is it any way to unbrick my wizard? (IPL/SPL 2.26.0001 on G3 device) or how much is repair?
yes
excuse the noobness but if someone doesnt mind could they explain what unbricking is?
thank you.
MrPresident said:
excuse the noobness but if someone doesnt mind could they explain what unbricking is?
thank you.
Click to expand...
Click to collapse
Bricking is when your phone compleetly dies forever... either because they got a big virous or something on their phone, or they tried to overclock it too much or something. anyway, you can't use your phone and the screen is just black and turned off.
Unbricking is taking your phone (which is bricked) and fix it so it works. hope that helps a little.
I have the same problem, what has many people. I flashed G4 IPL/SPL to my G3 device.
yes
Click to expand...
Click to collapse
I don´t understand. It is software error, but I dont´t know if in the service thy will only reflash, or change rom chip, or whole motherboard.
So now I can´t go to the bootloader untill I get the battery off
unbricking a jasjar
Hi there can anybody please help me to unbrick my jasjar i was trying to do a win 6.5 update using the device software utillity for jasjar that i got from here on this site and it came up with some sort of error and now phone is tuck on a blank screen that says serial on to and v.2.01 on bottom any help would be much appreciated.
are u in melb
Just try this : unbrik
paradix said:
Just try this : unbrik
Click to expand...
Click to collapse
Yes it works!!
I was made unbricking on my wizard.
But now got problem with keyboard.
Anyone know how I could unbrick my Ideos U8150,please????
Related
Hey guys I have a question. I was trying to create more space on my HD2 a few months ago and my phone went dead. The light doesn't come on to show it's charging and it doesn't show any signs of turning on. I just left the phone but now I think I want to have the phone back on. Is there any way to unbrick the phone to get it back at least working. I was trying to put a new radio on it but I put the wrong version and it complete killed the phone. Any help or suggestions to getting this problem fix.
Thanks
kasualnupe2 said:
Hey guys I have a question. I was trying to create more space on my HD2 a few months ago and my phone went dead. The light doesn't come on to show it's charging and it doesn't show any signs of turning on. I just left the phone but now I think I want to have the phone back on. Is there any way to unbrick the phone to get it back at least working. I was trying to put a new radio on it but I put the wrong version and it complete killed the phone. Any help or suggestions to getting this problem fix.
Thanks
Click to expand...
Click to collapse
1) where did you get the idea that flashing a radio created more space?
2) If you flashed an incompatible radio then there is no unbricking except jtag
Orangekid is right the only fix it to have it JTAGed. Contact me via PM and I can reffer you to someone that offers this servos if you want it unbricked.
Edit: Sorry I had not checked my inbox yet and read your message.
orangekid said:
1) where did you get the idea that flashing a radio created more space?
2) If you flashed an incompatible radio then there is no unbricking except jtag
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=668347
some have unbricked it using that method
no jtag necessary. if not jtag is your option
domineus said:
http://forum.xda-developers.com/showthread.php?t=668347
some have unbricked it using that method
no jtag necessary. if not jtag is your option
Click to expand...
Click to collapse
that relies on being able to get into bootlaoder.
domineus said:
http://forum.xda-developers.com/showthread.php?t=668347
some have unbricked it using that method
no jtag necessary. if not jtag is your option
Click to expand...
Click to collapse
The title of that thread needs to be changed. A truly bricked HD2 will not even turn on which means you can not get to the bootloader. A truly bricked HD2 is bricked because the SPL of bootloader has gotten screwed up and it cannot boot any of the software. Hence the phone can not turn on, hence the term "brick" because it is a useless brick. If someone has a phone that that they can still get to bootloader with it is not bricked. A phone like that is just havering software or user difficulties and can in most cases be fixed, unless it is a hardware problem. Even then it can be fixed just not by flashing different software.
domineus said:
http://forum.xda-developers.com/showthread.php?t=668347
some have unbricked it using that method
no jtag necessary. if not jtag is your option
Click to expand...
Click to collapse
Dude, If you can get into the bootloader its not "bricked" obviously.
When you flash a EU radio to a US HD2 you do a "real" brick not just a n00by flashing problem.
orangekid said:
1) where did you get the idea that flashing a radio created more space?
Click to expand...
