Right so many of us use stock rom on A500FU (2015) as its a good daily driver. Not the issue is I'm useless at compiling so is there anyone who can compile a stock kernel but... permissive as standard for us viper4android users and other reason, I'm sure there are 1000s who would appreciate it. I can provide the stock boot if nessacary
Sent from my SM-A500FU
jimbomodder said:
Right so many of us use stock rom on A500FU (2015) as its a good daily driver. Not the issue is I'm useless at compiling so is there anyone who can compile a stock kernel but... permissive as standard for us viper4android users and other reason, I'm sure there are 1000s who would appreciate it. I can provide the stock boot if nessacary
Sent from my SM-A500FU
Click to expand...
Click to collapse
Here you go:
A500FUXXU1BOL1_permissive_boot
.
ashyx said:
Here you go:
A500FUXXU1BOL1_permissive_boot
.
Click to expand...
Click to collapse
Thanks man but it hangs on splash then reboots constantly
Sent from my SM-A500FU
jimbomodder said:
Thanks man but it hangs on splash then reboots constantly
Sent from my SM-A500FU
Click to expand...
Click to collapse
Which firmware build are you on?
Can you post up your boot.img?
Try this one: A500FUXXU1BOL1_permissive_boot
ashyx said:
Which firmware build are you on?
Can you post up your boot.img?
Click to expand...
Click to collapse
Here you go
ashyx said:
Which firmware build are you on?
Can you post up your boot.img?
Try this one: A500FUXXU1BOL1_permissive_boot
Click to expand...
Click to collapse
Get kernel warning but just hangs at splash.
Sent from my SM-A500FU
jimbomodder said:
Get kernel warning but just hangs at splash.
Sent from my SM-A500FU
Click to expand...
Click to collapse
I have recompiled the kernel with no changes except set the enforcing flag to false and used your ramdisk.
If this doesn't boot then Samsungs source code is probably borked.
I have also uploaded a simply unpacked and repacked kernel with absolutely no changes. If this doesn't boot then there's an issue with simply repacking the kernel which could be because it is unsigned. This is not the first time Ive had this happen.
https://www.androidfilehost.com/?fid=24533103863137813
https://www.androidfilehost.com/?fid=24533103863137814
ashyx said:
I have recompiled the kernel with no changes except set the enforcing flag to false and used your ramdisk.
If this doesn't boot then Samsungs source code is probably borked.
I have also uploaded a simply unpacked and repacked kernel with absolutely no changes. If this doesn't boot then there's an issue with simply repacking the kernel which could be because it is unsigned. This is not the first time Ive had this happen.
https://www.androidfilehost.com/?fid=24533103863137813
https://www.androidfilehost.com/?fid=24533103863137814
Click to expand...
Click to collapse
First one hangs, second boots with the warning
jimbomodder said:
First one hangs, second boots with the warning
Click to expand...
Click to collapse
This is the exact same situation I had with the Tab A which uses the same platform and source code: Qualcomm MSM8916 Snapdragon 410.
Looks like again Samsung have fudged up the kernel source.
Are you able to set permissive via ADB or SElinux changer?
ashyx said:
This is the exact same situation I had with the Tab A which uses the same platform and source code: Qualcomm MSM8916 Snapdragon 410.
Looks like again Samsung have fudged up the kernel source.
Are you able to set permissive via ADB or SElinux changer?
Click to expand...
Click to collapse
Yeah selinux changer works fine. Thanks for the efforts
jimbomodder said:
Yeah selinux changer works fine. Thanks for the efforts
Click to expand...
Click to collapse
Well you're lucky that actually works. It usually doesn't.
Are you sure it states permissive in settings after using SElinux changer?
ashyx said:
Well you're lucky that actually works. It usually doesn't.
Are you sure it states permissive in settings after using SElinux changer?
Click to expand...
Click to collapse
Yes I check it, now and again Google flags as dangerous but I keep it lol
Sent from my SM-A500FU
jimbomodder said:
Yes I check it, now and again Google flags as dangerous but I keep it lol
Sent from my SM-A500FU
Click to expand...
Click to collapse
Any chance I can see a screen shot of that as its unusual?
ashyx said:
Any chance I can see a screen shot of that as its unusual?
Click to expand...
Click to collapse
The dangerous part? It normal as ive allowed google to check for harmful apps and an app they changes the selinux is dangerous to google, ill get one soon as currently on RR
Sent From either S4, S4 mini, S5 neo, A500FU, T210, T230
jimbomodder said:
The dangerous part? It normal as ive allowed google to check for harmful apps and an app they changes the selinux is dangerous to google, ill get one soon as currently on RR
Sent From either S4, S4 mini, S5 neo, A500FU, T210, T230
Click to expand...
