Database Users

Stock A500FU PERMISSIVE kernel needed

Right so many of us use stock rom on A500FU (2015) as its a good daily driver. Not the issue is I'm useless at compiling so is there anyone who can compile a stock kernel but... permissive as standard for us viper4android users and other reason, I'm sure there are 1000s who would appreciate it. I can provide the stock boot if nessacary
Sent from my SM-A500FU

jimbomodder said:
Right so many of us use stock rom on A500FU (2015) as its a good daily driver. Not the issue is I'm useless at compiling so is there anyone who can compile a stock kernel but... permissive as standard for us viper4android users and other reason, I'm sure there are 1000s who would appreciate it. I can provide the stock boot if nessacary
Sent from my SM-A500FU
Click to expand...
Click to collapse
Here you go:
A500FUXXU1BOL1_permissive_boot
.

ashyx said:
Here you go:
A500FUXXU1BOL1_permissive_boot
.
Click to expand...
Click to collapse
Thanks man but it hangs on splash then reboots constantly
Sent from my SM-A500FU

jimbomodder said:
Thanks man but it hangs on splash then reboots constantly
Sent from my SM-A500FU
Click to expand...
Click to collapse
Which firmware build are you on?
Can you post up your boot.img?
Try this one: A500FUXXU1BOL1_permissive_boot

ashyx said:
Which firmware build are you on?
Can you post up your boot.img?
Click to expand...
Click to collapse
Here you go

ashyx said:
Which firmware build are you on?
Can you post up your boot.img?
Try this one: A500FUXXU1BOL1_permissive_boot
Click to expand...
Click to collapse
Get kernel warning but just hangs at splash.
Sent from my SM-A500FU

jimbomodder said:
Get kernel warning but just hangs at splash.
Sent from my SM-A500FU
Click to expand...
Click to collapse
I have recompiled the kernel with no changes except set the enforcing flag to false and used your ramdisk.
If this doesn't boot then Samsungs source code is probably borked.
I have also uploaded a simply unpacked and repacked kernel with absolutely no changes. If this doesn't boot then there's an issue with simply repacking the kernel which could be because it is unsigned. This is not the first time Ive had this happen.
https://www.androidfilehost.com/?fid=24533103863137813
https://www.androidfilehost.com/?fid=24533103863137814

ashyx said:
I have recompiled the kernel with no changes except set the enforcing flag to false and used your ramdisk.
If this doesn't boot then Samsungs source code is probably borked.
I have also uploaded a simply unpacked and repacked kernel with absolutely no changes. If this doesn't boot then there's an issue with simply repacking the kernel which could be because it is unsigned. This is not the first time Ive had this happen.
https://www.androidfilehost.com/?fid=24533103863137813
https://www.androidfilehost.com/?fid=24533103863137814
Click to expand...
Click to collapse
First one hangs, second boots with the warning

jimbomodder said:
First one hangs, second boots with the warning
Click to expand...
Click to collapse
This is the exact same situation I had with the Tab A which uses the same platform and source code: Qualcomm MSM8916 Snapdragon 410.
Looks like again Samsung have fudged up the kernel source.
Are you able to set permissive via ADB or SElinux changer?

ashyx said:
This is the exact same situation I had with the Tab A which uses the same platform and source code: Qualcomm MSM8916 Snapdragon 410.
Looks like again Samsung have fudged up the kernel source.
Are you able to set permissive via ADB or SElinux changer?
Click to expand...
Click to collapse
Yeah selinux changer works fine. Thanks for the efforts

jimbomodder said:
Yeah selinux changer works fine. Thanks for the efforts
Click to expand...
Click to collapse
Well you're lucky that actually works. It usually doesn't.
Are you sure it states permissive in settings after using SElinux changer?

ashyx said:
Well you're lucky that actually works. It usually doesn't.
Are you sure it states permissive in settings after using SElinux changer?
Click to expand...
Click to collapse
Yes I check it, now and again Google flags as dangerous but I keep it lol
Sent from my SM-A500FU

jimbomodder said:
Yes I check it, now and again Google flags as dangerous but I keep it lol
Sent from my SM-A500FU
Click to expand...
Click to collapse
Any chance I can see a screen shot of that as its unusual?

ashyx said:
Any chance I can see a screen shot of that as its unusual?
Click to expand...
Click to collapse
The dangerous part? It normal as ive allowed google to check for harmful apps and an app they changes the selinux is dangerous to google, ill get one soon as currently on RR
Sent From either S4, S4 mini, S5 neo, A500FU, T210, T230

jimbomodder said:
The dangerous part? It normal as ive allowed google to check for harmful apps and an app they changes the selinux is dangerous to google, ill get one soon as currently on RR
Sent From either S4, S4 mini, S5 neo, A500FU, T210, T230
Click to expand...
Click to collapse
Just the about page where it says permissive.