Click to collapse
Most likely got mixed up between RAM and ROM and thought that it would enable more storage instead of ram.
Either way he deserves the brick for not reading/researching properly before messing about with his device.
you do realize that thread was made for exactly what everyone is referring to right?
when someone flashes a eu radio/rom on their device right and renders it useless...its an old thread but some users have reported success.
however if it is a bl issue it won't work
I should've said that
domineus said:
you do realize that thread was made for exactly what everyone is referring to right?
when someone flashes a eu radio/rom on their device right and renders it useless...its an old thread but some users have reported success.
however if it is a bl issue it won't work
I should've said that
Click to expand...
Click to collapse
I think we do realize that thread was started to try to help people. But that does not change the fact that if you flash a x.xx.51.xx radio (which are EU radios) or a 2.04.50.xx or a 2.05.50.xx radio (which are test radios) to a TMOUS HD2 it will, not maybe, but will brick a HD2. This is a Bootloader issue when you do this. So again that threads title needs to be changed and it is useless to the OP.
As T-Mac said, this is a physical brick. That phone is not going to power on again until it get's JTAG resurrected.
Hi i have managed to hard brick my NOTE 3 N9005 International version <<stupid i know
I really need someone to help me ( a developer possibly??) and help me obtain the UNBRICK.img from the note 3 source code for the
N9005 so i can mount it to a SD card via Linux. As this is impossble for me to get myself (as my phone is hard bricked which means i cant turn it on!) i really need help
a similair unbrick image and unbrick method can be found here>> http://forum.xda-developers.com/show....php?t=2476353
(but that image cant work for my n3 version)
Any body who helps will recieve a nice donation for their hard work (providing it works)
Thanks community for taking the time to read my message.
I am new here sorry if i have broken any posting rules
Sayid_Jarah said:
Hi i have managed to hard brick my NOTE 3 N9005 International version <<stupid i know
I really need someone to help me ( a developer possibly??) and help me obtain the UNBRICK.img from the note 3 source code for the
N9005 so i can mount it to a SD card via Linux. As this is impossble for me to get myself (as my phone is hard bricked which means i cant turn it on!) i really need help
a similair unbrick image and unbrick method can be found here>> http://forum.xda-developers.com/show....php?t=2476353
(but that image cant work for my n3 version)
Any body who helps will recieve a nice donation for their hard work (providing it works)
Thanks community for taking the time to read my message.
I am new here sorry if i have broken any posting rules
Click to expand...
Click to collapse
im not a developer but can you get to download mod
jaythenut said:
im not a developer but can you get to download mod
Click to expand...
Click to collapse
hey thanks for the reply,
no as the phone is hard bricked its 100% unusable, if it would even switch on that would be fantastic.
its more complex than soft brick.
im having the same problem... is your note alive again?
Return it and claim warranty, tell them that your phone suddenly went off and that you don't know the reason. They may replace the board for you.
wow thats sad
h2s said:
Return it and claim warranty, tell them that your phone suddenly went off and that you don't know the reason. They may replace the board for you.
Click to expand...
Click to collapse
the thing is.. is not even mine... is from a client... and a friend was trying to unlock it and the phone came to my hands that way... and now i think my friend must pay for it... wow... what an expensive one...
not even a jtag interface to repair the dead boot... wow..
vickcar13 said:
the thing is.. is not even mine... is from a client... and a friend was trying to unlock it and the phone came to my hands that way... and now i think my friend must pay for it... wow... what an expensive one...
not even a jtag interface to repair the dead boot... wow..
Click to expand...
Click to collapse
Then it's up to you to convince your client to return it to Samsung for warranty. As for recovering his data, that is the hard part.
Sayid_Jarah said:
Hi i have managed to hard brick my NOTE 3 N9005 International version <<stupid i know
I really need someone to help me ( a developer possibly??) and help me obtain the UNBRICK.img from the note 3 source code for the
N9005 so i can mount it to a SD card via Linux.
...
Click to expand...
Click to collapse
Do you mean the bootloader that needs to be written as T-Flash to a microsd using Odin 3.09 or higher? (as per 13-58_SM-N900_Boot_Recovery_Guide_rev1.0.pdf) Isn't that just the same as sboot.bin written raw to first sectors of microsd?