Click to collapse
Just the about page where it says permissive.
ashyx said:
Just the about page where it says permissive.
Click to expand...
Click to collapse
I'll get it later today:good:
ashyx said:
Just the about page where it says permissive.
Click to expand...
Click to collapse
Better late than never
Highly unusual, every single Samsung 5.1.1 kernel I have compiled always has the enforcing flag set in the configuration without the ability to override unless the kernel is custom.
ashyx said:
Highly unusual, every single Samsung 5.1.1 kernel I have compiled always has the enforcing flag set in the configuration without the ability to override unless the kernel is custom.
Click to expand...
Click to collapse
Well it's actually 5.0.2, I just changed it in build prop. I also deleted some of the security apks and no longer get a warning that it's permissive and need to reboot, also the smart manager says system is secure. Running viper4android just fine
Related
I compiled a permissive kernel of SM-T705, based on the stock kernel, I basically changed nothing but the Selinux status. For those who do not like "enforcing" status, you can use this kernel for a while and wait for further optimisation.
I flashed this image with flashify on an SM T705, everything works fine.
(Just delete the spaces to get a working download url)
Permissive Stock Kernel
htt ps://w ww.drop box.com /s/ 6315d3co2uq2q2o /boot.img?dl=0
Permissive Stock Kernel with Devtmpfs support (this is for chroot users, since upgrading udev in a chroot environment needs devtmpfs support)
htt ps://w ww.drop box.com /s/ sa37vusag6b8577 /devboot.img?dl=0
direct download links are in #6 post. Sorry for the inconvenience
could someone tell me how to upload the img? I tried xda's "management attachment", but everytime I got the message "upload failed", and since I posted less then 10 posts here, I cannot use external links such as dropbox....
ninspector said:
could someone tell me how to upload the img? I tried xda's "management attachment", but everytime I got the message "upload failed", and since I posted less then 10 posts here, I cannot use external links such as dropbox....
Click to expand...
Click to collapse
Zip it up?
CZ Eddie said:
Zip it up?
Click to expand...
Click to collapse
I've already tried, still got the same message.
Deleted. Good work!
ninspector said:
Dear CZ Eddie,
You have received a new private message at xda-developers from ninspector, entitled "Could you please help me post the links?".
This is the message that was sent:
***************
Hello, could you please post the links below for me as a reply? I will then modify the thread to so as to let people know the download links are in your post.
Permissive Stock Kernel
https://www.dropbox.com/s/6315d3co2uq2q2o/boot.img?dl=0
Permissive Stock Kernel with Devtmpfs support
https://www.dropbox.com/s/sa37vusag6b8577/devboot.img?dl=0
***************
Click to expand...
Click to collapse
...as requested...
Just so everyone knows i flashed with my smt700 kernel works great if u need permissive (viper4android) til iron kernel or up in the air kernel comes out. There is a extra ,probably no sim icon in my statusbar but not a big deal e everything else works great......
Solved the Issue by holding Power+Vol down, and restoring to latest TWR back up.
anyone knows how to flash without freezing the tablet?
===============================
Hi
Just flashed this kernel to SM-T705 with 5.0.2 rom but after restart it is stuck on Samsung galaxy tab logo!
anyone knows how to restart or go into download mode ( pushing power off button even for a long time does nothing!)
thanks,
================================
you are usingTWRP? skyhigh kernel is now rolling out anyway, you can flash his kernel instead.
ninspector said:
I compiled a permissive kernel of SM-T705, based on the stock kernel, I basically changed nothing but the Selinux status. For those who do not like "enforcing" status, you can use this kernel for a while and wait for further optimisation.
I flashed this image with flashify on an SM T705, everything works fine.
(Just delete the spaces to get a working download url)
Permissive Stock Kernel
htt ps://w ww.drop box.com /s/ 6315d3co2uq2q2o /boot.img?dl=0
Permissive Stock Kernel with Devtmpfs support (this is for chroot users, since upgrading udev in a chroot environment needs devtmpfs support)
htt ps://w ww.drop box.com /s/ sa37vusag6b8577 /devboot.img?dl=0
direct download links are in #6 post. Sorry for the inconvenience
Click to expand...
Click to collapse
Please Send me this file, my Tab is bricked and I can't boot it, please
mehdi601f said:
Please Send me this file, my Tab is bricked and I can't boot it, please
Click to expand...
Click to collapse
which file you want?
My tablate boot isn't working
I need a boot image file to run my tablet with memory card and repair the main boot
Sent from my iPhone using Tapatalk
Cannot download, the link deleted?
