried soft and hard resets. Power is flowing to the unit.
When i turn on the car ACC switch.....
1. My mazda info display reads Raise Tech
2. the unit fails to boot up
Questions
I am not sure if the issue is on the motherboard or core itself. Is there a way to asses if the core is damaged?
Is it possible to boot off a USB stick instead?
Other suggestion?
TIA
Hi, I have an Android head unit running Android 9 powered by a PX6 chip. It's 4GB/64GB.
The unit started bootlooping some time ago (just stuck at the Android loading screen) and the seller have not been very helpful and wants me to buy a new motherboard for the unit.
Long story short, while waiting for Aliexpress to take responsibility and make the seller uphold the warranty they sell the unit with I was wondering if there is anything I can do myself?
The unit is sealed and I can't reallyd figure out how to get to recovery or anything. Only thing the seller told me to try was using a pin to press the reset button 10 times repeatedly. This had no effect other than the unit restarting however.
Any ideas how to debug such a unit? I don't see any SD cards or similar, unless it is located within the unit shell itself?
There are some USB ports, but I don't have a male to male cable so I haven't tried plugging it into a PC with ADB/fastboot yet...
Hi all, I’ve got a cheap Junsun unit in my 2008 Smart Fortwo and it’s a great piece of kit. But I have a couple of questions if anyone could help..
1- the illumination on the ‘buttons’ stops after the car is switched off and back on the next day. Which is annoying as in the dark you have no idea where the volume is!
2- when the ignition is turned on, the unit fired straight back to where it left off, assuming it’s running in the background and just in sleep mode and draining battery? Should it not completely shut down and then boot from scratch every time?
3- when it does completely shut down and reload, all the time settings have changed and needs to be set again.
Is there a secret menu somewhere that I can change these settings, or is just how this thing works?
This is a link to the unit I have..
2+32G 9" Android 12 Car Radio CarPlay Sat Nav GPS DAB For Smart Fortwo 2005-2010 750250719466 | eBay
Find many great new & used options and get the best deals for 2+32G 9" Android 12 Car Radio CarPlay Sat Nav GPS DAB For Smart Fortwo 2005-2010 at the best online prices at eBay! Free delivery for many products.
www.ebay.co.uk
Thanks in advance
KI know it's irrelevant but. How can I create a new topic in this forum?