I would be interested to hear if you managed to use that just for the "extreme hacking" angle of it :good:
h2s said:
Return it and claim warranty, tell them that your phone suddenly went off and that you don't know the reason. They may replace the board for you.
Click to expand...
Click to collapse
Yes that's precisely what I did back in October
xclub_101 said:
Do you mean the bootloader that needs to be written as T-Flash to a microsd using Odin 3.09 or higher? (as per 13-58_SM-N900_Boot_Recovery_Guide_rev1.0.pdf) Isn't that just the same as sboot.bin written raw to first sectors of microsd?
I would be interested to hear if you managed to use that just for the "extreme hacking" angle of it :good:
Click to expand...
Click to collapse
hi sorry way over my head
this was back in October. I tried using an unbrick.img for the sm905 N3 Flashed to microsd and I was supposed to just
put in the sd card in my phone so it could boot into download mode but was unsuccessful as I needed an unbrick.img made up for my device
model sm9005. hope that helps.
Thanks
Sayid_Jarah said:
hi sorry way over my head
this was back in October. I tried using an unbrick.img for the sm905 N3 Flashed to microsd and I was supposed to just
put in the sd card in my phone so it could boot into download mode but was unsuccessful as I needed an unbrick.img made up for my device
model sm9005. hope that helps.
Thanks
Click to expand...
Click to collapse
I do not think the microsd is enough - the Note3 ONLY boots from microsd if you short R4075 on the mainboard - there is a notice from Samsung service somewhere around with a name like 13-58_SM-N900_Boot_Recovery_Guide_rev1.0.pdf that describes the details (and comes with a good picture of what you need to short).
Riff box . Jtag will fix it :^) ..
Sent from my SM-N9005 using xda app-developers app
tidy said:
Riff box . Jtag will fix it :^) ..
Sent from my SM-N9005 using xda app-developers app
Click to expand...
Click to collapse
From personal experience or in theory?
Also link to that pdf......not my link just found via google.
http://www.mediafire.com/download/jkw1vv95ub8596h/13-58_SM-N900_Boot_Recovery_Guide_rev1.0.pdf
Kind if sad.. Im from venezuela and the clustomer bought the phone in france.. And he's not comming back just for warranty.. Wait for riff for restore it.. Is not available yet..
Sent from my iPhone using Tapatalk
bricked without ability to flash to odin
jaythenut said:
im not a developer but can you get to download mod
Click to expand...
Click to collapse
I have the same problem -but a recovery loop. I can't get my phone into either download or recovery mode. So what options are there to fix this loop?
bedtek said:
I have the same problem -but a recovery loop. I can't get my phone into either download or recovery mode. So what options are there to fix this loop?
Click to expand...
Click to collapse
Take the battery out to power off the device then try getting into Download mode, reflash your Firmware and voila you're good to go
bedtek said:
I have the same problem -but a recovery loop. I can't get my phone into either download or recovery mode. So what options are there to fix this loop?
Click to expand...
Click to collapse
If you did not fix it in any other way maybe you need to look at this thread:
http://forum.xda-developers.com/showthread.php?t=2625332
Please post there if you get any results.
Hello! everyone firstly this post is for my friend! he has a G2 d800 and accidentally his IMEI got NULL due to something unexpected he did now he is trying to resolve it but its not happening and he even tried going to service center but they said they can repair it as it is not a n india piece! so please help me guys everything working fine just his IMEI has gone to NULL and sim slot not working please help guys!
use EFS pro..
rahul8040 said:
he has a G2 d800 and accidentally his IMEI got NULL due to something unexpected he did
Click to expand...
Click to collapse
Before giving an answer we're going to need a little more information. What steps did he do prior to losing his IMEI, did he flash a custom rom, custom radio, or did it just magically vanish?
d00lz said:
Before giving an answer we're going to need a little more information. What steps did he do prior to losing his IMEI, did he flash a custom rom, custom radio, or did it just magically vanish?
Click to expand...
Click to collapse
when i tried to install TWRP using AutoRec.apk nd due to different model it goes to fastboot mode to fix this i tried to flash laf.img nd aboot.img nd boot.img bt then again due to wrong model phone got hard bricked then to fix this i had to open the back cover and short circuit to points and after several different flashes of different files i recovered the phone but with null imei nd unknown baseband
Sindroid said:
use EFS pro..