Can you upload again as I need this and thanks so much~~~
simon330 said:
Cannot download, the link deleted?
Can you upload again as I need this and thanks so much~~~
Click to expand...
Click to collapse
You know there's loads of custom kernels available or you can just flash the stock firmware right?
Discontinued/Deleted
..
Thanks for extending material love to Viper. Now look in line with material look of Poweramp
n1729m said:
Thanks for extending material love to Viper. Now look in line with material look of Poweramp
Click to expand...
Click to collapse
There is already one available Here.
http://forum.xda-developers.com/showpost.php?p=62468476&postcount=1158
?
guitardedhero said:
http://forum.xda-developers.com/showpost.php?p=62468476&postcount=1158
?
Click to expand...
Click to collapse
What exactly is your question?
EDIT: Oh I see, I didn't notice at first, looks like someone shared my links, thanks for letting me know.
Nice! DragonFi just doesn't work with my M9. So glad this does, definitely a noticeable improvement in sound quality.
I tried the APK version first and every time I tried opening it, it'd open another app of mine asking to import a database. Not sure what that's all about but the ZIP flashed fine.
Alcolawl said:
Nice! DragonFi just doesn't work with my M9. So glad this does, definitely a noticeable improvement in sound quality.
I tried the APK version first and every time I tried opening it, it'd open another app of mine asking to import a database. Not sure what that's all about but the ZIP flashed fine.
Click to expand...
Click to collapse
What in Dragon-Fi is not working? the Dolby app? if so you may need Permissive for your kernel? unsure also the APKs do work but I guess something could be goofy if your ROM, which ROM are you using? but regardless if ZIP worked fine then I guess you may be happier about that sense V4A is now a system app
I use Dragon-Fi for the system files only, I skip all the Dolby stuff and I notice a good difference in audio quality, so it should be working for you, but I am on the M8, I never tried it on M9 personally.
Just for your convenience I have updated the thread to confirm that Marshmallow is indeed supported! :good:
hi nice app
can you add the ViPER4Android-supolicy.zip into this zip if possible so that Viper4Android work with SELinux enforced mode
question on driver status
Viper4713 said:
There is already one available Here.
Click to expand...
Click to collapse
I had to do the whole 9 yards with my Sprint HTC One m7 last time I put Viper4Android for lollipop on it (5.0.2). Selenix fix and flashing the zip, all I did was install the dark (had to RUU the device to get 6.23.651.10 on it) and driver status reads:
Driver Version : 2.3.4.0
NEON Enabled : Yes
Enabled : Yes
Status : Normal
Audio Format : Supported
Processing : Yes
Sampling Rate : 48000
Do not believe I have ever had the NEON enabled, just trying on phone speakers now............. WOW
cannot wait until the bluetooth cubes come off charge
zach
Viper is the make or break for staying on MM for me. Neither APK nor ZIP flash working for me.
J_awn said:
Viper is the make or break for staying on MM for me. Neither APK nor ZIP flash working for me.
Click to expand...
Click to collapse
Try the zip attached below.
guitardedhero said:
Try the zip attached below.
Click to expand...
Click to collapse
Is it for enforcing or permissive kernel ? And is it thr dark or light version ? Thanks
Sent from my Nexus 5
[Gorgasm] said:
Is it for enforcing or permissive kernel ? And is it thr dark or light version ? Thanks
Sent from my Nexus 5
Click to expand...
Click to collapse
Enforcing
Dark
guitardedhero said:
Enforcing
Dark
Click to expand...
Click to collapse
Do you think that it is possible to fix the light theme too ?
[Gorgasm] said:
Do you think that it is possible to fix the light theme too ?
Click to expand...
Click to collapse
Absolutely.
guitardedhero said:
Absolutely.
Click to expand...
Click to collapse
Does not work here.Gives error flashing this..Android mm gpe..
altetaube said:
Does not work here.Gives error flashing this..Android mm gpe..
Click to expand...
Click to collapse
What error?
It only works in FX Compatibility Mode for me on my N4 using the APK method.. I use Google Play Music, haven't tried Spotify or Pandora yet.
EDIT: It worked normally after flashing the ZIP. Thanks!
Does anybody know a way to make Viper4Android work on roms with new firmware like XXUHPF1. I'm using MBP V5 by melekbarca on the i9500. I already have try unchecking the mount separate option in super su but didn't work. Also tried this in other roms like albe95 and inferno but no luck.
I apologize for my English and my lack of experience.
Because, most probably, the selinux is set to enforcing. Viper4Android needs to to be permissive.
GDReaper said:
Because, most probably, the selinux is set to enforcing. Viper4Android needs to to be permissive.