ashyx said:
Just the about page where it says permissive.
Click to expand...
Click to collapse
I'll get it later today:good:

ashyx said:
Just the about page where it says permissive.
Click to expand...
Click to collapse
Better late than never

Highly unusual, every single Samsung 5.1.1 kernel I have compiled always has the enforcing flag set in the configuration without the ability to override unless the kernel is custom.

ashyx said:
Highly unusual, every single Samsung 5.1.1 kernel I have compiled always has the enforcing flag set in the configuration without the ability to override unless the kernel is custom.
Click to expand...
Click to collapse
Well it's actually 5.0.2, I just changed it in build prop. I also deleted some of the security apks and no longer get a warning that it's permissive and need to reboot, also the smart manager says system is secure. Running viper4android just fine

Samsung On7 Hybrid 5.1.1

Samsung On7 Hybrid​
Features
¤ Deodexed.
¤ Zipaligned (better ram)
¤ Dolby atmos added.
¤ Download Booster.
¤ Explosion Kernel added.
Download Link
Remember, I'm not responsible for what you flash.
Latest link[G530F/H/M]: [url]https://drive.google.com/file/d/0B2fbJbmCWnIKR1ZWXzNKbEhkcmc/view?usp=sharing[/URL]
Camera Fix (Thanks to @KoSett): Coming soon.
ROM Installation process
1) Go to TWRP based recovery.
2) FULL WIPE is highly recommended!
3) Install the zip file from SDcard.
4) Swipe to Install.
5) Wait!
6) Reboot.
7) Hurry to Camera Settings and set from 9.6MP to 8.0MP
8) Flash the updated Camfix.zip (Thanks to @KoSett)
9) Thats it! Enjoy!!
Credits
Learnt a lot about porting roms from @KoSett
Explosion kernel Thanks @CarlosArriaga
XDA DevDB Information
Samsung On7 Hybrid , ROM for the Samsung Galaxy Grand Prime
Contributors
Eden532
ROM OS Version: 5.1.x Lollipop
ROM Firmware Required: Galaxy Grand Prime
_____________________________________________
Version Information
Status: Stable
_____________________________________________
Created 2017-03-21
Last Updated 2017-04-20
_____________________________________________

Screenshots

This rom works with G530FZ?

HugoDEV said:
This rom works with G530FZ?
Click to expand...
Click to collapse
I have g530f, (sim doesnt work) If you can test it would be great? (But i build it for g530f) If it doesnt work, ill try to port it for g530fz, but right now i have my exams going on..
Can someone test for G530H too? (After i upload the rom)

@KoSett ,Please I need your help on fixing sim and Camera, Check the updated link- https://mega.nz/#!GUcVTJ7J!5UsCaxf4qqnPifv3ice_N4V30bgtlv9v6q4HCQsOirI , In This one i removed setup wizard and added su.d ..

OMG,,,, Young bro ....You are so good. keep it up your job.
I will help you ...I will check later.don't worry for that.
Tell me first ,You completely used my guide?

Thanks @KoSett
I installed Unbuntu, used kitchen and then i put some build.prop tweaks, Thats it! The guide really worked great for me!
And yeah i also had to replace wpa supplicant to fix "Cannot connect to network" error..

Eden532 said:
Thanks @KoSett
I installed Unbuntu, used kitchen and then, the guide for porting by you and then i put some build.prop tweaks, Thats it! The guide really worked great for me!
And yeah i also had to replace wpa supplicant to fix "Cannot connect to network" error..
Click to expand...
Click to collapse
zip archive not workk !!!!!!!!!!!!!

I currently porting 530F custom kernel to work on android 6.0.
Stuck on bootloop.
Eden
Build props tweak doesn't work like adsbloker's thread.
If you add from him you will get no internet connection.
Try simply first
Then add nd test .
For camera replace /system/bin/mmcameraqdaemon

Is it working on 530H ?
Sent from my SM-G530H using XDA Labs

Sahin551 said:
Is it working on 530H ?
Sent from my SM-G530H using XDA Labs
Click to expand...
Click to collapse
Yeah it should but maybe with less bugs or more bugs
Actually we need someone to test it
Can u test it
I don't have data pack right now cant download

abooooood said:
Yeah it should but maybe with less bugs or more bugs
Actually we need someone to test it
Can u test it
I don't have data pack right now cant download
Click to expand...
Click to collapse
Sorry I can't...
i don't have data pack too. I have wifi at home but
i'm not at home right now
I will test it just 5 days later
Sent from my SM-G530H using XDA Labs

abooooood said:
Yeah it should but maybe with less bugs or more bugs
Actually we need someone to test it
Can u test it
I don't have data pack right now cant download
Click to expand...
Click to collapse
Ok so i downloaded the rom but sadly the zip is corrupt or has some error please fix this!?

asarre said:
zip archive not workk !!!!!!!!!!!!!
Click to expand...
Click to collapse
G530H? Was it corrupt or Status 7 error?