Click to expand...
Click to collapse
dont know how to use it! is there or something! can u please tell me how to use it?
HELP ME?!!!
CAN ANYONE PLEASE HELP ME? what kind of forum is this?
_____________________________________Read more write less and be smart
rahul8040 said:
CAN ANYONE PLEASE HELP ME? what kind of forum is this?
Click to expand...
Click to collapse
What kind of a user are you? Anyway, do you still have the box of your phone with the imei on it?
roboMr.Burns said:
What kind of a user are you? Anyway, do you still have the box of your phone with the imei on it?
Click to expand...
Click to collapse
yes i have it!
Sindroid said:
use EFS pro..
Click to expand...
Click to collapse
I have the same problem, however EFS pro can't read from the phone. It keeps disconnecting...
Hey there guys.
I'm a portuguese guy and i've bought a Meizu Note M2.
Today i've tried to make a firware update and trying to install a rom i've found on this forum of CM12.
Now my Cellphone won't turn on, it's completely dead, and when i try to connect to pc he makes 2 noises and won't connect to pc
What can i do?I'm desperate
that's sad.
JayP86 said:
Hey there guys.
I'm a portuguese guy and i've bought a Meizu Note M2.
Today i've tried to make a firware update and trying to install a rom i've found on this forum of CM12.
Now my Cellphone won't turn on, it's completely dead, and when i try to connect to pc he makes 2 noises and won't connect to pc
What can i do?I'm desperate
Click to expand...
Click to collapse
Why you have flashed an rom for the MX4 on your m2?
Naphtha said:
Why you have flashed an rom for the MX4 on your m2?
Click to expand...
Click to collapse
Cause i was stupid to think that it wouldn't make a difference.
I'm asking for help and people i'm just answering by asking why i did that, i was stupid, move on.
Can somebody help me with this? If it's hard bricked is there something i can do?
JayP86 said:
Cause i was stupid to think that it wouldn't make a difference.
I'm asking for help and people i'm just answering by asking why i did that, i was stupid, move on.
Can somebody help me with this? If it's hard bricked is there something i can do?
Click to expand...
Click to collapse
You can't do nothing
Naphtha said:
You can't do nothing
Click to expand...
Click to collapse
Ok, thanks!:good:
Try to flash the original Flyme ROM and if u ca n't or your recovery doesn't works, well done bro u need to send it back to factory for it's fully bricked. Good luck!
like me it so crying loud
aaawqw said:
Try to flash the original Flyme ROM and if u ca n't or your recovery doesn't works, well done bro u need to send it back to factory for it's fully bricked. Good luck!
Click to expand...
Click to collapse
its began when I unlock bootloader and install twrp
now the only thing i can is pray to some one that make firmware m2note flasheble flashtool :crying::crying::crying::crying::crying::crying::crying:
issac12 said:
its began when I unlock bootloader and install twrp
now the only thing i can is pray to some one that make firmware m2note flasheble flashtool :crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
same problem here...it gave me an error when flashing recovery, and my phone wont work anymore...
visit this thread got to the part of UNBRICK A PAPERWEIGHT
HERE
Hello,
I need some help with my phone Motorola G4 play, I tried to flash it and unlock the bootloader following this forum indications - https://forum.xda-developers.com/g4-play/how-to/guide-return-to-stock-firmware-recovery-t3551797 - and now it can not start up, after it I tried to Relock the bootloader following this another one forum - https://forum.xda-developers.com/g4-play/how-to/guide-relock-bootloader-t3590041 - and it doens´t work still, so, I don´t know nothing more to do, I really would appreciate your help.
I thank you very much your help!
Ruxell said:
Hello,
I need some help with my phone Motorola G4 play, I tried to flash it and unlock the bootloader following this forum indications - https://forum.xda-developers.com/g4-play/how-to/guide-return-to-stock-firmware-recovery-t3551797 - and now it can not start up, after it I tried to Relock the bootloader following this another one forum - https://forum.xda-developers.com/g4-play/how-to/guide-relock-bootloader-t3590041 - and it doens´t work still, so, I don´t know nothing more to do, I really would appreciate your help.
I thank you very much your help!
Click to expand...
Click to collapse
Wrong forum mate, it's g4 plus forum here...