Click to expand...
Click to collapse
Thank you for your answer but I don't think that's the problem cause I have try using Setlinux mode changer and also had try with versions of viper that don't require permissive kernell and nothing works.
GDReaper said:
Because, most probably, the selinux is set to enforcing. Viper4Android needs to to be permissive.
Click to expand...
Click to collapse
Well actually it seems you were right. I try installing different kernels but had no luck; till I installed stock Permissive Kernel By @AL_IRAQI (http://forum.xda-developers.com/showpost.php?p=59507846&postcount=4860) and untick the separate mount option in super su. Now it works :laugh: . Thanks for the answer
Good to know you solved your problem.
To be noted that stock Samsung kernel is always enforcing, even after you use SELinux mode changer to change your SELinux status.
Sent from my ASUS_Z00AD using XDA Labs
Hey dear friends!
I just wanna know about Development for Samsung Galaxy J3 SM-327U
CUSTOMS ROMS, KERNELS? I´m owner this device and I feel so sad because, don´t have much development
Fdraco10 said:
Hey dear friends!
I just wanna know about Development for Samsung Galaxy J3 SM-327U
CUSTOMS ROMS, KERNELS? I´m owner this device and I feel so sad because, don´t have much development
Click to expand...
Click to collapse
most devs work only on their own free time and sometimes they do not have the device or they have had it but got rid of it. it may take a year or two before a custom rom will release as it is typical for phones under the budget category. (under $200) devices that are expensive get more developement due to alot of people focusing only on the greatest and latest.
Fdraco10 said:
Hey dear friends!
I just wanna know about Development for Samsung Galaxy J3 SM-327U
CUSTOMS ROMS, KERNELS? I´m owner this device and I feel so sad because, don´t have much development
Click to expand...
Click to collapse
Do you have root? I can help if you have firmware
Sands207 said:
Do you have root? I can help if you have firmware
Click to expand...
Click to collapse
Yeah, my device rooted with Magisk
Sands207 said:
Do you have root? I can help if you have firmware
Click to expand...
Click to collapse
Yeah, my device rooted with Magisk..
Fdraco10 said:
Yeah, my device rooted with Magisk..
Click to expand...
Click to collapse
Do you have a link to your firmware?
Sands207 said:
Do you have a link to your firmware?
Click to expand...
Click to collapse
Yeah, Take it!
https://updato.com/firmware-archive-select-model?record=8592C42FBEB311E7963AFA163EE8F90B
Fdraco10 said:
Yeah, Take it!
https://updato.com/firmware-archive-select-model?record=8592C42FBEB311E7963AFA163EE8F90B
Click to expand...
Click to collapse
Will do! ill post here when i finish. Do you have twrp or are you using odin to flash files? Also what is your carrier?
Rom Uploading
I was able to successfully able to build your ROM and I will make a seperate thread for testing. I uploaded TWRP by @ashyx https://forum.xda-developers.com/ga...nt/ecovery-root-twrp-3-1-1-1-samsung-t3709987 so new users to this thread can easily find and use it please make a donation to him for his hard work! Please make a donation if you find this Rom helpful,it's how I survive!
https://www.paypal.me/Sands207
Here are the features:
Device Model : samsung -- SM-J327U
--ARCHITECTURE: armeabi-v7a
--ANDROID VERSION: 7.0 -- 24
--Root status: YES
--Busybox : YES
--Sqlite : YES
--Init.d at android system and kernel level: YES
--Deknoxed: YES
--Debloated:YES but need feedback on what can go!
--Zipaligned: YES
--Deodexed: YES
--SU.D Enabled: YES
Kernel Tweaks:
Dm-Verity Disabled
Force Encrytion Disabled
Init script Support added!
All files including TWRP are here Here are the features:
Device Model : samsung -- SM-J327U
--ARCHITECTURE: armeabi-v7a
--ANDROID VERSION: 7.0 -- 24
--Root status: YES
--Busybox : YES
--Sqlite : YES
--Init.d at android system and kernel level: YES
--Deknoxed: YES
--Debloated:YES but need feedback on what can go!