KoSett said:
I currently porting 530F custom kernel to work on android 6.0.
Stuck on bootloop.
Eden
Build props tweak doesn't work like adsbloker's thread.
If you add from him you will get no internet connection.
Try simply first
Then add nd test .
For camera replace /system/bin/mmcameraqdaemon
Click to expand...
Click to collapse
And internet works fine for me.
This is 5.1.1 itself..
The zip works right?
Build.prop tweaks from here
https://forum.xda-developers.com/grand-prime/general/lollipop-build-prop-tweaks-t3188026

Ill update the link, and verify its fine for flashing,
And ill do that @KoSett .. Can Expect it soon

Eden532 said:
Ill update the link, and verify its fine for flashing,
And ill do that @KoSett .. Can Expect it soon
Click to expand...
Click to collapse
It downloads fine but when i try to extract it , shows corrupt zip or file error and also in twrp it shows corrupt zip and im SM-G530H XXU

Ok ill fix it soon, im sorry guys!
Ill port the files from Nameless J5 for G530H, Sure guys! But cant figure out Sim fix ..
My net moves around 75kbps so, it may take time

Can someone upload G530H boot.img? Net too slow to download entire J5.. Please?

KoSett said:
I currently porting 530F custom kernel to work on android 6.0.
Stuck on bootloop.
Eden
Build props tweak doesn't work like adsbloker's thread.
If you add from him you will get no internet connection.
Try simply first
Then add nd test .
For camera replace /system/bin/mmcameraqdaemon
Click to expand...
Click to collapse
mmcameraqdaemon replaced cam still not working, now shows "Camera failed" and not "Mediaserver failed"
About SIM error..
It shows no service but the sim is detected i can see my sim's Carrier in the sim toolkit, And when i go to settings > mobile networks the "com.android.phone has stopped" message pops up force closing the settings app.

[ROM][8.0.0][UNOFFICIAL][STOCK][TESTING] Bullhead X ROM v1 [4/8/2017]

THE ANDROID O
Code:
/*
* Your warranty is void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
I DON'T HAVE THIS PHONE !
THIS ROM IS NOT TESTED BY ME OR ANYONE YET
SO, THIS IS STRICTLY AN ALPHA BUILD
WAIT FOR SOMEONE TO TEST THIS ROM​FEATURES
-Based on 8.0.0 developer preview "bullhead-opp4.170623.014-factory-e37b9eae.zip"
-Rooted
- Busybox
- su.d support
- Debloated
- init.d support
- boot.img (insecured)
- dm-verity (disabled)
- forceencrypt (disabled)
Still not debloated & zipaligned​INSTALLATION
- Copy zip to your sdcard
- Go to recovery TWRP
- Make a full Wipe & cache
- Install the Bullhead_X.zip
- Install OpenGapps
- Wipe dalvik cache
- Reboot​
DOWNLOADS
LINK : MODERATOR EDITED - DOWNLOAD LINK REMOVED!​NOTE : ONCE AGAIN , THIS IS STRICTLY AN ALPHA BUILD & UNTESTED ROM​
XDA:DevDB Information
Bullhead X, ROM for the LG Nexus 5X
Contributors
princevirus, SuperR.
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Stock 7.0 or Above
Version Information
Status: Testing
Created 2017-08-04
Last Updated 2017-08-09

Anyone test the ROM?!

Luca Toni said:
Anyone test the ROM?!
Click to expand...
Click to collapse
Nope, i don't think so . . . .
Eagerly waiting for someone to test . . . .