Ruxell said:
I need some help with my phone Motorola G4 play, I tried to flash it and unlock the bootloader following this forum indications - https://forum.xda-developers.com/g4-play/how-to/guide-return-to-stock-firmware-recovery-t3551797 - and now it can not start up, after it I tried to Relock the bootloader following this another one forum - https://forum.xda-developers.com/g4-play/how-to/guide-relock-bootloader-t3590041 - and it doens´t work still, so, I don´t know nothing more to do, I really would appreciate your help.
I thank you very much your help!
Click to expand...
Click to collapse
strongst said:
Wrong forum mate, it's g4 plus forum here...
Click to expand...
Click to collapse
Your post is in the correct forum (Yep - G4 Play; don't understand @strongst's response). Unfortunately, don't have a fix as I would not have followed that procedure. Not saying it was 'wrong' just would have gone a different path. Which variant do you have (eg: X1607)?
Davey126 said:
Your post is in the correct forum (Yep - G4 Play; don't understand @strongst's response). Unfortunately, don't have a fix as I would not have followed that procedure. Not saying it was 'wrong' just would have gone a different path. Which variant do you have (eg: X1607)?
Click to expand...
Click to collapse
It was posted in the wrong forum(g4 plus) until a mod moves it and you see it in the G4 play forum. I reported this thread to move to a different forum earlier...
Davey126 said:
Your post is in the correct forum (Yep - G4 Play; don't understand @strongst's response). Unfortunately, don't have a fix as I would not have followed that procedure. Not saying it was 'wrong' just would have gone a different path. Which variant do you have (eg: X1607)?
Click to expand...
Click to collapse
Yes, the variant of my phone is X1607, thank you very much for replying!
Nothing yet?
Hello there... I hope you all are doing well... I´m still waiting for you help with my phone... Is there any advance with fixing this problems with Motorolas G4 Play??
Try downloading the firmware of your device then use one of the various flashing threads in the device area. (I'll edit w/ some links once I get them)
https://forum.xda-developers.com/g4-play/how-to/guide-return-to-stock-firmware-recovery-t3551797 (try this link )
Thank you!
xeonyt12 said:
Try downloading the firmware of your device then use one of the various flashing threads in the device area. (I'll edit w/ some links once I get them)
https://forum.xda-developers.com/g4-play/how-to/guide-return-to-stock-firmware-recovery-t3551797 (try this link )
Click to expand...
Click to collapse
Thank you very much! I appreaciate your help! But, if you notice, this link is in my help request, and it is because this procedura was the one that damaged the bootloader of my phone ((((
Ruxell said:
Thank you very much! I appreaciate your help! I will try this one option and after I will let you know what happened
Click to expand...
Click to collapse
No problem. Good luck
Ruxell said:
Thank you very much! I appreaciate your help! But, if you notice, this link is in my help request, and it is because this procedura was the one that damaged the bootloader of my phone ((((
Click to expand...
Click to collapse
I am thinking too unlocking my bootloader, is it safe?
Ashish88 said:
I am thinking too unlocking my bootloader, is it safe?
Click to expand...
Click to collapse
I did not encounter any problems on two 1607's. Be sure to read up on post unlock procedures if you plan to install TWRP and/or a custom ROM.
Ashish88 said:
I am thinking too unlocking my bootloader, is it safe?
Click to expand...
Click to collapse
You should check if your bootloader can be unlocked, visit the website of Motorola or research in Google. If you bought your phone in Amazon I don´t recomend you to unlock it because you will damage it as I did with mine.
solucion : instala twrp y ponle su rom stock
Ruxell said:
Thank you very much! I appreaciate your help! But, if you notice, this link is in my help request, and it is because this procedura was the one that damaged the bootloader of my phone ((((
Click to expand...
Click to collapse
It's official firmware and it will flash the bootloader.
jcolongo said:
It's official firmware and it will flash the bootloader.
Click to expand...
Click to collapse
I tried, but it can´t be unlocked and my phone continue without can´t load (
Hello my friends... Is there any solution to this issue yet?
Ruxell said:
Hello my friends... Is there any solution to this issue yet?
Click to expand...
Click to collapse
Type this:
Fastboot oem config fsg-id ""
Fastboot reboot