--Zipaligned: YES
--Deodexed: YES
--SU.D Enabled: YES
Kernel Tweaks:
Dm-Verity Disabled
Force Encrytion Disabled
Init script Support added!
https://drive.google.com/drive/folders/1i86GtQFa_wahSENDUdvQRzvah9g0B2Ma?usp=sharing
There are two versions, one is to be flashed in TWRP as a normal zip and you must type YES in twrp wipe settings to format data,reboot recovery and then wipe all except external sd and otg! Proceed to flash the Rom and then reboot. First boot may take a LONG time so be patient!! Let me know what works and what doesn't. Consider this to be in TESTING phase so don't use it as a daily driver until you are sure it works for you! The other for Odin, I would use the latest version!
sands207 said:
i was able to successfully able to build your rom and i will make a seperate thread for testing. I uploaded twrp by @ashyx https://forum.xda-developers.com/ga...nt/ecovery-root-twrp-3-1-1-1-samsung-t3709987 so new users to this thread can easily find and use it please make a donation to him for his hard work! Please make a donation if you find this rom helpful,it's how i survive!
https://www.paypal.me/sands207
here are the features:
Device model : Samsung -- sm-j327u
--architecture: Armeabi-v7a
--android version: 7.0 -- 24
--root status: Yes
--busybox : Yes
--sqlite : Yes
--init.d at android system and kernel level: Yes
--deknoxed: Yes
--debloated:yes but need feedback on what can go!
--zipaligned: Yes
--deodexed: Yes
--su.d enabled: Yes
kernel tweaks:
Dm-verity disabled
force encrytion disabled
init script support added!
All files including twrp are here here are the features:
Device model : Samsung -- sm-j327u
--architecture: Armeabi-v7a
--android version: 7.0 -- 24
--root status: Yes
--busybox : Yes
--sqlite : Yes
--init.d at android system and kernel level: Yes
--deknoxed: Yes
--debloated:yes but need feedback on what can go!
--zipaligned: Yes
--deodexed: Yes
--su.d enabled: Yes
kernel tweaks:
Dm-verity disabled
force encrytion disabled
init script support added!
https://drive.google.com/drive/folders/1i86gtqfa_wahsendudvqrzvah9g0b2ma?usp=sharing
there are two versions, one is to be flashed in twrp as a normal zip and you must type yes in twrp wipe settings to format data,reboot recovery and then wipe all except external sd and otg! Proceed to flash the rom and then reboot. First boot may take a long time so be patient!! Let me know what works and what doesn't. Consider this to be in testing phase so don't use it as a daily driver until you are sure it works for you! The other for odin, i would use the latest version!
Click to expand...
Click to collapse
oh man! Thanks so much! I will try it later!!
Fdraco10 said:
oh man! Thanks so much! I will try it later!!
Click to expand...
Click to collapse
Please do and you are very welcome! I'm happy to help in any way i can ?
Sands207 said:
Please do and you are very welcome! I'm happy to help in any way i can
Click to expand...
Click to collapse
You´re so beautiful!
Just wondering if SElinux has to be set to permissive for everything to work? In using H910 variant. Fingerprint works. If It can be set to enforcing, how do I change it? I used permissiver.zip to change it to permissive and don't know how to change it back if I need to. Any help is appreciated. Thanks. Also safetynet passes right now and using LSposed.
did you find the answer to this? the zach selinux zip I normally use on stock does not work for me.
ezzony said:
did you find the answer to this? the zach selinux zip I normally use on stock does not work for me.
Click to expand...
Click to collapse
Never found an answer... I have a OnePlus 7t pro now. It was a post that I read though, that said it had to be permissive for everything to work properly. Not sure though
^^Yeah well who knows. Driving me crazy. Could be a bug in the latest build. Giving me a real headache trying to work it out. I'm going to try using the lineage recovery instead of twrp and if that don't work I'll give up. Thanks, and ohh a 7tPro sounds nice : )
ezzony said:
^^Yeah well who knows. Driving me crazy. Could be a bug in the latest build. Giving me a real headache trying to work it out. I'm going to try using the lineage recovery instead of twrp and if that don't work I'll give up. Thanks, and ohh a 7tPro sounds nice : )
Click to expand...
Click to collapse
It's very nice, just no fully functional TWRP that I can find yet... Only usable to flash ROMs basically
parag0n1986 said:
It's very nice, just no fully functional TWRP that I can find yet... Only usable to flash ROMs basically
Click to expand...
Click to collapse
it's didn't work. I got kernel crash using lineage recovery. So even the recovery is not working for me. This is going well lol. Phew I was able to flash back twrp via fastboot.
Right, and all of a sudden seems problem is solved.
By complete chance I was reading this https://forum.xda-developers.com/t/conversion-of-lg-v20-f800.4161453/#post-84791351
There is a link to a flashable zip to set selinux policy permissive. A different one to the one I usually use by @Zachpth5. This allows the camera driver to load.
https://drive.google.com/file/d/1CRgp7awT86MfRTE2Os1h6fcc7MfPkeLV/view?usp=sharing
Edit: just use selinuxmodechanger apk instead. Can't belive I didn't know about that app 'till now lol