I did, stuck at google logo

herrieberry said:
I did, stuck at google logo
Click to expand...
Click to collapse
You make a full wipe or just data and dalvik?!

herrieberry said:
I did, stuck at google logo
Click to expand...
Click to collapse
How much time it takes ??
Have you used latest TWRP ?
OKAY So, I am going to solve the problem until then Try clean installation once again , Luck by chance if it works :good:

I make clean install ,wipe system data dalvik and stuck in google logo for 10 min and more .

herrieberry said:
I did, stuck at google logo
Click to expand...
Click to collapse
Luca Toni said:
I make clean install ,wipe system data dalvik and stuck in google logo for 10 min and more .
Click to expand...
Click to collapse
Here is the new zip https://drive.google.com/open?id=0B2mLc8rLgcfrWU45cnhuVXlTUGs
Inshallah this will work !

What is the meaning of this rom?

No,it's not working,stuck in google again
princevirus said:
Here is the new zip https://drive.google.com/open?id=0B2mLc8rLgcfrWU45cnhuVXlTUGs
Inshallah this will work !
Click to expand...
Click to collapse

Can you please add features pixl for the rom

@monzer: means, you could boot?

Sigray said:
What is the meaning of this rom?
Click to expand...
Click to collapse
This rom is based on Android version 8 Final developer preview !!!

monzer said:
Can you please add features pixl for the rom
Click to expand...
Click to collapse
Did it work for you ????

Luca Toni said:
No,it's not working,stuck in google again
Click to expand...
Click to collapse
I don't know why this occurs again and again :crying:
I want someones help, bcuz this is very new version and I can't figure out the problem exactly !

princevirus said:
I don't know why this occurs again and again :crying:
I want someones help, bcuz this is very new version and I can't figure out the problem exactly !
Click to expand...
Click to collapse
Someone must catch the log from boot and see whats the problem.

Luca Toni said:
Someone must catch the log from boot and see whats the problem.
Click to expand...
Click to collapse
Yeah thats the only option, but who will do it ?

princevirus said:
Yeah thats the only option, but who will do it ?
Click to expand...
Click to collapse
I don't have time sorry

princevirus said:
I don't know why this occurs again and again :crying:
I want someones help, bcuz this is very new version and I can't figure out the problem exactly !
Click to expand...
Click to collapse
Seems like your system image was built not properly. Best way to make system images for stock-based ROMs is making system on device and getting system.img with dd. But you don't have Nexus 5X :/

argraur said:
Seems like your system image was built not properly. Best way to make system images for stock-based ROMs is making system on device and getting system.img with dd. But you don't have Nexus 5X :/
Click to expand...
Click to collapse
When i am building it with assayyed kitchen it was showing me
Code:
file_contexts not found, your rom contains bug or it will not boot properly
So, i think this is why it is not booting !
When i am working on its developer preview 3, i have noticed that "build.prop" file was not there and the information was not showing in the kitchen
but in DP4 everything is there except "file_contexts"

[Abandoned][MIUI 10][PIE][mido][PORT]

Development abandoned by onlyninja.
Thankyou for testing.
Development has been abandoned due to further exams. Will not be able to push update or fix bugs. Please use port by Oleg Polisen or ranmengcat.
Thanks for sticking by. Have a good day.
Last build (Unstable):
https://drive.google.com/folderview?id=1st27uaede2KfB89pqCnIS1tFZg0pPtn6
Not recommended for daily use.

What languages avaiable? Only chinese and english?

reserved

dj_torok said:
What languages avaiable? Only chinese and english?
Click to expand...
Click to collapse
Updated. Multilingual. More than 30+ language support.

ceza1380 said:
Link:
https://drive.google.com/drive/mobile/folders/1EAdaIVEJs6-5q0gmuCInegioY9alv580
Click to expand...
Click to collapse
Can't download.. Exceeded message.. What to do.?

copy to your drive n download

onlyninja said:
Yes. As it is from official Chinese ROM. Next build is based on Xiaomi.eu So more languages will come.
Click to expand...
Click to collapse
Thx for a hard work.
This rom has a fingerprint unlock delay like custom pie roms?

dj_torok said:
Thx for a hard work.
This rom has a fingerprint unlock delay like custom pie roms?
Click to expand...
Click to collapse
Try it for yourself. I thinks it's fast.

if i didnt flash the china rom and restored the miui pie backup . on the first boot it wont ask my mi account ?.

