Good afternoon. Ask for help. I have a G7 brick. In task Manager is shown as Qualcomm HS-USB Qdloader 9008. Need firmware for QPST. Tell me there is anyone? Or where can be download? And whether it is possible in General to restore it?
hello I have the same problem
after updating could not start anymore I'm looking for such a file but it should not cost G7-L11 XML-DUMP
many thanks
alex_8093 said:
Good afternoon. Ask for help. I have a G7 brick. In task Manager is shown as Qualcomm HS-USB Qdloader 9008. Need firmware for QPST. Tell me there is anyone? Or where can be download? And whether it is possible in General to restore it?
Click to expand...
Click to collapse
same problem. if someone figured out how to repair it please let us know. tnx
Sure same problem here , need xml firmware.
did you guys fix it or not?
i have found a xml software and replaced corrupted files within it, it works now!
the only problem, since i have locked bootloader i had to disassemble phone to short pins to enter EDL mode, which is 9008!
Crixellio said:
did you guys fix it or not?
i have found a xml software and replaced corrupted files within it, it works now!
the only problem, since i have locked bootloader i had to disassemble phone to short pins to enter EDL mode, which is 9008!
Click to expand...
Click to collapse
You could help me with those files and the steps you took in the process.
Will it work on G7-L03?
Hello, Crixellio. I have a Huawei LDN-L01 with this problem. Can you please help me fix it? I hope you can. In any case, thank you
Hello anyone with the bluetooth.default.so for G7-L01
its in /system/lib/hw mind sharing it with me please, cant connect to bluetooth for the time being!
Oh my... i didnt get notified for your questions!! yea sure i can help ya if you still need that help
Izackon said:
You could help me with those files and the steps you took in the process.
Will it work on G7-L03?
Click to expand...
Click to collapse
yeah sure pm if you still need help
lorenzojavier.av said:
Hello, Crixellio. I have a Huawei LDN-L01 with this problem. Can you please help me fix it? I hope you can. In any case, thank you
Click to expand...
Click to collapse
sure pm me if you still need help
Related
is it any way to unbrick my wizard? (IPL/SPL 2.26.0001 on G3 device) or how much is repair?
yes
excuse the noobness but if someone doesnt mind could they explain what unbricking is?
thank you.
MrPresident said:
excuse the noobness but if someone doesnt mind could they explain what unbricking is?
thank you.
Click to expand...
Click to collapse
Bricking is when your phone compleetly dies forever... either because they got a big virous or something on their phone, or they tried to overclock it too much or something. anyway, you can't use your phone and the screen is just black and turned off.
Unbricking is taking your phone (which is bricked) and fix it so it works. hope that helps a little.
I have the same problem, what has many people. I flashed G4 IPL/SPL to my G3 device.
yes
Click to expand...
Click to collapse
I don´t understand. It is software error, but I dont´t know if in the service thy will only reflash, or change rom chip, or whole motherboard.
So now I can´t go to the bootloader untill I get the battery off
unbricking a jasjar
Hi there can anybody please help me to unbrick my jasjar i was trying to do a win 6.5 update using the device software utillity for jasjar that i got from here on this site and it came up with some sort of error and now phone is tuck on a blank screen that says serial on to and v.2.01 on bottom any help would be much appreciated.
are u in melb
Just try this : unbrik
paradix said:
Just try this : unbrik
Click to expand...
Click to collapse
Yes it works!!
I was made unbricking on my wizard.
But now got problem with keyboard.
Anyone know how I could unbrick my Ideos U8150,please????
firstly I'm sorry for my bad English.
my phone does not turn on at all. no download mod, no recovry mod.
I couldn't find the tot files for g4c h525n. does anyone have in hand?
or what is the solution? How Can I solve it?
mucbbb said:
firstly I'm sorry for my bad English.
my phone does not turn on at all. no download mod, no recovry mod.
I couldn't find the tot files for g4c h525n. does anyone have in hand?
or what is the solution? How Can I solve it?
Click to expand...
Click to collapse
Nope. Only with direct EMMC write using a Medusa Box or other box that support this. No other way.
neutrondev said:
Nope. Only with direct EMMC write using a Medusa Box or other box that support this. No other way.
Click to expand...
Click to collapse
I have the same problem because I flashed a h815 rom on my h811. Since I have 2 weeks left on my warranty I will send it in and hope they will fix it for me. What are the chances they would fix a problem like this?
krayziebone99 said:
I have the same problem because I flashed a h815 rom on my h811. Since I have 2 weeks left on my warranty I will send it in and hope they will fix it for me. What are the chances they would fix a problem like this?
Click to expand...
Click to collapse
Had this on a g3 and it was possible to fix with software
Message tung kick to ask if it's possible.... He fixed my g3 within an hour a after I got nowhere in 8 hours
Check your S/N and if starts with 505-509, you'll have to get it fixed at the LG Service Center. They'll replace the MOBO of your G4
XeLiOs512 said:
Check your S/N and if starts with 505-509, you'll have to get it fixed at the LG Service Center. They'll replace the MOBO of your G4
Click to expand...
Click to collapse
I just got it back 2 weeks ago from repair for the bootloop issue and they gave me a refurbished device and it's a 505 again so Im sure I will be fine
Guys i really need your help. I need a working N910G rooted device with custom recovery. My device is Note 4 N910G, but is already deadboot. no ODIN no Recovery not Responding anymore but only detected as Qualcom device in computer. I need someone of my same phone model to flash unbrick creator via custom recovery. It will automatically create unbrick files which will i be needing for to restore back to life my device. I hope someone will kindly upload the file unbrick files created for my device after that I could flash it through my sd card using Win32 disk image loader. Then i will put the sd card on my deadboot phone and see if it goes to download mode. So i really need you guys to help me cause ive not yet exhausted the possibilities yet. i Havent tried this solution yet so if theres anyone whos willing to help could you kindly do it for me. Id really appreciate the thought of it. Thank you very much!!