ThanveerAliSayed said:
if i didnt flash the china rom and restored the miui pie backup . on the first boot it wont ask my mi account ?.
Click to expand...
Click to collapse
It will ask, but you can skip, just select forgot password.

onlyninja said:
MIUI 10 based on Android Pie for Redmi Note 4X SD (mido)
Click to expand...
Click to collapse
Could you be Specific in this Stpe, Please :
Second, Step 2
Factory reset your phone (internal storage need not be wiped).
After Flashing the China Stable MIUI & lazyflasher
Should I Wipe Delvik,System,Cache,Vendor except Internal Storage, or, Should i Use Just use Swipe to Factory Reset from the TWRP Recovery ?
Please let me inform, if you could.
Thank you

I need the miuipro pie

xbgpx said:
copy to your drive n download
Click to expand...
Click to collapse
How to do that?

onlyninja said:
MIUI 10 based on Android Pie for Redmi Note 4X SD (mido)
Ported from Mi Max 3 (nitrogen)
Click to expand...
Click to collapse
Bugs I've found : MIUI 10 Pie Panipuri Ported Rom for Mido
*No FM Radio
*No Backlight fot hardware key
*After Changing Font,Display Font Changed to Default after every reboot
*Magisk CTS Profile : False. I've tried Universal SafetynetFix v3 still no luck
*Hostspot Not Working (though already mentioned)
*Suddenly Display wake up automatically with brightness
Is there any fix available ? Please let me know

Very mich appreciate your work...keep up the good work man

sufian.maverick said:
Bugs I've found : MIUI 10 Pie Panipuri Ported Rom for Mido
*No FM Radio
*No Backlight fot hardware key
*After Changing Font,Display Font Changed to Default after every reboot
*Magisk CTS Profile : False. I've tried Universal SafetynetFix v3 still no luck
*Hostspot Not Working (though already mentioned)
*Suddenly Display wake up automatically with brightness
Is there any fix available ? Please let me know
Click to expand...
Click to collapse
FM and HW Lights are fixed and will be pushed along next release. I'm looking into CTS and fonts.

VarunSolanki said:
Very mich appreciate your work...keep up the good work man
Click to expand...
Click to collapse
Thanks!

Will my recovery be replaced ?? Or its just like any other custom ROM?

AhmadJO said:
Will my recovery be replaced ?? Or its just like any other custom ROM?
Click to expand...
Click to collapse
It will not mess up recovery.

Upload mirror link please

Does N9 Pie Custom Room support galaxy s6 edge plus SM-G928c?

Hi guys I just got confused while was seeking for custom Room for galaxy s6 edge plus SM-G928C I have seen some custom Room but I said let me ask here for if N9 Pie Custom Room supports galaxy s6 edge plus SM-G928c?

Yes, there should be no problem supporting N928C. I will be working on lineage-16.0 for it when I finish with the Note 5, which has very similar sources to S6 edge+.

ripee said:
Yes, there should be no problem supporting N928C. I will be working on lineage-16.0 for it when I finish with the Note 5, which has very similar sources to S6 edge+.
Click to expand...
Click to collapse
waiting for it

utshiha/Exetools said:
waiting for it
Click to expand...
Click to collapse
You don't need to wait, theres a build for zenltejv on his Drive, check his signature for it and yes zenltejv build supports G928C.

DqrKn3Zz said:
You don't need to wait, theres a build for zenltejv on his Drive, check his signature for it and yes zenltejv build supports G928C.
Click to expand...
Click to collapse
link please

utshiha/Exetools said:
link please
Click to expand...
Click to collapse
Go to ripee's profile, click on his signature and go to zenltejv folder.

DqrKn3Zz said:
Go to ripee's profile, click on his signature and go to zenltejv folder.
Click to expand...
Click to collapse
any steps how to install it ?

utshiha/Exetools said:
any steps how to install it ?
Click to expand...
Click to collapse
It's simple:
Flash the zenltejv build, then the Gapps (optional) and Magisk (optional).

utshiha/Exetools said:
any steps how to install it ?
Click to expand...
Click to collapse
If your current build is one of enes's old zero builds that you managed to boot on your phone after flashing additional zip fixes in twrp, you can try dirty flashing my build because my zenlte sources are adapted from enes's zero sources. Do not flash any other zip fixes with my builds, and make sure to wipe cache and dalvik after flashing all the files and before rebooting into system.

ripee said:
If your current build is one of enes's old zero builds that you managed to boot on your phone after flashing additional zip fixes in twrp, you can try dirty flashing my build because my zenlte sources are adapted from enes's zero sources. Do not flash any other zip fixes with my builds, and make sure to wipe cache and dalvik after flashing all the files and before rebooting into system.
Click to expand...
Click to collapse
Which file should I download ?
zenlte or zenltetmo
There is no (zenltejv) in your Google drive
And plz Re-upload ( zenlte ) on others host
(Androidfilehost ) maybe . Everytime i get stuck at 80% when i download it . I have tried 3 laptop 3 different connections and browser , download tools
But still sticks at 80%
BTW I WANT ANDROID 10 ROOM