PS i cant post external links yet so ill try to message it or send the links somewhere else for those willing to help me fix my n910G the unbrick creator file. thank you so much!
if someone might help me this could be the solution for almost all the deadboot issues with the n910G model so i hope someone cooperates and lets try to make the cure
same problem here is there any one one can has solution ???
utsav_jayesh said:
same problem here is there any one one can has solution ???
Click to expand...
Click to collapse
Yeah mine too, my note 4 is also fresh rooted then just wont turn on.
fc14cs said:
Yeah mine too, my note 4 is also fresh rooted then just wont turn on.
Click to expand...
Click to collapse
I wish if i could help you, I'm on stock recovery but @yashthemw might assist you n this..
fc14cs said:
Yeah mine too, my note 4 is also fresh rooted then just wont turn on.
Click to expand...
Click to collapse
Have you referred this thread:
https://forum.xda-developers.com/showthread.php?t=3488114
Reporting Via N910G
have you try jig usb solution ??
usb jig will not work because the boot files are corrupt.
I have a W8 model, can i still use this tool? i would really like to help you as this happened to my s3 and no one helped me.
Hi so my cousin had this LG L fino phone and it had a broken screen so bought a hard bricked phone to a guy online so I can just replace the digitizer to my cousin's phone.
turns out that they got both hard bricked phones thought cousin's phone was only softbricked.
i already tried the flashing KDZ guide but it seems that it's only for the softbricked ones.
so i tried using meganukebmp's guide (the one with extract option) ... the process completed with no errors but I am still unable to boot to download mode on both phones.
PLS HALP ME.
I am discovering this...
I have the same problem but I almost discovered how to fix that. Maybe tomorrow I will continue my solution and write tutorial for this. Sorry for my bad english (I have 13 years XDD)
DavRei said:
I have the same problem but I almost discovered how to fix that. Maybe tomorrow I will continue my solution and write tutorial for this. Sorry for my bad english (I have 13 years XDD)
Click to expand...
Click to collapse
i'm looking forward to it.
IT'S WORKING!!!!!!!!!!!!!! :good::good:
DavRei said:
IT'S WORKING!!!!!!!!!!!!!! :good::good:
Click to expand...
Click to collapse
Nice man!! Did you fix your phone using @meganukebmp 's guide?
proudlytm said:
Nice man!! Did you fix your phone using @meganukebmp 's guide?
Click to expand...
Click to collapse
I think him tutorial is for softbrick. My solution is for super hard brick Qualcomm 9008 mode
Can you post a guide? Hopefully we wont need any octopus box or jtag.
Also @meganukebmp 's guide had both for softbrick and hardbrick.
Its just that the hardbrick tutorial doesnt work for me even if the flashing was successful.
s4h1k0 said:
Can you post a guide? Hopefully we wont need any octopus box or jtag.
Also @meganukebmp 's guide had both for softbrick and hardbrick.
Its just that the hardbrick tutorial doesnt work for me even if the flashing was successful.
Click to expand...
Click to collapse
This didn't work for you because this tutorial is for SOFTWARE BRICK! You must have enter download mode... If you can't (you can't) - this is HARD BRICK. I am making a guide
---------- Post added at 04:37 PM ---------- Previous post was at 04:37 PM ----------
PS: Guide will be shared when files will upload to Google Drive (in a hour)
Ready!
http://forum.xda-developers.com/d290n/how-to/guide-how-to-unbrick-lg-l-fino-qualcomm-t3495192
sorry it went into wrong therad could not delete it for some reason.
Hi guys can anyone share his qcn NVRam file? My phone detects the sim but radio is off
Thanks
you can send it to me with pm. Please is anyone willing to help?
kopap said:
you can send it to me with pm. Please is anyone willing to help?
Click to expand...
Click to collapse
You will need someone with a X722. The only QCN that will work is one from the X722. Sorry I have an X727.
You may be able to get it working by restoring the EFS from a X722 Recovery
tsongming said:
You will need someone with a X722. The only QCN that will work is one from the X722. Sorry I have an X727.
You may be able to get it working by restoring the EFS from a X722 Recovery
Click to expand...
Click to collapse
I found a x722 qcn from 4pda but unfortunately it didn't work. my last resort is a efs from someone. I start to think that maybe is a hardware failure
success phone is working again and volte to
kopap said:
success phone is working again and volte to
Click to expand...
Click to collapse
Good News! :good:
kopap said:
success phone is working again and volte to
Click to expand...
Click to collapse
Hello friend,
Can you shere me the qcn ? I have the same issue.
kopap said:
success phone is working again and volte to
Click to expand...
Click to collapse
Please help, I have same problem too, X722
Prathamesh43 said:
Please help, I have same problem too, X722
Click to expand...
Click to collapse
i have attached the qcn file bare in mind it will change your imei keep a record of your original imei to change it back
You will need qualcomm qpst software download. Make a backup your phones qcn just in case and restore with the one i attached(check allow ESN mismatch)
To use the qualcomm software you will need to enter service mode .If you are using custom rom you will need root to enter with adb command
adb shell
su
setprop sys.usb.config diag,serial_cdev,rmnet,adb
Unfortunately after i fixed my phone it only lasted about 2 months , i got the same no radio problem and since then i cant fixed it .So i use the phone as a remote control/wifi light etc
Thanks a lot. I got the file and know the trick. I also knew the way to enter the diag. mode from dial pad. I will let you know the results after I finish it.